From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/2] of/net: Add net related of helpers
Date: Tue, 26 Mar 2013 10:15:15 +0100 [thread overview]
Message-ID: <1364289316-1998-1-git-send-email-s.hauer@pengutronix.de> (raw)
of_get_phy_mode to parse the phy mode from the devicetree and
of_get_mac_address to parse a MAC address from the devicetree.
Directly taken from the Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/of/Kconfig | 4 +++
drivers/of/Makefile | 1 +
drivers/of/of_net.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++
include/of_net.h | 14 ++++++++
4 files changed, 112 insertions(+)
create mode 100644 drivers/of/of_net.c
create mode 100644 include/of_net.h
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d304148..56762e4 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -8,3 +8,7 @@ config OFDEVICE
select OFTREE
select DTC
bool "Enable probing of devices from the devicetree"
+
+config OF_NET
+ depends on NET
+ def_bool y
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 9de1ca7..d16a946 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,3 +1,4 @@
obj-y += base.o fdt.o
obj-$(CONFIG_GPIOLIB) += gpio.o
obj-y += partition.o
+obj-y += of_net.o
diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
new file mode 100644
index 0000000..de93fbc
--- /dev/null
+++ b/drivers/of/of_net.c
@@ -0,0 +1,93 @@
+/*
+ * OF helpers for network devices.
+ *
+ * This file is released under the GPLv2
+ *
+ * Initially copied out of arch/powerpc/kernel/prom_parse.c
+ */
+#include <common.h>
+#include <net.h>
+#include <of_net.h>
+#include <linux/phy.h>
+
+/**
+ * It maps 'enum phy_interface_t' found in include/linux/phy.h
+ * into the device tree binding of 'phy-mode', so that Ethernet
+ * device driver can get phy interface from device tree.
+ */
+static const char *phy_modes[] = {
+ [PHY_INTERFACE_MODE_NA] = "",
+ [PHY_INTERFACE_MODE_MII] = "mii",
+ [PHY_INTERFACE_MODE_GMII] = "gmii",
+ [PHY_INTERFACE_MODE_SGMII] = "sgmii",
+ [PHY_INTERFACE_MODE_TBI] = "tbi",
+ [PHY_INTERFACE_MODE_RMII] = "rmii",
+ [PHY_INTERFACE_MODE_RGMII] = "rgmii",
+ [PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id",
+ [PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid",
+ [PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
+ [PHY_INTERFACE_MODE_RTBI] = "rtbi",
+ [PHY_INTERFACE_MODE_SMII] = "smii",
+};
+
+/**
+ * of_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy-mode',
+ * and return its index in phy_modes table, or errno in error case.
+ */
+int of_get_phy_mode(struct device_node *np)
+{
+ const char *pm;
+ int err, i;
+
+ err = of_property_read_string(np, "phy-mode", &pm);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(phy_modes); i++)
+ if (!strcmp(pm, phy_modes[i]))
+ return i;
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(of_get_phy_mode);
+
+/**
+ * Search the device tree for the best MAC address to use. 'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address. If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot. For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses. Some older U-Boots only initialized 'local-mac-address'. In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+ struct property *pp;
+
+ pp = of_find_property(np, "mac-address");
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "local-mac-address");
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "address");
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
diff --git a/include/of_net.h b/include/of_net.h
new file mode 100644
index 0000000..0f6ef20
--- /dev/null
+++ b/include/of_net.h
@@ -0,0 +1,14 @@
+/*
+ * OF helpers for network devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_NET_H
+#define __LINUX_OF_NET_H
+
+#include <of.h>
+int of_get_phy_mode(struct device_node *np);
+const void *of_get_mac_address(struct device_node *np);
+
+#endif /* __LINUX_OF_NET_H */
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-03-26 9:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 9:15 Sascha Hauer [this message]
2013-03-26 9:15 ` [PATCH 2/2] net: fec: probe phy_mode from devicetree Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364289316-1998-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox