mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>,
	Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH 1/2] net: macb: remove gem_recv and reorder probe
Date: Wed, 13 Mar 2013 09:48:13 +0100	[thread overview]
Message-ID: <1363164494-3614-1-git-send-email-s.trumtrar@pengutronix.de> (raw)

The function gem_recv implements a buffer "ring" that stops at filling level 10.
That means, when the driver is used as gem, it stops receiving after exactly
10 packets. Instead of implementing macb_recv twice, use it also for the gem
part. If there needs to be an extra recv function for the gigabit case, it can
be added than.
Also, first set the type of device (macb or gem) and then use functions that
use this info.

Tested on a Zynq7000.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/net/macb.c | 47 +++++++----------------------------------------
 1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 8602437..a12eea7 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -169,37 +169,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
 	macb->rx_tail = new_tail;
 }
 
-static int gem_recv(struct eth_device *edev)
-{
-	struct macb_device *macb = edev->priv;
-	unsigned int rx_tail = macb->rx_tail;
-	void *buffer;
-	int length;
-	u32 status;
-
-	dev_dbg(macb->dev, "%s\n", __func__);
-
-	for (;;) {
-		barrier();
-		if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
-			return -1;
-
-		barrier();
-		status = macb->rx_ring[rx_tail].ctrl;
-		length = MACB_BFEXT(RX_FRMLEN, status);
-		if (status & MACB_BIT(RX_SOF)) {
-			buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
-			net_receive(buffer, length);
-			macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
-			barrier();
-		}
-		rx_tail++;
-		macb->rx_tail++;
-	}
-
-	return 0;
-}
-
 static int macb_recv(struct eth_device *edev)
 {
 	struct macb_device *macb = edev->priv;
@@ -619,11 +588,6 @@ static int macb_probe(struct device_d *dev)
 
 	macb->phy_flags = pdata->phy_flags;
 
-	macb_init_rx_buffer_size(macb, PKTSIZE);
-	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
-	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
-	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
-
 	macb->regs = dev_request_mem_region(dev, 0);
 
 	/*
@@ -638,12 +602,15 @@ static int macb_probe(struct device_d *dev)
 
 	clk_enable(macb->pclk);
 
-	if (macb_is_gem(macb))
-		edev->recv = gem_recv;
-	else
-		edev->recv = macb_recv;
 	macb->is_gem = read_is_gem(macb);
 
+	macb_init_rx_buffer_size(macb, PKTSIZE);
+	macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
+	macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
+	macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
+
+	edev->recv = macb_recv;
+
 	macb_reset_hw(macb);
 	ncfgr = macb_mdc_clk_div(macb);
 	ncfgr |= MACB_BIT(PAE);		/* PAuse Enable */
-- 
1.8.2.rc2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-03-13  8:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-13  8:48 Steffen Trumtrar [this message]
2013-03-13  8:48 ` [PATCH 2/2] net: macb: turn off endian_swp_pkt_en Steffen Trumtrar
2013-03-13  9:04   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13  9:17     ` Steffen Trumtrar
2013-03-13  9:03 ` [PATCH 1/2] net: macb: remove gem_recv and reorder probe Jean-Christophe PLAGNIOL-VILLARD
2013-03-13  9:19   ` Steffen Trumtrar
2013-03-13  9:32     ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13  9:33       ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 10:15   ` Sascha Hauer
2013-03-13 12:17     ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 13:08       ` Steffen Trumtrar
2013-03-13 15:36         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363164494-3614-1-git-send-email-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=nicolas.ferre@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox