mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 1/3] highbank: add xgmac support
Date: Mon, 11 Feb 2013 18:13:52 +0100	[thread overview]
Message-ID: <1360602834-12373-1-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <20130211171031.GZ19322@game.jcrosoft.org>

Cc: Rob Herring <rob.herring@calxeda.com
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/net/Kconfig  |    3 +
 drivers/net/Makefile |    1 +
 drivers/net/xgmac.c  |  731 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 735 insertions(+)
 create mode 100644 drivers/net/xgmac.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cf6ceee..bcf245d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -27,6 +27,9 @@ menu "Network drivers"
 
 source "drivers/net/phy/Kconfig"
 
+config DRIVER_NET_CALXEDA_XGMAC
+	bool "Calxeda xgmac"
+
 config DRIVER_NET_CS8900
 	bool "cs8900 ethernet driver"
 	depends on HAS_CS8900
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6e1aeaa..42136f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC)	+= xgmac.o
 obj-$(CONFIG_DRIVER_NET_CS8900)		+= cs8900.o
 obj-$(CONFIG_DRIVER_NET_CPSW)		+= cpsw.o
 obj-$(CONFIG_DRIVER_NET_SMC911X)	+= smc911x.o
diff --git a/drivers/net/xgmac.c b/drivers/net/xgmac.c
new file mode 100644
index 0000000..04630b0
--- /dev/null
+++ b/drivers/net/xgmac.c
@@ -0,0 +1,731 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <clock.h>
+#include <malloc.h>
+#include <xfuncs.h>
+#include <init.h>
+#include <errno.h>
+#include <io.h>
+#include <linux/err.h>
+#include <asm/mmu.h>
+
+#define TX_NUM_DESC			1
+#define RX_NUM_DESC			32
+
+#define ETH_BUF_SZ			2048
+#define TX_BUF_SZ			(ETH_BUF_SZ * TX_NUM_DESC)
+#define RX_BUF_SZ			(ETH_BUF_SZ * RX_NUM_DESC)
+
+/* XGMAC Register definitions */
+#define XGMAC_CONTROL		0x00000000	/* MAC Configuration */
+#define XGMAC_FRAME_FILTER	0x00000004	/* MAC Frame Filter */
+#define XGMAC_FLOW_CTRL		0x00000018	/* MAC Flow Control */
+#define XGMAC_VLAN_TAG		0x0000001C	/* VLAN Tags */
+#define XGMAC_VERSION		0x00000020	/* Version */
+#define XGMAC_VLAN_INCL		0x00000024	/* VLAN tag for tx frames */
+#define XGMAC_LPI_CTRL		0x00000028	/* LPI Control and Status */
+#define XGMAC_LPI_TIMER		0x0000002C	/* LPI Timers Control */
+#define XGMAC_TX_PACE		0x00000030	/* Transmit Pace and Stretch */
+#define XGMAC_VLAN_HASH		0x00000034	/* VLAN Hash Table */
+#define XGMAC_DEBUG		0x00000038	/* Debug */
+#define XGMAC_INT_STAT		0x0000003C	/* Interrupt and Control */
+#define XGMAC_ADDR_HIGH(reg)	(0x00000040 + ((reg) * 8))
+#define XGMAC_ADDR_LOW(reg)	(0x00000044 + ((reg) * 8))
+#define XGMAC_HASH(n)		(0x00000300 + (n) * 4) /* HASH table regs */
+#define XGMAC_NUM_HASH		16
+#define XGMAC_OMR		0x00000400
+#define XGMAC_REMOTE_WAKE	0x00000700	/* Remote Wake-Up Frm Filter */
+#define XGMAC_PMT		0x00000704	/* PMT Control and Status */
+#define XGMAC_MMC_CTRL		0x00000800	/* XGMAC MMC Control */
+#define XGMAC_MMC_INTR_RX	0x00000804	/* Recieve Interrupt */
+#define XGMAC_MMC_INTR_TX	0x00000808	/* Transmit Interrupt */
+#define XGMAC_MMC_INTR_MASK_RX	0x0000080c	/* Recieve Interrupt Mask */
+#define XGMAC_MMC_INTR_MASK_TX	0x00000810	/* Transmit Interrupt Mask */
+
+
+/* Hardware TX Statistics Counters */
+#define XGMAC_MMC_TXOCTET_GB_LO	0x00000814
+#define XGMAC_MMC_TXOCTET_GB_HI	0x00000818
+#define XGMAC_MMC_TXFRAME_GB_LO	0x0000081C
+#define XGMAC_MMC_TXFRAME_GB_HI	0x00000820
+#define XGMAC_MMC_TXBCFRAME_G	0x00000824
+#define XGMAC_MMC_TXMCFRAME_G	0x0000082C
+#define XGMAC_MMC_TXUCFRAME_GB	0x00000864
+#define XGMAC_MMC_TXMCFRAME_GB	0x0000086C
+#define XGMAC_MMC_TXBCFRAME_GB	0x00000874
+#define XGMAC_MMC_TXUNDERFLOW	0x0000087C
+#define XGMAC_MMC_TXOCTET_G_LO	0x00000884
+#define XGMAC_MMC_TXOCTET_G_HI	0x00000888
+#define XGMAC_MMC_TXFRAME_G_LO	0x0000088C
+#define XGMAC_MMC_TXFRAME_G_HI	0x00000890
+#define XGMAC_MMC_TXPAUSEFRAME	0x00000894
+#define XGMAC_MMC_TXVLANFRAME	0x0000089C
+
+/* Hardware RX Statistics Counters */
+#define XGMAC_MMC_RXFRAME_GB_LO	0x00000900
+#define XGMAC_MMC_RXFRAME_GB_HI	0x00000904
+#define XGMAC_MMC_RXOCTET_GB_LO	0x00000908
+#define XGMAC_MMC_RXOCTET_GB_HI	0x0000090C
+#define XGMAC_MMC_RXOCTET_G_LO	0x00000910
+#define XGMAC_MMC_RXOCTET_G_HI	0x00000914
+#define XGMAC_MMC_RXBCFRAME_G	0x00000918
+#define XGMAC_MMC_RXMCFRAME_G	0x00000920
+#define XGMAC_MMC_RXCRCERR	0x00000928
+#define XGMAC_MMC_RXRUNT	0x00000930
+#define XGMAC_MMC_RXJABBER	0x00000934
+#define XGMAC_MMC_RXUCFRAME_G	0x00000970
+#define XGMAC_MMC_RXLENGTHERR	0x00000978
+#define XGMAC_MMC_RXPAUSEFRAME	0x00000988
+#define XGMAC_MMC_RXOVERFLOW	0x00000990
+#define XGMAC_MMC_RXVLANFRAME	0x00000998
+#define XGMAC_MMC_RXWATCHDOG	0x000009a0
+
+/* DMA Control and Status Registers */
+#define XGMAC_DMA_BUS_MODE	0x00000f00	/* Bus Mode */
+#define XGMAC_DMA_TX_POLL	0x00000f04	/* Transmit Poll Demand */
+#define XGMAC_DMA_RX_POLL	0x00000f08	/* Received Poll Demand */
+#define XGMAC_DMA_RX_BASE_ADDR	0x00000f0c	/* Receive List Base */
+#define XGMAC_DMA_TX_BASE_ADDR	0x00000f10	/* Transmit List Base */
+#define XGMAC_DMA_STATUS	0x00000f14	/* Status Register */
+#define XGMAC_DMA_CONTROL	0x00000f18	/* Ctrl (Operational Mode) */
+#define XGMAC_DMA_INTR_ENA	0x00000f1c	/* Interrupt Enable */
+#define XGMAC_DMA_MISS_FRAME_CTR 0x00000f20	/* Missed Frame Counter */
+#define XGMAC_DMA_RI_WDOG_TIMER	0x00000f24	/* RX Intr Watchdog Timer */
+#define XGMAC_DMA_AXI_BUS	0x00000f28	/* AXI Bus Mode */
+#define XGMAC_DMA_AXI_STATUS	0x00000f2C	/* AXI Status */
+#define XGMAC_DMA_HW_FEATURE	0x00000f58	/* Enabled Hardware Features */
+
+#define XGMAC_ADDR_AE		0x80000000
+#define XGMAC_MAX_FILTER_ADDR	31
+
+/* PMT Control and Status */
+#define XGMAC_PMT_POINTER_RESET	0x80000000
+#define XGMAC_PMT_GLBL_UNICAST	0x00000200
+#define XGMAC_PMT_WAKEUP_RX_FRM	0x00000040
+#define XGMAC_PMT_MAGIC_PKT	0x00000020
+#define XGMAC_PMT_WAKEUP_FRM_EN	0x00000004
+#define XGMAC_PMT_MAGIC_PKT_EN	0x00000002
+#define XGMAC_PMT_POWERDOWN	0x00000001
+
+#define XGMAC_CONTROL_SPD	0x40000000	/* Speed control */
+#define XGMAC_CONTROL_SPD_MASK	0x60000000
+#define XGMAC_CONTROL_SPD_1G	0x60000000
+#define XGMAC_CONTROL_SPD_2_5G	0x40000000
+#define XGMAC_CONTROL_SPD_10G	0x00000000
+#define XGMAC_CONTROL_SARC	0x10000000	/* Source Addr Insert/Replace */
+#define XGMAC_CONTROL_SARK_MASK	0x18000000
+#define XGMAC_CONTROL_CAR	0x04000000	/* CRC Addition/Replacement */
+#define XGMAC_CONTROL_CAR_MASK	0x06000000
+#define XGMAC_CONTROL_DP	0x01000000	/* Disable Padding */
+#define XGMAC_CONTROL_WD	0x00800000	/* Disable Watchdog on rx */
+#define XGMAC_CONTROL_JD	0x00400000	/* Jabber disable */
+#define XGMAC_CONTROL_JE	0x00100000	/* Jumbo frame */
+#define XGMAC_CONTROL_LM	0x00001000	/* Loop-back mode */
+#define XGMAC_CONTROL_IPC	0x00000400	/* Checksum Offload */
+#define XGMAC_CONTROL_ACS	0x00000080	/* Automatic Pad/FCS Strip */
+#define XGMAC_CONTROL_DDIC	0x00000010	/* Disable Deficit Idle Count */
+#define XGMAC_CONTROL_TE	0x00000008	/* Transmitter Enable */
+#define XGMAC_CONTROL_RE	0x00000004	/* Receiver Enable */
+
+/* XGMAC Frame Filter defines */
+#define XGMAC_FRAME_FILTER_PR	0x00000001	/* Promiscuous Mode */
+#define XGMAC_FRAME_FILTER_HUC	0x00000002	/* Hash Unicast */
+#define XGMAC_FRAME_FILTER_HMC	0x00000004	/* Hash Multicast */
+#define XGMAC_FRAME_FILTER_DAIF	0x00000008	/* DA Inverse Filtering */
+#define XGMAC_FRAME_FILTER_PM	0x00000010	/* Pass all multicast */
+#define XGMAC_FRAME_FILTER_DBF	0x00000020	/* Disable Broadcast frames */
+#define XGMAC_FRAME_FILTER_SAIF	0x00000100	/* Inverse Filtering */
+#define XGMAC_FRAME_FILTER_SAF	0x00000200	/* Source Address Filter */
+#define XGMAC_FRAME_FILTER_HPF	0x00000400	/* Hash or perfect Filter */
+#define XGMAC_FRAME_FILTER_VHF	0x00000800	/* VLAN Hash Filter */
+#define XGMAC_FRAME_FILTER_VPF	0x00001000	/* VLAN Perfect Filter */
+#define XGMAC_FRAME_FILTER_RA	0x80000000	/* Receive all mode */
+
+#define FIFO_MINUS_1K			0x0
+#define FIFO_MINUS_2K			0x1
+#define FIFO_MINUS_3K			0x2
+#define FIFO_MINUS_4K			0x3
+#define FIFO_MINUS_6K			0x4
+#define FIFO_MINUS_8K			0x5
+#define FIFO_MINUS_12K			0x6
+#define FIFO_MINUS_16K			0x7
+
+/* XGMAC FLOW CTRL defines */
+#define XGMAC_FLOW_CTRL_PT_MASK	0xffff0000	/* Pause Time Mask */
+#define XGMAC_FLOW_CTRL_PT_SHIFT	16
+#define XGMAC_FLOW_CTRL_DZQP	0x00000080	/* Disable Zero-Quanta Phase */
+#define XGMAC_FLOW_CTRL_PLT	0x00000020	/* Pause Low Threshhold */
+#define XGMAC_FLOW_CTRL_PLT_SHIFT	4
+#define XGMAC_FLOW_CTRL_PLT_MASK 0x00000030	/* PLT MASK */
+#define XGMAC_FLOW_CTRL_UP	0x00000008	/* Unicast Pause Frame Detect */
+#define XGMAC_FLOW_CTRL_RFE	0x00000004	/* Rx Flow Control Enable */
+#define XGMAC_FLOW_CTRL_TFE	0x00000002	/* Tx Flow Control Enable */
+#define XGMAC_FLOW_CTRL_FCB_BPA	0x00000001	/* Flow Control Busy ... */
+
+/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMT	0x0080		/* PMT Interrupt Status */
+#define XGMAC_INT_STAT_LPI	0x0040		/* LPI Interrupt Status */
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
+#define DMA_BUS_MODE_DSL_MASK	0x0000007c	/* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT	2		/* (in DWORDS) */
+#define DMA_BUS_MODE_ATDS	0x00000080	/* Alternate Descriptor Size */
+
+/* Programmable burst length */
+#define DMA_BUS_MODE_PBL_MASK	0x00003f00	/* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT	8
+#define DMA_BUS_MODE_FB		0x00010000	/* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK	0x003e0000	/* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT	17
+#define DMA_BUS_MODE_USP	0x00800000
+#define DMA_BUS_MODE_8PBL	0x01000000
+#define DMA_BUS_MODE_AAL	0x02000000
+
+#define DMA_AXIMODE_ENLPI	0x80000000
+#define DMA_AXIMODE_MGK		0x40000000
+#define DMA_AXIMODE_WROSR	0x00100000
+#define DMA_AXIMODE_WROSR_MASK	0x00F00000
+#define DMA_AXIMODE_WROSR_SHIFT	20
+#define DMA_AXIMODE_RDOSR	0x00010000
+#define DMA_AXIMODE_RDOSR_MASK	0x000F0000
+#define DMA_AXIMODE_RDOSR_SHIFT	16
+#define DMA_AXIMODE_AAL		0x00001000
+#define DMA_AXIMODE_BLEN256	0x00000080
+#define DMA_AXIMODE_BLEN128	0x00000040
+#define DMA_AXIMODE_BLEN64	0x00000020
+#define DMA_AXIMODE_BLEN32	0x00000010
+#define DMA_AXIMODE_BLEN16	0x00000008
+#define DMA_AXIMODE_BLEN8	0x00000004
+#define DMA_AXIMODE_BLEN4	0x00000002
+#define DMA_AXIMODE_UNDEF	0x00000001
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK	0x0000c000	/* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT	14
+#define DMA_BUS_FB		0x00010000	/* Fixed Burst */
+
+/* DMA Control register defines */
+#define DMA_CONTROL_ST		0x00002000	/* Start/Stop Transmission */
+#define DMA_CONTROL_SR		0x00000002	/* Start/Stop Receive */
+#define DMA_CONTROL_DFF		0x01000000	/* Disable flush of rx frames */
+
+/* DMA Normal interrupt */
+#define DMA_INTR_ENA_NIE	0x00010000	/* Normal Summary */
+#define DMA_INTR_ENA_AIE	0x00008000	/* Abnormal Summary */
+#define DMA_INTR_ENA_ERE	0x00004000	/* Early Receive */
+#define DMA_INTR_ENA_FBE	0x00002000	/* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE	0x00000400	/* Early Transmit */
+#define DMA_INTR_ENA_RWE	0x00000200	/* Receive Watchdog */
+#define DMA_INTR_ENA_RSE	0x00000100	/* Receive Stopped */
+#define DMA_INTR_ENA_RUE	0x00000080	/* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_RIE	0x00000040	/* Receive Interrupt */
+#define DMA_INTR_ENA_UNE	0x00000020	/* Tx Underflow */
+#define DMA_INTR_ENA_OVE	0x00000010	/* Receive Overflow */
+#define DMA_INTR_ENA_TJE	0x00000008	/* Transmit Jabber */
+#define DMA_INTR_ENA_TUE	0x00000004	/* Transmit Buffer Unavail */
+#define DMA_INTR_ENA_TSE	0x00000002	/* Transmit Stopped */
+#define DMA_INTR_ENA_TIE	0x00000001	/* Transmit Interrupt */
+
+#define DMA_INTR_NORMAL		(DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+				 DMA_INTR_ENA_TUE)
+
+#define DMA_INTR_ABNORMAL	(DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+				 DMA_INTR_ENA_RWE | DMA_INTR_ENA_RSE | \
+				 DMA_INTR_ENA_RUE | DMA_INTR_ENA_UNE | \
+				 DMA_INTR_ENA_OVE | DMA_INTR_ENA_TJE | \
+				 DMA_INTR_ENA_TSE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK	(DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* DMA Status register defines */
+#define DMA_STATUS_GMI		0x08000000	/* MMC interrupt */
+#define DMA_STATUS_GLI		0x04000000	/* GMAC Line interface int */
+#define DMA_STATUS_EB_MASK	0x00380000	/* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT	0x00080000	/* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT	0x00100000	/* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK	0x00700000	/* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT	20
+#define DMA_STATUS_RS_MASK	0x000e0000	/* Receive Process State */
+#define DMA_STATUS_RS_SHIFT	17
+#define DMA_STATUS_NIS		0x00010000	/* Normal Interrupt Summary */
+#define DMA_STATUS_AIS		0x00008000	/* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI		0x00004000	/* Early Receive Interrupt */
+#define DMA_STATUS_FBI		0x00002000	/* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI		0x00000400	/* Early Transmit Interrupt */
+#define DMA_STATUS_RWT		0x00000200	/* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS		0x00000100	/* Receive Process Stopped */
+#define DMA_STATUS_RU		0x00000080	/* Receive Buffer Unavailable */
+#define DMA_STATUS_RI		0x00000040	/* Receive Interrupt */
+#define DMA_STATUS_UNF		0x00000020	/* Transmit Underflow */
+#define DMA_STATUS_OVF		0x00000010	/* Receive Overflow */
+#define DMA_STATUS_TJT		0x00000008	/* Transmit Jabber Timeout */
+#define DMA_STATUS_TU		0x00000004	/* Transmit Buffer Unavail */
+#define DMA_STATUS_TPS		0x00000002	/* Transmit Process Stopped */
+#define DMA_STATUS_TI		0x00000001	/* Transmit Interrupt */
+
+/* Common MAC defines */
+#define MAC_ENABLE_TX		0x00000008	/* Transmitter Enable */
+#define MAC_ENABLE_RX		0x00000004	/* Receiver Enable */
+
+/* XGMAC Operation Mode Register */
+#define XGMAC_OMR_TSF		0x00200000	/* TX FIFO Store and Forward */
+#define XGMAC_OMR_FTF		0x00100000	/* Flush Transmit FIFO */
+#define XGMAC_OMR_TTC		0x00020000	/* Transmit Threshhold Ctrl */
+#define XGMAC_OMR_TTC_SHIFT	16
+#define XGMAC_OMR_TTC_MASK	0x00030000
+#define XGMAC_OMR_RFD		0x00006000	/* FC Deactivation Threshhold */
+#define XGMAC_OMR_RFD_SHIFT	12
+#define XGMAC_OMR_RFD_MASK	0x00007000	/* FC Deact Threshhold MASK */
+#define XGMAC_OMR_RFA		0x00000600	/* FC Activation Threshhold */
+#define XGMAC_OMR_RFA_SHIFT	9
+#define XGMAC_OMR_RFA_MASK	0x00000E00	/* FC Act Threshhold MASK */
+#define XGMAC_OMR_EFC		0x00000100	/* Enable Hardware FC */
+#define XGMAC_OMR_FEF		0x00000080	/* Forward Error Frames */
+#define XGMAC_OMR_DT		0x00000040	/* Drop TCP/IP csum Errors */
+#define XGMAC_OMR_RSF		0x00000020	/* RX FIFO Store and Forward */
+#define XGMAC_OMR_RTC_256	0x00000018	/* RX Threshhold Ctrl */
+#define XGMAC_OMR_RTC_MASK	0x00000018	/* RX Threshhold Ctrl MASK */
+
+/* XGMAC HW Features Register */
+#define DMA_HW_FEAT_TXCOESEL	0x00010000	/* TX Checksum offload */
+
+#define XGMAC_MMC_CTRL_CNT_FRZ	0x00000008
+
+/* XGMAC Descriptor Defines */
+#define MAX_DESC_BUF_SZ		(0x2000 - 8)
+
+#define RXDESC_EXT_STATUS	0x00000001
+#define RXDESC_CRC_ERR		0x00000002
+#define RXDESC_RX_ERR		0x00000008
+#define RXDESC_RX_WDOG		0x00000010
+#define RXDESC_FRAME_TYPE	0x00000020
+#define RXDESC_GIANT_FRAME	0x00000080
+#define RXDESC_LAST_SEG		0x00000100
+#define RXDESC_FIRST_SEG	0x00000200
+#define RXDESC_VLAN_FRAME	0x00000400
+#define RXDESC_OVERFLOW_ERR	0x00000800
+#define RXDESC_LENGTH_ERR	0x00001000
+#define RXDESC_SA_FILTER_FAIL	0x00002000
+#define RXDESC_DESCRIPTOR_ERR	0x00004000
+#define RXDESC_ERROR_SUMMARY	0x00008000
+#define RXDESC_FRAME_LEN_OFFSET	16
+#define RXDESC_FRAME_LEN_MASK	0x3fff0000
+#define RXDESC_DA_FILTER_FAIL	0x40000000
+
+#define RXDESC1_END_RING	0x00008000
+
+#define RXDESC_IP_PAYLOAD_MASK	0x00000003
+#define RXDESC_IP_PAYLOAD_UDP	0x00000001
+#define RXDESC_IP_PAYLOAD_TCP	0x00000002
+#define RXDESC_IP_PAYLOAD_ICMP	0x00000003
+#define RXDESC_IP_HEADER_ERR	0x00000008
+#define RXDESC_IP_PAYLOAD_ERR	0x00000010
+#define RXDESC_IPV4_PACKET	0x00000040
+#define RXDESC_IPV6_PACKET	0x00000080
+#define TXDESC_UNDERFLOW_ERR	0x00000001
+#define TXDESC_JABBER_TIMEOUT	0x00000002
+#define TXDESC_LOCAL_FAULT	0x00000004
+#define TXDESC_REMOTE_FAULT	0x00000008
+#define TXDESC_VLAN_FRAME	0x00000010
+#define TXDESC_FRAME_FLUSHED	0x00000020
+#define TXDESC_IP_HEADER_ERR	0x00000040
+#define TXDESC_PAYLOAD_CSUM_ERR	0x00000080
+#define TXDESC_ERROR_SUMMARY	0x00008000
+#define TXDESC_SA_CTRL_INSERT	0x00040000
+#define TXDESC_SA_CTRL_REPLACE	0x00080000
+#define TXDESC_2ND_ADDR_CHAINED	0x00100000
+#define TXDESC_END_RING		0x00200000
+#define TXDESC_CSUM_IP		0x00400000
+#define TXDESC_CSUM_IP_PAYLD	0x00800000
+#define TXDESC_CSUM_ALL		0x00C00000
+#define TXDESC_CRC_EN_REPLACE	0x01000000
+#define TXDESC_CRC_EN_APPEND	0x02000000
+#define TXDESC_DISABLE_PAD	0x04000000
+#define TXDESC_FIRST_SEG	0x10000000
+#define TXDESC_LAST_SEG		0x20000000
+#define TXDESC_INTERRUPT	0x40000000
+
+#define DESC_OWN		0x80000000
+#define DESC_BUFFER1_SZ_MASK	0x00001fff
+#define DESC_BUFFER2_SZ_MASK	0x1fff0000
+#define DESC_BUFFER2_SZ_OFFSET	16
+
+struct xgmac_dma_desc {
+	__le32 flags;
+	__le32 buf_size;
+	__le32 buf1_addr;		/* Buffer 1 Address Pointer */
+	__le32 buf2_addr;		/* Buffer 2 Address Pointer */
+	__le32 ext_status;
+	__le32 res[3];
+};
+
+struct xgmac_priv {
+	struct xgmac_dma_desc *rx_chain;
+	struct xgmac_dma_desc *tx_chain;
+	char *rxbuffer;
+
+	u32 tx_currdesc;
+	u32 rx_currdesc;
+
+	void __iomem *base;
+
+	struct eth_device edev;
+	struct device_d *dev;
+};
+
+/* XGMAC Descriptor Access Helpers */
+static inline void desc_set_buf_len(struct xgmac_dma_desc *p, u32 buf_sz)
+{
+	if (buf_sz > MAX_DESC_BUF_SZ)
+		p->buf_size = cpu_to_le32(MAX_DESC_BUF_SZ |
+			(buf_sz - MAX_DESC_BUF_SZ) << DESC_BUFFER2_SZ_OFFSET);
+	else
+		p->buf_size = cpu_to_le32(buf_sz);
+}
+
+static inline int desc_get_buf_len(struct xgmac_dma_desc *p)
+{
+	u32 len = le32_to_cpu(p->buf_size);
+	return (len & DESC_BUFFER1_SZ_MASK) +
+		((len & DESC_BUFFER2_SZ_MASK) >> DESC_BUFFER2_SZ_OFFSET);
+}
+
+static inline void desc_init_rx_desc(struct xgmac_dma_desc *p, int ring_size,
+				     int buf_sz)
+{
+	struct xgmac_dma_desc *end = p + ring_size - 1;
+
+	memset(p, 0, sizeof(*p) * ring_size);
+
+	for (; p <= end; p++)
+		desc_set_buf_len(p, buf_sz);
+
+	end->buf_size |= cpu_to_le32(RXDESC1_END_RING);
+}
+
+static inline void desc_init_tx_desc(struct xgmac_dma_desc *p, u32 ring_size)
+{
+	memset(p, 0, sizeof(*p) * ring_size);
+	p[ring_size - 1].flags = cpu_to_le32(TXDESC_END_RING);
+}
+
+static inline int desc_get_owner(struct xgmac_dma_desc *p)
+{
+	return le32_to_cpu(p->flags) & DESC_OWN;
+}
+
+static inline void desc_set_rx_owner(struct xgmac_dma_desc *p)
+{
+	/* Clear all fields and set the owner */
+	p->flags = cpu_to_le32(DESC_OWN);
+}
+
+static inline void desc_set_tx_owner(struct xgmac_dma_desc *p, u32 flags)
+{
+	u32 tmpflags = le32_to_cpu(p->flags);
+	tmpflags &= TXDESC_END_RING;
+	tmpflags |= flags | DESC_OWN;
+	p->flags = cpu_to_le32(tmpflags);
+}
+
+static inline void *desc_get_buf_addr(struct xgmac_dma_desc *p)
+{
+	return (void *)le32_to_cpu(p->buf1_addr);
+}
+
+static inline void desc_set_buf_addr(struct xgmac_dma_desc *p,
+				     void *paddr, int len)
+{
+	p->buf1_addr = cpu_to_le32(paddr);
+	if (len > MAX_DESC_BUF_SZ)
+		p->buf2_addr = cpu_to_le32(paddr + MAX_DESC_BUF_SZ);
+}
+
+static inline void desc_set_buf_addr_and_size(struct xgmac_dma_desc *p,
+					      void *paddr, int len)
+{
+	desc_set_buf_len(p, len);
+	desc_set_buf_addr(p, paddr, len);
+}
+
+static inline int desc_get_rx_frame_len(struct xgmac_dma_desc *p)
+{
+	u32 data = le32_to_cpu(p->flags);
+	u32 len = (data & RXDESC_FRAME_LEN_MASK) >> RXDESC_FRAME_LEN_OFFSET;
+	if (data & RXDESC_FRAME_TYPE)
+		len -= 4;
+
+	return len;
+}
+
+/*
+ * Initialize a descriptor ring.  Calxeda XGMAC is configured to use
+ * advanced descriptors.
+ */
+
+static void init_rx_desc(struct xgmac_priv *priv)
+{
+	struct xgmac_dma_desc *rxdesc = priv->rx_chain;
+	void *rxbuffer = priv->rxbuffer;
+	int i;
+
+	desc_init_rx_desc(rxdesc, RX_NUM_DESC, ETH_BUF_SZ);
+	writel((ulong)rxdesc, priv->base + XGMAC_DMA_RX_BASE_ADDR);
+
+	for (i = 0; i < RX_NUM_DESC; i++) {
+		desc_set_buf_addr(rxdesc + i, rxbuffer + (i * ETH_BUF_SZ),
+				  ETH_BUF_SZ);
+		desc_set_rx_owner(rxdesc + i);
+	}
+}
+
+static void init_tx_desc(struct xgmac_priv *priv)
+{
+	desc_init_tx_desc(priv->tx_chain, TX_NUM_DESC);
+	writel((ulong)priv->tx_chain, priv->base + XGMAC_DMA_TX_BASE_ADDR);
+}
+
+static int xgmac_reset(struct eth_device *dev)
+{
+	struct xgmac_priv *priv = dev->priv;
+	int ret;
+	u32 value;
+
+	value = readl(priv->base + XGMAC_CONTROL) & XGMAC_CONTROL_SPD_MASK;
+
+	writel(DMA_BUS_MODE_SFT_RESET, priv->base + XGMAC_DMA_BUS_MODE);
+
+	ret = wait_on_timeout(100 * MSECOND,
+		!(readl(priv->base + XGMAC_DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+	writel(value, priv->base + XGMAC_CONTROL);
+
+	return ret;
+}
+
+static int xgmac_open(struct eth_device *edev)
+{
+	struct xgmac_priv *priv = edev->priv;
+	int value;
+	int ret;
+
+	ret = xgmac_reset(edev);
+	if (ret)
+		return ret;
+
+	/* set the AXI bus modes */
+	value = DMA_BUS_MODE_ATDS |
+		(16 << DMA_BUS_MODE_PBL_SHIFT) |
+		DMA_BUS_MODE_FB | DMA_BUS_MODE_AAL;
+	writel(value, priv->base + XGMAC_DMA_BUS_MODE);
+
+	value = DMA_AXIMODE_AAL | DMA_AXIMODE_BLEN16 |
+		DMA_AXIMODE_BLEN8 | DMA_AXIMODE_BLEN4;
+	writel(value, priv->base + XGMAC_DMA_AXI_BUS);
+
+	/* set flow control parameters and store and forward mode */
+	value = (FIFO_MINUS_12K << XGMAC_OMR_RFD_SHIFT) |
+		(FIFO_MINUS_4K << XGMAC_OMR_RFA_SHIFT) |
+		XGMAC_OMR_EFC | XGMAC_OMR_TSF | XGMAC_OMR_RSF;
+	writel(value, priv->base + XGMAC_OMR);
+
+	/* enable pause frames */
+	value = (1024 << XGMAC_FLOW_CTRL_PT_SHIFT) |
+		(1 << XGMAC_FLOW_CTRL_PLT_SHIFT) |
+		XGMAC_FLOW_CTRL_UP | XGMAC_FLOW_CTRL_RFE | XGMAC_FLOW_CTRL_TFE;
+	writel(value, priv->base + XGMAC_FLOW_CTRL);
+
+	/* Initialize the descriptor chains */
+	init_rx_desc(priv);
+	init_tx_desc(priv);
+
+	/* must set to 0, or when started up will cause issues */
+	priv->tx_currdesc = 0;
+	priv->rx_currdesc = 0;
+
+	/* set default core values */
+	value = readl(priv->base + XGMAC_CONTROL);
+	value &= XGMAC_CONTROL_SPD_MASK;
+	value |= XGMAC_CONTROL_DDIC | XGMAC_CONTROL_ACS |
+		XGMAC_CONTROL_IPC | XGMAC_CONTROL_CAR;
+
+	/* Everything is ready enable both mac and DMA */
+	value |= XGMAC_CONTROL_RE | XGMAC_CONTROL_TE;
+	writel(value, priv->base + XGMAC_CONTROL);
+
+	value = readl(priv->base + XGMAC_DMA_CONTROL);
+	value |= DMA_CONTROL_SR | DMA_CONTROL_ST;
+	writel(value, priv->base + XGMAC_DMA_CONTROL);
+
+	return 0;
+}
+
+static int xgmac_send(struct eth_device *edev, void *packet, int length)
+{
+	struct xgmac_priv *priv = edev->priv;
+	u32 currdesc = priv->tx_currdesc;
+	struct xgmac_dma_desc *txdesc = &priv->tx_chain[currdesc];
+	int ret;
+
+	dma_flush_range((ulong) packet, (ulong)packet + length);
+	desc_set_buf_addr_and_size(txdesc, packet, length);
+	desc_set_tx_owner(txdesc, TXDESC_FIRST_SEG |
+		TXDESC_LAST_SEG | TXDESC_CRC_EN_APPEND);
+
+	/* write poll demand */
+	writel(1, priv->base + XGMAC_DMA_TX_POLL);
+
+	ret = wait_on_timeout(1 * SECOND, !desc_get_owner(txdesc));
+	if (ret) {
+		dev_err(priv->dev, "TX timeout\n");
+		return ret;
+	}
+
+	priv->tx_currdesc = (currdesc + 1) & (TX_NUM_DESC - 1);
+	return 0;
+}
+
+static int xgmac_recv(struct eth_device *edev)
+{
+	struct xgmac_priv *priv = edev->priv;
+	u32 currdesc = priv->rx_currdesc;
+	struct xgmac_dma_desc *rxdesc = &priv->rx_chain[currdesc];
+	int length = 0;
+
+	/* check if the host has the desc */
+	if (desc_get_owner(rxdesc))
+		return -1; /* something bad happened */
+
+	length = desc_get_rx_frame_len(rxdesc);
+
+	net_receive(desc_get_buf_addr(rxdesc), length);
+
+	/* set descriptor back to owned by XGMAC */
+	desc_set_rx_owner(rxdesc);
+	writel(1, priv->base + XGMAC_DMA_RX_POLL);
+
+	priv->rx_currdesc = (currdesc + 1) & (RX_NUM_DESC - 1);
+
+	return length;
+}
+
+static void xgmac_halt(struct eth_device *edev)
+{
+	struct xgmac_priv *priv = edev->priv;
+	int value;
+
+	/* Disable TX/RX */
+	value = readl(priv->base + XGMAC_CONTROL);
+	value &= ~(XGMAC_CONTROL_RE | XGMAC_CONTROL_TE);
+	writel(value, priv->base + XGMAC_CONTROL);
+
+	/* Disable DMA */
+	value = readl(priv->base + XGMAC_DMA_CONTROL);
+	value &= ~(DMA_CONTROL_SR | DMA_CONTROL_ST);
+	writel(value, priv->base + XGMAC_DMA_CONTROL);
+
+	/* must set to 0, or when started up will cause issues */
+	priv->tx_currdesc = 0;
+	priv->rx_currdesc = 0;
+}
+
+static int xgmac_get_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+	struct xgmac_priv *priv = edev->priv;
+	u32 hi_addr, lo_addr;
+
+	/* Read the MAC address from the hardware */
+	hi_addr = readl(priv->base + XGMAC_ADDR_HIGH(0));
+	lo_addr = readl(priv->base + XGMAC_ADDR_LOW(0));
+
+	/* Extract the MAC address from the high and low words */
+	addr[0] = lo_addr & 0xff;
+	addr[1] = (lo_addr >> 8) & 0xff;
+	addr[2] = (lo_addr >> 16) & 0xff;
+	addr[3] = (lo_addr >> 24) & 0xff;
+	addr[4] = hi_addr & 0xff;
+	addr[5] = (hi_addr >> 8) & 0xff;
+
+	return 0;
+}
+
+static int xgmac_set_ethaddr(struct eth_device *dev, unsigned char *addr)
+{
+	struct xgmac_priv *priv = dev->priv;
+	u32 data;
+
+	data = (addr[5] << 8) | addr[4];
+	writel(data, priv->base + XGMAC_ADDR_HIGH(0));
+	data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+	writel(data, priv->base + XGMAC_ADDR_LOW(0));
+
+	return 0;
+}
+
+static int hb_xgmac_probe(struct device_d *dev)
+{
+	struct eth_device *edev;
+	struct xgmac_priv *priv;
+	void __iomem *base;
+
+	base = dev_request_mem_region(dev, 0);
+
+	/* check hardware version */
+	if (readl(base + XGMAC_VERSION) != 0x1012)
+		return -EINVAL;
+
+	priv = xzalloc(sizeof(*priv));
+
+	priv->dev = dev;
+	priv->base = base;
+
+	priv->rxbuffer = dma_alloc_coherent(RX_BUF_SZ);
+	priv->rx_chain = dma_alloc_coherent(RX_NUM_DESC * sizeof(struct xgmac_dma_desc));
+	priv->tx_chain = dma_alloc_coherent(TX_NUM_DESC * sizeof(struct xgmac_dma_desc));
+
+	edev = &priv->edev;
+	edev->priv = priv;
+
+	edev->open = xgmac_open;
+	edev->send = xgmac_send;
+	edev->recv = xgmac_recv;
+	edev->halt = xgmac_halt;
+	edev->get_ethaddr = xgmac_get_ethaddr;
+	edev->set_ethaddr = xgmac_set_ethaddr;
+	edev->parent = dev;
+
+	eth_register(edev);
+
+	return 0;
+}
+
+static struct driver_d hb_xgmac_driver = {
+	.name  = "hb-xgmac",
+	.probe = hb_xgmac_probe,
+};
+
+static int hb_xgmac_driver_init(void)
+{
+	debug("%s\n", __func__);
+	return platform_driver_register(&hb_xgmac_driver);
+}
+device_initcall(hb_xgmac_driver_init);
-- 
1.7.10.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-02-11 17:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-11 17:10 [PATCH 0/3] arm: add Calxeda Highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 17:13 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-02-11 17:13   ` [PATCH 2/3] arm: add highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 17:13   ` [PATCH 3/3] highbank: add l2x0 support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 19:06 [PATCH 0/3 v2] arm: add Calxeda Highbank support Jean-Christophe PLAGNIOL-VILLARD
2013-02-11 19:08 ` [PATCH 1/3] highbank: add xgmac support Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1360602834-12373-1-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox