mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <linux@rempel-privat.de>
To: barebox@lists.infradead.org
Subject: [PATCH v3  1/3] MIPS: add Atheros ar531x family support
Date: Thu, 30 May 2013 20:18:40 +0200	[thread overview]
Message-ID: <1369937922-1557-2-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <1369937922-1557-1-git-send-email-linux@rempel-privat.de>

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/mips/Kconfig                                  |   9 +
 arch/mips/Makefile                                 |   2 +
 arch/mips/mach-ar231x/Kconfig                      |   7 +
 arch/mips/mach-ar231x/Makefile                     |   3 +
 arch/mips/mach-ar231x/ar231x.c                     | 195 +++++++++++++
 arch/mips/mach-ar231x/ar231x_reset.c               |  73 +++++
 arch/mips/mach-ar231x/board.c                      | 188 +++++++++++++
 arch/mips/mach-ar231x/include/mach/ar2312_regs.h   | 302 +++++++++++++++++++++
 .../mach-ar231x/include/mach/ar231x_platform.h     | 104 +++++++
 9 files changed, 883 insertions(+)
 create mode 100644 arch/mips/mach-ar231x/Kconfig
 create mode 100644 arch/mips/mach-ar231x/Makefile
 create mode 100644 arch/mips/mach-ar231x/ar231x.c
 create mode 100644 arch/mips/mach-ar231x/ar231x_reset.c
 create mode 100644 arch/mips/mach-ar231x/board.c
 create mode 100644 arch/mips/mach-ar231x/include/mach/ar2312_regs.h
 create mode 100644 arch/mips/mach-ar231x/include/mach/ar231x_platform.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d58b804..aee9671 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -45,6 +45,14 @@ config MACH_MIPS_MALTA
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select HAS_DEBUG_LL
 
+config MACH_MIPS_AR231X
+	bool "Atheros ar231x-based boards"
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select CSRC_R4K_LIB
+	select DRIVER_SERIAL_NS16550
+
 config MACH_MIPS_BCM47XX
 	bool "Broadcom BCM47xx-based boards"
 	select CSRC_R4K_LIB
@@ -64,6 +72,7 @@ config MACH_MIPS_XBURST
 endchoice
 
 source arch/mips/mach-malta/Kconfig
+source arch/mips/mach-ar231x/Kconfig
 source arch/mips/mach-bcm47xx/Kconfig
 source arch/mips/mach-xburst/Kconfig
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index c038933..135259f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -72,6 +72,8 @@ LDFLAGS_barebox += -nostdlib
 machine-$(CONFIG_MACH_MIPS_MALTA)	:= malta
 board-$(CONFIG_BOARD_QEMU_MALTA)	:= qemu-malta
 
+machine-$(CONFIG_MACH_MIPS_AR231X)	:= ar231x
+
 machine-$(CONFIG_MACH_MIPS_BCM47XX)	:= bcm47xx
 board-$(CONFIG_BOARD_DLINK_DIR320)	:= dlink-dir-320
 
diff --git a/arch/mips/mach-ar231x/Kconfig b/arch/mips/mach-ar231x/Kconfig
new file mode 100644
index 0000000..7694fe2
--- /dev/null
+++ b/arch/mips/mach-ar231x/Kconfig
@@ -0,0 +1,7 @@
+if MACH_MIPS_AR231X
+
+config ARCH_TEXT_BASE
+	hex
+	default 0xa0800000
+
+endif
diff --git a/arch/mips/mach-ar231x/Makefile b/arch/mips/mach-ar231x/Makefile
new file mode 100644
index 0000000..eba8e81
--- /dev/null
+++ b/arch/mips/mach-ar231x/Makefile
@@ -0,0 +1,3 @@
+obj-y += ar231x.o
+obj-y += board.o
+obj-y += ar231x_reset.o
diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
new file mode 100644
index 0000000..ca912bf
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x.c
@@ -0,0 +1,195 @@
+/*
+ * Based on Linux driver:
+ *  Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ *  Copyright (C) 2006 FON Technology, SL.
+ *  Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ *  Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <ns16550.h>
+#include <mach/ar231x_platform.h>
+#include <mach/ar2312_regs.h>
+
+struct ar231x_board_data ar231x_board;
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 };
+
+static unsigned int
+ar2312_cpu_frequency(void)
+{
+	unsigned int predivide_mask, predivide_shift;
+	unsigned int multiplier_mask, multiplier_shift;
+	unsigned int clock_ctl1, pre_divide_select, pre_divisor, multiplier;
+	unsigned int doubler_mask;
+	u32 devid;
+
+	devid = __raw_readl((char *)KSEG1ADDR(AR2312_REV));
+	devid &= AR2312_REV_MAJ;
+	devid >>= AR2312_REV_MAJ_S;
+	if (devid == AR2312_REV_MAJ_AR2313) {
+		predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+	} else { /* AR5312 and AR2312 */
+		predivide_mask = AR2312_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR2312_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR2312_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR2312_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR2312_CLOCKCTL1_DOUBLER_MASK;
+	}
+
+	/*
+	 * Clocking is derived from a fixed 40MHz input clock.
+	 *
+	 *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+	 *  sysFreq = cpuFreq / 4	   (used for APB clock, serial,
+	 *				    flash, Timer, Watchdog Timer)
+	 *
+	 *  cntFreq = cpuFreq / 2	   (use for CPU count/compare)
+	 *
+	 * So, for example, with a PLL multiplier of 5, we have
+	 *
+	 *  cpuFreq = 200MHz
+	 *  sysFreq = 50MHz
+	 *  cntFreq = 100MHz
+	 *
+	 * We compute the CPU frequency, based on PLL settings.
+	 */
+
+	clock_ctl1 = __raw_readl((char *)KSEG1ADDR(AR2312_CLOCKCTL1));
+	pre_divide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
+	pre_divisor = CLOCKCTL1_PREDIVIDE_TABLE[pre_divide_select];
+	multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+	if (clock_ctl1 & doubler_mask)
+		multiplier = multiplier << 1;
+
+	return (40000000 / pre_divisor) * multiplier;
+}
+
+static unsigned int
+ar2312_sys_frequency(void)
+{
+	return ar2312_cpu_frequency() / 4;
+}
+
+/*
+ * shutdown watchdog
+ */
+static int watchdog_init(void)
+{
+	pr_debug("Disable watchdog.\n");
+	__raw_writeb(AR2312_WD_CTRL_IGNORE_EXPIRATION,
+					(char *)KSEG1ADDR(AR2312_WD_CTRL));
+	return 0;
+}
+
+static void flash_init(void)
+{
+	u32 ctl, old_ctl;
+
+	/* Configure flash bank 0.
+	 * Assume 8M maximum window size on this SoC.
+	 * Flash will be aliased if it's smaller
+	 */
+	old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL0));
+	ctl = FLASHCTL_E | FLASHCTL_AC_8M | FLASHCTL_RBLE |
+			(0x01 << FLASHCTL_IDCY_S) |
+			(0x07 << FLASHCTL_WST1_S) |
+			(0x07 << FLASHCTL_WST2_S) | (old_ctl & FLASHCTL_MW);
+
+	__raw_writel(ctl, (char *)KSEG1ADDR(AR2312_FLASHCTL0));
+	/* Disable other flash banks */
+	old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL1));
+	__raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+			(char *)KSEG1ADDR(AR2312_FLASHCTL1));
+
+	old_ctl = __raw_readl((char *)KSEG1ADDR(AR2312_FLASHCTL2));
+	__raw_writel(old_ctl & ~(FLASHCTL_E | FLASHCTL_AC),
+			(char *)KSEG1ADDR(AR2312_FLASHCTL2));
+
+	/* We need to find atheros config. MAC address is there. */
+	ar231x_find_config((char *)KSEG1ADDR(AR2312_FLASH +
+					     AR2312_MAX_FLASH_SIZE));
+}
+
+static int ether_init(void)
+{
+	static struct resource res[2];
+	struct ar231x_eth_platform_data *eth = &ar231x_board.eth_pdata;
+
+	/* Base ETH registers  */
+	res[0].start = KSEG1ADDR(AR2312_ENET1);
+	res[0].end = res[0].start + 0x100000 - 1;
+	res[0].flags = IORESOURCE_MEM;
+	/* Base PHY registers */
+	res[1].start = KSEG1ADDR(AR2312_ENET0);
+	res[1].end = res[1].start + 0x100000 - 1;
+	res[1].flags = IORESOURCE_MEM;
+
+	/* MAC address located in atheros config on flash. */
+	eth->mac = ar231x_board.config->enet0_mac;
+
+	eth->reset_mac = AR2312_RESET_ENET0 | AR2312_RESET_ENET1;
+	eth->reset_phy = AR2312_RESET_EPHY0 | AR2312_RESET_EPHY1;
+
+	eth->reset_bit = ar231x_reset_bit;
+
+	/* FIXME: base_reset should be replaced with reset driver */
+	eth->base_reset = KSEG1ADDR(AR2312_RESET);
+
+	add_generic_device_res("ar231x_eth", DEVICE_ID_DYNAMIC, res, 2, eth);
+	return 0;
+}
+
+static int platform_init(void)
+{
+	add_generic_device("ar231x_reset", DEVICE_ID_SINGLE, NULL,
+			KSEG1ADDR(AR2312_RESET), 0x4,
+			IORESOURCE_MEM, NULL);
+	watchdog_init();
+	flash_init();
+	ether_init();
+	return 0;
+}
+late_initcall(platform_init);
+
+static struct NS16550_plat serial_plat = {
+	.shift = AR2312_UART_SHIFT,
+};
+
+static int ar2312_console_init(void)
+{
+	u32 reset;
+
+	/* reset UART0 */
+	reset = __raw_readl((char *)KSEG1ADDR(AR2312_RESET));
+	reset = ((reset & ~AR2312_RESET_APB) | AR2312_RESET_UART0);
+	__raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+	reset &= ~AR2312_RESET_UART0;
+	__raw_writel(reset, (char *)KSEG1ADDR(AR2312_RESET));
+
+	/* Register the serial port */
+	serial_plat.clock = ar2312_sys_frequency();
+	add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
+		8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
+	return 0;
+}
+console_initcall(ar2312_console_init);
diff --git a/arch/mips/mach-ar231x/ar231x_reset.c b/arch/mips/mach-ar231x/ar231x_reset.c
new file mode 100644
index 0000000..5ececb5
--- /dev/null
+++ b/arch/mips/mach-ar231x/ar231x_reset.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+
+static void __iomem *reset_base;
+
+void __noreturn reset_cpu(ulong addr)
+{
+	printf("reseting cpu\n");
+	__raw_writel(0x10000,
+		(char *)KSEG1ADDR(AR2312_WD_TIMER));
+	__raw_writel(AR2312_WD_CTRL_RESET,
+		(char *)KSEG1ADDR(AR2312_WD_CTRL));
+	unreachable();
+}
+EXPORT_SYMBOL(reset_cpu);
+
+static u32 ar231x_reset_readl(void)
+{
+	return __raw_readl(reset_base);
+}
+
+static void ar231x_reset_writel(u32 val)
+{
+	__raw_writel(val, reset_base);
+}
+
+void ar231x_reset_bit(u32 val, enum reset_state state)
+{
+	u32 tmp;
+
+	tmp = ar231x_reset_readl();
+
+	if (state == REMOVE)
+		ar231x_reset_writel(tmp & ~val);
+	else
+		ar231x_reset_writel(tmp | val);
+}
+EXPORT_SYMBOL(ar231x_reset_bit);
+
+static int ar231x_reset_probe(struct device_d *dev)
+{
+	reset_base = dev_request_mem_region(dev, 0);
+	if (!reset_base) {
+		dev_err(dev, "could not get memory region\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct driver_d ar231x_reset_driver = {
+	.probe	= ar231x_reset_probe,
+	.name	= "ar231x_reset",
+};
+
+static int ar231x_reset_init(void)
+{
+	return platform_driver_register(&ar231x_reset_driver);
+}
+coredevice_initcall(ar231x_reset_init);
diff --git a/arch/mips/mach-ar231x/board.c b/arch/mips/mach-ar231x/board.c
new file mode 100644
index 0000000..f1b876f
--- /dev/null
+++ b/arch/mips/mach-ar231x/board.c
@@ -0,0 +1,188 @@
+/*
+ * Based on Linux driver:
+ *  Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ *  Copyright (C) 2006 FON Technology, SL.
+ *  Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ *  Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#include <common.h>
+#include <io.h>
+#include <mach/ar2312_regs.h>
+#include <mach/ar231x_platform.h>
+#include <linux/stddef.h>
+#include <net.h>
+
+#define HDR_SIZE 6
+
+#define TAB_1 "\t"
+#define TAB_2 "\t\t"
+
+extern struct ar231x_board_data ar231x_board;
+
+static void
+ar231x_print_mac(unsigned char *mac)
+{
+	int i;
+	for (i = 0; i < 5; i++)
+		printf("%02x:", mac[i]);
+	printf("%02x\n", mac[5]);
+}
+
+#ifdef DEBUG_BOARD
+static void
+ar231x_print_board_config(struct ar231x_board_config *config)
+{
+	printf("board config:\n");
+	printf(TAB_1 "chsum:"		TAB_2 "%04x\n", config->cksum);
+	printf(TAB_1 "rev:"		TAB_2 "%04x\n", config->rev);
+	printf(TAB_1 "name:"		TAB_2 "%s\n", config->board_name);
+	printf(TAB_1 "maj:"		TAB_2 "%04x\n", config->major);
+	printf(TAB_1 "min:"		TAB_2 "%04x\n", config->minor);
+	printf(TAB_1 "board flags:" TAB_1 "%08x\n", config->flags);
+
+	if (config->flags & BD_ENET0)
+		printf(TAB_2 "ENET0 is stuffed\n");
+	if (config->flags & BD_ENET1)
+		printf(TAB_2 "ENET1 is stuffed\n");
+	if (config->flags & BD_UART1)
+		printf(TAB_2 "UART1 is stuffed\n");
+	if (config->flags & BD_UART0)
+		printf(TAB_2 "UART0 is stuffed (dma)\n");
+	if (config->flags & BD_RSTFACTORY)
+		printf(TAB_2 "Reset factory defaults stuffed\n");
+	if (config->flags & BD_SYSLED)
+		printf(TAB_2 "System LED stuffed\n");
+	if (config->flags & BD_EXTUARTCLK)
+		printf(TAB_2 "External UART clock\n");
+	if (config->flags & BD_CPUFREQ)
+		printf(TAB_2 "cpu freq is valid in nvram\n");
+	if (config->flags & BD_SYSFREQ)
+		printf(TAB_2 "sys freq is set in nvram\n");
+	if (config->flags & BD_WLAN0)
+		printf(TAB_2 "Enable WLAN0\n");
+	if (config->flags & BD_MEMCAP)
+		printf(TAB_2 "CAP SDRAM @ memCap for testing\n");
+	if (config->flags & BD_DISWATCHDOG)
+		printf(TAB_2 "disable system watchdog\n");
+	if (config->flags & BD_WLAN1)
+		printf(TAB_2 "Enable WLAN1 (ar5212)\n");
+	if (config->flags & BD_ISCASPER)
+		printf(TAB_2 "FLAG for AR2312\n");
+	if (config->flags & BD_WLAN0_2G_EN)
+		printf(TAB_2 "FLAG for radio0_2G\n");
+	if (config->flags & BD_WLAN0_5G_EN)
+		printf(TAB_2 "FLAG for radio0_5G\n");
+	if (config->flags & BD_WLAN1_2G_EN)
+		printf(TAB_2 "FLAG for radio1_2G\n");
+	if (config->flags & BD_WLAN1_5G_EN)
+		printf(TAB_2 "FLAG for radio1_5G\n");
+
+	printf(TAB_1 "ResetConf GPIO pin:" TAB_1 "%04x\n",
+	       config->reset_config_gpio);
+	printf(TAB_1 "Sys LED GPIO pin:" TAB_1 "%04x\n", config->sys_led_gpio);
+	printf(TAB_1 "CPU Freq:" TAB_2 "%u\n", config->cpu_freq);
+	printf(TAB_1 "Sys Freq:" TAB_2 "%u\n", config->sys_freq);
+	printf(TAB_1 "Calculated Freq:" TAB_1 "%u\n", config->cnt_freq);
+
+	printf(TAB_1 "wlan0 mac:" TAB_2);
+	ar231x_print_mac(config->wlan0_mac);
+	printf(TAB_1 "wlan1 mac:" TAB_2);
+	ar231x_print_mac(config->wlan1_mac);
+	printf(TAB_1 "eth0 mac:" TAB_2);
+	ar231x_print_mac(config->enet0_mac);
+	printf(TAB_1 "eth1 mac:" TAB_2);
+	ar231x_print_mac(config->enet1_mac);
+
+	printf(TAB_1 "Pseudo PCIID:" TAB_2 "%04x\n", config->pci_id);
+	printf(TAB_1 "Mem capacity:" TAB_2 "%u\n", config->mem_cap);
+}
+#endif
+
+static u16
+ar231x_cksum16(u8 *data, int size)
+{
+	int i;
+	u16 sum;
+
+	for (i = 0; i < size; i++)
+		sum += data[i];
+
+	return sum;
+}
+
+static void
+ar231x_check_mac(u8 *addr)
+{
+	if (!is_valid_ether_addr(addr)) {
+		pr_warn("config: no valid mac was found. "
+				"Generating random mac: ");
+		random_ether_addr(addr);
+		ar231x_print_mac(addr);
+	}
+}
+
+static u8 *
+ar231x_find_board_config(u8 *flash_limit)
+{
+	u8 *addr;
+	int found = 0;
+
+	for (addr = flash_limit - 0x1000;
+		addr >= flash_limit - 0x30000;
+		addr -= 0x1000) {
+
+		if (*((u32 *)addr) == AR231X_BD_MAGIC) {
+			found = 1;
+			pr_debug("config at %x\n", addr);
+			break;
+		}
+	}
+
+	if (!found)
+		addr = NULL;
+
+	return addr;
+}
+
+void
+ar231x_find_config(u8 *flash_limit)
+{
+	struct ar231x_board_config *config;
+	u8 *bcfg, bsize;
+	u8 brocken;
+
+	bcfg = ar231x_find_board_config(flash_limit);
+
+	bsize = sizeof(struct ar231x_board_config);
+	config = xzalloc(bsize);
+	ar231x_board.config = config;
+
+	if (bcfg) {
+		u16 cksum;
+		/* Copy the board and radio data to RAM.
+		 * If flash will go to CFI mode, we won't
+		 * be able to read to from mapped memory area */
+		memcpy(config, bcfg, bsize);
+		cksum = 0xca + ar231x_cksum16((unsigned char *)config + HDR_SIZE,
+				sizeof(struct ar231x_board_config) - HDR_SIZE);
+		if (cksum != config->cksum) {
+			pr_err("config: checksum is invalid: %04x != %04x\n",
+					cksum, config->cksum);
+			brocken = 1;
+		}
+		/* ar231x_print_board_config(config); */
+	}
+
+	/* We do not care about wlans here */
+	ar231x_check_mac(config->enet0_mac);
+	ar231x_check_mac(config->enet1_mac);
+}
diff --git a/arch/mips/mach-ar231x/include/mach/ar2312_regs.h b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
new file mode 100644
index 0000000..7ac1b09
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar2312_regs.h
@@ -0,0 +1,302 @@
+/*
+ * Based on Linux driver:
+ *  Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ *  Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ *  Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AR2312_H
+#define AR2312_H
+
+#include <asm/addrspace.h>
+
+/* Address Map */
+#define AR2312_SDRAM0		0x00000000
+#define AR2312_SDRAM1		0x08000000
+#define AR2312_WLAN0		0x18000000
+#define AR2312_WLAN1		0x18500000
+#define AR2312_ENET0		0x18100000
+#define AR2312_ENET1		0x18200000
+#define AR2312_SDRAMCTL		0x18300000
+#define AR2312_FLASHCTL		0x18400000
+#define AR2312_APBBASE		0x1c000000
+#define AR2312_FLASH		0x1e000000
+
+#define AR2312_CPU_CLOCK_RATE	180000000
+/* Used by romSizeMemory to set SDRAM Memory Refresh */
+#define AR2312_SDRAM_CLOCK_RATE	(AR2312_CPU_CLOCK_RATE / 2)
+/*
+ * SDRAM Memory Refresh (MEM_REF) value is computed as:
+ *    15.625us * SDRAM_CLOCK_RATE (in MHZ)
+ */
+#define DESIRED_MEMORY_REFRESH_NSECS	15625
+#define AR2312_SDRAM_MEMORY_REFRESH_VALUE \
+	((DESIRED_MEMORY_REFRESH_NSECS * AR2312_SDRAM_CLOCK_RATE/1000000) / 1000)
+
+/*
+ * APB Address Map
+ */
+#define AR2312_UART0		(AR2312_APBBASE + 0x0003) /* high speed uart */
+#define AR2312_UART_SHIFT	2
+#define AR2312_UART1		(AR2312_APBBASE + 0x1000) /* ar2312 only */
+#define AR2312_GPIO		(AR2312_APBBASE + 0x2000)
+#define AR2312_RESETTMR		(AR2312_APBBASE + 0x3000)
+#define AR2312_APB2AHB		(AR2312_APBBASE + 0x4000)
+
+/*
+ * AR2312_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available.  The AR2312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR2312_NUM_ENET_MAC	2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR2312_REV2	0x52	/* AR2312 WMAC (AP31) */
+#define AR5212_AR2312_REV7	0x57	/* AR2312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8	0x58	/* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR2312_RESETTMR		(AR2312_APBBASE  + 0x3000)
+#define AR2312_TIMER		(AR2312_RESETTMR + 0x0000) /* countdown timer */
+#define AR2312_WD_CTRL		(AR2312_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR2312_WD_TIMER		(AR2312_RESETTMR + 0x000c) /* watchdog timer */
+#define AR2312_ISR		(AR2312_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR2312_IMR		(AR2312_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR2312_RESET		(AR2312_RESETTMR + 0x0020)
+#define AR2312_CLOCKCTL0	(AR2312_RESETTMR + 0x0060)
+#define AR2312_CLOCKCTL1	(AR2312_RESETTMR + 0x0064)
+#define AR2312_CLOCKCTL2	(AR2312_RESETTMR + 0x0068)
+#define AR2312_SCRATCH		(AR2312_RESETTMR + 0x006c)
+#define AR2312_PROCADDR		(AR2312_RESETTMR + 0x0070)
+#define AR2312_PROC1		(AR2312_RESETTMR + 0x0074)
+#define AR2312_DMAADDR		(AR2312_RESETTMR + 0x0078)
+#define AR2312_DMA1		(AR2312_RESETTMR + 0x007c)
+#define AR2312_ENABLE		(AR2312_RESETTMR + 0x0080) /* interface enb */
+#define AR2312_REV		(AR2312_RESETTMR + 0x0090) /* revision */
+
+/* AR2312_WD_CTRL register bit field definitions */
+#define AR2312_WD_CTRL_IGNORE_EXPIRATION	0x0000
+#define AR2312_WD_CTRL_NMI			0x0001
+#define AR2312_WD_CTRL_RESET			0x0002
+
+/* AR2312_ISR register bit field definitions */
+#define AR2312_ISR_NONE		0x0000
+#define AR2312_ISR_TIMER	0x0001
+#define AR2312_ISR_AHBPROC	0x0002
+#define AR2312_ISR_AHBDMA	0x0004
+#define AR2312_ISR_GPIO		0x0008
+#define AR2312_ISR_UART0	0x0010
+#define AR2312_ISR_UART0DMA	0x0020
+#define AR2312_ISR_WD		0x0040
+#define AR2312_ISR_LOCAL	0x0080
+
+/* AR2312_RESET register bit field definitions */
+#define AR2312_RESET_SYSTEM	0x00000001  /* cold reset full system */
+#define AR2312_RESET_PROC	0x00000002  /* cold reset MIPS core */
+#define AR2312_RESET_WLAN0	0x00000004  /* cold reset WLAN MAC and BB */
+#define AR2312_RESET_EPHY0	0x00000008  /* cold reset ENET0 phy */
+#define AR2312_RESET_EPHY1	0x00000010  /* cold reset ENET1 phy */
+#define AR2312_RESET_ENET0	0x00000020  /* cold reset ENET0 mac */
+#define AR2312_RESET_ENET1	0x00000040  /* cold reset ENET1 mac */
+#define AR2312_RESET_UART0	0x00000100  /* cold reset UART0 (high speed) */
+#define AR2312_RESET_WLAN1	0x00000200  /* cold reset WLAN MAC/BB */
+#define AR2312_RESET_APB	0x00000400  /* cold reset APB (ar2312) */
+#define AR2312_RESET_WARM_PROC	0x00001000  /* warm reset MIPS core */
+#define AR2312_RESET_WARM_WLAN0_MAC	0x00002000  /* warm reset WLAN0 MAC */
+#define AR2312_RESET_WARM_WLAN0_BB	0x00004000  /* warm reset WLAN0 BaseBand */
+#define AR2312_RESET_NMI	0x00010000  /* send an NMI to the processor */
+#define AR2312_RESET_WARM_WLAN1_MAC	0x00020000  /* warm reset WLAN1 mac */
+#define AR2312_RESET_WARM_WLAN1_BB	0x00040000  /* warm reset WLAN1 baseband */
+#define AR2312_RESET_LOCAL_BUS	0x00080000  /* reset local bus */
+#define AR2312_RESET_WDOG	0x00100000  /* last reset was a watchdog */
+
+/* Values for AR2312_CLOCKCTL1
+ *
+ * The AR2312_CLOCKCTL1 register is loaded based on the speed of
+ * our incoming clock.  Currently, all valid configurations
+ * for an AR2312 use an ar5112 radio clocked at 40MHz.  Until
+ * there are other configurations available, we'll hardcode
+ * this 40MHz assumption.
+ */
+#define AR2312_INPUT_CLOCK		40000000
+#define AR2312_CLOCKCTL1_IN40_OUT160MHZ	0x0405 /* 40MHz in, 160Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT180MHZ	0x0915 /* 40MHz in, 180Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT200MHZ	0x1935 /* 40MHz in, 200Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT220MHZ	0x0b15 /* 40MHz in, 220Mhz out */
+#define AR2312_CLOCKCTL1_IN40_OUT240MHZ	0x0605 /* 40MHz in, 240Mhz out */
+
+#define AR2312_CLOCKCTL1_SELECTION AR2312_CLOCKCTL1_IN40_OUT180MHZ
+#define AR2312_CPU_CLOCK_RATE		180000000
+
+/*
+ * Special values for AR2313 'VIPER' PLL.
+ *
+ * These values do not match the latest datasheet for the AR2313,
+ * which appears to be an exact copy of the AR2312 in this area.
+ * The values were derived from the ECOS code provided in the Atheros
+ * LSDK-1.0 (and confirmed by checking values on an AR2313 reference
+ * design).
+ */
+#define AR2313_CLOCKCTL1_SELECTION	0x91245
+
+/* Bit fields for AR2312_CLOCKCTL2 */
+#define AR2312_CLOCKCTL2_WANT_RESET	0x00000001   /* reset with new vals */
+#define AR2312_CLOCKCTL2_WANT_DIV2	0x00000010   /* request /2 clock */
+#define AR2312_CLOCKCTL2_WANT_DIV4	0x00000020   /* request /4 clock */
+#define AR2312_CLOCKCTL2_WANT_PLL_BYPASS 0x00000080   /* request PLL bypass */
+#define AR2312_CLOCKCTL2_STATUS_DIV2	0x10000000   /* have /2 clock */
+#define AR2312_CLOCKCTL2_STATUS_DIV4	0x20000000   /* have /4 clock */
+#define AR2312_CLOCKCTL2_STATUS_PLL_BYPASS 0x80000000   /* PLL is bypassed */
+
+/* AR2312_CLOCKCTL1 register bit field definitions */
+#define AR2312_CLOCKCTL1_PREDIVIDE_MASK		0x00000030
+#define AR2312_CLOCKCTL1_PREDIVIDE_SHIFT	4
+#define AR2312_CLOCKCTL1_MULTIPLIER_MASK	0x00001f00
+#define AR2312_CLOCKCTL1_MULTIPLIER_SHIFT	8
+#define AR2312_CLOCKCTL1_DOUBLER_MASK		0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK		0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT	12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK	0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT	16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK		0x00000000
+
+/* Values for AR2312_CLOCKCTL */
+#define AR2312_CLOCKCTL_ETH0	0x0004	/* enable eth0 clock */
+#define AR2312_CLOCKCTL_ETH1	0x0008	/* enable eth1 clock */
+#define AR2312_CLOCKCTL_UART0	0x0010	/* enable UART0 external clock */
+
+
+/* AR2312_ENABLE register bit field definitions */
+#define AR2312_ENABLE_ENET0		0x0002
+#define AR2312_ENABLE_ENET1		0x0004
+
+/* AR2312_REV register bit field definitions */
+#define AR2312_REV_WMAC_MAJ	0xf000
+#define AR2312_REV_WMAC_MAJ_S	12
+#define AR2312_REV_WMAC_MIN	0x0f00
+#define AR2312_REV_WMAC_MIN_S	8
+#define AR2312_REV_MAJ		0x00f0
+#define AR2312_REV_MAJ_S	4
+#define AR2312_REV_MIN		0x000f
+#define AR2312_REV_MIN_S	0
+#define AR2312_REV_CHIP	(AR2312_REV_MAJ|AR2312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR2312_REV_MAJ_AR2312	0x4
+#define AR2312_REV_MAJ_AR2313	0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR2312_REV_MIN_DUAL	0x0	/* Dual WLAN version */
+#define AR2312_REV_MIN_SINGLE	0x1	/* Single WLAN version */
+
+/* AR2312_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY	0x0000000f	/* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S	0
+#define FLASHCTL_WST1	0x000003e0	/* Wait state 1 */
+#define FLASHCTL_WST1_S	5
+#define FLASHCTL_RBLE	0x00000400	/* Read byte lane enable */
+#define FLASHCTL_WST2	0x0000f800	/* Wait state 2 */
+#define FLASHCTL_WST2_S	11
+#define FLASHCTL_AC	0x00070000	/* Flash address check (added) */
+#define FLASHCTL_AC_S	16
+#define FLASHCTL_AC_128K	0x00000000
+#define FLASHCTL_AC_256K	0x00010000
+#define FLASHCTL_AC_512K	0x00020000
+#define FLASHCTL_AC_1M	0x00030000
+#define FLASHCTL_AC_2M	0x00040000
+#define FLASHCTL_AC_4M	0x00050000
+#define FLASHCTL_AC_8M	0x00060000
+#define FLASHCTL_AC_RES	0x00070000	/* 16MB is not supported */
+#define FLASHCTL_E	0x00080000	/* Flash bank enable (added) */
+#define FLASHCTL_BUSERR	0x01000000	/* Bus transfer error status flag */
+#define FLASHCTL_WPERR	0x02000000	/* Write protect error status flag */
+#define FLASHCTL_WP	0x04000000	/* Write protect */
+#define FLASHCTL_BM	0x08000000	/* Burst mode */
+#define FLASHCTL_MW	0x30000000	/* Memory width */
+#define FLASHCTL_MWx8	0x00000000	/* Memory width x8 */
+#define FLASHCTL_MWx16	0x10000000	/* Memory width x16 */
+#define FLASHCTL_MWx32	0x20000000	/* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR	0x00000000	/* Access type == no retry */
+#define FLASHCTL_ATR	0x80000000	/* Access type == retry every */
+#define FLASHCTL_ATR4	0xc0000000	/* Access type == retry every 4 */
+
+#define AR2312_MAX_FLASH_SIZE	0x800000
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
+#define AR2312_FLASHCTL0	(AR2312_FLASHCTL + 0x00)
+#define AR2312_FLASHCTL1	(AR2312_FLASHCTL + 0x04)
+#define AR2312_FLASHCTL2	(AR2312_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR2312_MEM_CFG0	(AR2312_SDRAMCTL + 0x00)
+#define AR2312_MEM_CFG1	(AR2312_SDRAMCTL + 0x04)
+#define AR2312_MEM_REF	(AR2312_SDRAMCTL + 0x08)	/* 16 bit value */
+
+#define MEM_CFG0_F0	0x00000002	/* bank 0: 256Mb support */
+#define MEM_CFG0_T0	0x00000004	/* bank 0: chip width */
+#define MEM_CFG0_B0	0x00000008	/* bank 0: 2 vs 4 bank */
+#define MEM_CFG0_F1	0x00000020	/* bank 1: 256Mb support */
+#define MEM_CFG0_T1	0x00000040	/* bank 1: chip width */
+#define MEM_CFG0_B1	0x00000080	/* bank 1: 2 vs 4 bank */
+					/* bank 2 and 3 are not supported */
+#define MEM_CFG0_E	0x00020000	/* SDRAM clock control */
+#define MEM_CFG0_C	0x00040000	/* SDRAM clock enable */
+#define MEM_CFG0_X	0x00080000	/* bus width (0 == 32b) */
+#define MEM_CFG0_CAS	0x00300000	/* CAS latency (1-3) */
+#define MEM_CFG0_C1	0x00100000
+#define MEM_CFG0_C2	0x00200000
+#define MEM_CFG0_C3	0x00300000
+#define MEM_CFG0_R	0x00c00000	/* RAS to CAS latency (1-3) */
+#define MEM_CFG0_R1	0x00400000
+#define MEM_CFG0_R2	0x00800000
+#define MEM_CFG0_R3	0x00c00000
+#define MEM_CFG0_A	0x01000000	/* AHB auto pre-charge */
+
+#define MEM_CFG1_I	0x0001	/* memory init control */
+#define MEM_CFG1_M	0x0002	/* memory init control */
+#define MEM_CFG1_R	0x0004	/* read buffer enable (unused) */
+#define MEM_CFG1_W	0x0008	/* write buffer enable (unused) */
+#define MEM_CFG1_B	0x0010	/* SDRAM engine busy */
+#define MEM_CFG1_AC_2	0	/* AC of 2MB */
+#define MEM_CFG1_AC_4	1	/* AC of 4MB */
+#define MEM_CFG1_AC_8	2	/* AC of 8MB */
+#define MEM_CFG1_AC_16	3	/* AC of 16MB */
+#define MEM_CFG1_AC_32	4	/* AC of 32MB */
+#define MEM_CFG1_AC_64	5	/* AC of 64MB */
+#define MEM_CFG1_AC_128	6	/* AC of 128MB */
+
+#define MEM_CFG1_AC0_S	8
+#define MEM_CFG1_AC0	0x0700	/* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_E0	0x0800	/* bank 0: enable */
+#define MEM_CFG1_AC1_S	12
+#define MEM_CFG1_AC1	0x7000	/* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_E1	0x8000	/* bank 1: enable */
+
+/* GPIO Address Map */
+#define AR2312_GPIO	(AR2312_APBBASE  + 0x2000)
+#define AR2312_GPIO_DO	(AR2312_GPIO + 0x00)	/* output register */
+#define AR2312_GPIO_DI	(AR2312_GPIO + 0x04)	/* intput register */
+#define AR2312_GPIO_CR	(AR2312_GPIO + 0x08)	/* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR2312_GPIO_CR_M(x)    (1 << (x))	/* mask for i/o */
+#define AR2312_GPIO_CR_O(x)    (0 << (x))	/* mask for output */
+#define AR2312_GPIO_CR_I(x)    (1 << (x))	/* mask for input */
+#define AR2312_GPIO_CR_INT(x)  (1 << ((x)+8))	/* mask for interrupt */
+#define AR2312_GPIO_CR_UART(x) (1 << ((x)+16))	/* uart multiplex */
+#define AR2312_NUM_GPIO		8
+
+#endif
diff --git a/arch/mips/mach-ar231x/include/mach/ar231x_platform.h b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
new file mode 100644
index 0000000..18f55b6
--- /dev/null
+++ b/arch/mips/mach-ar231x/include/mach/ar231x_platform.h
@@ -0,0 +1,104 @@
+/*
+ * Based on Linux driver:
+ *  Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ *  Copyright (C) 2006 FON Technology, SL.
+ *  Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Ported to Barebox:
+ *  Copyright (C) 2013 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AR231X_PLATFORM_H
+#define __AR231X_PLATFORM_H
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar231x_board_config {
+	u32 magic;			/* board data is valid */
+#define AR231X_BD_MAGIC	0x35333131	/* "5311", for all 531x platforms */
+	u16 cksum;			/* checksum (starting with BD_REV 2) */
+	u16 rev;			/* revision of this struct */
+#define BD_REV  4
+	char boardName[64];		/* Name of board */
+	u16 major;			/* Board major number */
+	u16 minor;			/* Board minor number */
+	u32 flags;			/* Board configuration */
+#define BD_ENET0	0x00000001	/* ENET0 is stuffed */
+#define BD_ENET1	0x00000002	/* ENET1 is stuffed */
+#define BD_UART1	0x00000004	/* UART1 is stuffed */
+#define BD_UART0	0x00000008	/* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY	0x00000010	/* Reset factory defaults stuffed */
+#define BD_SYSLED	0x00000020	/* System LED stuffed */
+#define BD_EXTUARTCLK	0x00000040	/* External UART clock */
+#define BD_CPUFREQ	0x00000080	/* cpu freq is valid in nvram */
+#define BD_SYSFREQ	0x00000100	/* sys freq is set in nvram */
+#define BD_WLAN0	0x00000200	/* Enable WLAN0 */
+#define BD_MEMCAP	0x00000400	/* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG	0x00000800	/* disable system watchdog */
+#define BD_WLAN1	0x00001000	/* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER	0x00002000	/* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN	0x00004000	/* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN	0x00008000	/* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN	0x00020000	/* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN	0x00040000	/* FLAG for radio0_2G */
+	u16 resetConfigGpio;		/* Reset factory GPIO pin */
+	u16 sysLedGpio;			/* System LED GPIO pin */
+
+	u32 cpuFreq;			/* CPU core frequency in Hz */
+	u32 sysFreq;			/* System frequency in Hz */
+	u32 cntFreq;			/* Calculated C0_COUNT frequency */
+
+	u8  wlan0_mac[6];
+	u8  enet0_mac[6];
+	u8  enet1_mac[6];
+
+	u16 pciId;			/* Pseudo PCIID for common code */
+	u16 memCap;			/* cap bank1 in MB */
+
+	/* version 3 */
+	u8  wlan1_mac[6];		/* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ		0x1000
+
+/*
+ * Platform device information for the Ethernet MAC
+ */
+enum reset_state {
+	SET,
+	REMOVE,
+};
+
+struct ar231x_eth_platform_data {
+	u32 base_reset;
+	u32 reset_mac;
+	u32 reset_phy;
+
+	u8 *mac;
+
+	void (*reset_bit)(u32 val, enum reset_state state);
+};
+
+struct ar231x_board_data {
+	u16 devid;
+
+	/* board config data */
+	struct ar231x_board_config *config;
+
+	struct ar231x_eth_platform_data eth_pdata;
+};
+
+void ar231x_find_config(u8 *flash_limit);
+
+void ar231x_reset_bit(u32 val, enum reset_state state);
+
+#endif /* __AR231X_PLATFORM_H */
-- 
1.8.1.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-05-30 18:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-30 18:18 [PATCH v3 0/3] work on atheros ar2313 Oleksij Rempel
2013-05-30 18:18 ` Oleksij Rempel [this message]
2013-05-30 18:18 ` [PATCH v3 2/3] net: add ar231x-eth support Oleksij Rempel
2013-05-30 18:18 ` [PATCH v3 3/3] MIPS: ar231x: add netgear-wg102 Oleksij Rempel
2013-05-31 14:35 ` [PATCH v3 0/3] work on atheros ar2313 Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369937922-1557-2-git-send-email-linux@rempel-privat.de \
    --to=linux@rempel-privat.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox