From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] treewide: Fix typo seperate -> separate
Date: Sun, 7 Apr 2013 15:53:04 +0200 [thread overview]
Message-ID: <1365342784-25432-1-git-send-email-s.hauer@pengutronix.de> (raw)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/cpu/cpuinfo.c | 2 +-
common/globalvar.c | 4 ++--
common/hush.c | 2 +-
drivers/mci/imx.c | 2 +-
include/globalvar.h | 4 ++--
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/cpu/cpuinfo.c b/arch/arm/cpu/cpuinfo.c
index 3c8fe41..8aea4b4 100644
--- a/arch/arm/cpu/cpuinfo.c
+++ b/arch/arm/cpu/cpuinfo.c
@@ -155,7 +155,7 @@ static int do_cpuinfo(int argc, char *argv[])
implementer, architecture);
if (cache & (1 << 24)) {
- /* seperate I/D cache */
+ /* separate I/D cache */
printf("I-cache: ");
decode_cache(cache & 0xfff);
printf("D-cache: ");
diff --git a/common/globalvar.c b/common/globalvar.c
index a8aaa72..abcd881 100644
--- a/common/globalvar.c
+++ b/common/globalvar.c
@@ -22,7 +22,7 @@ int globalvar_add(const char *name,
* get a concatenated string of all globalvars beginning with 'match'.
* This adds whitespaces between the different globalvars
*/
-char *globalvar_get_match(const char *match, const char *seperator)
+char *globalvar_get_match(const char *match, const char *separator)
{
char *val = NULL;
struct param_d *param;
@@ -31,7 +31,7 @@ char *globalvar_get_match(const char *match, const char *seperator)
if (!strncmp(match, param->name, strlen(match))) {
const char *p = dev_get_param(&global_device, param->name);
if (val) {
- char *new = asprintf("%s%s%s", val, seperator, p);
+ char *new = asprintf("%s%s%s", val, separator, p);
free(val);
val = new;
} else {
diff --git a/common/hush.c b/common/hush.c
index b5e111a..a3235ba 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -1959,7 +1959,7 @@ BAREBOX_CMD_START(getopt)
BAREBOX_CMD_END
#endif
-BAREBOX_MAGICVAR(PATH, "colon seperated list of pathes to search for executables");
+BAREBOX_MAGICVAR(PATH, "colon separated list of pathes to search for executables");
#ifdef CONFIG_HUSH_FANCY_PROMPT
BAREBOX_MAGICVAR(PS1, "hush prompt");
#endif
diff --git a/drivers/mci/imx.c b/drivers/mci/imx.c
index 3d9bd0d..0e41be9 100644
--- a/drivers/mci/imx.c
+++ b/drivers/mci/imx.c
@@ -2,7 +2,7 @@
* This is a driver for the SDHC controller found in Freescale MX2/MX3
* SoCs. It is basically the same hardware as found on MX1 (imxmmc.c).
* Unlike the hardware found on MX1, this hardware just works and does
- * not need all the quirks found in imxmmc.c, hence the seperate driver.
+ * not need all the quirks found in imxmmc.c, hence the separate driver.
*
* Copyright (C) 2009 Ilya Yanok, <yanok@emcraft.com>
* Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
diff --git a/include/globalvar.h b/include/globalvar.h
index ddf885f..e3098bc 100644
--- a/include/globalvar.h
+++ b/include/globalvar.h
@@ -8,7 +8,7 @@ int globalvar_add(const char *name,
int (*set)(struct device_d *dev, struct param_d *p, const char *val),
const char *(*get)(struct device_d *, struct param_d *p),
unsigned long flags);
-char *globalvar_get_match(const char *match, const char *seperator);
+char *globalvar_get_match(const char *match, const char *separator);
void globalvar_set_match(const char *match, const char *val);
#else
static inline int globalvar_add_simple(const char *name)
@@ -24,7 +24,7 @@ static inline int globalvar_add(const char *name,
return 0;
}
-static inline char *globalvar_get_match(const char *match, const char *seperator)
+static inline char *globalvar_get_match(const char *match, const char *separator)
{
return NULL;
}
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2013-04-07 13:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365342784-25432-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox