* [PATCH 1/2] ARM i.MX pcm043: Switch to new environment
@ 2013-02-26 10:01 Sascha Hauer
2013-02-26 10:01 ` [PATCH 2/2] ARM i.MX pcm043: Use imx_bootsource() to detect bootsource Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Sascha Hauer @ 2013-02-26 10:01 UTC (permalink / raw)
To: barebox
- switch to new environment
- make barebox partitions 512K big
- update defconfig for new env:
- enable menu support
- miitool support
- clk commands
- oftree support
- let/dirname/readlink commands
- enable external nand boot support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm043/env/boot/nand-ubi | 10 +++++
arch/arm/boards/pcm043/env/config | 53 -------------------------
arch/arm/boards/pcm043/env/init/config-board | 7 ++++
arch/arm/boards/pcm043/env/init/mtdparts-nand | 11 +++++
arch/arm/boards/pcm043/env/init/mtdparts-nor | 11 +++++
arch/arm/boards/pcm043/pcm043.c | 8 ++--
arch/arm/configs/pcm043_defconfig | 34 ++++++++++++----
arch/arm/mach-imx/Kconfig | 1 +
8 files changed, 71 insertions(+), 64 deletions(-)
create mode 100644 arch/arm/boards/pcm043/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/pcm043/env/config
create mode 100644 arch/arm/boards/pcm043/env/init/config-board
create mode 100644 arch/arm/boards/pcm043/env/init/mtdparts-nand
create mode 100644 arch/arm/boards/pcm043/env/init/mtdparts-nor
diff --git a/arch/arm/boards/pcm043/env/boot/nand-ubi b/arch/arm/boards/pcm043/env/boot/nand-ubi
new file mode 100644
index 0000000..67b0cb4
--- /dev/null
+++ b/arch/arm/boards/pcm043/env/boot/nand-ubi
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "nand (UBI)"
+ exit
+fi
+
+global.bootm.image="/dev/nand0.kernel.bb"
+#global.bootm.oftree="/env/oftree"
+global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rootfstype=ubifs"
diff --git a/arch/arm/boards/pcm043/env/config b/arch/arm/boards/pcm043/env/config
deleted file mode 100644
index 4913053..0000000
--- a/arch/arm/boards/pcm043/env/config
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-global.hostname=pcm043
-eth0.serverip=
-user=
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=dhcp
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=tftp
-# can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
-
-# can be either 'jffs2' or 'ubifs'
-rootfs_type=ubifs
-rootfsimage=root-${global.hostname}.$rootfs_type
-
-kernelimage=zImage-${global.hostname}
-#kernelimage=uImage-${global.hostname}
-#kernelimage=Image-${global.hostname}
-#kernelimage=Image-${global.hostname}.lzo
-
-if [ -n $user ]; then
- kernelimage="$user"-"$kernelimage"
- nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
- rootfsimage="$user"-"$rootfsimage"
-else
- nfsroot="$eth0.serverip:/path/to/nfs/root"
-fi
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-bootargs="$bootargs video=mx3fb:CTP-CLAA070LC0ACW"
-
-nor_parts="256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)"
-rootfs_mtdblock_nor=3
-
-nand_parts="256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)"
-rootfs_mtdblock_nand=7
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
-
diff --git a/arch/arm/boards/pcm043/env/init/config-board b/arch/arm/boards/pcm043/env/init/config-board
new file mode 100644
index 0000000..545fdff
--- /dev/null
+++ b/arch/arm/boards/pcm043/env/init/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=pcm043
+global.linux.bootargs.base="console=ttymxc0,115200"
diff --git a/arch/arm/boards/pcm043/env/init/mtdparts-nand b/arch/arm/boards/pcm043/env/init/mtdparts-nand
new file mode 100644
index 0000000..8a41f62
--- /dev/null
+++ b/arch/arm/boards/pcm043/env/init/mtdparts-nand
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NAND partitions"
+ exit
+fi
+
+mtdparts="512k(nand0.barebox),256k(nand0.bareboxenv),4M(nand0.kernel),-(nand0.root)"
+kernelname="mxc_nand"
+
+mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/pcm043/env/init/mtdparts-nor b/arch/arm/boards/pcm043/env/init/mtdparts-nor
new file mode 100644
index 0000000..f787f28
--- /dev/null
+++ b/arch/arm/boards/pcm043/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NOR partitions"
+ exit
+fi
+
+mtdparts="512k(nor0.barebox),128k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/pcm043/pcm043.c b/arch/arm/boards/pcm043/pcm043.c
index 95da8f0..563a98a 100644
--- a/arch/arm/boards/pcm043/pcm043.c
+++ b/arch/arm/boards/pcm043/pcm043.c
@@ -140,15 +140,15 @@ static int imx35_devices_init(void)
if ((reg & 0xc00) == 0x800) { /* reset mode: external boot */
switch ( (reg >> 25) & 0x3) {
case 0x01: /* NAND is the source */
- devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
+ devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
+ devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
break;
case 0x00: /* NOR is the source */
- devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
- devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0"); /* environment */
+ devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
+ devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
protect_file("/dev/env0", 1);
break;
}
diff --git a/arch/arm/configs/pcm043_defconfig b/arch/arm/configs/pcm043_defconfig
index 7c62193..5447777 100644
--- a/arch/arm/configs/pcm043_defconfig
+++ b/arch/arm/configs/pcm043_defconfig
@@ -1,9 +1,9 @@
CONFIG_ARCH_IMX=y
CONFIG_CACHE_L2X0=y
CONFIG_ARCH_IMX_EXTERNAL_BOOT=y
+CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND=y
CONFIG_ARCH_IMX35=y
CONFIG_MACH_PCM043=y
-CONFIG_IMX_CLKO=y
CONFIG_IMX_IIM=y
CONFIG_IMX_IIM_FUSE_BLOW=y
CONFIG_AEABI=y
@@ -15,24 +15,37 @@ CONFIG_MALLOC_SIZE=0x1000000
CONFIG_MALLOC_TLSF=y
CONFIG_KALLSYMS=y
CONFIG_LONGHELP=y
-CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pcm043/env"
+CONFIG_RESET_SOURCE=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MSLEEP=y
CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_FILETYPE=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_IOMEM=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD5SUM=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTM_VERBOSE=y
@@ -40,22 +53,26 @@ CONFIG_CMD_BOOTM_INITRD=y
CONFIG_CMD_BOOTM_OFTREE=y
CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTZ is not set
# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OFTREE_PROBE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_WD=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
CONFIG_NET_NETCONSOLE=y
CONFIG_DRIVER_NET_FEC_IMX=y
# CONFIG_SPI is not set
@@ -65,5 +82,8 @@ CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_IMX=y
CONFIG_UBI=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_IMX=y
+CONFIG_FS_TFTP=y
CONFIG_ZLIB=y
CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4115d35..2678ab9 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -362,6 +362,7 @@ config MACH_FREESCALE_MX35_3STACK
config MACH_PCM043
bool "phyCORE-i.MX35"
select ARCH_HAS_L2X0
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
help
Say Y here if you are using Phytec's phyCORE-i.MX35 (pcm043) equipped
with a Freescale i.MX35 Processor
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread* [PATCH 2/2] ARM i.MX pcm043: Use imx_bootsource() to detect bootsource
2013-02-26 10:01 [PATCH 1/2] ARM i.MX pcm043: Switch to new environment Sascha Hauer
@ 2013-02-26 10:01 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2013-02-26 10:01 UTC (permalink / raw)
To: barebox
Also, print out where our environment comes from.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/pcm043/pcm043.c | 33 ++++++++++++++++++---------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boards/pcm043/pcm043.c b/arch/arm/boards/pcm043/pcm043.c
index 563a98a..04418fb 100644
--- a/arch/arm/boards/pcm043/pcm043.c
+++ b/arch/arm/boards/pcm043/pcm043.c
@@ -43,6 +43,7 @@
#include <mach/imx-pll.h>
#include <mach/iomux-mx35.h>
#include <mach/devices-imx35.h>
+#include <mach/generic.h>
static struct fec_platform_data fec_info = {
.xcv_type = MII100,
@@ -113,6 +114,7 @@ struct gpio_led led0 = {
static int imx35_devices_init(void)
{
uint32_t reg;
+ char *envstr;
/* CS0: Nor Flash */
imx35_setup_weimcs(5, 0x22C0CF00, 0x75000D01, 0x00000900);
@@ -137,23 +139,24 @@ static int imx35_devices_init(void)
*/
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
- if ((reg & 0xc00) == 0x800) { /* reset mode: external boot */
- switch ( (reg >> 25) & 0x3) {
- case 0x01: /* NAND is the source */
- devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
- devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
- dev_add_bb_dev("env_raw", "env0");
- break;
-
- case 0x00: /* NOR is the source */
- devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
- devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
- protect_file("/dev/env0", 1);
- break;
- }
+ switch (imx_bootsource()) {
+ case bootsource_nand:
+ devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+ envstr = "NAND";
+ break;
+ case bootsource_nor:
+ default:
+ devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
+ devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
+ protect_file("/dev/env0", 1);
+ envstr = "NOR";
+ break;
}
+ pr_info("using environment from %s flash\n", envstr);
imx35_add_fb(&ipu_fb_data);
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-02-26 10:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-26 10:01 [PATCH 1/2] ARM i.MX pcm043: Switch to new environment Sascha Hauer
2013-02-26 10:01 ` [PATCH 2/2] ARM i.MX pcm043: Use imx_bootsource() to detect bootsource Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox