mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Subject: [PATCH v2 0/5] ARM: add support for Zynq
Date: Tue, 19 Mar 2013 10:21:55 +0100	[thread overview]
Message-ID: <1363684920-3034-1-git-send-email-s.trumtrar@pengutronix.de> (raw)

Hi!

Still nothing fancy. Boots a little faster from SD and has a console.
For ethernet the macb-driver works fine, but needs to be "freed" from its
at91 heritage (meaning: the struct at91_ether_platform_data should be
renamed first and defined someplace else than a board.h)

Changelog:
	- addressed all comments by Sascha and Josh
	  (some uart stuff, defines, endianess, ...)
	- squashed a little

Regards,
Steffen


Steffen Trumtrar (5):
  serial: Add driver for Cadence UART
  ARM: zynq: Add new architecture zynq
  ARM: zynq: add clk support for zynq7000
  ARM: zynq: add zynq fsbl checksum script
  ARM: zynq: Add support for the Avnet Zedboard

 arch/arm/Kconfig                                   |   5 +
 arch/arm/Makefile                                  |   2 +
 arch/arm/boards/avnet-zedboard/Makefile            |   1 +
 arch/arm/boards/avnet-zedboard/board.c             |  38 ++
 arch/arm/boards/avnet-zedboard/config.h            |   4 +
 .../boards/avnet-zedboard/env/init/config-board    |   7 +
 arch/arm/boards/avnet-zedboard/flash_header.c      |  76 ++++
 arch/arm/boards/avnet-zedboard/lowlevel.c          | 252 +++++++++++++
 arch/arm/configs/zedboard_defconfig                |  45 +++
 arch/arm/mach-zynq/Kconfig                         |  39 ++
 arch/arm/mach-zynq/Makefile                        |   1 +
 arch/arm/mach-zynq/clk-zynq7000.c                  | 417 +++++++++++++++++++++
 arch/arm/mach-zynq/devices.c                       |  14 +
 arch/arm/mach-zynq/include/mach/barebox.lds.h      |   9 +
 arch/arm/mach-zynq/include/mach/clkdev.h           |   6 +
 arch/arm/mach-zynq/include/mach/debug_ll.h         |  37 ++
 arch/arm/mach-zynq/include/mach/devices.h          |  13 +
 .../arm/mach-zynq/include/mach/zynq-flash-header.h |  40 ++
 arch/arm/mach-zynq/include/mach/zynq7000-regs.h    | 132 +++++++
 arch/arm/mach-zynq/zynq.c                          |  56 +++
 drivers/serial/Kconfig                             |   4 +
 drivers/serial/Makefile                            |   1 +
 drivers/serial/serial_cadence.c                    | 307 +++++++++++++++
 include/asm-generic/barebox.lds.h                  |   3 +-
 scripts/Makefile                                   |   1 +
 scripts/zynq_checksum.c                            |  72 ++++
 26 files changed, 1581 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/avnet-zedboard/Makefile
 create mode 100644 arch/arm/boards/avnet-zedboard/board.c
 create mode 100644 arch/arm/boards/avnet-zedboard/config.h
 create mode 100644 arch/arm/boards/avnet-zedboard/env/init/config-board
 create mode 100644 arch/arm/boards/avnet-zedboard/flash_header.c
 create mode 100644 arch/arm/boards/avnet-zedboard/lowlevel.c
 create mode 100644 arch/arm/configs/zedboard_defconfig
 create mode 100644 arch/arm/mach-zynq/Kconfig
 create mode 100644 arch/arm/mach-zynq/Makefile
 create mode 100644 arch/arm/mach-zynq/clk-zynq7000.c
 create mode 100644 arch/arm/mach-zynq/devices.c
 create mode 100644 arch/arm/mach-zynq/include/mach/barebox.lds.h
 create mode 100644 arch/arm/mach-zynq/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-zynq/include/mach/debug_ll.h
 create mode 100644 arch/arm/mach-zynq/include/mach/devices.h
 create mode 100644 arch/arm/mach-zynq/include/mach/zynq-flash-header.h
 create mode 100644 arch/arm/mach-zynq/include/mach/zynq7000-regs.h
 create mode 100644 arch/arm/mach-zynq/zynq.c
 create mode 100644 drivers/serial/serial_cadence.c
 create mode 100644 scripts/zynq_checksum.c

-- 
1.8.2.rc2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-03-19  9:22 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-19  9:21 Steffen Trumtrar [this message]
2013-03-19  9:21 ` [PATCH v2 1/5] serial: Add driver for Cadence UART Steffen Trumtrar
2013-03-19 15:22   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19  9:21 ` [PATCH v2 2/5] ARM: zynq: Add new architecture zynq Steffen Trumtrar
2013-03-19 13:05   ` Josh Cartwright
2013-03-19 13:18   ` Josh Cartwright
2013-03-19 13:31     ` Steffen Trumtrar
2013-03-19 15:26   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19  9:21 ` [PATCH v2 3/5] ARM: zynq: add clk support for zynq7000 Steffen Trumtrar
2013-03-19 13:29   ` Josh Cartwright
2013-03-19 13:35     ` Steffen Trumtrar
2013-03-19 13:48       ` Josh Cartwright
2013-03-19  9:21 ` [PATCH v2 4/5] ARM: zynq: add zynq fsbl checksum script Steffen Trumtrar
2013-03-19  9:22 ` [PATCH v2 5/5] ARM: zynq: Add support for the Avnet Zedboard Steffen Trumtrar
2013-03-19 13:40   ` Josh Cartwright
2013-03-19 13:47     ` Steffen Trumtrar
2013-03-19 15:28   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-19 12:59 ` [PATCH v2 0/5] ARM: add support for Zynq Josh Cartwright
2013-03-19 13:57   ` Steffen Trumtrar
2013-03-19 15:08     ` Josh Cartwright

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363684920-3034-1-git-send-email-s.trumtrar@pengutronix.de \
    --to=s.trumtrar@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox