From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 2/3] usb: i.MX chipidea: Add devicetree support
Date: Thu, 30 May 2013 12:52:47 +0200 [thread overview]
Message-ID: <1369911168-15654-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1369911168-15654-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/imx/chipidea-imx.c | 133 +++++++++++++++++++++++++++++++++--------
drivers/usb/imx/imx-usb-misc.c | 49 +++++++++++++++
drivers/usb/imx/imx-usb-phy.c | 11 +++-
3 files changed, 166 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index 1570f90..508dbd8 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -16,6 +16,7 @@
#include <init.h>
#include <io.h>
#include <driver.h>
+#include <usb/usb.h>
#include <usb/ehci.h>
#include <usb/chipidea-imx.h>
#include <usb/ulpi.h>
@@ -23,64 +24,135 @@
#define MXC_EHCI_PORTSC_MASK ((0xf << 28) | (1 << 25))
+struct imx_chipidea {
+ struct device_d *dev;
+ struct ehci_data data;
+ unsigned long flags;
+ enum imx_usb_mode mode;
+ int (*init)(int port);
+ int portno;
+};
+
static int imx_chipidea_port_init(void *drvdata)
{
- struct device_d *dev = drvdata;
- struct imxusb_platformdata *pdata = dev->platform_data;
+ struct imx_chipidea *ci = drvdata;
int ret;
- ret = imx_usbmisc_port_init(dev->id, pdata->flags);
+ ret = imx_usbmisc_port_init(ci->portno, ci->flags);
if (ret)
- dev_err(dev, "misc init failed: %s\n", strerror(-ret));
+ dev_err(ci->dev, "misc init failed: %s\n", strerror(-ret));
- if (pdata->init)
- pdata->init(dev->id);
+ if (ci->init)
+ ci->init(ci->portno);
return ret;
}
static int imx_chipidea_port_post_init(void *drvdata)
{
- struct device_d *dev = drvdata;
- struct imxusb_platformdata *pdata = dev->platform_data;
+ struct imx_chipidea *ci = drvdata;
int ret;
- ret = imx_usbmisc_port_post_init(dev->id, pdata->flags);
+ ret = imx_usbmisc_port_post_init(ci->portno, ci->flags);
if (ret)
- dev_err(dev, "post misc init failed: %s\n", strerror(-ret));
+ dev_err(ci->dev, "post misc init failed: %s\n", strerror(-ret));
return ret;
}
+static int imx_chipidea_probe_dt(struct imx_chipidea *ci)
+{
+ const void *out_args;
+ struct device_node *usbmisc_np;
+ enum usb_dr_mode mode;
+ enum usb_phy_interface phymode;
+
+ of_parse_phandles_with_args(ci->dev->device_node, "fsl,usbmisc",
+ "#index-cells", 0, &usbmisc_np, &out_args);
+
+ ci->portno = be32_to_cpup(out_args);
+
+ ci->flags = MXC_EHCI_MODE_UTMI_8BIT;
+
+ mode = of_usb_get_dr_mode(ci->dev->device_node, NULL);
+
+ switch (mode) {
+ case USB_DR_MODE_HOST:
+ default:
+ ci->mode = IMX_USB_MODE_HOST;
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ ci->mode = IMX_USB_MODE_DEVICE;
+ break;
+ }
+
+ phymode = of_usb_get_phy_mode(ci->dev->device_node, NULL);
+ switch (phymode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ ci->flags = MXC_EHCI_MODE_UTMI_8BIT;
+ break;
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ ci->flags = MXC_EHCI_MODE_UTMI_16_BIT;
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ ci->flags = MXC_EHCI_MODE_ULPI;
+ break;
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ ci->flags = MXC_EHCI_MODE_SERIAL;
+ break;
+ case USBPHY_INTERFACE_MODE_HSIC:
+ ci->flags = MXC_EHCI_MODE_HSIC;
+ break;
+ default:
+ dev_err(ci->dev, "no or invalid phy mode setting\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int imx_chipidea_probe(struct device_d *dev)
{
struct imxusb_platformdata *pdata = dev->platform_data;
int ret;
void __iomem *base;
- struct ehci_data data = {};
+ struct imx_chipidea *ci;
uint32_t portsc;
- if (!pdata) {
- dev_err(dev, "no pdata!\n");
- return -EINVAL;
+ ci = xzalloc(sizeof(*ci));
+ ci->dev = dev;
+
+ if (IS_ENABLED(CONFIG_OFDEVICE) && dev->device_node) {
+ ret = imx_chipidea_probe_dt(ci);
+ if (ret)
+ return ret;
+ } else {
+ if (!pdata) {
+ dev_err(dev, "no pdata!\n");
+ return -EINVAL;
+ }
+ ci->portno = dev->id;
+ ci->flags = pdata->flags;
+ ci->init = pdata->init;
+ ci->mode = pdata->mode;
}
base = dev_request_mem_region(dev, 0);
if (!base)
return -ENODEV;
- data.init = imx_chipidea_port_init;
- data.post_init = imx_chipidea_port_post_init;
- data.drvdata = dev;
+ ci->data.init = imx_chipidea_port_init;
+ ci->data.post_init = imx_chipidea_port_post_init;
+ ci->data.drvdata = ci;
portsc = readl(base + 0x184);
portsc &= ~MXC_EHCI_PORTSC_MASK;
- portsc |= pdata->flags & MXC_EHCI_PORTSC_MASK;
+ portsc |= ci->flags & MXC_EHCI_PORTSC_MASK;
writel(portsc, base + 0x184);
- imx_chipidea_port_init(dev);
+ imx_chipidea_port_init(ci);
- if ((pdata->flags & MXC_EHCI_PORTSC_MASK) == MXC_EHCI_MODE_ULPI) {
+ if ((ci->flags & MXC_EHCI_PORTSC_MASK) == MXC_EHCI_MODE_ULPI) {
dev_dbg(dev, "using ULPI phy\n");
if (IS_ENABLED(CONFIG_USB_ULPI)) {
ret = ulpi_setup(base + 0x170, 1);
@@ -93,13 +165,13 @@ static int imx_chipidea_probe(struct device_d *dev)
return ret;
}
- data.hccr = base + 0x100;
- data.hcor = base + 0x140;
- data.flags = EHCI_HAS_TT;
+ ci->data.hccr = base + 0x100;
+ ci->data.hcor = base + 0x140;
+ ci->data.flags = EHCI_HAS_TT;
- if (pdata->mode == IMX_USB_MODE_HOST && IS_ENABLED(CONFIG_USB_EHCI)) {
- ret = ehci_register(dev, &data);
- } else if (pdata->mode == IMX_USB_MODE_DEVICE && IS_ENABLED(CONFIG_USB_GADGET_DRIVER_ARC)) {
+ if (ci->mode == IMX_USB_MODE_HOST && IS_ENABLED(CONFIG_USB_EHCI)) {
+ ret = ehci_register(dev, &ci->data);
+ } else if (ci->mode == IMX_USB_MODE_DEVICE && IS_ENABLED(CONFIG_USB_GADGET_DRIVER_ARC)) {
ret = ci_udc_register(dev, base);
} else {
dev_err(dev, "No supported role\n");
@@ -109,8 +181,17 @@ static int imx_chipidea_probe(struct device_d *dev)
return ret;
};
+static __maybe_unused struct of_device_id imx_chipidea_dt_ids[] = {
+ {
+ .compatible = "fsl,imx27-usb",
+ }, {
+ /* sentinel */
+ },
+};
+
static struct driver_d imx_chipidea_driver = {
.name = "imx-usb",
.probe = imx_chipidea_probe,
+ .of_compatible = DRV_OF_COMPAT(imx_chipidea_dt_ids),
};
device_platform_driver(imx_chipidea_driver);
diff --git a/drivers/usb/imx/imx-usb-misc.c b/drivers/usb/imx/imx-usb-misc.c
index 901ced4..2729684 100644
--- a/drivers/usb/imx/imx-usb-misc.c
+++ b/drivers/usb/imx/imx-usb-misc.c
@@ -463,6 +463,54 @@ static struct platform_device_id imx_usbmisc_ids[] = {
},
};
+static __maybe_unused struct of_device_id imx_usbmisc_dt_ids[] = {
+#ifdef CONFIG_ARCH_IMX25
+ {
+ .compatible = "fsl,imx25-usbmisc",
+ .data = (unsigned long)&mx25_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX27
+ {
+ .compatible = "fsl,imx27-usbmisc",
+ .data = (unsigned long)&mx27_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX31
+ {
+ .compatible = "fsl,imx31-usbmisc",
+ .data = (unsigned long)&mx31_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX35
+ {
+ .compatible = "fsl,imx35-usbmisc",
+ .data = (unsigned long)&mx35_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX51
+ {
+ .compatible = "fsl,imx51-usbmisc",
+ .data = (unsigned long)&mx5_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX53
+ {
+ .compatible = "fsl,imx53-usbmisc",
+ .data = (unsigned long)&mx5_data,
+ },
+#endif
+#ifdef CONFIG_ARCH_IMX6
+ {
+ .compatible = "fsl,imx6q-usbmisc",
+ .data = (unsigned long)&mx6_data,
+ },
+#endif
+ {
+ /* sentinel */
+ },
+};
+
static struct imx_usb_misc_data *imxusbmisc_data;
static void __iomem *usbmisc_base;
@@ -510,6 +558,7 @@ static struct driver_d imx_usbmisc_driver = {
.name = "imx-usbmisc",
.probe = imx_usbmisc_probe,
.id_table = imx_usbmisc_ids,
+ .of_compatible = DRV_OF_COMPAT(imx_usbmisc_dt_ids),
};
static int imx_usbmisc_init(void)
diff --git a/drivers/usb/imx/imx-usb-phy.c b/drivers/usb/imx/imx-usb-phy.c
index ce9c93f..776bfe5 100644
--- a/drivers/usb/imx/imx-usb-phy.c
+++ b/drivers/usb/imx/imx-usb-phy.c
@@ -93,13 +93,22 @@ err_free:
return ret;
};
+static __maybe_unused struct of_device_id imx_usbphy_dt_ids[] = {
+ {
+ .compatible = "fsl,imx23-usbphy",
+ }, {
+ /* sentinel */
+ },
+};
+
static struct driver_d imx_usbphy_driver = {
.name = "imx-usb-phy",
.probe = imx_usbphy_probe,
+ .of_compatible = DRV_OF_COMPAT(imx_usbphy_dt_ids),
};
static int imx_usbphy_init(void)
{
return platform_driver_register(&imx_usbphy_driver);
}
-coredevice_initcall(imx_usbphy_init);
+fs_initcall(imx_usbphy_init);
--
1.8.2.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-05-30 10:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 10:52 [PATCH] Add devicetree support to i.MX chipidea driver Sascha Hauer
2013-05-30 10:52 ` [PATCH 1/3] usb: Add devicetree helpers Sascha Hauer
2013-05-30 10:52 ` Sascha Hauer [this message]
2013-05-30 10:52 ` [PATCH 3/3] usb: i.MX chipidea: Add overcurrent disable flag for i.MX6 Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369911168-15654-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox