From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wg0-f47.google.com ([74.125.82.47]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UH05o-0007TO-WF for barebox@lists.infradead.org; Sat, 16 Mar 2013 23:00:51 +0000 Received: by mail-wg0-f47.google.com with SMTP id dr13so4145003wgb.14 for ; Sat, 16 Mar 2013 16:00:47 -0700 (PDT) From: Vicente Bergas Date: Sat, 16 Mar 2013 23:59:40 +0100 Message-Id: <1363474782-21973-5-git-send-email-vicencb@gmail.com> In-Reply-To: <1363474782-21973-1-git-send-email-vicencb@gmail.com> References: <1363474782-21973-1-git-send-email-vicencb@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 4/6] OMAP4: add command to select next boot device priority To: barebox@lists.infradead.org Cc: Vicente Bergas On OMAP4 SoC there is a SAR memory region (Save & Rescue) where the ROM code reads the device to boot from. This patch adds a way to set this. Signed-off-by: Vicente Bergas --- arch/arm/mach-omap/include/mach/omap4-silicon.h | 20 +++++++ arch/arm/mach-omap/omap4_generic.c | 20 +++++++ commands/Kconfig | 5 ++ commands/Makefile | 1 + commands/boot_order.c | 75 +++++++++++++++++++++++++ 5 files changed, 121 insertions(+) create mode 100644 commands/boot_order.c diff --git a/arch/arm/mach-omap/include/mach/omap4-silicon.h b/arch/arm/mach-omap/include/mach/omap4-silicon.h index 9e82435..666e721 100644 --- a/arch/arm/mach-omap/include/mach/omap4-silicon.h +++ b/arch/arm/mach-omap/include/mach/omap4-silicon.h @@ -161,6 +161,25 @@ #define OMAP44XX_PRM_RSTCTRL_RESET 0x01 /* + * SAR (Save & Rescue) memory region + */ +#define OMAP44XX_SAR_RAM_BASE 0x4a326000 +#define OMAP44XX_SAR_CH_ADDRESS (OMAP44XX_SAR_RAM_BASE + 0xA00) +#define OMAP44XX_SAR_CH_START (OMAP44XX_SAR_RAM_BASE + 0xA0C) +#define OMAP44XX_SAR_BOOT_VOID 0x00 +#define OMAP44XX_SAR_BOOT_XIP 0x01 +#define OMAP44XX_SAR_BOOT_XIPWAIT 0x02 +#define OMAP44XX_SAR_BOOT_NAND 0x03 +#define OMAP44XX_SAR_BOOT_ONENAND 0x04 +#define OMAP44XX_SAR_BOOT_MMC1 0x05 +#define OMAP44XX_SAR_BOOT_MMC2_1 0x06 +#define OMAP44XX_SAR_BOOT_MMC2_2 0x07 +#define OMAP44XX_SAR_BOOT_UART 0x43 +#define OMAP44XX_SAR_BOOT_USB_1 0x45 +#define OMAP44XX_SAR_BOOT_USB_ULPI 0x46 +#define OMAP44XX_SAR_BOOT_USB_2 0x47 + +/* * Non-secure SRAM Addresses * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE * at 0x40304000(EMU base) so that our code works for both EMU and GP @@ -212,6 +231,7 @@ void omap4_ddr_init(const struct ddr_regs *, const struct dpll_param *); void omap4_power_i2c_send(u32); unsigned int omap4_revision(void); noinline int omap4_scale_vcores(unsigned vsel0_pin); +void omap4_set_warmboot_order(u32 *device_list); #endif diff --git a/arch/arm/mach-omap/omap4_generic.c b/arch/arm/mach-omap/omap4_generic.c index 2a09eb6..e062332 100644 --- a/arch/arm/mach-omap/omap4_generic.c +++ b/arch/arm/mach-omap/omap4_generic.c @@ -41,6 +41,26 @@ void __noreturn reset_cpu(unsigned long addr) while (1); } +void omap4_set_warmboot_order(u32 *device_list) +{ + const u32 CH[] = { + 0xCF00AA01, + 0x0000000C, + (device_list[0] << 16) | 0x0000, + (device_list[2] << 16) | device_list[1], + 0x0000 | device_list[3], + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000 + }; + int i; + + for (i = 0; i < ARRAY_SIZE(CH); i++) + writel(CH[i], OMAP44XX_SAR_CH_START + i*sizeof(CH[0])); + writel(OMAP44XX_SAR_CH_START, OMAP44XX_SAR_CH_ADDRESS); +} + #define WATCHDOG_WSPR 0x48 #define WATCHDOG_WWPS 0x34 diff --git a/commands/Kconfig b/commands/Kconfig index 0062758..524f00e 100644 --- a/commands/Kconfig +++ b/commands/Kconfig @@ -474,6 +474,11 @@ config CMD_POWEROFF depends on HAS_POWEROFF prompt "poweroff" +config CMD_BOOT_ORDER + tristate + depends on ARCH_OMAP4 + prompt "boot_order" + config CMD_GO tristate prompt "go" diff --git a/commands/Makefile b/commands/Makefile index 0ae6b95..428da57 100644 --- a/commands/Makefile +++ b/commands/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_CMD_SLEEP) += sleep.o obj-$(CONFIG_CMD_MSLEEP) += msleep.o obj-$(CONFIG_CMD_RESET) += reset.o obj-$(CONFIG_CMD_POWEROFF) += poweroff.o +obj-$(CONFIG_CMD_BOOT_ORDER) += boot_order.o obj-$(CONFIG_CMD_GO) += go.o obj-$(CONFIG_NET) += net.o obj-$(CONFIG_CMD_PARTITION) += partition.o diff --git a/commands/boot_order.c b/commands/boot_order.c new file mode 100644 index 0000000..66b87bc --- /dev/null +++ b/commands/boot_order.c @@ -0,0 +1,75 @@ +/* + * boot_order.c - configure omap warm boot + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +struct bootsrc { + const char *name; + uint32_t sar; +}; + +static int cmd_boot_order(int argc, char *argv[]) +{ + const struct bootsrc src_list[] = { + {"xip" , OMAP44XX_SAR_BOOT_XIP }, + {"xipwait" , OMAP44XX_SAR_BOOT_XIPWAIT }, + {"nand" , OMAP44XX_SAR_BOOT_NAND }, + {"onenand" , OMAP44XX_SAR_BOOT_ONENAND }, + {"mmc1" , OMAP44XX_SAR_BOOT_MMC1 }, + {"mmc2_1" , OMAP44XX_SAR_BOOT_MMC2_1 }, + {"mmc2_2" , OMAP44XX_SAR_BOOT_MMC2_2 }, + {"uart" , OMAP44XX_SAR_BOOT_UART }, + {"usb_1" , OMAP44XX_SAR_BOOT_USB_1 }, + {"usb_ulpi", OMAP44XX_SAR_BOOT_USB_ULPI}, + {"usb_2" , OMAP44XX_SAR_BOOT_USB_2 }, + }; + uint32_t device_list[] = { + OMAP44XX_SAR_BOOT_VOID, + OMAP44XX_SAR_BOOT_VOID, + OMAP44XX_SAR_BOOT_VOID, + OMAP44XX_SAR_BOOT_VOID, + }; + int i, j; + + for (i = 0; i + 1 < argc && i < ARRAY_SIZE(device_list); i++) { + for (j = 0; j < ARRAY_SIZE(src_list); j++) { + if (strcmp(argv[i + 1], src_list[j].name) == 0) { + device_list[i] = src_list[j].sar; + break; + } + } + } + if (device_list[0] == OMAP44XX_SAR_BOOT_VOID) { + printf("First boot device can't be void\n"); + return COMMAND_ERROR_USAGE; + } + omap4_set_warmboot_order(device_list); + return 0; +} + +static const __maybe_unused char cmd_boot_order_help[] = +"Usage: boot_order []\n" +"Set warm boot order of up to four devices.\n" +"Each device can be one of:\n" +"xip xipwait nand onenand mmc1 mmc2_1 mmc2_2 uart usb_1 usb_ulpi usb_2\n"; + +BAREBOX_CMD_START(boot_order) + .cmd = cmd_boot_order, + .usage = "boot_order []", + BAREBOX_CMD_HELP(cmd_boot_order_help) + BAREBOX_CMD_COMPLETE(empty_complete) +BAREBOX_CMD_END -- 1.8.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox