* [PATCH RFC 0/2] Fix uInitrd handling
@ 2013-05-02 9:07 Uwe Kleine-König
2013-05-02 9:07 ` [PATCH RFC 1/2] bootm: Simplify initrd address handling Uwe Kleine-König
2013-05-02 9:07 ` [PATCH RFC 2/2] Don't honor initrd load address Uwe Kleine-König
0 siblings, 2 replies; 4+ messages in thread
From: Uwe Kleine-König @ 2013-05-02 9:07 UTC (permalink / raw)
To: barebox
Hello,
U-Boot doesn't honor the load address of uInitrd images but just places it
somewhere in RAM. So it's sensible to let barebox not being more strict
than U-Boot.
This makes it possible to boot a Debian system on an i.MX53 Loco board
with the setup prepared by flash-kernel. That uInitrd uses a load
address of 0x0 where there is nothing on i.MX53.
This series contains an additional cleanup. I'm not 100% sure it's ok
though. Is it intended that UIMAGE_SOME_ADDRESS being passed to bootm
not being used literally? Should I squash the cleanup in the other
commit? Also a similar simplification might be possible for the load
address of the uImage.
Sascha Hauer (1):
Don't honor initrd load address
Uwe Kleine-König (1):
bootm: Simplify initrd address handling
commands/bootm.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH RFC 1/2] bootm: Simplify initrd address handling
2013-05-02 9:07 [PATCH RFC 0/2] Fix uInitrd handling Uwe Kleine-König
@ 2013-05-02 9:07 ` Uwe Kleine-König
2013-05-03 4:24 ` Sascha Hauer
2013-05-02 9:07 ` [PATCH RFC 2/2] Don't honor initrd load address Uwe Kleine-König
1 sibling, 1 reply; 4+ messages in thread
From: Uwe Kleine-König @ 2013-05-02 9:07 UTC (permalink / raw)
To: barebox
data.initrd_address = UIMAGE_SOME_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
if (data.initrd_address == UIMAGE_SOME_ADDRESS)
data.initrd_address = UIMAGE_INVALID_ADDRESS;
can be simplified to:
data.initrd_address = UIMAGE_INVALID_ADDRESS;
...
if (-L was given to bootm)
data.initrd_address = address_provided_to_-L;
...
if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_INVALID_ADDRESS)
data.initrd_address = load_address_from_uInitrd;
...
The only change introduced by this simplification is for cases where the
user passes -L UIMAGE_SOME_ADDRESS or -L UIMAGE_INVALID_ADDRESS to
bootm. (-L UIMAGE_SOME_ADDRESS is now used literally instead of ignored
before. -L UIMAGE_INVALID_ADDRESS used to skip getting the
initrd-address from the uInitrd, now the uInitrd address is honored.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
commands/bootm.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/commands/bootm.c b/commands/bootm.c
index e5dfc6a..bb44776 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -127,7 +127,7 @@ static int bootm_open_initrd_uimage(struct image_data *data)
data->initrd = data->os;
}
- if (data->initrd_address == UIMAGE_SOME_ADDRESS)
+ if (data->initrd_address == UIMAGE_INVALID_ADDRESS)
data->initrd_address = data->initrd->header.ih_load;
return 0;
@@ -256,7 +256,7 @@ static int do_bootm(int argc, char *argv[])
memset(&data, 0, sizeof(struct image_data));
- data.initrd_address = UIMAGE_SOME_ADDRESS;
+ data.initrd_address = UIMAGE_INVALID_ADDRESS;
data.os_address = UIMAGE_SOME_ADDRESS;
data.verify = 0;
data.verbose = 0;
@@ -408,8 +408,6 @@ static int do_bootm(int argc, char *argv[])
#endif
if (data.os_address == UIMAGE_SOME_ADDRESS)
data.os_address = UIMAGE_INVALID_ADDRESS;
- if (data.initrd_address == UIMAGE_SOME_ADDRESS)
- data.initrd_address = UIMAGE_INVALID_ADDRESS;
handler = bootm_find_handler(os_type, &data);
if (!handler) {
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH RFC 2/2] Don't honor initrd load address
2013-05-02 9:07 [PATCH RFC 0/2] Fix uInitrd handling Uwe Kleine-König
2013-05-02 9:07 ` [PATCH RFC 1/2] bootm: Simplify initrd address handling Uwe Kleine-König
@ 2013-05-02 9:07 ` Uwe Kleine-König
1 sibling, 0 replies; 4+ messages in thread
From: Uwe Kleine-König @ 2013-05-02 9:07 UTC (permalink / raw)
To: barebox
From: Sascha Hauer <s.hauer@pengutronix.de>
U-Boot doesn't honor the load address specified in an initrd. Barebox
shouldn't be more strict here. This unbreaks booting an uInitrd
generated by Debian's flash-kernel that uses 0 as entry address where
there is nothing on the i.MX53 that was used.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
commands/bootm.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/commands/bootm.c b/commands/bootm.c
index bb44776..5dd1703 100644
--- a/commands/bootm.c
+++ b/commands/bootm.c
@@ -127,9 +127,6 @@ static int bootm_open_initrd_uimage(struct image_data *data)
data->initrd = data->os;
}
- if (data->initrd_address == UIMAGE_INVALID_ADDRESS)
- data->initrd_address = data->initrd->header.ih_load;
-
return 0;
}
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH RFC 1/2] bootm: Simplify initrd address handling
2013-05-02 9:07 ` [PATCH RFC 1/2] bootm: Simplify initrd address handling Uwe Kleine-König
@ 2013-05-03 4:24 ` Sascha Hauer
0 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2013-05-03 4:24 UTC (permalink / raw)
To: Uwe Kleine-König; +Cc: barebox
On Thu, May 02, 2013 at 11:07:11AM +0200, Uwe Kleine-König wrote:
> data.initrd_address = UIMAGE_SOME_ADDRESS;
> ...
> if (-L was given to bootm)
> data.initrd_address = address_provided_to_-L;
> ...
> if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_SOME_ADDRESS)
> data.initrd_address = load_address_from_uInitrd;
> ...
> if (data.initrd_address == UIMAGE_SOME_ADDRESS)
> data.initrd_address = UIMAGE_INVALID_ADDRESS;
>
> can be simplified to:
>
> data.initrd_address = UIMAGE_INVALID_ADDRESS;
> ...
> if (-L was given to bootm)
> data.initrd_address = address_provided_to_-L;
> ...
> if (initrd is provided as uInitrd && data.initrd_address == UIMAGE_INVALID_ADDRESS)
> data.initrd_address = load_address_from_uInitrd;
> ...
>
> The only change introduced by this simplification is for cases where the
> user passes -L UIMAGE_SOME_ADDRESS or -L UIMAGE_INVALID_ADDRESS to
> bootm. (-L UIMAGE_SOME_ADDRESS is now used literally instead of ignored
> before. -L UIMAGE_INVALID_ADDRESS used to skip getting the
> initrd-address from the uInitrd, now the uInitrd address is honored.)
And now I remember why I did that in the first place. It was to be able
to explicitly ignore a uInitrd load address from an image. Anyway, since
we ignore this address in any case with the next patch these patches are
ok.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-05-03 4:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-02 9:07 [PATCH RFC 0/2] Fix uInitrd handling Uwe Kleine-König
2013-05-02 9:07 ` [PATCH RFC 1/2] bootm: Simplify initrd address handling Uwe Kleine-König
2013-05-03 4:24 ` Sascha Hauer
2013-05-02 9:07 ` [PATCH RFC 2/2] Don't honor initrd load address Uwe Kleine-König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox