From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: barebox@lists.infradead.org
Cc: Lior Amsalem <alior@marvell.com>, Willy Tarreau <w@1wt.eu>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Subject: [PATCH 6/7] arm: add basic support for the Armada 370 Mirabox platform
Date: Fri, 3 May 2013 18:51:10 +0200 [thread overview]
Message-ID: <1367599871-28479-7-git-send-email-thomas.petazzoni@free-electrons.com> (raw)
In-Reply-To: <1367599871-28479-1-git-send-email-thomas.petazzoni@free-electrons.com>
The Mirabox is a platform manufactured by Globalscale, and based on
the Marvell Armada 370 SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
arch/arm/Makefile | 1 +
arch/arm/boards/globalscale-mirabox/Makefile | 2 ++
arch/arm/boards/globalscale-mirabox/config.h | 4 +++
.../globalscale-mirabox/globalscale-mirabox.c | 26 ++++++++++++++++++++
arch/arm/boards/globalscale-mirabox/kwbimage.cfg | 8 ++++++
arch/arm/boards/globalscale-mirabox/lowlevel.c | 26 ++++++++++++++++++++
arch/arm/configs/globalscale_mirabox_defconfig | 8 ++++++
arch/arm/mach-mvebu/Kconfig | 5 ++++
8 files changed, 80 insertions(+)
create mode 100644 arch/arm/boards/globalscale-mirabox/Makefile
create mode 100644 arch/arm/boards/globalscale-mirabox/config.h
create mode 100644 arch/arm/boards/globalscale-mirabox/globalscale-mirabox.c
create mode 100644 arch/arm/boards/globalscale-mirabox/kwbimage.cfg
create mode 100644 arch/arm/boards/globalscale-mirabox/lowlevel.c
create mode 100644 arch/arm/configs/globalscale_mirabox_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ad8b355..e6604b4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -101,6 +101,7 @@ board-$(CONFIG_MACH_EUKREA_CPUIMX51SD) := eukrea_cpuimx51
board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
board-$(CONFIG_MACH_GE863) := telit-evk-pro3
+board-$(CONFIG_MACH_GLOBALSCALE_MIRABOX) := globalscale-mirabox
board-$(CONFIG_MACH_HIGHBANK) := highbank
board-$(CONFIG_MACH_IMX21ADS) := imx21ads
board-$(CONFIG_MACH_IMX27ADS) := imx27ads
diff --git a/arch/arm/boards/globalscale-mirabox/Makefile b/arch/arm/boards/globalscale-mirabox/Makefile
new file mode 100644
index 0000000..bd5d47e
--- /dev/null
+++ b/arch/arm/boards/globalscale-mirabox/Makefile
@@ -0,0 +1,2 @@
+obj-y = globalscale-mirabox.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/globalscale-mirabox/config.h b/arch/arm/boards/globalscale-mirabox/config.h
new file mode 100644
index 0000000..ca15136
--- /dev/null
+++ b/arch/arm/boards/globalscale-mirabox/config.h
@@ -0,0 +1,4 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/globalscale-mirabox/globalscale-mirabox.c b/arch/arm/boards/globalscale-mirabox/globalscale-mirabox.c
new file mode 100644
index 0000000..b8f4bff
--- /dev/null
+++ b/arch/arm/boards/globalscale-mirabox/globalscale-mirabox.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <sizes.h>
+#include <mach/mvebu.h>
+
+static int globalscale_mirabox_console_init(void)
+{
+ return mvebu_add_uart0();
+}
+
+console_initcall(globalscale_mirabox_console_init);
diff --git a/arch/arm/boards/globalscale-mirabox/kwbimage.cfg b/arch/arm/boards/globalscale-mirabox/kwbimage.cfg
new file mode 100644
index 0000000..c83bf92
--- /dev/null
+++ b/arch/arm/boards/globalscale-mirabox/kwbimage.cfg
@@ -0,0 +1,8 @@
+VERSION 1
+BOOT_FROM uart
+DESTADDR 2000000
+EXECADDR 2000000
+NAND_BLKSZ 00020000
+NAND_BADBLK_LOCATION 01
+BINARY binary.0 0000005b 00000068
+PAYLOAD barebox.bin
diff --git a/arch/arm/boards/globalscale-mirabox/lowlevel.c b/arch/arm/boards/globalscale-mirabox/lowlevel.c
new file mode 100644
index 0000000..3ca202e
--- /dev/null
+++ b/arch/arm/boards/globalscale-mirabox/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/mvebu.h>
+
+void __naked barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+ mvebu_barebox_entry();
+}
diff --git a/arch/arm/configs/globalscale_mirabox_defconfig b/arch/arm/configs/globalscale_mirabox_defconfig
new file mode 100644
index 0000000..ed9d94d
--- /dev/null
+++ b/arch/arm/configs/globalscale_mirabox_defconfig
@@ -0,0 +1,8 @@
+CONFIG_ARCH_MVEBU=y
+CONFIG_AEABI=y
+CONFIG_DEBUG_LL=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_LOADS=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_CLK=y
+CONFIG_DRIVER_SERIAL_NS16550=y
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9196251..8489335 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -3,9 +3,11 @@ if ARCH_MVEBU
config ARCH_TEXT_BASE
hex
default 0x2000000 if MACH_PLATHOME_OPENBLOCKS_AX3
+ default 0x2000000 if MACH_GLOBALSCALE_MIRABOX
config BOARDINFO
default "PlatHome OpenBlocks AX3" if MACH_PLATHOME_OPENBLOCKS_AX3
+ default "Globalscale Mirabox" if MACH_GLOBALSCALE_MIRABOX
choice
prompt "Marvell EBU Processor"
@@ -25,6 +27,9 @@ if ARCH_ARMADA_370
choice
prompt "Armada 370 Board Type"
+config MACH_GLOBALSCALE_MIRABOX
+ bool "Globalscale Mirabox"
+
endchoice
endif # ARCH_ARMADA_370
--
1.7.9.5
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-05-03 16:52 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-03 16:51 [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC Thomas Petazzoni
2013-05-03 16:51 ` [PATCH 1/7] scripts: allow lines longer than 80 cols with printf() in checkpatch Thomas Petazzoni
2013-05-06 7:23 ` Sascha Hauer
2013-05-06 7:27 ` Thomas Petazzoni
2013-05-03 16:51 ` [PATCH 2/7] scripts: new kwbimage manipulation tool for Marvell SoC boot images Thomas Petazzoni
2013-05-04 19:51 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-04 20:32 ` Jason Cooper
2013-05-05 6:40 ` Sascha Hauer
2013-05-05 11:19 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-05 11:40 ` Willy Tarreau
2013-05-06 13:53 ` Thomas Petazzoni
2013-05-06 13:54 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 14:06 ` Thomas Petazzoni
2013-05-06 14:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 14:13 ` Thomas Petazzoni
2013-05-06 14:14 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 14:31 ` Willy Tarreau
2013-05-06 19:34 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 19:53 ` Willy Tarreau
2013-05-06 20:21 ` Thomas Petazzoni
2013-05-06 20:35 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 20:44 ` Thomas Petazzoni
2013-05-06 20:56 ` Sascha Hauer
2013-05-06 21:03 ` Thomas Petazzoni
2013-05-07 6:31 ` Sascha Hauer
2013-05-07 9:33 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-07 9:46 ` Willy Tarreau
2013-05-07 9:47 ` Sascha Hauer
2013-05-07 9:57 ` Thomas Petazzoni
2013-05-06 20:48 ` Sascha Hauer
2013-05-06 14:21 ` Jason Cooper
2013-05-06 19:39 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-07 6:44 ` Sascha Hauer
2013-05-06 19:41 ` Sascha Hauer
2013-05-06 19:16 ` Sascha Hauer
2013-05-06 20:22 ` Thomas Petazzoni
2013-05-07 23:30 ` Gregory CLEMENT
2013-05-03 16:51 ` [PATCH 3/7] scripts: add kwboot tool Thomas Petazzoni
2013-05-03 16:51 ` [PATCH 4/7] arm: initial support for Marvell Armada 370/XP SoCs Thomas Petazzoni
2013-05-06 14:09 ` Thomas Petazzoni
2013-05-06 14:07 ` Jean-Christophe PLAGNIOL-VILLARD
2013-05-06 14:30 ` Sascha Hauer
2013-05-06 14:34 ` Thomas Petazzoni
2013-05-06 14:46 ` Sascha Hauer
2013-05-06 14:48 ` Thomas Petazzoni
2013-05-03 16:51 ` [PATCH 5/7] arm: add basic support for Armada XP OpenBlocks AX3 platform Thomas Petazzoni
2013-05-05 6:59 ` Sascha Hauer
2013-05-03 16:51 ` Thomas Petazzoni [this message]
2013-05-03 16:51 ` [PATCH 7/7] arm: add basic support for the Armada XP GP platform Thomas Petazzoni
2013-05-04 17:15 ` [PATCH 0/7] Basic support for Marvell Armada 370/XP SoC Jason Cooper
2013-05-04 17:23 ` Re[2]: " Alexander Shiyan
2013-05-04 17:49 ` Thomas Petazzoni
2013-05-04 17:52 ` Re[2]: " Alexander Shiyan
2013-05-04 17:52 ` Thomas Petazzoni
2013-05-04 18:34 ` Jason Cooper
2013-05-05 6:33 ` Sascha Hauer
2013-05-06 13:54 ` Thomas Petazzoni
2013-05-06 19:28 ` Sascha Hauer
2013-05-06 20:32 ` Thomas Petazzoni
2013-05-07 23:28 ` Gregory CLEMENT
2013-05-07 23:46 ` Gregory CLEMENT
2013-05-08 10:46 ` Thomas Petazzoni
2013-05-08 21:02 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367599871-28479-7-git-send-email-thomas.petazzoni@free-electrons.com \
--to=thomas.petazzoni@free-electrons.com \
--cc=alior@marvell.com \
--cc=barebox@lists.infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox