* [PATCH] am33xx: add defines for GPIOs
@ 2013-04-17 17:12 Jan Luebbe
2013-04-18 6:25 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Jan Luebbe @ 2013-04-17 17:12 UTC (permalink / raw)
To: barebox
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
arch/arm/mach-omap/include/mach/am33xx-clock.h | 2 ++
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
index 39c107f..cbee641 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
@@ -139,7 +139,9 @@
#define CM_PER_CPGMAC0_CLKCTRL (CM_PER + 0x14) /* Ethernet */
#define CM_PER_CPSW_CLKSTCTRL (CM_PER + 0x144)/* Ethernet */
#define CM_PER_OCMCRAM_CLKCTRL (CM_PER + 0x2C) /* OCMC RAM */
+#define CM_PER_GPIO1_CLKCTRL (CM_PER + 0xAC) /* GPIO1 */
#define CM_PER_GPIO2_CLKCTRL (CM_PER + 0xB0) /* GPIO2 */
+#define CM_PER_GPIO3_CLKCTRL (CM_PER + 0xB4) /* GPIO3 */
#define CM_PER_UART3_CLKCTRL (CM_PER + 0x74) /* UART3 */
#define CM_PER_I2C1_CLKCTRL (CM_PER + 0x48) /* I2C1 */
#define CM_PER_I2C2_CLKCTRL (CM_PER + 0x44) /* I2C2 */
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index e69d345..9edf4ca 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -29,6 +29,12 @@
#define AM33XX_UART1_BASE (AM33XX_L4_PER_BASE + 0x22000)
#define AM33XX_UART2_BASE (AM33XX_L4_PER_BASE + 0x24000)
+/* GPIO */
+#define AM33XX_GPIO0_BASE (AM33XX_L4_WKUP_BASE + 0x207000 + 0x100)
+#define AM33XX_GPIO1_BASE (AM33XX_L4_PER_BASE + 0x4C000 + 0x100)
+#define AM33XX_GPIO2_BASE (AM33XX_L4_PER_BASE + 0x1AC000 + 0x100)
+#define AM33XX_GPIO3_BASE (AM33XX_L4_PER_BASE + 0x1AE000 + 0x100)
+
/* EMFI Registers */
#define AM33XX_EMFI0_BASE 0x4C000000
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] am33xx: add defines for GPIOs
2013-04-17 17:12 [PATCH] am33xx: add defines for GPIOs Jan Luebbe
@ 2013-04-18 6:25 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2013-04-18 6:25 UTC (permalink / raw)
To: Jan Luebbe; +Cc: barebox
On Wed, Apr 17, 2013 at 07:12:49PM +0200, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Applied, thanks
Sascha
> ---
> arch/arm/mach-omap/include/mach/am33xx-clock.h | 2 ++
> arch/arm/mach-omap/include/mach/am33xx-silicon.h | 6 ++++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/mach-omap/include/mach/am33xx-clock.h b/arch/arm/mach-omap/include/mach/am33xx-clock.h
> index 39c107f..cbee641 100644
> --- a/arch/arm/mach-omap/include/mach/am33xx-clock.h
> +++ b/arch/arm/mach-omap/include/mach/am33xx-clock.h
> @@ -139,7 +139,9 @@
> #define CM_PER_CPGMAC0_CLKCTRL (CM_PER + 0x14) /* Ethernet */
> #define CM_PER_CPSW_CLKSTCTRL (CM_PER + 0x144)/* Ethernet */
> #define CM_PER_OCMCRAM_CLKCTRL (CM_PER + 0x2C) /* OCMC RAM */
> +#define CM_PER_GPIO1_CLKCTRL (CM_PER + 0xAC) /* GPIO1 */
> #define CM_PER_GPIO2_CLKCTRL (CM_PER + 0xB0) /* GPIO2 */
> +#define CM_PER_GPIO3_CLKCTRL (CM_PER + 0xB4) /* GPIO3 */
> #define CM_PER_UART3_CLKCTRL (CM_PER + 0x74) /* UART3 */
> #define CM_PER_I2C1_CLKCTRL (CM_PER + 0x48) /* I2C1 */
> #define CM_PER_I2C2_CLKCTRL (CM_PER + 0x44) /* I2C2 */
> diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
> index e69d345..9edf4ca 100644
> --- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
> +++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
> @@ -29,6 +29,12 @@
> #define AM33XX_UART1_BASE (AM33XX_L4_PER_BASE + 0x22000)
> #define AM33XX_UART2_BASE (AM33XX_L4_PER_BASE + 0x24000)
>
> +/* GPIO */
> +#define AM33XX_GPIO0_BASE (AM33XX_L4_WKUP_BASE + 0x207000 + 0x100)
> +#define AM33XX_GPIO1_BASE (AM33XX_L4_PER_BASE + 0x4C000 + 0x100)
> +#define AM33XX_GPIO2_BASE (AM33XX_L4_PER_BASE + 0x1AC000 + 0x100)
> +#define AM33XX_GPIO3_BASE (AM33XX_L4_PER_BASE + 0x1AE000 + 0x100)
> +
> /* EMFI Registers */
> #define AM33XX_EMFI0_BASE 0x4C000000
>
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-04-18 6:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-04-17 17:12 [PATCH] am33xx: add defines for GPIOs Jan Luebbe
2013-04-18 6:25 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox