* [PATCH v3 1/3] MIPS: add Atheros ar531x family support
2013-05-30 18:18 [PATCH v3 0/3] work on atheros ar2313 Oleksij Rempel
@ 2013-05-30 18:18 ` Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 2/3] net: add ar231x-eth support Oleksij Rempel
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Oleksij Rempel @ 2013-05-30 18:18 UTC (permalink / raw)
To: barebox
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/mips/Kconfig | 9 +
arch/mips/Makefile | 2 +
arch/mips/mach-ar231x/Kconfig | 7 +
arch/mips/mach-ar231x/Makefile | 3 +
arch/mips/mach-ar231x/ar231x.c | 195 +++++++++++++
arch/mips/mach-ar231x/ar231x_reset.c | 73 +++++
arch/mips/mach-ar231x/board.c | 188 +++++++++++++
arch/mips/mach-ar231x/include/mach/ar2312_regs.h | 302 +++++++++++++++++++++
.../mach-ar231x/include/mach/ar231x_platform.h | 104 +++++++
9 files changed, 883 insertions(+)
create mode 100644 arch/mips/mach-ar231x/Kconfig
create mode 100644 arch/mips/mach-ar231x/Makefile
create mode 100644 arch/mips/mach-ar231x/ar231x.c
create mode 100644 arch/mips/mach-ar231x/ar231x_reset.c
create mode 100644 arch/mips/mach-ar231x/board.c
create mode 100644 arch/mips/mach-ar231x/include/mach/ar2312_regs.h
create mode 100644 arch/mips/mach-ar231x/include/mach/ar231x_platform.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d58b804..aee9671 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -45,6 +45,14 @@ config MACH_MIPS_MALTA
select SYS_SUPPORTS_BIG_ENDIAN
select HAS_DEBUG_LL
+config MACH_MIPS_AR231X
+ bool "Atheros ar231x-based boards"
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select CSRC_R4K_LIB
+ select DRIVER_SERIAL_NS16550
+
config MACH_MIPS_BCM47XX
bool "Broadcom BCM47xx-based boards"
select CSRC_R4K_LIB
@@ -64,6 +72,7 @@ config MACH_MIPS_XBURST
endchoice
source arch/mips/mach-malta/Kconfig
+source arch/mips/mach-ar231x/Kconfig
source arch/mips/mach-bcm47xx/Kconfig
source arch/mips/mach-xburst/Kconfig
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index c038933..135259f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -72,6 +72,8 @@ LDFLAGS_barebox += -nostdlib
machine-$(CONFIG_MACH_MIPS_MALTA) := malta
board-$(CONFIG_BOARD_QEMU_MALTA) := qemu-malta
+machine-$(CONFIG_MACH_MIPS_AR231X) := ar231x
+
machine-$(CONFIG_MACH_MIPS_BCM47XX) := bcm47xx
board-$(CONFIG_BOARD_DLINK_DIR320) := dlink-dir-320
diff --git a/arch/mips/mach-ar231x/Kconfig b/arch/mips/mach-ar231x/Kconfig
new file mode 100644
index 0000000..7694fe2
--- /dev/null
+++ b/arch/mips/mach-ar231x/Kconfig
@@ -0,0 +1,7 @@
+if MACH_MIPS_AR231X
+
+config ARCH_TEXT_BASE
+ hex
+ default 0xa0800000
+
+endif
diff --git a/arch/mips/mach-ar231x/Makefile b/arch/mips/mach-ar231x/Makefile
new file mode 100644
index 0000000..eba8e81
--- /dev/null
+++ b/arch/mips/mach-ar231x/Makefile
@@ -0,0 +1,3 @@
+obj-y += ar231x.o
+obj-y += board.o
+obj-y += ar231x_reset.o
diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
new file mode 100644
index 0000000..ca912bf
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x.c
@@ -0,0 +1,195 @@
+/*
+ * Based on Linux driver:
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <ns16550.h>
+#include <mach/ar231x_platform.h>
+#include <mach/ar2312_regs.h>
+
+struct ar231x_board_data ar231x_board;
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
+
+static unsigned int
+ar2312_cpu_frequency(void)
+{
+ unsigned int predivide_mask, predivide_shift;
+ unsigned int multiplier_mask, multiplier_shift;
+ unsigned int clock_ctl1, pre_divide_select, pre_divisor, multiplier;
+ unsigned int doubler_mask;
+ u32 devid;
+
+ devid = __raw_readl((char *)KSEG1ADDR(AR2312_REV));
+ devid &= AR2312_REV_MAJ;
+ devid >>= AR2312_REV_MAJ_S;
+ if (devid == AR2312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR2312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+ * sysFreq = cpuFreq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cntFreq = cpuFreq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpuFreq = 200MHz
+ * sysFreq = 50MHz
+ * cntFreq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clock_ctl1 = __raw_readl((char *)KSEG1ADDR(AR2312_CLOCKCTL1));
+ pre_divide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
+ pre_divisor = CLOCKCTL1_PREDIVIDE_TABLE[pre_divide_select];
+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clock_ctl1 & doubler_mask)
+ multiplier = multiplier << 1;
+
+ return (40000000 / pre_divisor) * multiplier;
+}
+
+static unsigned int
+ar2312_sys_frequency(void)
+{
+ return ar2312_cpu_frequency() / 4;
+}
+
+/*
+ * shutdown watchdog
+ */
+static int watchdog_init(void)
+{
+ pr_debug("Disable watchdog.\n");
+ __raw_writeb(AR2312_WD_CTRL_IGNORE_EXPIRATION,
+ (char *)KSEG1ADDR(AR2312_WD_CTRL));
+ return 0;
+}
+
+static void flash_init(void)
+{
+ u32 ctl, old_ctl;
+
+ /* Configure flash bank 0.
+ * Assume 8M maximum window size on this SoC.
+ * Flash will be aliased if it's smaller
+ */
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL0));
+ ctl = FLASHCTL_E | FLASHCTL_AC_8M | FLASHCTL_RBLE |
+ (0x01 << FLASHCTL_IDCY_S) |
+ (0x07 << FLASHCTL_WST1_S) |
+ (0x07 << FLASHCTL_WST2_S) | (old_ctl & FLASHCTL_MW);
+
+ __raw_writel(ctl, (char *)KSEG1ADDR(AR2312_FLASHCTL0));
+ /* Disable other flash banks */
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL1));
+ __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+ (char *)KSEG1ADDR(AR2312_FLASHCTL1));
+
+ old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL2));
+ __raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+ (char *)KSEG1ADDR(AR2312_FLASHCTL2));
+
+ /* We need to find atheros config. MAC address is there. */
+ ar231x_find_config((char *)KSEG1ADDR(AR2312_FLASH +
+ AR2312_MAX_FLASH_SIZE));
+}
+
+static int ether_init(void)
+{
+ static struct resource res[2];
+ struct ar231x_eth_platform_data *eth = &ar231x_board.eth_pdata;
+
+ /* Base ETH registers */
+ res[0].start = KSEG1ADDR(AR2312_ENET1);
+ res[0].end = res[0].start + 0x100000 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ /* Base PHY registers */
+ res[1].start = KSEG1ADDR(AR2312_ENET0);
+ res[1].end = res[1].start + 0x100000 - 1;
+ res[1].flags = IORESOURCE_MEM;
+
+ /* MAC address located in atheros config on flash. */
+ eth->mac = ar231x_board.config->enet0_mac;
+
+ eth->reset_mac = AR2312_RESET_ENET0 | AR2312_RESET_ENET1;
+ eth->reset_phy = AR2312_RESET_EPHY0 | AR2312_RESET_EPHY1;
+
+ eth->reset_bit = ar231x_reset_bit;
+
+ /* FIXME: base_reset should be replaced with reset driver */
+ eth->base_reset = KSEG1ADDR(AR2312_RESET);
+
+ add_generic_device_res("ar231x_eth", DEVICE_ID_DYNAMIC, res, 2, eth);
+ return 0;
+}
+
+static int platform_init(void)
+{
+ add_generic_device("ar231x_reset", DEVICE_ID_SINGLE, NULL,
+ KSEG1ADDR(AR2312_RESET), 0x4,
+ IORESOURCE_MEM, NULL);
+ watchdog_init();
+ flash_init();
+ ether_init();
+ return 0;
+}
+late_initcall(platform_init);
+
+static struct NS16550_plat serial_plat = {
+ .shift = AR2312_UART_SHIFT,
+};
+
+static int ar2312_console_init(void)
+{
+ u32 reset;
+
+ /* reset UART0 */
+ reset = __raw_readl((char *)KSEG1ADDR(AR2312_RESET));
+ reset = ((reset & ~AR2312_RESET_APB) | AR2312_RESET_UART0);
+ __raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+ reset &= ~AR2312_RESET_UART0;
+ __raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+ /* Register the serial port */
+ serial_plat.clock = ar2312_sys_frequency();
+ add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
+ 8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
+ return 0;
+}
+console_initcall(ar2312_console_init);
diff --git a/arch/mips/mach-ar231x/ar231x_reset.c b/arch/mips/mach-ar231x/ar231x_reset.c
new file mode 100644
index 0000000..5ececb5
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x_reset.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+
+static void __iomem *reset_base;
+
+void __noreturn reset_cpu(ulong addr)
+{
+ printf("reseting cpu\n");
+ __raw_writel(0x10000,
+ (char *)KSEG1ADDR(AR2312_WD_TIMER));
+ __raw_writel(AR2312_WD_CTRL_RESET,
+ (char *)KSEG1ADDR(AR2312_WD_CTRL));
+ unreachable();
+}
+EXPORT_SYMBOL(reset_cpu);
+
+static u32 ar231x_reset_readl(void)
+{
+ return __raw_readl(reset_base);
+}
+
+static void ar231x_reset_writel(u32 val)
+{
+ __raw_writel(val, reset_base);
+}
+
+void ar231x_reset_bit(u32 val, enum reset_state state)
+{
+ u32 tmp;
+
+ tmp = ar231x_reset_readl();
+
+ if (state == REMOVE)
+ ar231x_reset_writel(tmp & ~val);
+ else
+ ar231x_reset_writel(tmp | val);
+}
+EXPORT_SYMBOL(ar231x_reset_bit);
+
+static int ar231x_reset_probe(struct device_d *dev)
+{
+ reset_base = dev_request_mem_region(dev, 0);
+ if (!reset_base) {
+ dev_err(dev, "could not get memory region\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct driver_d ar231x_reset_driver = {
+ .probe = ar231x_reset_probe,
+ .name = "ar231x_reset",
+};
+
+static int ar231x_reset_init(void)
+{
+ return platform_driver_register(&ar231x_reset_driver);
+}
+coredevice_initcall(ar231x_reset_init);
diff --git a/arch/mips/mach-ar231x/board.c b/arch/mips/mach-ar231x/board.c
new file mode 100644
index 0000000..f1b876f
--- /dev/null
+++ b/arch/mips/mach-ar231x/board.c
@@ -0,0 +1,188 @@
+/*
+ * Based on Linux driver:
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#include <common.h>
+#include <io.h>
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+#include <linux/stddef.h>
+#include <net.h>
+
+#define HDR_SIZE 6
+
+#define TAB_1 "\t"
+#define TAB_2 "\t\t"
+
+extern struct ar231x_board_data ar231x_board;
+
+static void
+ar231x_print_mac(unsigned char *mac)
+{
+ int i;
+ for (i = 0; i < 5; i++)
+ printf("%02x:", mac[i]);
+ printf("%02x\n", mac[5]);
+}
+
+#ifdef DEBUG_BOARD
+static void
+ar231x_print_board_config(struct ar231x_board_config *config)
+{
+ printf("board config:\n");
+ printf(TAB_1 "chsum:" TAB_2 "%04x\n", config->cksum);
+ printf(TAB_1 "rev:" TAB_2 "%04x\n", config->rev);
+ printf(TAB_1 "name:" TAB_2 "%s\n", config->board_name);
+ printf(TAB_1 "maj:" TAB_2 "%04x\n", config->major);
+ printf(TAB_1 "min:" TAB_2 "%04x\n", config->minor);
+ printf(TAB_1 "board flags:" TAB_1 "%08x\n", config->flags);
+
+ if (config->flags & BD_ENET0)
+ printf(TAB_2 "ENET0 is stuffed\n");
+ if (config->flags & BD_ENET1)
+ printf(TAB_2 "ENET1 is stuffed\n");
+ if (config->flags & BD_UART1)
+ printf(TAB_2 "UART1 is stuffed\n");
+ if (config->flags & BD_UART0)
+ printf(TAB_2 "UART0 is stuffed (dma)\n");
+ if (config->flags & BD_RSTFACTORY)
+ printf(TAB_2 "Reset factory defaults stuffed\n");
+ if (config->flags & BD_SYSLED)
+ printf(TAB_2 "System LED stuffed\n");
+ if (config->flags & BD_EXTUARTCLK)
+ printf(TAB_2 "External UART clock\n");
+ if (config->flags & BD_CPUFREQ)
+ printf(TAB_2 "cpu freq is valid in nvram\n");
+ if (config->flags & BD_SYSFREQ)
+ printf(TAB_2 "sys freq is set in nvram\n");
+ if (config->flags & BD_WLAN0)
+ printf(TAB_2 "Enable WLAN0\n");
+ if (config->flags & BD_MEMCAP)
+ printf(TAB_2 "CAP SDRAM @ memCap for testing\n");
+ if (config->flags & BD_DISWATCHDOG)
+ printf(TAB_2 "disable system watchdog\n");
+ if (config->flags & BD_WLAN1)
+ printf(TAB_2 "Enable WLAN1 (ar5212)\n");
+ if (config->flags & BD_ISCASPER)
+ printf(TAB_2 "FLAG for AR2312\n");
+ if (config->flags & BD_WLAN0_2G_EN)
+ printf(TAB_2 "FLAG for radio0_2G\n");
+ if (config->flags & BD_WLAN0_5G_EN)
+ printf(TAB_2 "FLAG for radio0_5G\n");
+ if (config->flags & BD_WLAN1_2G_EN)
+ printf(TAB_2 "FLAG for radio1_2G\n");
+ if (config->flags & BD_WLAN1_5G_EN)
+ printf(TAB_2 "FLAG for radio1_5G\n");
+
+ printf(TAB_1 "ResetConf GPIO pin:" TAB_1 "%04x\n",
+ config->reset_config_gpio);
+ printf(TAB_1 "Sys LED GPIO pin:" TAB_1 "%04x\n", config->sys_led_gpio);
+ printf(TAB_1 "CPU Freq:" TAB_2 "%u\n", config->cpu_freq);
+ printf(TAB_1 "Sys Freq:" TAB_2 "%u\n", config->sys_freq);
+ printf(TAB_1 "Calculated Freq:" TAB_1 "%u\n", config->cnt_freq);
+
+ printf(TAB_1 "wlan0 mac:" TAB_2);
+ ar231x_print_mac(config->wlan0_mac);
+ printf(TAB_1 "wlan1 mac:" TAB_2);
+ ar231x_print_mac(config->wlan1_mac);
+ printf(TAB_1 "eth0 mac:" TAB_2);
+ ar231x_print_mac(config->enet0_mac);
+ printf(TAB_1 "eth1 mac:" TAB_2);
+ ar231x_print_mac(config->enet1_mac);
+
+ printf(TAB_1 "Pseudo PCIID:" TAB_2 "%04x\n", config->pci_id);
+ printf(TAB_1 "Mem capacity:" TAB_2 "%u\n", config->mem_cap);
+}
+#endif
+
+static u16
+ar231x_cksum16(u8 *data, int size)
+{
+ int i;
+ u16 sum;
+
+ for (i = 0; i < size; i++)
+ sum += data[i];
+
+ return sum;
+}
+
+static void
+ar231x_check_mac(u8 *addr)
+{
+ if (!is_valid_ether_addr(addr)) {
+ pr_warn("config: no valid mac was found. "
+ "Generating random mac: ");
+ random_ether_addr(addr);
+ ar231x_print_mac(addr);
+ }
+}
+
+static u8 *
+ar231x_find_board_config(u8 *flash_limit)
+{
+ u8 *addr;
+ int found = 0;
+
+ for (addr = flash_limit - 0x1000;
+ addr >= flash_limit - 0x30000;
+ addr -= 0x1000) {
+
+ if (*((u32 *)addr) == AR231X_BD_MAGIC) {
+ found = 1;
+ pr_debug("config at %x\n", addr);
+ break;
+ }
+ }
+
+ if (!found)
+ addr = NULL;
+
+ return addr;
+}
+
+void
+ar231x_find_config(u8 *flash_limit)
+{
+ struct ar231x_board_config *config;
+ u8 *bcfg, bsize;
+ u8 brocken;
+
+ bcfg = ar231x_find_board_config(flash_limit);
+
+ bsize = sizeof(struct ar231x_board_config);
+ config = xzalloc(bsize);
+ ar231x_board.config = config;
+
+ if (bcfg) {
+ u16 cksum;
+ /* Copy the board and radio data to RAM.
+ * If flash will go to CFI mode, we won't
+ * be able to read to from mapped memory area */
+ memcpy(config, bcfg, bsize);
+ cksum = 0xca + ar231x_cksum16((unsigned char *)config + HDR_SIZE,
+ sizeof(struct ar231x_board_config) - HDR_SIZE);
+ if (cksum != config->cksum) {
+ pr_err("config: checksum is invalid: %04x != %04x\n",
+ cksum, config->cksum);
+ brocken = 1;
+ }
+ /* ar231x_print_board_config(config); */
+ }
+
+ /* We do not care about wlans here */
+ ar231x_check_mac(config->enet0_mac);
+ ar231x_check_mac(config->enet1_mac);
+}
diff --git a/arch/mips/mach-ar231x/include/mach/ar2312_regs.h b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
new file mode 100644
index 0000000..7ac1b09
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
@@ -0,0 +1,302 @@
+/*
+ * Based on Linux driver:
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AR2312_H
+#define AR2312_H
+
+#include <asm/addrspace.h>
+
+/* Address Map */
+#define AR2312_SDRAM0 0x00000000
+#define AR2312_SDRAM1 0x08000000
+#define AR2312_WLAN0 0x18000000
+#define AR2312_WLAN1 0x18500000
+#define AR2312_ENET0 0x18100000
+#define AR2312_ENET1 0x18200000
+#define AR2312_SDRAMCTL 0x18300000
+#define AR2312_FLASHCTL 0x18400000
+#define AR2312_APBBASE 0x1c000000
+#define AR2312_FLASH 0x1e000000
+
+#define AR2312_CPU_CLOCK_RATE 180000000
+/* Used by romSizeMemory to set SDRAM Memory Refresh */
+#define AR2312_SDRAM_CLOCK_RATE (AR2312_CPU_CLOCK_RATE / 2)
+/*
+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
+ * 15.625us * SDRAM_CLOCK_RATE (in MHZ)
+ */
+#define DESIRED_MEMORY_REFRESH_NSECS 15625
+#define AR2312_SDRAM_MEMORY_REFRESH_VALUE \
+ ((DESIRED_MEMORY_REFRESH_NSECS * AR2312_SDRAM_CLOCK_RATE/1000000) / 1000)
+
+/*
+ * APB Address Map
+ */
+#define AR2312_UART0 (AR2312_APBBASE + 0x0003) /* high speed uart */
+#define AR2312_UART_SHIFT 2
+#define AR2312_UART1 (AR2312_APBBASE + 0x1000) /* ar2312 only */
+#define AR2312_GPIO (AR2312_APBBASE + 0x2000)
+#define AR2312_RESETTMR (AR2312_APBBASE + 0x3000)
+#define AR2312_APB2AHB (AR2312_APBBASE + 0x4000)
+
+/*
+ * AR2312_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available. The AR2312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR2312_NUM_ENET_MAC 2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR2312_REV2 0x52 /* AR2312 WMAC (AP31) */
+#define AR5212_AR2312_REV7 0x57 /* AR2312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8 0x58 /* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR2312_RESETTMR (AR2312_APBBASE + 0x3000)
+#define AR2312_TIMER (AR2312_RESETTMR + 0x0000) /* countdown timer */
+#define AR2312_WD_CTRL (AR2312_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR2312_WD_TIMER (AR2312_RESETTMR + 0x000c) /* watchdog timer */
+#define AR2312_ISR (AR2312_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR2312_IMR (AR2312_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR2312_RESET (AR2312_RESETTMR + 0x0020)
+#define AR2312_CLOCKCTL0 (AR2312_RESETTMR + 0x0060)
+#define AR2312_CLOCKCTL1 (AR2312_RESETTMR + 0x0064)
+#define AR2312_CLOCKCTL2 (AR2312_RESETTMR + 0x0068)
+#define AR2312_SCRATCH (AR2312_RESETTMR + 0x006c)
+#define AR2312_PROCADDR (AR2312_RESETTMR + 0x0070)
+#define AR2312_PROC1 (AR2312_RESETTMR + 0x0074)
+#define AR2312_DMAADDR (AR2312_RESETTMR + 0x0078)
+#define AR2312_DMA1 (AR2312_RESETTMR + 0x007c)
+#define AR2312_ENABLE (AR2312_RESETTMR + 0x0080) /* interface enb */
+#define AR2312_REV (AR2312_RESETTMR + 0x0090) /* revision */
+
+/* AR2312_WD_CTRL register bit field definitions */
+#define AR2312_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR2312_WD_CTRL_NMI 0x0001
+#define AR2312_WD_CTRL_RESET 0x0002
+
+/* AR2312_ISR register bit field definitions */
+#define AR2312_ISR_NONE 0x0000
+#define AR2312_ISR_TIMER 0x0001
+#define AR2312_ISR_AHBPROC 0x0002
+#define AR2312_ISR_AHBDMA 0x0004
+#define AR2312_ISR_GPIO 0x0008
+#define AR2312_ISR_UART0 0x0010
+#define AR2312_ISR_UART0DMA 0x0020
+#define AR2312_ISR_WD 0x0040
+#define AR2312_ISR_LOCAL 0x0080
+
+/* AR2312_RESET register bit field definitions */
+#define AR2312_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR2312_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR2312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
+#define AR2312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR2312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR2312_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
+#define AR2312_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
+#define AR2312_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
+#define AR2312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR2312_RESET_APB 0x00000400 /* cold reset APB (ar2312) */
+#define AR2312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR2312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR2312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
+#define AR2312_RESET_NMI 0x00010000 /* send an NMI to the processor */
+#define AR2312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
+#define AR2312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
+#define AR2312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR2312_RESET_WDOG 0x00100000 /* last reset was a watchdog */
+
+/* Values for AR2312_CLOCKCTL1
+ *
+ * The AR2312_CLOCKCTL1 register is loaded based on the speed of
+ * our incoming clock. Currently, all valid configurations
+ * for an AR2312 use an ar5112 radio clocked at 40MHz. Until
+ * there are other configurations available, we'll hardcode
+ * this 40MHz assumption.
+ */
+#define AR2312_INPUT_CLOCK 40000000
+#define AR2312_CLOCKCTL1_IN40_OUT160MHZ 0x0405 /* 40MHz in, 160Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT180MHZ 0x0915 /* 40MHz in, 180Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT200MHZ 0x1935 /* 40MHz in, 200Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT220MHZ 0x0b15 /* 40MHz in, 220Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT240MHZ 0x0605 /* 40MHz in, 240Mhz out */
+
+#define AR2312_CLOCKCTL1_SELECTION AR2312_CLOCKCTL1_IN40_OUT180MHZ
+#define AR2312_CPU_CLOCK_RATE 180000000
+
+/*
+ * Special values for AR2313 'VIPER' PLL.
+ *
+ * These values do not match the latest datasheet for the AR2313,
+ * which appears to be an exact copy of the AR2312 in this area.
+ * The values were derived from the ECOS code provided in the Atheros
+ * LSDK-1.0 (and confirmed by checking values on an AR2313 reference
+ * design).
+ */
+#define AR2313_CLOCKCTL1_SELECTION 0x91245
+
+/* Bit fields for AR2312_CLOCKCTL2 */
+#define AR2312_CLOCKCTL2_WANT_RESET 0x00000001 /* reset with new vals */
+#define AR2312_CLOCKCTL2_WANT_DIV2 0x00000010 /* request /2 clock */
+#define AR2312_CLOCKCTL2_WANT_DIV4 0x00000020 /* request /4 clock */
+#define AR2312_CLOCKCTL2_WANT_PLL_BYPASS 0x00000080 /* request PLL bypass */
+#define AR2312_CLOCKCTL2_STATUS_DIV2 0x10000000 /* have /2 clock */
+#define AR2312_CLOCKCTL2_STATUS_DIV4 0x20000000 /* have /4 clock */
+#define AR2312_CLOCKCTL2_STATUS_PLL_BYPASS 0x80000000 /* PLL is bypassed */
+
+/* AR2312_CLOCKCTL1 register bit field definitions */
+#define AR2312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR2312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR2312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR2312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR2312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+/* Values for AR2312_CLOCKCTL */
+#define AR2312_CLOCKCTL_ETH0 0x0004 /* enable eth0 clock */
+#define AR2312_CLOCKCTL_ETH1 0x0008 /* enable eth1 clock */
+#define AR2312_CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */
+
+
+/* AR2312_ENABLE register bit field definitions */
+#define AR2312_ENABLE_ENET0 0x0002
+#define AR2312_ENABLE_ENET1 0x0004
+
+/* AR2312_REV register bit field definitions */
+#define AR2312_REV_WMAC_MAJ 0xf000
+#define AR2312_REV_WMAC_MAJ_S 12
+#define AR2312_REV_WMAC_MIN 0x0f00
+#define AR2312_REV_WMAC_MIN_S 8
+#define AR2312_REV_MAJ 0x00f0
+#define AR2312_REV_MAJ_S 4
+#define AR2312_REV_MIN 0x000f
+#define AR2312_REV_MIN_S 0
+#define AR2312_REV_CHIP (AR2312_REV_MAJ|AR2312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR2312_REV_MAJ_AR2312 0x4
+#define AR2312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR2312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR2312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/* AR2312_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
+#define FLASHCTL_AC_S 16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M 0x00030000
+#define FLASHCTL_AC_2M 0x00040000
+#define FLASHCTL_AC_4M 0x00050000
+#define FLASHCTL_AC_8M 0x00060000
+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
+#define FLASHCTL_WP 0x04000000 /* Write protect */
+#define FLASHCTL_BM 0x08000000 /* Burst mode */
+#define FLASHCTL_MW 0x30000000 /* Memory width */
+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */
+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */
+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
+
+#define AR2312_MAX_FLASH_SIZE 0x800000
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
+#define AR2312_FLASHCTL0 (AR2312_FLASHCTL + 0x00)
+#define AR2312_FLASHCTL1 (AR2312_FLASHCTL + 0x04)
+#define AR2312_FLASHCTL2 (AR2312_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR2312_MEM_CFG0 (AR2312_SDRAMCTL + 0x00)
+#define AR2312_MEM_CFG1 (AR2312_SDRAMCTL + 0x04)
+#define AR2312_MEM_REF (AR2312_SDRAMCTL + 0x08) /* 16 bit value */
+
+#define MEM_CFG0_F0 0x00000002 /* bank 0: 256Mb support */
+#define MEM_CFG0_T0 0x00000004 /* bank 0: chip width */
+#define MEM_CFG0_B0 0x00000008 /* bank 0: 2 vs 4 bank */
+#define MEM_CFG0_F1 0x00000020 /* bank 1: 256Mb support */
+#define MEM_CFG0_T1 0x00000040 /* bank 1: chip width */
+#define MEM_CFG0_B1 0x00000080 /* bank 1: 2 vs 4 bank */
+ /* bank 2 and 3 are not supported */
+#define MEM_CFG0_E 0x00020000 /* SDRAM clock control */
+#define MEM_CFG0_C 0x00040000 /* SDRAM clock enable */
+#define MEM_CFG0_X 0x00080000 /* bus width (0 == 32b) */
+#define MEM_CFG0_CAS 0x00300000 /* CAS latency (1-3) */
+#define MEM_CFG0_C1 0x00100000
+#define MEM_CFG0_C2 0x00200000
+#define MEM_CFG0_C3 0x00300000
+#define MEM_CFG0_R 0x00c00000 /* RAS to CAS latency (1-3) */
+#define MEM_CFG0_R1 0x00400000
+#define MEM_CFG0_R2 0x00800000
+#define MEM_CFG0_R3 0x00c00000
+#define MEM_CFG0_A 0x01000000 /* AHB auto pre-charge */
+
+#define MEM_CFG1_I 0x0001 /* memory init control */
+#define MEM_CFG1_M 0x0002 /* memory init control */
+#define MEM_CFG1_R 0x0004 /* read buffer enable (unused) */
+#define MEM_CFG1_W 0x0008 /* write buffer enable (unused) */
+#define MEM_CFG1_B 0x0010 /* SDRAM engine busy */
+#define MEM_CFG1_AC_2 0 /* AC of 2MB */
+#define MEM_CFG1_AC_4 1 /* AC of 4MB */
+#define MEM_CFG1_AC_8 2 /* AC of 8MB */
+#define MEM_CFG1_AC_16 3 /* AC of 16MB */
+#define MEM_CFG1_AC_32 4 /* AC of 32MB */
+#define MEM_CFG1_AC_64 5 /* AC of 64MB */
+#define MEM_CFG1_AC_128 6 /* AC of 128MB */
+
+#define MEM_CFG1_AC0_S 8
+#define MEM_CFG1_AC0 0x0700 /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_E0 0x0800 /* bank 0: enable */
+#define MEM_CFG1_AC1_S 12
+#define MEM_CFG1_AC1 0x7000 /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_E1 0x8000 /* bank 1: enable */
+
+/* GPIO Address Map */
+#define AR2312_GPIO (AR2312_APBBASE + 0x2000)
+#define AR2312_GPIO_DO (AR2312_GPIO + 0x00) /* output register */
+#define AR2312_GPIO_DI (AR2312_GPIO + 0x04) /* intput register */
+#define AR2312_GPIO_CR (AR2312_GPIO + 0x08) /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR2312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
+#define AR2312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
+#define AR2312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
+#define AR2312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
+#define AR2312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
+#define AR2312_NUM_GPIO 8
+
+#endif
diff --git a/arch/mips/mach-ar231x/include/mach/ar231x_platform.h b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
new file mode 100644
index 0000000..18f55b6
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
@@ -0,0 +1,104 @@
+/*
+ * Based on Linux driver:
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AR231X_PLATFORM_H
+#define __AR231X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar231x_board_config {
+ u32 magic; /* board data is valid */
+#define AR231X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
+ u16 cksum; /* checksum (starting with BD_REV 2) */
+ u16 rev; /* revision of this struct */
+#define BD_REV 4
+ char boardName[64]; /* Name of board */
+ u16 major; /* Board major number */
+ u16 minor; /* Board minor number */
+ u32 flags; /* Board configuration */
+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
+#define BD_UART1 0x00000004 /* UART1 is stuffed */
+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
+#define BD_SYSLED 0x00000020 /* System LED stuffed */
+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
+ u16 resetConfigGpio; /* Reset factory GPIO pin */
+ u16 sysLedGpio; /* System LED GPIO pin */
+
+ u32 cpuFreq; /* CPU core frequency in Hz */
+ u32 sysFreq; /* System frequency in Hz */
+ u32 cntFreq; /* Calculated C0_COUNT frequency */
+
+ u8 wlan0_mac[6];
+ u8 enet0_mac[6];
+ u8 enet1_mac[6];
+
+ u16 pciId; /* Pseudo PCIID for common code */
+ u16 memCap; /* cap bank1 in MB */
+
+ /* version 3 */
+ u8 wlan1_mac[6]; /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ 0x1000
+
+/*
+ * Platform device information for the Ethernet MAC
+ */
+enum reset_state {
+ SET,
+ REMOVE,
+};
+
+struct ar231x_eth_platform_data {
+ u32 base_reset;
+ u32 reset_mac;
+ u32 reset_phy;
+
+ u8 *mac;
+
+ void (*reset_bit)(u32 val, enum reset_state state);
+};
+
+struct ar231x_board_data {
+ u16 devid;
+
+ /* board config data */
+ struct ar231x_board_config *config;
+
+ struct ar231x_eth_platform_data eth_pdata;
+};
+
+void ar231x_find_config(u8 *flash_limit);
+
+void ar231x_reset_bit(u32 val, enum reset_state state);
+
+#endif /* __AR231X_PLATFORM_H */
--
1.8.1.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 2/3] net: add ar231x-eth support
2013-05-30 18:18 [PATCH v3 0/3] work on atheros ar2313 Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 1/3] MIPS: add Atheros ar531x family support Oleksij Rempel
@ 2013-05-30 18:18 ` Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 3/3] MIPS: ar231x: add netgear-wg102 Oleksij Rempel
2013-05-31 14:35 ` [PATCH v3 0/3] work on atheros ar2313 Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Oleksij Rempel @ 2013-05-30 18:18 UTC (permalink / raw)
To: barebox
This driver should work with some Atheros WiSoCs:
- ar2312, ar2313
- ar2315, ar2316 ...
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/ar231x.c | 437 +++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/ar231x.h | 219 ++++++++++++++++++++++++++
4 files changed, 664 insertions(+)
create mode 100644 drivers/net/ar231x.c
create mode 100644 drivers/net/ar231x.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2736094..5ad3e4d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -27,6 +27,13 @@ menu "Network drivers"
source "drivers/net/phy/Kconfig"
+config DRIVER_NET_AR231X
+ bool "AR231X Ethernet support"
+ depends on MACH_MIPS_AR231X
+ select PHYLIB
+ help
+ Support for the AR231x/531x ethernet controller
+
config DRIVER_NET_CALXEDA_XGMAC
bool "Calxeda xgmac"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 42136f8..73403fe 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DRIVER_NET_AR231X) += ar231x.o
obj-$(CONFIG_DRIVER_NET_CALXEDA_XGMAC) += xgmac.o
obj-$(CONFIG_DRIVER_NET_CS8900) += cs8900.o
obj-$(CONFIG_DRIVER_NET_CPSW) += cpsw.o
diff --git a/drivers/net/ar231x.c b/drivers/net/ar231x.c
new file mode 100644
index 0000000..5c09114
--- /dev/null
+++ b/drivers/net/ar231x.c
@@ -0,0 +1,437 @@
+/*
+ * ar231x.c: driver for the Atheros AR231x Ethernet device.
+ * This device is build in to SoC on ar231x series.
+ * All known of them are big endian.
+ *
+ * Based on Linux driver:
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/*
+ * Known issues:
+ * - broadcast packets are not filtered by hardware. On noisy network with
+ * lots of bcast packages rx_buffer can be completely filled after. Currently
+ * we clear rx_buffer transmit some package.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <io.h>
+
+#include "ar231x.h"
+
+static inline void dma_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->dma_regs + reg);
+}
+
+static inline u32 dma_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->dma_regs + reg);
+}
+
+static inline void eth_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->eth_regs + reg);
+}
+
+static inline u32 eth_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->eth_regs + reg);
+}
+
+static inline void phy_writel(struct ar231x_eth_priv *priv,
+ u32 val, int reg)
+{
+ __raw_writel(val, priv->phy_regs + reg);
+}
+
+static inline u32 phy_readl(struct ar231x_eth_priv *priv, int reg)
+{
+ return __raw_readl(priv->phy_regs + reg);
+}
+
+static void ar231x_reset_bit_(struct ar231x_eth_priv *priv,
+ u32 val, enum reset_state state)
+{
+ if (priv->reset_bit)
+ (*priv->reset_bit)(val, state);
+}
+
+static int ar231x_set_ethaddr(struct eth_device *edev, unsigned char *addr);
+static void ar231x_reset_regs(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ struct ar231x_eth_platform_data *cfg = priv->cfg;
+ u32 flags;
+
+ ar231x_reset_bit_(priv, cfg->reset_mac, SET);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_mac, REMOVE);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_phy, SET);
+ mdelay(10);
+
+ ar231x_reset_bit_(priv, cfg->reset_phy, REMOVE);
+ mdelay(10);
+
+ dma_writel(priv, DMA_BUS_MODE_SWR, AR231X_DMA_BUS_MODE);
+ mdelay(10);
+
+ dma_writel(priv, ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE),
+ AR231X_DMA_BUS_MODE);
+
+ /* FIXME: priv->{t,r}x_ring are virtual addresses,
+ * use virt-to-phys convertion */
+ dma_writel(priv, (u32)priv->tx_ring, AR231X_DMA_TX_RING);
+ dma_writel(priv, (u32)priv->rx_ring, AR231X_DMA_RX_RING);
+
+ dma_writel(priv, (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF),
+ AR231X_DMA_CONTROL);
+
+ eth_writel(priv, FLOW_CONTROL_FCE, AR231X_ETH_FLOW_CONTROL);
+ /* TODO: not sure if we need it here. */
+ eth_writel(priv, 0x8100, AR231X_ETH_VLAN_TAG);
+
+ /* Enable Ethernet Interface */
+ flags = (MAC_CONTROL_TE | /* transmit enable */
+ /* FIXME: MAC_CONTROL_PM - pass mcast.
+ * Seems like it makes no difference on some WiSoCs,
+ * for example ar2313.
+ * It should be tested on ar231[5,6,7] */
+ MAC_CONTROL_PM |
+ MAC_CONTROL_F | /* full duplex */
+ MAC_CONTROL_HBD); /* heart beat disabled */
+ eth_writel(priv, flags, AR231X_ETH_MAC_CONTROL);
+}
+
+static void ar231x_flash_rxdsc(struct ar231x_descr *rxdsc)
+{
+ rxdsc->status = DMA_RX_OWN;
+ rxdsc->devcs = ((AR2313_RX_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+ DMA_RX1_CHAINED);
+}
+
+static void ar231x_allocate_dma_descriptors(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u16 ar231x_descr_size = sizeof(struct ar231x_descr);
+ u16 i;
+
+ priv->tx_ring = xmalloc(ar231x_descr_size);
+ dev_dbg(&edev->dev, "allocate tx_ring @ %p\n", priv->tx_ring);
+
+ priv->rx_ring = xmalloc(ar231x_descr_size * AR2313_RXDSC_ENTRIES);
+ dev_dbg(&edev->dev, "allocate rx_ring @ %p\n", priv->rx_ring);
+
+ priv->rx_buffer = xmalloc(AR2313_RX_BUFSIZE * AR2313_RXDSC_ENTRIES);
+ dev_dbg(&edev->dev, "allocate rx_buffer @ %p\n", priv->rx_buffer);
+
+ /* Initialize the rx Descriptors */
+ for (i = 0; i < AR2313_RXDSC_ENTRIES; i++) {
+ struct ar231x_descr *rxdsc = &priv->rx_ring[i];
+ ar231x_flash_rxdsc(rxdsc);
+ rxdsc->buffer_ptr =
+ (u32)(priv->rx_buffer + AR2313_RX_BUFSIZE * i);
+ rxdsc->next_dsc_ptr = (u32)&priv->rx_ring[DSC_NEXT(i)];
+ }
+ /* set initial position of ring descriptor */
+ priv->next_rxdsc = &priv->rx_ring[0];
+}
+
+static void ar231x_adjust_link(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 mc;
+
+ if (edev->phydev->duplex != priv->oldduplex) {
+ mc = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
+ if (edev->phydev->duplex)
+ mc |= MAC_CONTROL_F;
+ else
+ mc |= MAC_CONTROL_DRO;
+ eth_writel(priv, mc, AR231X_ETH_MAC_CONTROL);
+ priv->oldduplex = edev->phydev->duplex;
+ }
+}
+
+static int ar231x_eth_init(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ ar231x_allocate_dma_descriptors(edev);
+ ar231x_reset_regs(edev);
+ ar231x_set_ethaddr(edev, priv->mac);
+ return 0;
+}
+
+static int ar231x_eth_open(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 tmp;
+
+ /* Enable RX. Now the rx_buffer will be filled.
+ * If it is full we may lose first transmission. In this case
+ * barebox should retry it.
+ * Or TODO: - force HW to filter some how broadcasts
+ * - disable RX if we do not need it. */
+ tmp = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ eth_writel(priv, (tmp | MAC_CONTROL_RE), AR231X_ETH_MAC_CONTROL);
+
+ return phy_device_connect(edev, &priv->miibus, (int)priv->phy_regs,
+ ar231x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+}
+
+static int ar231x_eth_recv(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ while (1) {
+ struct ar231x_descr *rxdsc = priv->next_rxdsc;
+ u32 status = rxdsc->status;
+
+ /* owned by DMA? */
+ if (status & DMA_RX_OWN)
+ break;
+
+ /* Pick only packets what we can handle:
+ * - only complete packet per buffer
+ * (First and Last at same time)
+ * - drop multicast */
+ if (!priv->kill_rx_ring &&
+ ((status & DMA_RX_MASK) == DMA_RX_FSLS)) {
+ u16 length =
+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff)
+ - CRC_LEN;
+ net_receive((void *)rxdsc->buffer_ptr, length);
+ }
+ /* Clean descriptor. now it is owned by DMA. */
+ priv->next_rxdsc = (struct ar231x_descr *)rxdsc->next_dsc_ptr;
+ ar231x_flash_rxdsc(rxdsc);
+ }
+ priv->kill_rx_ring = 0;
+ return 0;
+}
+
+static int ar231x_eth_send(struct eth_device *edev, void *packet,
+ int length)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ struct ar231x_descr *txdsc = priv->tx_ring;
+ u32 rx_missed;
+
+ /* We do not do async work.
+ * If rx_ring is full, there is nothing we can use. */
+ rx_missed = dma_readl(priv, AR231X_DMA_RX_MISSED);
+ if (rx_missed) {
+ priv->kill_rx_ring = 1;
+ ar231x_eth_recv(edev);
+ }
+
+ /* Setup the transmit descriptor. */
+ txdsc->devcs = ((length << DMA_TX1_BSIZE_SHIFT) | DMA_TX1_DEFAULT);
+ txdsc->buffer_ptr = (uint)packet;
+ txdsc->status = DMA_TX_OWN;
+
+ /* Trigger transmission */
+ dma_writel(priv, 0, AR231X_DMA_TX_POLL);
+
+ /* Take enough time to transmit packet. 100 is not enough. */
+ wait_on_timeout(2000 * MSECOND,
+ !(txdsc->status & DMA_TX_OWN));
+
+ /* We can't do match here. If it is still in progress,
+ * then engine is probably stalled or we wait not enough. */
+ if (txdsc->status & DMA_TX_OWN)
+ dev_err(&edev->dev, "Frame is still in progress.\n");
+
+ if (txdsc->status & DMA_TX_ERROR)
+ dev_err(&edev->dev, "Frame was aborted by engine\n");
+
+ /* Ready or not. Stop it. */
+ txdsc->status = 0;
+ return 0;
+}
+
+static void ar231x_eth_halt(struct eth_device *edev)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+ u32 tmp;
+
+ /* kill the MAC: disable RX and TX */
+ tmp = eth_readl(priv, AR231X_ETH_MAC_CONTROL);
+ eth_writel(priv, tmp & ~(MAC_CONTROL_RE | MAC_CONTROL_TE),
+ AR231X_ETH_MAC_CONTROL);
+
+ /* stop DMA */
+ dma_writel(priv, 0, AR231X_DMA_CONTROL);
+ dma_writel(priv, DMA_BUS_MODE_SWR, AR231X_DMA_BUS_MODE);
+
+ /* place PHY and MAC in reset */
+ ar231x_reset_bit_(priv, (priv->cfg->reset_mac | priv->cfg->reset_phy), SET);
+}
+
+static int ar231x_get_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ /* MAC address is stored on flash, in some kind of atheros config
+ * area. Platform code should read it and pass to the driver. */
+ memcpy(addr, priv->mac, 6);
+ return 0;
+}
+
+/**
+ * These device do not have build in MAC address.
+ * It is located on atheros-config field on flash.
+ */
+static int ar231x_set_ethaddr(struct eth_device *edev, unsigned char *addr)
+{
+ struct ar231x_eth_priv *priv = edev->priv;
+
+ eth_writel(priv,
+ (addr[5] << 8) | (addr[4]),
+ AR231X_ETH_MAC_ADDR1);
+ eth_writel(priv,
+ (addr[3] << 24) | (addr[2] << 16) |
+ (addr[1] << 8) | addr[0],
+ AR231X_ETH_MAC_ADDR2);
+
+ mdelay(10);
+ return 0;
+}
+
+#define MII_ADDR(phy, reg) \
+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+static int ar231x_miibus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+ uint64_t time_start;
+
+ phy_writel(priv, MII_ADDR(phy_id, regnum), AR231X_ETH_MII_ADDR);
+ time_start = get_time_ns();
+ while (phy_readl(priv, AR231X_ETH_MII_ADDR) & MII_ADDR_BUSY) {
+ if (is_timeout(time_start, SECOND)) {
+ dev_err(&bus->dev, "miibus read timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ return phy_readl(priv, AR231X_ETH_MII_DATA) >> MII_DATA_SHIFT;
+}
+
+static int ar231x_miibus_write(struct mii_bus *bus, int phy_id,
+ int regnum, u16 val)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+ uint64_t time_start = get_time_ns();
+
+ while (phy_readl(priv, AR231X_ETH_MII_ADDR) & MII_ADDR_BUSY) {
+ if (is_timeout(time_start, SECOND)) {
+ dev_err(&bus->dev, "miibus write timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ phy_writel(priv, val << MII_DATA_SHIFT, AR231X_ETH_MII_DATA);
+ phy_writel(priv, MII_ADDR(phy_id, regnum) | MII_ADDR_WRITE,
+ AR231X_ETH_MII_ADDR);
+ return 0;
+}
+
+static int ar231x_mdiibus_reset(struct mii_bus *bus)
+{
+ struct ar231x_eth_priv *priv = bus->priv;
+
+ ar231x_reset_regs(&priv->edev);
+ return 0;
+}
+
+static int ar231x_eth_probe(struct device_d *dev)
+{
+ struct ar231x_eth_priv *priv;
+ struct eth_device *edev;
+ struct mii_bus *miibus;
+ struct ar231x_eth_platform_data *pdata;
+
+ if (!dev->platform_data) {
+ dev_err(dev, "no platform data\n");
+ return -ENODEV;
+ }
+
+ pdata = dev->platform_data;
+
+ priv = xzalloc(sizeof(struct ar231x_eth_priv));
+ edev = &priv->edev;
+ miibus = &priv->miibus;
+ edev->priv = priv;
+
+ /* link all platform depended regs */
+ priv->mac = pdata->mac;
+ priv->reset_bit = pdata->reset_bit;
+
+ priv->eth_regs = dev_request_mem_region(dev, 0);
+ if (priv->eth_regs == NULL) {
+ dev_err(dev, "No eth_regs!!\n");
+ return -ENODEV;
+ }
+ /* we have 0x100000 for eth, part of it are dma regs.
+ * So they are already requested */
+ priv->dma_regs = (void *)(priv->eth_regs + 0x1000);
+
+ priv->phy_regs = dev_request_mem_region(dev, 1);
+ if (priv->phy_regs == NULL) {
+ dev_err(dev, "No phy_regs!!\n");
+ return -ENODEV;
+ }
+
+ priv->cfg = pdata;
+ edev->init = ar231x_eth_init;
+ edev->open = ar231x_eth_open;
+ edev->send = ar231x_eth_send;
+ edev->recv = ar231x_eth_recv;
+ edev->halt = ar231x_eth_halt;
+ edev->get_ethaddr = ar231x_get_ethaddr;
+ edev->set_ethaddr = ar231x_set_ethaddr;
+
+ priv->miibus.read = ar231x_miibus_read;
+ priv->miibus.write = ar231x_miibus_write;
+ priv->miibus.reset = ar231x_mdiibus_reset;
+ priv->miibus.priv = priv;
+ priv->miibus.parent = dev;
+
+ mdiobus_register(miibus);
+ eth_register(edev);
+
+ return 0;
+}
+
+static void ar231x_eth_remove(struct device_d *dev)
+{
+
+}
+
+static struct driver_d ar231x_eth_driver = {
+ .name = "ar231x_eth",
+ .probe = ar231x_eth_probe,
+ .remove = ar231x_eth_remove,
+};
+
+static int ar231x_eth_driver_init(void)
+{
+ return platform_driver_register(&ar231x_eth_driver);
+}
+device_initcall(ar231x_eth_driver_init);
diff --git a/drivers/net/ar231x.h b/drivers/net/ar231x.h
new file mode 100644
index 0000000..2468412
--- /dev/null
+++ b/drivers/net/ar231x.h
@@ -0,0 +1,219 @@
+/*
+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device.
+ * Based on Linux driver:
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _AR2313_2_H_
+#define _AR2313_2_H_
+
+#include <net.h>
+#include <mach/ar231x_platform.h>
+
+/* Allocate 64 RX buffers. This will reduce packet loss, until we will start
+ * processing them. It is important in noisy network with lots of broadcasts. */
+#define AR2313_RXDSC_ENTRIES 64
+#define DSC_NEXT(idx) (((idx) + 1) & (AR2313_RXDSC_ENTRIES - 1))
+
+/* Use system default buffers size. At the moment of writing it was 1518 */
+#define AR2313_RX_BUFSIZE PKTSIZE
+#define CRC_LEN 4
+
+/**
+ * DMA controller
+ */
+#define AR231X_DMA_BUS_MODE 0x00 /* (CSR0) */
+#define AR231X_DMA_TX_POLL 0x04 /* (CSR1) */
+#define AR231X_DMA_RX_POLL 0x08 /* (CSR2) */
+#define AR231X_DMA_RX_RING 0x0c /* (CSR3) */
+#define AR231X_DMA_TX_RING 0x10 /* (CSR4) */
+#define AR231X_DMA_STATUS 0x14 /* (CSR5) */
+#define AR231X_DMA_CONTROL 0x18 /* (CSR6) */
+#define AR231X_DMA_INTR_ENA 0x1c /* (CSR7) */
+#define AR231X_DMA_RX_MISSED 0x20 /* (CSR8) */
+/* reserverd 0x24-0x4c (CSR9-19) */
+#define AR231X_DMA_CUR_TX_BUF_ADDR 0x50 /* (CSR20) */
+#define AR231X_DMA_CUR_RX_BUF_ADDR 0x54 /* (CSR21) */
+
+/**
+ * Ethernet controller
+ */
+#define AR231X_ETH_MAC_CONTROL 0x00
+#define AR231X_ETH_MAC_ADDR1 0x04
+#define AR231X_ETH_MAC_ADDR2 0x08
+#define AR231X_ETH_MCAST_TABLE1 0x0c
+#define AR231X_ETH_MCAST_TABLE2 0x10
+#define AR231X_ETH_MII_ADDR 0x14
+#define AR231X_ETH_MII_DATA 0x18
+#define AR231X_ETH_FLOW_CONTROL 0x1c
+#define AR231X_ETH_VLAN_TAG 0x20
+/* pad 0x24 - 0x3c */
+/* ucast_table 0x40-0x5c */
+
+/**
+ * RX descriptor status bits. ar231x_descr.status
+ */
+#define DMA_RX_ERR_CRC BIT(1)
+#define DMA_RX_ERR_DRIB BIT(2)
+#define DMA_RX_ERR_MII BIT(3)
+#define DMA_RX_EV2 BIT(5)
+#define DMA_RX_ERR_COL BIT(6)
+#define DMA_RX_LONG BIT(7)
+#define DMA_RX_LS BIT(8) /* last descriptor */
+#define DMA_RX_FS BIT(9) /* first descriptor */
+#define DMA_RX_MF BIT(10) /* multicast frame */
+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */
+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */
+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */
+#define DMA_RX_ERROR BIT(15) /* error summary */
+#define DMA_RX_LEN_MASK 0x3fff0000
+#define DMA_RX_LEN_SHIFT 16
+#define DMA_RX_FILT BIT(30)
+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */
+#define DMA_RX_FSLS (DMA_RX_LS | DMA_RX_FS)
+#define DMA_RX_MASK (DMA_RX_FSLS | DMA_RX_MF | DMA_RX_ERROR)
+
+/**
+ * RX descriptor configuration bits. ar231x_descr.devcs
+ */
+#define DMA_RX1_BSIZE_MASK 0x000007ff
+#define DMA_RX1_BSIZE_SHIFT 0
+#define DMA_RX1_CHAINED BIT(24)
+#define DMA_RX1_RER BIT(25)
+
+/**
+ * TX descriptor status fields. ar231x_descr.status
+ */
+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK 0x78
+#define DMA_TX_COL_SHIFT 3
+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */
+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */
+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */
+#define DMA_TX_ERROR BIT(15) /* frame aborted */
+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */
+
+/**
+ * TX descriptor configuration bits. ar231x_descr.devcs
+ */
+#define DMA_TX1_BSIZE_MASK 0x000007ff
+#define DMA_TX1_BSIZE_SHIFT 0
+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */
+#define DMA_TX1_TER BIT(25) /* transmit end of ring */
+#define DMA_TX1_FS BIT(29) /* first segment */
+#define DMA_TX1_LS BIT(30) /* last segment */
+#define DMA_TX1_IC BIT(31) /* interrupt on completion */
+#define DMA_TX1_DEFAULT (DMA_TX1_FS | DMA_TX1_LS | DMA_TX1_TER)
+
+#define MAC_CONTROL_RE BIT(2) /* receive enable */
+#define MAC_CONTROL_TE BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC BIT(5) /* Deferral check */
+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */
+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */
+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */
+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */
+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */
+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */
+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */
+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode
+ * (valid frames only) */
+#define MAC_CONTROL_PM BIT(19) /* pass multicast */
+#define MAC_CONTROL_F BIT(20) /* full-duplex */
+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */
+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */
+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */
+#define MAC_CONTROL_RA BIT(31) /* receive all
+ * (valid and invalid frames) */
+
+#define MII_ADDR_BUSY BIT(0)
+#define MII_ADDR_WRITE BIT(1)
+#define MII_ADDR_REG_SHIFT 6
+#define MII_ADDR_PHY_SHIFT 11
+#define MII_DATA_SHIFT 0
+
+#define FLOW_CONTROL_FCE BIT(1)
+
+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */
+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */
+
+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */
+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */
+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */
+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */
+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
+
+#define DMA_CONTROL_SR BIT(1) /* start receive */
+#define DMA_CONTROL_ST BIT(13) /* start transmit */
+#define DMA_CONTROL_SF BIT(21) /* store and forward */
+
+
+struct ar231x_descr {
+ u32 status; /* OWN, Device control and status. */
+ u32 devcs; /* Packet control bitmap + Length. */
+ u32 buffer_ptr; /* Pointer to packet buffer. */
+ u32 next_dsc_ptr; /* Pointer to next descriptor in chain. */
+};
+
+/**
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar231x_eth_priv {
+ struct ar231x_eth_platform_data *cfg;
+ u8 *mac;
+ void __iomem *phy_regs;
+ void __iomem *eth_regs;
+ void __iomem *dma_regs;
+ void __iomem *reset_regs;
+
+ struct eth_device edev;
+ struct mii_bus miibus;
+
+ struct ar231x_descr *tx_ring;
+ struct ar231x_descr *rx_ring;
+ struct ar231x_descr *next_rxdsc;
+ u8 kill_rx_ring;
+ void *rx_buffer;
+
+ int oldduplex;
+ void (*reset_bit)(u32 val, enum reset_state state);
+};
+
+#endif /* _AR2313_H_ */
--
1.8.1.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v3 3/3] MIPS: ar231x: add netgear-wg102
2013-05-30 18:18 [PATCH v3 0/3] work on atheros ar2313 Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 1/3] MIPS: add Atheros ar531x family support Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 2/3] net: add ar231x-eth support Oleksij Rempel
@ 2013-05-30 18:18 ` Oleksij Rempel
2013-05-31 14:35 ` [PATCH v3 0/3] work on atheros ar2313 Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Oleksij Rempel @ 2013-05-30 18:18 UTC (permalink / raw)
To: barebox
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
arch/mips/Makefile | 1 +
arch/mips/boards/netgear-wg102/Kconfig | 6 ++++++
arch/mips/boards/netgear-wg102/Makefile | 1 +
arch/mips/boards/netgear-wg102/ram.c | 11 +++++++++++
arch/mips/mach-ar231x/Kconfig | 10 ++++++++++
5 files changed, 29 insertions(+)
create mode 100644 arch/mips/boards/netgear-wg102/Kconfig
create mode 100644 arch/mips/boards/netgear-wg102/Makefile
create mode 100644 arch/mips/boards/netgear-wg102/ram.c
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 135259f..dc0fe56 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -73,6 +73,7 @@ machine-$(CONFIG_MACH_MIPS_MALTA) := malta
board-$(CONFIG_BOARD_QEMU_MALTA) := qemu-malta
machine-$(CONFIG_MACH_MIPS_AR231X) := ar231x
+board-$(CONFIG_BOARD_NETGEAR_WG102) := netgear-wg102
machine-$(CONFIG_MACH_MIPS_BCM47XX) := bcm47xx
board-$(CONFIG_BOARD_DLINK_DIR320) := dlink-dir-320
diff --git a/arch/mips/boards/netgear-wg102/Kconfig b/arch/mips/boards/netgear-wg102/Kconfig
new file mode 100644
index 0000000..ceca6de
--- /dev/null
+++ b/arch/mips/boards/netgear-wg102/Kconfig
@@ -0,0 +1,6 @@
+if BOARD_NETGEAR_WG102
+
+config BOARDINFO
+ default "Netgear WG102"
+
+endif
diff --git a/arch/mips/boards/netgear-wg102/Makefile b/arch/mips/boards/netgear-wg102/Makefile
new file mode 100644
index 0000000..0899b66
--- /dev/null
+++ b/arch/mips/boards/netgear-wg102/Makefile
@@ -0,0 +1 @@
+obj-y += ram.o
diff --git a/arch/mips/boards/netgear-wg102/ram.c b/arch/mips/boards/netgear-wg102/ram.c
new file mode 100644
index 0000000..00a008a
--- /dev/null
+++ b/arch/mips/boards/netgear-wg102/ram.c
@@ -0,0 +1,11 @@
+#include <common.h>
+#include <init.h>
+#include <sizes.h>
+#include <asm/memory.h>
+
+static int mem_init(void)
+{
+ mips_add_ram0(SZ_16M);
+ return 0;
+}
+mem_initcall(mem_init);
diff --git a/arch/mips/mach-ar231x/Kconfig b/arch/mips/mach-ar231x/Kconfig
index 7694fe2..1c6a12f 100644
--- a/arch/mips/mach-ar231x/Kconfig
+++ b/arch/mips/mach-ar231x/Kconfig
@@ -4,4 +4,14 @@ config ARCH_TEXT_BASE
hex
default 0xa0800000
+choice
+ prompt "Board type"
+
+config BOARD_NETGEAR_WG102
+ bool "Netgear WG102"
+
+endchoice
+
+source arch/mips/boards/netgear-wg102/Kconfig
+
endif
--
1.8.1.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v3 0/3] work on atheros ar2313
2013-05-30 18:18 [PATCH v3 0/3] work on atheros ar2313 Oleksij Rempel
` (2 preceding siblings ...)
2013-05-30 18:18 ` [PATCH v3 3/3] MIPS: ar231x: add netgear-wg102 Oleksij Rempel
@ 2013-05-31 14:35 ` Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2013-05-31 14:35 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
On Thu, May 30, 2013 at 08:18:39PM +0200, Oleksij Rempel wrote:
> here is next version of pachtes for atheros ar2313.
> All previous comments and style fixes was handled here.
>
> Oleksij Rempel (3):
> MIPS: add Atheros ar531x family support
> net: add ar231x-eth support
> MIPS: ar231x: add netgear-wg102
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread