mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci
@ 2013-02-19 10:31 Fabio Porcedda
  2013-02-19 19:07 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Fabio Porcedda @ 2013-02-19 10:31 UTC (permalink / raw)
  To: barebox

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
v2:
 - fix all the other boards using atmel_mci

 arch/arm/boards/at91sam9260ek/init.c    | 2 ++
 arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
 arch/arm/boards/at91sam9m10ihd/init.c   | 1 +
 arch/arm/boards/dss11/init.c            | 2 ++
 arch/arm/boards/pm9g45/init.c           | 2 +-
 arch/arm/boards/qil-a9260/init.c        | 2 ++
 arch/arm/boards/usb-a926x/init.c        | 2 ++
 7 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
index 2d52f5a..144f979 100644
--- a/arch/arm/boards/at91sam9260ek/init.c
+++ b/arch/arm/boards/at91sam9260ek/init.c
@@ -168,6 +168,8 @@ static void at91sam9260ek_phy_reset(void)
 static struct atmel_mci_platform_data __initdata ek_mci_data = {
 	.bus_width	= 4,
 	.slot_b		= 1,
+	.detect_pin	= -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static void ek_usb_add_device_mci(void)
diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
index 5b5e31b..0ae7171 100644
--- a/arch/arm/boards/at91sam9m10g45ek/init.c
+++ b/arch/arm/boards/at91sam9m10g45ek/init.c
@@ -114,6 +114,7 @@ static struct at91_ether_platform_data macb_pdata = {
 static struct atmel_mci_platform_data ek_mci_data = {
 	.bus_width	= 4,
 	.detect_pin	= AT91_PIN_PD10,
+	.wp_pin		= -EINVAL,
 };
 
 static void ek_add_device_mci(void)
diff --git a/arch/arm/boards/at91sam9m10ihd/init.c b/arch/arm/boards/at91sam9m10ihd/init.c
index f258caf..df63a91 100644
--- a/arch/arm/boards/at91sam9m10ihd/init.c
+++ b/arch/arm/boards/at91sam9m10ihd/init.c
@@ -96,6 +96,7 @@ static void ek_add_device_eth(void)
 static struct atmel_mci_platform_data ek_mci0_data = {
 	.bus_width	= 4,
 	.detect_pin	= AT91_PIN_PC25,
+	.wp_pin         = -EINVAL,
 };
 
 static void ek_add_device_mci(void)
diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
index 2920d5e..77ae46f 100644
--- a/arch/arm/boards/dss11/init.c
+++ b/arch/arm/boards/dss11/init.c
@@ -113,6 +113,8 @@ static void dss11_phy_reset(void)
 static struct atmel_mci_platform_data dss11_mci_data = {
 	.slot_b		= 1,
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static struct at91_usbh_data dss11_usbh_data = {
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 720099b..69c66d5 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -83,8 +83,8 @@ static void pm_add_device_nand(void)
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata mci_data = {
 	.bus_width	= 4,
-	.wp_pin		= 0,
 	.detect_pin	= AT91_PIN_PD6,
+	.wp_pin		= -EINVAL,
 };
 
 static void pm9g45_add_device_mci(void)
diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
index 2e131fe..e96204a 100644
--- a/arch/arm/boards/qil-a9260/init.c
+++ b/arch/arm/boards/qil-a9260/init.c
@@ -66,6 +66,8 @@ static void qil_a9260_add_device_nand(void)
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata qil_a9260_mci_data = {
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin         = -EINVAL,
 };
 
 static void qil_a9260_add_device_mci(void)
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index 2e3bbfa..7ae9020 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -213,6 +213,8 @@ static void usb_a9260_add_spi(void) {}
 #if defined(CONFIG_MCI_ATMEL)
 static struct atmel_mci_platform_data __initdata usb_a9260_mci_data = {
 	.bus_width	= 4,
+	.detect_pin     = -EINVAL,
+	.wp_pin		= -EINVAL,
 };
 
 static void usb_a9260_add_device_mci(void)
-- 
1.8.1.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci
  2013-02-19 10:31 [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci Fabio Porcedda
@ 2013-02-19 19:07 ` Sascha Hauer
  0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2013-02-19 19:07 UTC (permalink / raw)
  To: Fabio Porcedda; +Cc: barebox

On Tue, Feb 19, 2013 at 11:31:21AM +0100, Fabio Porcedda wrote:
> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> v2:
>  - fix all the other boards using atmel_mci

Applied, thanks

Sascha

> 
>  arch/arm/boards/at91sam9260ek/init.c    | 2 ++
>  arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
>  arch/arm/boards/at91sam9m10ihd/init.c   | 1 +
>  arch/arm/boards/dss11/init.c            | 2 ++
>  arch/arm/boards/pm9g45/init.c           | 2 +-
>  arch/arm/boards/qil-a9260/init.c        | 2 ++
>  arch/arm/boards/usb-a926x/init.c        | 2 ++
>  7 files changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c
> index 2d52f5a..144f979 100644
> --- a/arch/arm/boards/at91sam9260ek/init.c
> +++ b/arch/arm/boards/at91sam9260ek/init.c
> @@ -168,6 +168,8 @@ static void at91sam9260ek_phy_reset(void)
>  static struct atmel_mci_platform_data __initdata ek_mci_data = {
>  	.bus_width	= 4,
>  	.slot_b		= 1,
> +	.detect_pin	= -EINVAL,
> +	.wp_pin		= -EINVAL,
>  };
>  
>  static void ek_usb_add_device_mci(void)
> diff --git a/arch/arm/boards/at91sam9m10g45ek/init.c b/arch/arm/boards/at91sam9m10g45ek/init.c
> index 5b5e31b..0ae7171 100644
> --- a/arch/arm/boards/at91sam9m10g45ek/init.c
> +++ b/arch/arm/boards/at91sam9m10g45ek/init.c
> @@ -114,6 +114,7 @@ static struct at91_ether_platform_data macb_pdata = {
>  static struct atmel_mci_platform_data ek_mci_data = {
>  	.bus_width	= 4,
>  	.detect_pin	= AT91_PIN_PD10,
> +	.wp_pin		= -EINVAL,
>  };
>  
>  static void ek_add_device_mci(void)
> diff --git a/arch/arm/boards/at91sam9m10ihd/init.c b/arch/arm/boards/at91sam9m10ihd/init.c
> index f258caf..df63a91 100644
> --- a/arch/arm/boards/at91sam9m10ihd/init.c
> +++ b/arch/arm/boards/at91sam9m10ihd/init.c
> @@ -96,6 +96,7 @@ static void ek_add_device_eth(void)
>  static struct atmel_mci_platform_data ek_mci0_data = {
>  	.bus_width	= 4,
>  	.detect_pin	= AT91_PIN_PC25,
> +	.wp_pin         = -EINVAL,
>  };
>  
>  static void ek_add_device_mci(void)
> diff --git a/arch/arm/boards/dss11/init.c b/arch/arm/boards/dss11/init.c
> index 2920d5e..77ae46f 100644
> --- a/arch/arm/boards/dss11/init.c
> +++ b/arch/arm/boards/dss11/init.c
> @@ -113,6 +113,8 @@ static void dss11_phy_reset(void)
>  static struct atmel_mci_platform_data dss11_mci_data = {
>  	.slot_b		= 1,
>  	.bus_width	= 4,
> +	.detect_pin     = -EINVAL,
> +	.wp_pin		= -EINVAL,
>  };
>  
>  static struct at91_usbh_data dss11_usbh_data = {
> diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
> index 720099b..69c66d5 100644
> --- a/arch/arm/boards/pm9g45/init.c
> +++ b/arch/arm/boards/pm9g45/init.c
> @@ -83,8 +83,8 @@ static void pm_add_device_nand(void)
>  #if defined(CONFIG_MCI_ATMEL)
>  static struct atmel_mci_platform_data __initdata mci_data = {
>  	.bus_width	= 4,
> -	.wp_pin		= 0,
>  	.detect_pin	= AT91_PIN_PD6,
> +	.wp_pin		= -EINVAL,
>  };
>  
>  static void pm9g45_add_device_mci(void)
> diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
> index 2e131fe..e96204a 100644
> --- a/arch/arm/boards/qil-a9260/init.c
> +++ b/arch/arm/boards/qil-a9260/init.c
> @@ -66,6 +66,8 @@ static void qil_a9260_add_device_nand(void)
>  #if defined(CONFIG_MCI_ATMEL)
>  static struct atmel_mci_platform_data __initdata qil_a9260_mci_data = {
>  	.bus_width	= 4,
> +	.detect_pin     = -EINVAL,
> +	.wp_pin         = -EINVAL,
>  };
>  
>  static void qil_a9260_add_device_mci(void)
> diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
> index 2e3bbfa..7ae9020 100644
> --- a/arch/arm/boards/usb-a926x/init.c
> +++ b/arch/arm/boards/usb-a926x/init.c
> @@ -213,6 +213,8 @@ static void usb_a9260_add_spi(void) {}
>  #if defined(CONFIG_MCI_ATMEL)
>  static struct atmel_mci_platform_data __initdata usb_a9260_mci_data = {
>  	.bus_width	= 4,
> +	.detect_pin     = -EINVAL,
> +	.wp_pin		= -EINVAL,
>  };
>  
>  static void usb_a9260_add_device_mci(void)
> -- 
> 1.8.1.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-19 19:07 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-19 10:31 [For master PATCH v2] ARM: at91: use -EINVAL for invalid gpio on atmel_mci Fabio Porcedda
2013-02-19 19:07 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox