* [PATCH 2/4] ARM: omap: Remove wrong OMAP_CLOCK_ALL symbol
2013-04-28 4:27 [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Alexander Shiyan
@ 2013-04-28 4:27 ` Alexander Shiyan
2013-04-28 4:27 ` [PATCH 3/4] ARM: netx: Remove references for missing boards Alexander Shiyan
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Alexander Shiyan @ 2013-04-28 4:27 UTC (permalink / raw)
To: barebox
OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement
and all other references to this symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/configs/phycard_a_l1_defconfig | 1 -
arch/arm/mach-omap/Kconfig | 2 --
arch/arm/mach-omap/omap3_clock.c | 6 ------
3 files changed, 9 deletions(-)
diff --git a/arch/arm/configs/phycard_a_l1_defconfig b/arch/arm/configs/phycard_a_l1_defconfig
index d90a333..fabaa2d 100644
--- a/arch/arm/configs/phycard_a_l1_defconfig
+++ b/arch/arm/configs/phycard_a_l1_defconfig
@@ -7,7 +7,6 @@ CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_BOARDINFO="Phytec phyCARD-A-L1"
CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_CLOCK_ALL=y
CONFIG_OMAP_CLOCK_SOURCE_S32K=y
CONFIG_OMAP3_CLOCK_CONFIG=y
CONFIG_OMAP3_COPY_CLOCK_SRAM=n
diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
index 42e5f4a..0913d0e 100644
--- a/arch/arm/mach-omap/Kconfig
+++ b/arch/arm/mach-omap/Kconfig
@@ -134,7 +134,6 @@ config MACH_BEAGLE
config MACH_BEAGLEBONE
bool "Texas Instrument's Beagle Bone"
- select OMAP_CLOCK_ALL
depends on ARCH_AM33XX
help
Say Y here if you are using Beagle Bone
@@ -179,7 +178,6 @@ config MACH_PCAAXL2
config MACH_PCM051
bool "Phytec phyCORE pcm051"
- select OMAP_CLOCK_ALL
select HAVE_DEFAULT_ENVIRONMENT_NEW
depends on ARCH_AM33XX
help
diff --git a/arch/arm/mach-omap/omap3_clock.c b/arch/arm/mach-omap/omap3_clock.c
index bcde48f..03aca49 100644
--- a/arch/arm/mach-omap/omap3_clock.c
+++ b/arch/arm/mach-omap/omap3_clock.c
@@ -652,12 +652,6 @@ void prcm_init(void)
/**
* @brief Enable the clks & power for perifs
*
- * GPT2 Sysclk, ICLK,FCLK, 32k Sync is enabled by default
- * Uses CONFIG_OMAP_CLOCK_UART to enable UART clocks
- * Uses CONFIG_OMAP_CLOCK_I2C to enable I2C clocks
- * Uses CONFIG_OMAP_CLOCK_ALL to enable All Clocks!
- * - Not a wise idea in most cases
- *
* @return void
*/
static void per_clocks_enable(void)
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 3/4] ARM: netx: Remove references for missing boards
2013-04-28 4:27 [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Alexander Shiyan
2013-04-28 4:27 ` [PATCH 2/4] ARM: omap: Remove wrong OMAP_CLOCK_ALL symbol Alexander Shiyan
@ 2013-04-28 4:27 ` Alexander Shiyan
2013-04-28 4:27 ` [PATCH 4/4] ARM: imx: Fix incorrect Kconfig symbols for some boards Alexander Shiyan
2013-04-30 6:21 ` [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Alexander Shiyan @ 2013-04-28 4:27 UTC (permalink / raw)
To: barebox
Barebox do not have support for MACH_NXDKN, MACH_NXHMIBB,
MACH_NXEB500HMI and MACH_NXHX boards, so remove these symbols.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-netx/Kconfig | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
index 8d8f49b..3c62d60 100644
--- a/arch/arm/mach-netx/Kconfig
+++ b/arch/arm/mach-netx/Kconfig
@@ -9,35 +9,19 @@ config BOARDINFO
config NETX_SDRAM_CTRL
hex
- default 0x010D0001 if MACH_NXDKN
default 0x010D0121 if MACH_NXDB500
- default 0x030D0111 if MACH_NXHMIBB
- default 0x010D0111 if MACH_NXEB500HMI
- default 0x030D0001 if MACH_NXHX
config NETX_SDRAM_TIMING_CTRL
hex
- default 0x03C12151 if MACH_NXDKN
default 0x03C13261 if MACH_NXDB500
- default 0x03C13251 if MACH_NXHMIBB
- default 0x03C13251 if MACH_NXEB500HMI
- default 0x03C23251 if MACH_NXHX
config NETX_MEM_CTRL
hex
- default 0x0103030F if MACH_NXDKN
default 0x0203030F if MACH_NXDB500
- default 0x0103030F if MACH_NXHMIBB
- default 0x0103030F if MACH_NXEB500HMI
- default 0x0103030F if MACH_NXHX
config NETX_COOKIE
hex
- default 16 if MACH_NXDKN
default 32 if MACH_NXDB500
- default 16 if MACH_NXHMIBB
- default 16 if MACH_NXEB500HMI
- default 16 if MACH_NXHX
choice
prompt "Netx Board Type"
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 4/4] ARM: imx: Fix incorrect Kconfig symbols for some boards
2013-04-28 4:27 [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Alexander Shiyan
2013-04-28 4:27 ` [PATCH 2/4] ARM: omap: Remove wrong OMAP_CLOCK_ALL symbol Alexander Shiyan
2013-04-28 4:27 ` [PATCH 3/4] ARM: netx: Remove references for missing boards Alexander Shiyan
@ 2013-04-28 4:27 ` Alexander Shiyan
2013-04-30 6:21 ` [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Alexander Shiyan @ 2013-04-28 4:27 UTC (permalink / raw)
To: barebox
This patch fix incorrect Kconfig symbols for MACH_FREESCALE_MX51_PDK,
MACH_FREESCALE_MX53_LOCO and MACH_FREESCALE_MX53_SMD.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-imx/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8ddec9d..eee6acd 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -17,9 +17,9 @@ config ARCH_TEXT_BASE
default 0x87f00000 if MACH_PCM043
default 0x08f80000 if MACH_SCB9328
default 0xa7e00000 if MACH_NESO
- default 0x97f00000 if MACH_MX51_PDK
- default 0x7ff00000 if MACH_MX53_LOCO
- default 0x7ff00000 if MACH_MX53_SMD
+ default 0x97f00000 if MACH_FREESCALE_MX51_PDK
+ default 0x7ff00000 if MACH_FREESCALE_MX53_LOCO
+ default 0x7ff00000 if MACH_FREESCALE_MX53_SMD
default 0x87f00000 if MACH_GUF_CUPID
default 0x93d00000 if MACH_TX25
default 0x7ff00000 if MACH_TQMA53
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol
2013-04-28 4:27 [PATCH 1/4] ata: Remove wrong DISK_DRIVE symbol Alexander Shiyan
` (2 preceding siblings ...)
2013-04-28 4:27 ` [PATCH 4/4] ARM: imx: Fix incorrect Kconfig symbols for some boards Alexander Shiyan
@ 2013-04-30 6:21 ` Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2013-04-30 6:21 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Sun, Apr 28, 2013 at 08:27:26AM +0400, Alexander Shiyan wrote:
> DISK_DRIVE is missing in Kconfig, so remove the "select" statement.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Applied all.
Thanks
Sascha
> ---
> drivers/ata/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 42f2065..9830cc0 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -35,7 +35,6 @@ config DISK_ATA
> config DISK_AHCI
> bool "AHCI support"
> select DISK_ATA
> - select DISK_DRIVE
>
> config DISK_AHCI_IMX
> depends on ARCH_IMX
> --
> 1.8.1.5
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread