mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Fabio Porcedda <fabio.porcedda@gmail.com>
To: barebox@lists.infradead.org
Subject: [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci
Date: Tue, 19 Feb 2013 11:31:21 +0100	[thread overview]
Message-ID: <1361269881-23479-1-git-send-email-fabio.porcedda@gmail.com> (raw)

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
v2:
 - fix all the other boards using atmel_mci

 arch/arm/boards/at91sam9260ek/init.c    | 2 ++
 arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
 arch/arm/boards/at91sam9m10ihd/init.c   | 1 +
 arch/arm/boards/dss11/init.c            | 2 ++
 arch/arm/boards/pm9g45/init.c           | 2 +-
 arch/arm/boards/qil-a9260/init.c        | 2 ++
 arch/arm/boards/usb-a926x/init.c        | 2 ++
 7 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 2d52f5a..144f979 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -168,6 +168,8 @@ static void at91sam9260ek_phy_reset(void)
 static struct atmel_mci_platform_data __initdata ek_mci_data = {
 	.bus_width	= 4,
 	.slot_b		= 1,
+	.detect_pin	= -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static void ek_usb_add_device_mci(void)
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 5b5e31b..0ae7171 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -114,6 +114,7 @@ static struct at91_ether_platform_data macb_pdata = {
 static struct atmel_mci_platform_data ek_mci_data = {
 	.bus_width	= 4,
 	.detect_pin	= AT91_PIN_PD10,
+	.wp_pin		= -EINVAL,
 };
 
 static void ek_add_device_mci(void)
diff --git a/arch/arm/boards/at91sam9m10ihd/init.c b/arch/arm/boards/at91sam9m10ihd/init.c
index f258caf..df63a91 100644
--- a/arch/arm/boards/at91sam9m10ihd/init.c
+++ b/arch/arm/boards/at91sam9m10ihd/init.c
@@ -96,6 +96,7 @@ static void ek_add_device_eth(void)
 static struct atmel_mci_platform_data ek_mci0_data = {
 	.bus_width	= 4,
 	.detect_pin	= AT91_PIN_PC25,
+	.wp_pin         = -EINVAL,
 };
 
 static void ek_add_device_mci(void)
diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
index 2920d5e..77ae46f 100644
--- a/arch/arm/boards/dss11/init.c
+++ b/arch/arm/boards/dss11/init.c
@@ -113,6 +113,8 @@ static void dss11_phy_reset(void)
 static struct atmel_mci_platform_data dss11_mci_data = {
 	.slot_b		= 1,
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static struct at91_usbh_data dss11_usbh_data = {
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 720099b..69c66d5 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -83,8 +83,8 @@ static void pm_add_device_nand(void)
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata mci_data = {
 	.bus_width	= 4,
-	.wp_pin		= 0,
 	.detect_pin	= AT91_PIN_PD6,
+	.wp_pin		= -EINVAL,
 };
 
 static void pm9g45_add_device_mci(void)
diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
index 2e131fe..e96204a 100644
--- a/arch/arm/boards/qil-a9260/init.c
+++ b/arch/arm/boards/qil-a9260/init.c
@@ -66,6 +66,8 @@ static void qil_a9260_add_device_nand(void)
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata qil_a9260_mci_data = {
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin         = -EINVAL,
 };
 
 static void qil_a9260_add_device_mci(void)
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index 2e3bbfa..7ae9020 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -213,6 +213,8 @@ static void usb_a9260_add_spi(void) {}
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata usb_a9260_mci_data = {
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static void usb_a9260_add_device_mci(void)
-- 
1.8.1.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-02-19 10:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-19 10:31 Fabio Porcedda [this message]
2013-02-19 19:07 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361269881-23479-1-git-send-email-fabio.porcedda@gmail.com \
    --to=fabio.porcedda@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox