* [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2
@ 2013-03-14 10:40 Alexander Shiyan
2013-03-14 10:40 ` [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB Alexander Shiyan
2013-03-15 7:27 ` [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Alexander Shiyan @ 2013-03-14 10:40 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/env/boot/nand | 9 ++++++
arch/arm/boards/ccxmx51/env/config | 37 ------------------------
arch/arm/boards/ccxmx51/env/config-board | 12 ++++++++
arch/arm/boards/ccxmx51/env/init/mtdparts-nand | 11 +++++++
arch/arm/configs/ccmx51_defconfig | 9 ++++--
5 files changed, 38 insertions(+), 40 deletions(-)
create mode 100644 arch/arm/boards/ccxmx51/env/boot/nand
delete mode 100644 arch/arm/boards/ccxmx51/env/config
create mode 100644 arch/arm/boards/ccxmx51/env/config-board
create mode 100644 arch/arm/boards/ccxmx51/env/init/mtdparts-nand
diff --git a/arch/arm/boards/ccxmx51/env/boot/nand b/arch/arm/boards/ccxmx51/env/boot/nand
new file mode 100644
index 0000000..bb11465
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/boot/nand
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ boot-menu-add-entry "$0" "NAND Flash"
+ exit
+fi
+
+global.bootm.image="/dev/kernel"
+global.linux.bootargs.dyn.root="root=/dev/mtdblock3 ro"
diff --git a/arch/arm/boards/ccxmx51/env/config b/arch/arm/boards/ccxmx51/env/config
deleted file mode 100644
index bbd43e7..0000000
--- a/arch/arm/boards/ccxmx51/env/config
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-
-machine=ccmx51
-
-# use 'dhcp' to do dhcp in barebox and in kernel
-# use 'none' if you want to skip kernel ip autoconfiguration
-ip=none
-
-# or set your networking parameters here
-#eth0.ipaddr=a.b.c.d
-#eth0.netmask=a.b.c.d
-#eth0.gateway=a.b.c.d
-#eth0.serverip=a.b.c.d
-
-# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=nand
-# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=nand
-
-# rootfs
-rootfs_type=cramfs
-
-# kernel
-kernelimage_type=zimage
-kernel_img=/dev/nand0.kernel
-
-autoboot_timeout=3
-
-bootargs="console=ttymxc0,115200"
-
-device_type="nand"
-nand_device="mxc_nand"
-nand_parts="512k(barebox)ro,256k(bareboxenv),3328k(kernel),-(root)"
-rootfs_mtdblock_nand=3
-
-# set a fancy prompt (if support is compiled in)
-PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
diff --git a/arch/arm/boards/ccxmx51/env/config-board b/arch/arm/boards/ccxmx51/env/config-board
new file mode 100644
index 0000000..26acb4b
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/config-board
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+global.hostname=ccmx51
+
+# Timeout in seconds before the default boot entry is started
+global.autoboot_timeout=2
+
+# Default boot entry (one of /env/boot/*)
+global.boot.default=nand
+
+# Board bootargs
+global.linux.bootargs.base="earlyprintk console=ttymxc0,115200n8"
diff --git a/arch/arm/boards/ccxmx51/env/init/mtdparts-nand b/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
new file mode 100644
index 0000000..a4315cd
--- /dev/null
+++ b/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+ init-menu-add-entry "$0" "NAND partitions"
+ exit
+fi
+
+mtdparts="512k(barebox)ro,256k(bareboxenv),3328k(kernel),-(root)"
+kernelname="mxc_nand"
+
+mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/configs/ccmx51_defconfig b/arch/arm/configs/ccmx51_defconfig
index 67d1dd2..b406686 100644
--- a/arch/arm/configs/ccmx51_defconfig
+++ b/arch/arm/configs/ccmx51_defconfig
@@ -7,13 +7,12 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0x2000000
CONFIG_LONGHELP=y
-CONFIG_GLOB=y
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_DEFAULT_ENVIRONMENT_COMPRESSED_LZO=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="defaultenv arch/arm/boards/ccxmx51/env"
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/ccxmx51/env"
CONFIG_CMD_EDIT=y
CONFIG_CMD_SLEEP=y
CONFIG_CMD_SAVEENV=y
@@ -22,11 +21,15 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OFTREE_PROBE=y
CONFIG_CMD_NANDTEST=y
CONFIG_CMD_MTEST=y
CONFIG_CMD_TIMEOUT=y
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB
2013-03-14 10:40 [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Alexander Shiyan
@ 2013-03-14 10:40 ` Alexander Shiyan
2013-03-15 7:27 ` [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Alexander Shiyan @ 2013-03-14 10:40 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 51 +++---------------------------------
1 files changed, 5 insertions(+), 46 deletions(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index b1c579b..8230f55 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -195,51 +195,10 @@ static const struct spi_board_info ccxmx51_spi_board_info[] = {
},
};
-static void ccxmx51_otghost_init(void)
-{
-#define MX51_USBOTHER_REGS_OFFSET 0x800
-#define MX51_USBCTRL_OFFSET 0x0
-#define MX51_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MX51_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MX51_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x00
-#define MX51_USB_PLL_DIV_24_MHZ 0x01
-#define MX51_USB_PLL_DIV_26_MHZ 0x02
-#define MX51_USB_PLL_DIV_27_MHZ 0x03
-#define MX51_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
-#define MX51_OTG_UCTRL_OWIE_BIT (1 << 27)
-#define MX51_OTG_UCTRL_OPM_BIT (1 << 24)
-
-#define USBOTHER_BASE (MX51_OTG_BASE_ADDR + MX51_USBOTHER_REGS_OFFSET)
-
- u32 reg;
-
- /* Set sysclock to 24 MHz */
- reg = readl(USBOTHER_BASE + MX51_USB_PHY_CTR_FUNC2_OFFSET);
- reg &= ~MX51_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- reg |= MX51_USB_PLL_DIV_24_MHZ;
- writel(reg, USBOTHER_BASE + MX51_USB_PHY_CTR_FUNC2_OFFSET);
-
- /* OC is not used */
- reg = readl(USBOTHER_BASE + MX51_USB_PHY_CTR_FUNC_OFFSET);
- reg |= MX51_OTG_PHYCTRL_OC_DIS_BIT;
- writel(reg, USBOTHER_BASE + MX51_USB_PHY_CTR_FUNC_OFFSET);
-
- /* Power pins enable */
- reg = readl(USBOTHER_BASE + MX51_USBCTRL_OFFSET);
- reg |= MX51_OTG_UCTRL_OWIE_BIT | MX51_OTG_UCTRL_OPM_BIT;
- writel(reg, USBOTHER_BASE + MX51_USBCTRL_OFFSET);
-
- /* Setup PORTSC */
- reg = readl(MX51_OTG_BASE_ADDR + 0x184);
- reg &= ~(3 << 30);
- reg |= 1 << 28;
- writel(reg, MX51_OTG_BASE_ADDR + 0x184);
-
- mdelay(10);
-
- add_generic_usb_ehci_device(0, MX51_OTG_BASE_ADDR, NULL);
-}
+static struct imxusb_platformdata ccxmx51_otg_pdata = {
+ .flags = MXC_EHCI_MODE_UTMI_16_BIT | MXC_EHCI_POWER_PINS_ENABLED,
+ .mode = IMX_USB_MODE_HOST,
+};
static int ccxmx51_power_init(void)
{
@@ -453,7 +412,7 @@ static int ccxmx51_devices_init(void)
add_generic_device("smc911x", 1, NULL, MX51_CS5_BASE_ADDR, SZ_4K, IORESOURCE_MEM, NULL);
}
- ccxmx51_otghost_init();
+ imx51_add_usbotg(&ccxmx51_otg_pdata);
armlinux_set_bootparams((void *)(MX51_CSD0_BASE_ADDR + 0x100));
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2
2013-03-14 10:40 [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Alexander Shiyan
2013-03-14 10:40 ` [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB Alexander Shiyan
@ 2013-03-15 7:27 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2013-03-15 7:27 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Thu, Mar 14, 2013 at 02:40:05PM +0400, Alexander Shiyan wrote:
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/ccxmx51/env/boot/nand | 9 ++++++
> arch/arm/boards/ccxmx51/env/config | 37 ------------------------
> arch/arm/boards/ccxmx51/env/config-board | 12 ++++++++
> arch/arm/boards/ccxmx51/env/init/mtdparts-nand | 11 +++++++
> arch/arm/configs/ccmx51_defconfig | 9 ++++--
> 5 files changed, 38 insertions(+), 40 deletions(-)
> create mode 100644 arch/arm/boards/ccxmx51/env/boot/nand
> delete mode 100644 arch/arm/boards/ccxmx51/env/config
> create mode 100644 arch/arm/boards/ccxmx51/env/config-board
> create mode 100644 arch/arm/boards/ccxmx51/env/init/mtdparts-nand
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/ccxmx51/env/boot/nand b/arch/arm/boards/ccxmx51/env/boot/nand
> new file mode 100644
> index 0000000..bb11465
> --- /dev/null
> +++ b/arch/arm/boards/ccxmx51/env/boot/nand
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + boot-menu-add-entry "$0" "NAND Flash"
> + exit
> +fi
> +
> +global.bootm.image="/dev/kernel"
> +global.linux.bootargs.dyn.root="root=/dev/mtdblock3 ro"
> diff --git a/arch/arm/boards/ccxmx51/env/config b/arch/arm/boards/ccxmx51/env/config
> deleted file mode 100644
> index bbd43e7..0000000
> --- a/arch/arm/boards/ccxmx51/env/config
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -#!/bin/sh
> -
> -machine=ccmx51
> -
> -# use 'dhcp' to do dhcp in barebox and in kernel
> -# use 'none' if you want to skip kernel ip autoconfiguration
> -ip=none
> -
> -# or set your networking parameters here
> -#eth0.ipaddr=a.b.c.d
> -#eth0.netmask=a.b.c.d
> -#eth0.gateway=a.b.c.d
> -#eth0.serverip=a.b.c.d
> -
> -# can be either 'nfs', 'tftp' or 'nand'
> -kernel_loc=nand
> -# can be either 'net', 'nand' or 'initrd'
> -rootfs_loc=nand
> -
> -# rootfs
> -rootfs_type=cramfs
> -
> -# kernel
> -kernelimage_type=zimage
> -kernel_img=/dev/nand0.kernel
> -
> -autoboot_timeout=3
> -
> -bootargs="console=ttymxc0,115200"
> -
> -device_type="nand"
> -nand_device="mxc_nand"
> -nand_parts="512k(barebox)ro,256k(bareboxenv),3328k(kernel),-(root)"
> -rootfs_mtdblock_nand=3
> -
> -# set a fancy prompt (if support is compiled in)
> -PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> diff --git a/arch/arm/boards/ccxmx51/env/config-board b/arch/arm/boards/ccxmx51/env/config-board
> new file mode 100644
> index 0000000..26acb4b
> --- /dev/null
> +++ b/arch/arm/boards/ccxmx51/env/config-board
> @@ -0,0 +1,12 @@
> +#!/bin/sh
> +
> +global.hostname=ccmx51
> +
> +# Timeout in seconds before the default boot entry is started
> +global.autoboot_timeout=2
> +
> +# Default boot entry (one of /env/boot/*)
> +global.boot.default=nand
> +
> +# Board bootargs
> +global.linux.bootargs.base="earlyprintk console=ttymxc0,115200n8"
> diff --git a/arch/arm/boards/ccxmx51/env/init/mtdparts-nand b/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
> new file mode 100644
> index 0000000..a4315cd
> --- /dev/null
> +++ b/arch/arm/boards/ccxmx51/env/init/mtdparts-nand
> @@ -0,0 +1,11 @@
> +#!/bin/sh
> +
> +if [ "$1" = menu ]; then
> + init-menu-add-entry "$0" "NAND partitions"
> + exit
> +fi
> +
> +mtdparts="512k(barebox)ro,256k(bareboxenv),3328k(kernel),-(root)"
> +kernelname="mxc_nand"
> +
> +mtdparts-add -b -d nand0 -k ${kernelname} -p ${mtdparts}
> diff --git a/arch/arm/configs/ccmx51_defconfig b/arch/arm/configs/ccmx51_defconfig
> index 67d1dd2..b406686 100644
> --- a/arch/arm/configs/ccmx51_defconfig
> +++ b/arch/arm/configs/ccmx51_defconfig
> @@ -7,13 +7,12 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> CONFIG_MMU=y
> CONFIG_MALLOC_SIZE=0x2000000
> CONFIG_LONGHELP=y
> -CONFIG_GLOB=y
> CONFIG_HUSH_FANCY_PROMPT=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> CONFIG_DEFAULT_ENVIRONMENT_COMPRESSED_LZO=y
> -CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> -CONFIG_DEFAULT_ENVIRONMENT_PATH="defaultenv arch/arm/boards/ccxmx51/env"
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/ccxmx51/env"
> CONFIG_CMD_EDIT=y
> CONFIG_CMD_SLEEP=y
> CONFIG_CMD_SAVEENV=y
> @@ -22,11 +21,15 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_READLINE=y
> CONFIG_CMD_ECHO_E=y
> CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_CRC_CMP=y
> CONFIG_CMD_FLASH=y
> CONFIG_CMD_BOOTM_SHOW_TYPE=y
> CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_RESET=y
> CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_OFTREE_PROBE=y
> CONFIG_CMD_NANDTEST=y
> CONFIG_CMD_MTEST=y
> CONFIG_CMD_TIMEOUT=y
> --
> 1.7.3.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-03-15 7:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-14 10:40 [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Alexander Shiyan
2013-03-14 10:40 ` [PATCH 2/2] arm: ccmx51: Using imx51_add_usbotg() function for register USB Alexander Shiyan
2013-03-15 7:27 ` [PATCH 1/2] ARM: ccmx51: Migrate to defaultenv-2 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox