From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard
Date: Mon, 11 Mar 2013 10:15:01 +0100 [thread overview]
Message-ID: <1362993306-19262-5-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1362993306-19262-1-git-send-email-s.trumtrar@pengutronix.de>
The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
There is also a Digilent ZedBoard, that is the same but only for
academic customers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/boards/avnet-zedboard/Makefile | 1 +
arch/arm/boards/avnet-zedboard/board.c | 38 +++
arch/arm/boards/avnet-zedboard/config.h | 4 +
.../boards/avnet-zedboard/env/init/config-board | 7 +
| 56 ++++
arch/arm/boards/avnet-zedboard/lowlevel.c | 249 ++++++++++++++
arch/arm/configs/zedboard_defconfig | 356 +++++++++++++++++++++
arch/arm/mach-zynq/Kconfig | 1 +
arch/arm/mach-zynq/include/mach/zynq7000-regs.h | 2 +-
arch/arm/mach-zynq/zynq.c | 5 -
10 files changed, 713 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
create mode 100644 arch/arm/boards/avnet-zedboard/board.c
create mode 100644 arch/arm/boards/avnet-zedboard/config.h
create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
create mode 100644 arch/arm/configs/zedboard_defconfig
diff --git a/arch/arm/boards/avnet-zedboard/Makefile b/arch/arm/boards/avnet-zedboard/Makefile
new file mode 100644
index 0000000..5c05544
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/Makefile
@@ -0,0 +1 @@
+obj-y += board.o lowlevel.o flash_header.o
diff --git a/arch/arm/boards/avnet-zedboard/board.c b/arch/arm/boards/avnet-zedboard/board.c
new file mode 100644
index 0000000..88e2484
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/board.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/armlinux.h>
+#include <common.h>
+#include <environment.h>
+#include <generated/mach-types.h>
+#include <init.h>
+#include <mach/devices.h>
+#include <mach/zynq7000-regs.h>
+#include <sizes.h>
+
+static int zedboard_mem_init(void)
+{
+ arm_add_mem_device("ram0", SZ_1M, SZ_512M);
+
+ return 0;
+}
+mem_initcall(zedboard_mem_init);
+
+static int zedboard_console_init(void)
+{
+ zynq_add_uart1();
+
+ return 0;
+}
+console_initcall(zedboard_console_init);
diff --git a/arch/arm/boards/avnet-zedboard/config.h b/arch/arm/boards/avnet-zedboard/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/avnet-zedboard/env/init/config-board b/arch/arm/boards/avnet-zedboard/env/init/config-board
new file mode 100644
index 0000000..9957653
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/env/init/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.hostname=ZedBoard
+global.linux.bootargs.base="console=ttyPS1,115200"
--git a/arch/arm/boards/avnet-zedboard/flash_header.c b/arch/arm/boards/avnet-zedboard/flash_header.c
new file mode 100644
index 0000000..e2bfaa0
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/flash_header.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/zynq-flash-header.h>
+#include <mach/zynq7000-regs.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked __flash_header_start go(void)
+{
+ __asm__ __volatile__ (
+ "b barebox_arm_reset_vector\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ "1: b 1b\n"
+ );
+}
+
+#define REG(a, v) { .addr = cpu_to_le32(a), .val = cpu_to_le32(v), }
+
+struct zynq_reg_entry __ps7reg_entry_section reg_entry[] = {
+ /* stop */
+ REG(0xFFFFFFFF, 0x00000000),
+};
+
+struct zynq_flash_header __flash_header_section flash_header = {
+ .width_det = WIDTH_DETECTION_MAGIC,
+ .image_id = IMAGE_IDENTIFICATION,
+ .enc_stat = 0x0,
+ .user = 0x0,
+ .flash_offset = 0x8c0,
+ .length = barebox_image_size,
+ .res0 = 0x0,
+ .start_of_exec = 0x0,
+ .total_len = barebox_image_size,
+ .res1 = 0x1,
+ .checksum = 0x0,
+ .res2 = 0x0,
+};
diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
new file mode 100644
index 0000000..7f4ceeb
--- /dev/null
+++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
@@ -0,0 +1,249 @@
+/*
+ *
+ * (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/zynq7000-regs.h>
+
+#define DCI_DONE (1 << 13)
+#define PLL_ARM_LOCK (1 << 0)
+#define PLL_DDR_LOCK (1 << 1)
+#define PLL_IO_LOCK (1 << 2)
+
+void __naked barebox_arm_reset_vector(void)
+{
+ /* open sesame */
+ writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
+
+ /* turn on LD9 */
+ writel(0x00000200, 0xF800071C);
+ writel(0x00000080, 0xE000A204);
+ writel(0x00000080, 0xE000A000);
+
+ /* ps7_clock_init_data */
+ writel(0x00F00701, ZYNQ_DCI_CLK_CTRL);
+ writel(0x00002803, ZYNQ_UART_CLK_CTRL);
+ writel(0x00000A03, ZYNQ_DBG_CLK_CTRL);
+ writel(0x00000501, ZYNQ_PCAP_CLK_CTRL);
+ writel(0x00000000, ZYNQ_TOPSW_CLK_CTRL);
+ writel(0x00100A00, ZYNQ_FPGA0_CLK_CTRL);
+ writel(0x00100700, ZYNQ_FPGA1_CLK_CTRL);
+ writel(0x00101400, ZYNQ_FPGA2_CLK_CTRL);
+ writel(0x00101400, ZYNQ_FPGA3_CLK_CTRL);
+ /* 6:2:1 mode */
+ writel(0x00000001, ZYNQ_CLK_621_TRUE);
+ writel(0x01FC044D, ZYNQ_APER_CLK_CTRL);
+
+ /* configure the PLLs */
+ /* ARM PLL */
+ writel(0x00028008, ZYNQ_ARM_PLL_CTRL);
+ writel(0x000FA220, ZYNQ_ARM_PLL_CFG);
+ writel(0x00028010, ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028011, ZYNQ_ARM_PLL_CTRL);
+ writel(0x00028010, ZYNQ_ARM_PLL_CTRL);
+
+ while (!(readl(ZYNQ_PLL_STATUS) & PLL_ARM_LOCK))
+ ;
+ writel(0x00028000, ZYNQ_ARM_PLL_CTRL);
+
+ /* DDR PLL */
+ /* set to bypass mode */
+ writel(0x0001A018, ZYNQ_DDR_PLL_CTRL);
+ /* assert reset */
+ writel(0x0001A019, ZYNQ_DDR_PLL_CTRL);
+ /* set feedback divs */
+ writel(0x00020019, ZYNQ_DDR_PLL_CTRL);
+ writel(0x0012C220, ZYNQ_DDR_PLL_CFG);
+ /* set ddr2xclk and ddr3xclk: 3,2 */
+ writel(0x0C200003, ZYNQ_DDR_CLK_CTRL);
+ /* deassert reset */
+ writel(0x00020018, ZYNQ_DDR_PLL_CTRL);
+ /* wait pll lock */
+ while (!(readl(ZYNQ_PLL_STATUS) & PLL_DDR_LOCK))
+ ;
+ /* remove bypass mode */
+ writel(0x00020008, ZYNQ_DDR_PLL_CTRL);
+
+ /* IO PLL */
+ writel(0x0001E008, ZYNQ_IO_PLL_CTRL);
+ writel(0x001452C0, ZYNQ_IO_PLL_CFG);
+ writel(0x0001E010, ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E011, ZYNQ_IO_PLL_CTRL);
+ writel(0x0001E010, ZYNQ_IO_PLL_CTRL);
+
+ while (!(readl(ZYNQ_PLL_STATUS) & PLL_IO_LOCK))
+ ;
+ writel(0x0001E000, ZYNQ_IO_PLL_CTRL);
+
+ /*
+ * INP_TYPE[1:2] = {off, vref, diff, lvcmos}
+ * DCI_UPDATE[3], TERM_EN[4]
+ * DCI_TYPE[5:6] = {off, drive, res, term}
+ * IBUF_DISABLE_MODE[7] = {ibuf, ibuf_disable}
+ * TERM_DISABLE_MODE[8] = {always, dynamic}
+ * OUTPUT_EN[9:10] = {ibuf, res, res, obuf}
+ * PULLUP_EN[11]
+ */
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR0);
+ writel(0x00000600, ZYNQ_DDRIOB_ADDR1);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA0);
+ writel(0x00000672, ZYNQ_DDRIOB_DATA1);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF0);
+ writel(0x00000674, ZYNQ_DDRIOB_DIFF1);
+ writel(0x00000600, ZYNQ_DDRIOB_CLOCK);
+ /*
+ * Drive_P[0:6], Drive_N[7:13]
+ * Slew_P[14:18], Slew_N[19:23]
+ * GTL[24:26], RTerm[27:31]
+ */
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_ADDR);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DATA);
+ writel(0x00F9861C, ZYNQ_DDRIOB_DRIVE_SLEW_DIFF);
+ writel(0x00D6861C, ZYNQ_DDRIOB_DRIVE_SLEW_CLOCK);
+ /*
+ * VREF_INT_EN[0]
+ * VREF_SEL[1:4] = {0001=0.6V, 0100=0.75V, 1000=0.9V}
+ * VREF_EXT_EN[5:6] = {dis/dis, dis/en, en/dis, en/en}
+ * RES[7:8], REFIO_EN[9]
+ */
+ /* FIXME: Xilinx sets this to internal, but Zedboard should support
+ external VRef, too */
+ writel(0x00000E09, ZYNQ_DDRIOB_DDR_CTRL);
+ /*
+ * RESET[0], ENABLE[1]
+ * NREF_OPT1[6:7], NREF_OPT2[8:10], NREF_OPT4[11:13]
+ * PREF_OPT1[14:15], PREF_OPT2[17:19], UPDATE_CONTROL[20]
+ */
+ writel(0x00000021, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00000020, ZYNQ_DDRIOB_DCI_CTRL);
+ writel(0x00100823, ZYNQ_DDRIOB_DCI_CTRL);
+
+ while (!(readl(ZYNQ_DDRIOB_DCI_STATUS) & DCI_DONE))
+ ;
+
+ writel(0x0E00E07F, 0xF8007000);
+
+ /* ps7_ddr_init_data */
+ writel(0x00000080, 0XF8006000);
+ writel(0x00081081, 0XF8006004);
+ writel(0x03C0780F, 0XF8006008);
+ writel(0x02001001, 0XF800600C);
+ writel(0x00014001, 0XF8006010);
+ writel(0x0004159B, 0XF8006014);
+ writel(0x452460D2, 0XF8006018);
+ writel(0x720238E5, 0XF800601C);
+ writel(0x272872D0, 0XF8006020);
+ writel(0x0000003C, 0XF8006024);
+ writel(0x00002007, 0XF8006028);
+ writel(0x00000008, 0XF800602C);
+ writel(0x00040930, 0XF8006030);
+ writel(0x00010694, 0XF8006034);
+ writel(0x00000000, 0XF8006038);
+ writel(0x00000777, 0XF800603C);
+ writel(0xFFF00000, 0XF8006040);
+ writel(0x0FF66666, 0XF8006044);
+ writel(0x0003C248, 0XF8006048);
+ writel(0x77010800, 0XF8006050);
+ writel(0x00000101, 0XF8006058);
+ writel(0x00005003, 0XF800605C);
+ writel(0x0000003E, 0XF8006060);
+ writel(0x00020000, 0XF8006064);
+ writel(0x00284141, 0XF8006068);
+ writel(0x00001610, 0XF800606C);
+ writel(0x00008000, 0XF80060A0);
+ writel(0x10200802, 0XF80060A4);
+ writel(0x0690CB73, 0XF80060A8);
+ writel(0x000001FE, 0XF80060AC);
+ writel(0x1CFFFFFF, 0XF80060B0);
+ writel(0x00000200, 0XF80060B4);
+ writel(0x00200066, 0XF80060B8);
+ writel(0x00000000, 0XF80060BC);
+ writel(0x00000000, 0XF80060C4);
+ writel(0x00000000, 0XF80060C8);
+ writel(0x00000000, 0XF80060DC);
+ writel(0x00000000, 0XF80060F0);
+ writel(0x00000008, 0XF80060F4);
+ writel(0x00000000, 0XF8006114);
+ writel(0x40000001, 0XF8006118);
+ writel(0x40000001, 0XF800611C);
+ writel(0x40000001, 0XF8006120);
+ writel(0x40000001, 0XF8006124);
+ writel(0x00033C03, 0XF800612C);
+ writel(0x00034003, 0XF8006130);
+ writel(0x0002F400, 0XF8006134);
+ writel(0x00030400, 0XF8006138);
+ writel(0x00000035, 0XF8006140);
+ writel(0x00000035, 0XF8006144);
+ writel(0x00000035, 0XF8006148);
+ writel(0x00000035, 0XF800614C);
+ writel(0x00000083, 0XF8006154);
+ writel(0x00000083, 0XF8006158);
+ writel(0x0000007F, 0XF800615C);
+ writel(0x00000078, 0XF8006160);
+ writel(0x00000124, 0XF8006168);
+ writel(0x00000125, 0XF800616C);
+ writel(0x00000112, 0XF8006170);
+ writel(0x00000116, 0XF8006174);
+ writel(0x000000C3, 0XF800617C);
+ writel(0x000000C3, 0XF8006180);
+ writel(0x000000BF, 0XF8006184);
+ writel(0x000000B8, 0XF8006188);
+ writel(0x10040080, 0XF8006190);
+ writel(0x0001FC82, 0XF8006194);
+ writel(0x00000000, 0XF8006204);
+ writel(0x000803FF, 0XF8006208);
+ writel(0x000803FF, 0XF800620C);
+ writel(0x000803FF, 0XF8006210);
+ writel(0x000803FF, 0XF8006214);
+ writel(0x000003FF, 0XF8006218);
+ writel(0x000003FF, 0XF800621C);
+ writel(0x000003FF, 0XF8006220);
+ writel(0x000003FF, 0XF8006224);
+ writel(0x00000000, 0XF80062A8);
+ writel(0x00000000, 0XF80062AC);
+ writel(0x00005125, 0XF80062B0);
+ writel(0x000012A8, 0XF80062B4);
+ writel(0x00000081, 0XF8006000);
+
+ /* poor mans pinctrl */
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xC0);
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC4);
+ /* UART1 pinmux */
+ writel(0x000002E1, ZYNQ_MIO_BASE + 0xC8);
+ writel(0x000002E0, ZYNQ_MIO_BASE + 0xCC);
+
+ /* poor mans clkctrl */
+ writel(0x00001403, ZYNQ_UART_CLK_CTRL);
+
+ writel(0x00000001, 0xf8000138);
+ writel(0x00100801, 0xf8000140);
+ writel(0x00000302, 0xf8000740);
+ writel(0x00000302, 0xf8000744);
+ writel(0x00000302, 0xf8000748);
+ writel(0x00000302, 0xf800074C);
+ writel(0x00000302, 0xf8000750);
+ writel(0x00000302, 0xf8000754);
+
+ /* lock up. secure, secure */
+ writel(0x0000767B, ZYNQ_SLCR_LOCK);
+
+ arm_cpu_lowlevel_init();
+ barebox_arm_entry(0x10000, SZ_512M, 0);
+}
diff --git a/arch/arm/configs/zedboard_defconfig b/arch/arm/configs/zedboard_defconfig
new file mode 100644
index 0000000..a9d52dd
--- /dev/null
+++ b/arch/arm/configs/zedboard_defconfig
@@ -0,0 +1,356 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Barebox/arm 2013.03.0 Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_LINUX=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_S3C24xx is not set
+# CONFIG_ARCH_S5PCxx is not set
+# CONFIG_ARCH_S3C64xx is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_TEGRA is not set
+CONFIG_ARCH_ZYNQ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+
+#
+# processor features
+#
+# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_ARCH_TEXT_BASE=0x1ff00000
+CONFIG_BOARDINFO="ZedBoard"
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_ARCH_ZYNQ7000=y
+CONFIG_MACH_ZEDBOARD=y
+CONFIG_AEABI=y
+# CONFIG_THUMB2_BAREBOX is not set
+# CONFIG_ARM_BOARD_APPEND_ATAG is not set
+
+#
+# Arm specific settings
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_CMD_ARM_MMUINFO=y
+# CONFIG_CPU_V7_DCACHE_SKIP is not set
+# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
+CONFIG_ARM_EXCEPTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_CMD_MEMORY=y
+CONFIG_ENV_HANDLING=y
+CONFIG_FILETYPE=y
+CONFIG_BINFMT=y
+CONFIG_UIMAGE=y
+CONFIG_GLOBALVAR=y
+CONFIG_STDDEV=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BANNER=y
+CONFIG_MEMINFO=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_PBL_IMAGE=y
+CONFIG_HAVE_IMAGE_COMPRESSION=y
+# CONFIG_PBL_IMAGE is not set
+CONFIG_MMU=y
+CONFIG_MMU_EARLY=y
+CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
+CONFIG_TEXT_BASE=0x1ff00000
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
+CONFIG_STACK_SIZE=0xf000
+CONFIG_MALLOC_SIZE=0x8000000
+# CONFIG_BROKEN is not set
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_MALLOC_DLMALLOC is not set
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="barebox:"
+CONFIG_BAUDRATE=115200
+# CONFIG_LONGHELP is not set
+CONFIG_CBSIZE=1024
+CONFIG_MAXARGS=16
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_SHELL_NONE is not set
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_PROMPT_HUSH_PS2="> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_HUSH_GETOPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_PASSWORD is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_CONSOLE_FULL=y
+# CONFIG_CONSOLE_SIMPLE is not set
+# CONFIG_CONSOLE_NONE is not set
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_CONSOLE_ACTIVATE_ALL is not set
+# CONFIG_CONSOLE_ACTIVATE_NONE is not set
+# CONFIG_PARTITION is not set
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+# CONFIG_DEFAULT_ENVIRONMENT_GENERIC is not set
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/avnet-zedboard/env"
+# CONFIG_BAREBOXENV_TARGET is not set
+# CONFIG_POLLER is not set
+# CONFIG_RESET_SOURCE is not set
+
+#
+# Debugging
+#
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_FLASH_NOISE is not set
+# CONFIG_ENABLE_PARTITION_NOISE is not set
+# CONFIG_ENABLE_DEVICE_NOISE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_COMMAND_SUPPORT=y
+# CONFIG_HAS_POWEROFF is not set
+
+#
+# commands
+#
+
+#
+# scripting
+#
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+# CONFIG_CMD_MSLEEP is not set
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+# CONFIG_CMD_LET is not set
+CONFIG_CMD_TRUE=y
+CONFIG_CMD_FALSE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+# CONFIG_CMD_LOGIN is not set
+# CONFIG_CMD_PASSWD is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GLOBAL=y
+
+#
+# file commands
+#
+CONFIG_CMD_LS=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_RMDIR=y
+CONFIG_CMD_CP=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_READLINK=y
+# CONFIG_CMD_FILETYPE is not set
+
+#
+# console
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+# CONFIG_CMD_ECHO_E is not set
+
+#
+# memory
+#
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADY is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_IOMEM is not set
+# CONFIG_CMD_CRC is not set
+# CONFIG_CMD_MD5SUM is not set
+# CONFIG_CMD_SHA1SUM is not set
+# CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_SHA224SUM is not set
+
+#
+# flash
+#
+# CONFIG_CMD_FLASH is not set
+
+#
+# booting
+#
+CONFIG_CMD_BOOTM=y
+# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
+CONFIG_CMD_BOOTM_VERBOSE=y
+# CONFIG_CMD_BOOTM_INITRD is not set
+CONFIG_CMD_BOOTM_OFTREE=y
+# CONFIG_CMD_BOOTM_OFTREE_UIMAGE is not set
+# CONFIG_CMD_BOOTM_AIMAGE is not set
+# CONFIG_CMD_UIMAGE is not set
+# CONFIG_CMD_BOOTZ is not set
+CONFIG_CMD_BOOTU=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+CONFIG_CMD_RESET=y
+# CONFIG_CMD_GO is not set
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OFTREE_PROBE=y
+# CONFIG_CMD_OF_PROPERTY is not set
+# CONFIG_CMD_OF_NODE is not set
+
+#
+# testing
+#
+# CONFIG_CMD_MTEST is not set
+
+#
+# video command
+#
+# CONFIG_CMD_BAREBOX_UPDATE is not set
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_VERSION=y
+# CONFIG_CMD_HELP is not set
+# CONFIG_CMD_MAGICVAR is not set
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_UNCOMPRESS is not set
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+# CONFIG_NET_NFS is not set
+# CONFIG_NET_PING is not set
+# CONFIG_NET_NETCONSOLE is not set
+# CONFIG_NET_RESOLV is not set
+
+#
+# Drivers
+#
+
+#
+# serial drivers
+#
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+CONFIG_DRIVER_SERIAL_CADENCE=y
+
+#
+# Network drivers
+#
+
+#
+# phylib
+#
+# CONFIG_DRIVER_NET_CPSW is not set
+# CONFIG_DRIVER_NET_SMC911X is not set
+# CONFIG_DRIVER_NET_SMC91111 is not set
+# CONFIG_DRIVER_NET_KS8851_MLL is not set
+
+#
+# SPI drivers
+#
+# CONFIG_SPI is not set
+# CONFIG_I2C is not set
+
+#
+# flash drivers
+#
+# CONFIG_DRIVER_CFI is not set
+# CONFIG_MTD is not set
+# CONFIG_DISK is not set
+# CONFIG_USB is not set
+# CONFIG_VIDEO is not set
+# CONFIG_MCI is not set
+
+#
+# MFD
+#
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_LED is not set
+
+#
+# EEPROM support
+#
+
+#
+# Input device support
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_PWM is not set
+
+#
+# DMA support
+#
+CONFIG_OFDEVICE=y
+# CONFIG_W1 is not set
+
+#
+# Filesystem support
+#
+CONFIG_FS=y
+CONFIG_FS_AUTOMOUNT=y
+# CONFIG_FS_CRAMFS is not set
+# CONFIG_FS_EXT4 is not set
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+# CONFIG_FS_TFTP is not set
+# CONFIG_FS_NFS is not set
+# CONFIG_FS_FAT is not set
+
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+# CONFIG_ZLIB is not set
+# CONFIG_BZLIB is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+# CONFIG_LZO_DECOMPRESS is not set
+CONFIG_FDT=y
+CONFIG_OFTREE=y
+CONFIG_QSORT=y
+
+#
+# Library gui routines
+#
+CONFIG_CRC32=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
+# CONFIG_SHA1 is not set
+# CONFIG_SHA224 is not set
+# CONFIG_SHA256 is not set
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 8eb67d2..cec749a 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -24,6 +24,7 @@ choice
config MACH_ZEDBOARD
bool "Avnet Zynq-7000 ZedBoard"
+ select MACH_HAS_LOWLEVEL_INIT
endchoice
endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq7000-regs.h b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
index 58fc712..faf697c 100644
--- a/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
+++ b/arch/arm/mach-zynq/include/mach/zynq7000-regs.h
@@ -1,5 +1,5 @@
/*
- * (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/arm/mach-zynq/zynq.c b/arch/arm/mach-zynq/zynq.c
index e11086b..2043655 100644
--- a/arch/arm/mach-zynq/zynq.c
+++ b/arch/arm/mach-zynq/zynq.c
@@ -18,11 +18,6 @@
#include <init.h>
#include <mach/zynq7000-regs.h>
-void zynq_init_lowlevel(void)
-{
- return;
-}
-
static int zynq_init(void)
{
return 0;
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-03-11 9:15 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-11 9:14 [PATCH 0/9] ARM: add support for Zynq Steffen Trumtrar
2013-03-11 9:14 ` [PATCH 1/9] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-11 9:56 ` Sascha Hauer
2013-03-11 9:14 ` [PATCH 2/9] ARM: Zynq: Add new architecture zynq Steffen Trumtrar
2013-03-11 10:04 ` Sascha Hauer
2013-03-11 18:13 ` Josh Cartwright
2013-03-12 13:42 ` Josh Cartwright
2013-03-11 9:15 ` [PATCH 3/9] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-11 10:05 ` Sascha Hauer
2013-03-11 9:15 ` Steffen Trumtrar [this message]
2013-03-11 10:06 ` [PATCH 4/9] ARM: zynq: Add support for the Avnet Zedboard Sascha Hauer
2013-03-11 9:15 ` [PATCH 5/9] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 6/9] ARM: zynq: clk: replace define with header Steffen Trumtrar
2013-03-11 18:29 ` Josh Cartwright
2013-03-11 18:55 ` Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 7/9] ARM: zynq: clk: add pll type Steffen Trumtrar
2013-03-11 18:28 ` Josh Cartwright
2013-03-11 18:59 ` Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 8/9] ARM: zynq: clk: convert to platform driver Steffen Trumtrar
2013-03-11 9:15 ` [PATCH 9/9] ARM: zynq: remove clocksource Steffen Trumtrar
2013-03-11 18:17 ` Josh Cartwright
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362993306-19262-5-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox