From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH v4 13/13] tegra: add GPIO controller driver
Date: Wed, 10 Apr 2013 11:14:55 +0200 [thread overview]
Message-ID: <1365585295-2420-13-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1365585295-2420-1-git-send-email-dev@lynxeye.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
v4: remove Tegra 30 parts for now
---
arch/arm/Kconfig | 2 +
arch/arm/dts/tegra20.dtsi | 16 +++
arch/arm/mach-tegra/include/mach/gpio.h | 1 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-tegra.c | 214 ++++++++++++++++++++++++++++++++
6 files changed, 241 insertions(+)
create mode 100644 arch/arm/mach-tegra/include/mach/gpio.h
create mode 100644 drivers/gpio/gpio-tegra.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ed34d2c..0a4f821 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -142,6 +142,8 @@ config ARCH_TEGRA
select BUILTIN_DTB
select COMMON_CLK
select CLKDEV_LOOKUP
+ select GPIOLIB
+ select GPIO_TEGRA
select OFDEVICE
select OFTREE
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 91858ec..b7d1e27 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -18,6 +18,22 @@
#clock-cells = <1>;
};
+ gpio: gpio {
+ compatible = "nvidia,tegra20-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
new file mode 100644
index 0000000..306ab4c
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -0,0 +1 @@
+#include <asm-generic/gpio.h>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ea07028..d5e0ed1 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -36,6 +36,13 @@ config GPIO_PL061
config GPIO_STMPE
depends on MFD_STMPE
bool "STMPE GPIO Expander"
+
+config GPIO_TEGRA
+ bool "GPIO support for the Tegra SoCs"
+ depends on ARCH_TEGRA
+ help
+ Say yes here to include the driver for the GPIO controller found on the
+ Tegra line of SoCs.
endmenu
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 00acb68..5dcb6c8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
+obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
new file mode 100644
index 0000000..227a12f
--- /dev/null
+++ b/drivers/gpio/gpio-tegra.c
@@ -0,0 +1,214 @@
+/* *
+ * Copyright (C) 2010 Erik Gilling <konkers@google.com>, Google, Inc
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <gpio.h>
+#include <init.h>
+#include <io.h>
+#include <linux/err.h>
+
+#define GPIO_BANK(x) ((x) >> 5)
+#define GPIO_PORT(x) (((x) >> 3) & 0x3)
+#define GPIO_BIT(x) ((x) & 0x7)
+
+#define GPIO_REG(x) (GPIO_BANK(x) * config->bank_stride + \
+ GPIO_PORT(x) * 4)
+
+#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
+#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
+#define GPIO_OUT(x) (GPIO_REG(x) + 0x20)
+#define GPIO_IN(x) (GPIO_REG(x) + 0x30)
+#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50)
+
+#define GPIO_MSK_CNF(x) (GPIO_REG(x) + config->upper_offset + 0x00)
+#define GPIO_MSK_OE(x) (GPIO_REG(x) + config->upper_offset + 0x10)
+#define GPIO_MSK_OUT(x) (GPIO_REG(x) + config->upper_offset + 0X20)
+
+struct tegra_gpio_bank {
+ int bank;
+ int irq;
+};
+
+struct tegra_gpio_soc_config {
+ u32 bank_stride;
+ u32 upper_offset;
+ u32 bank_count;
+};
+
+static void __iomem *gpio_base;
+static struct tegra_gpio_soc_config *config;
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+ writel(val, gpio_base + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+ return readl(gpio_base + reg);
+}
+
+static int tegra_gpio_compose(int bank, int port, int bit)
+{
+ return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
+}
+
+static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
+{
+ u32 val;
+
+ val = 0x100 << GPIO_BIT(gpio);
+ if (value)
+ val |= 1 << GPIO_BIT(gpio);
+ tegra_gpio_writel(val, reg);
+}
+
+static void tegra_gpio_enable(int gpio)
+{
+ tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
+}
+
+static void tegra_gpio_disable(int gpio)
+{
+ tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
+}
+
+static int tegra_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return 0;
+}
+
+static void tegra_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ tegra_gpio_disable(offset);
+}
+
+static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
+}
+
+static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ /* If gpio is in output mode then read from the out value */
+ if ((tegra_gpio_readl(GPIO_OE(offset)) >> GPIO_BIT(offset)) & 1) {
+ printf("GPIO output mode\n");
+ return (tegra_gpio_readl(GPIO_OUT(offset)) >>
+ GPIO_BIT(offset)) & 0x1;
+ }
+
+ printf("GPIO input mode\n");
+ return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+}
+
+static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
+ tegra_gpio_enable(offset);
+ return 0;
+}
+
+static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ tegra_gpio_set(chip, offset, value);
+ tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
+ tegra_gpio_enable(offset);
+ return 0;
+}
+
+static struct gpio_ops tegra_gpio_ops = {
+ .request = tegra_gpio_request,
+ .free = tegra_gpio_free,
+ .direction_input = tegra_gpio_direction_input,
+ .direction_output = tegra_gpio_direction_output,
+ .get = tegra_gpio_get,
+ .set = tegra_gpio_set,
+};
+
+static struct gpio_chip tegra_gpio_chip = {
+ .ops = &tegra_gpio_ops,
+ .base = 0,
+};
+
+static int tegra_gpio_probe(struct device_d *dev)
+{
+ int i, j, ret;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&config);
+ if (ret) {
+ dev_err(dev, "dev_get_drvdata failed: %d\n", ret);
+ return ret;
+ }
+
+ gpio_base = dev_request_mem_region(dev, 0);
+ if (!gpio_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < config->bank_count; i++) {
+ for (j = 0; j < 4; j++) {
+ int gpio = tegra_gpio_compose(i, j, 0);
+ tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
+ }
+ }
+
+ tegra_gpio_chip.ngpio = config->bank_count * 32;
+ tegra_gpio_chip.dev = dev;
+
+ gpiochip_add(&tegra_gpio_chip);
+
+ return 0;
+}
+
+static struct tegra_gpio_soc_config tegra20_gpio_config = {
+ .bank_stride = 0x80,
+ .upper_offset = 0x800,
+ .bank_count = 7,
+};
+
+static struct platform_device_id tegra_gpio_ids[] = {
+ {
+ .name = "tegra20-gpio",
+ .driver_data = (unsigned long)&tegra20_gpio_config,
+ }, {
+ /* sentinel */
+ },
+};
+
+static __maybe_unused struct of_device_id tegra_gpio_dt_ids[] = {
+ {
+ .compatible = "nvidia,tegra20-gpio",
+ .data = (unsigned long)&tegra20_gpio_config
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d tegra_gpio_driver = {
+ .name = "tegra-gpio",
+ .id_table = tegra_gpio_ids,
+ .of_compatible = DRV_OF_COMPAT(tegra_gpio_dt_ids),
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
+coredevice_initcall(tegra_gpio_init);
--
1.8.1.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-04-10 9:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-10 9:14 [PATCH v4 01/13] tegra: pull in iomap.h from the Linux kernel Lucas Stach
2013-04-10 9:14 ` [PATCH v4 02/13] tegra: switch to proper CPU type Lucas Stach
2013-04-10 9:14 ` [PATCH v4 03/13] tegra: unify spelling in Kconfig with Linux kernel Lucas Stach
2013-04-10 9:14 ` [PATCH v4 04/13] tegra: introduce Tegra 20 SoC type Lucas Stach
2013-04-10 9:14 ` [PATCH v4 05/13] tegra: move default textbase Lucas Stach
2013-04-10 9:14 ` [PATCH v4 06/13] tegra: switch to DT only Lucas Stach
2013-04-10 9:14 ` [PATCH v4 07/13] tegra: add driver for the clock and reset module Lucas Stach
2013-04-10 9:14 ` [PATCH v4 08/13] tegra: add T20 timer driver Lucas Stach
2013-04-10 9:14 ` [PATCH v4 09/13] tegra: add T20 power management controller driver Lucas Stach
2013-04-10 9:14 ` [PATCH v4 10/13] tegra: add common lowlevel startup Lucas Stach
2013-04-10 9:14 ` [PATCH v4 11/13] tegra: add generic debug UART support Lucas Stach
2013-04-10 20:52 ` antonynpavlov
2013-04-10 9:14 ` [PATCH v4 12/13] tegra: add generic meminit Lucas Stach
2013-04-10 9:14 ` Lucas Stach [this message]
2013-04-10 20:46 ` [PATCH v4 13/13] tegra: add GPIO controller driver antonynpavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365585295-2420-13-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox