From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 4/6] tegra: deduplicate clk defines
Date: Tue, 4 Jun 2013 09:29:21 +0200 [thread overview]
Message-ID: <1370330963-3610-4-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1370330963-3610-1-git-send-email-dev@lynxeye.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/mach-tegra/include/mach/tegra20-car.h | 90 +++++++++-----------------
arch/arm/mach-tegra/tegra_avp_init.c | 6 +-
2 files changed, 33 insertions(+), 63 deletions(-)
diff --git a/arch/arm/mach-tegra/include/mach/tegra20-car.h b/arch/arm/mach-tegra/include/mach/tegra20-car.h
index 5669732..54c74c7 100644
--- a/arch/arm/mach-tegra/include/mach/tegra20-car.h
+++ b/arch/arm/mach-tegra/include/mach/tegra20-car.h
@@ -111,68 +111,38 @@
#define CRC_PLLX_MISC_VCOCON_MASK (0xf << CRC_PLLX_MISC_VCOCON_SHIFT)
#define CRC_RST_DEV_L_SET 0x300
-#define CRC_RST_DEV_L_SET_CACHE2 (1 << 31)
-#define CRC_RST_DEV_L_SET_VCP (1 << 29)
-#define CRC_RST_DEV_L_SET_HOST1X (1 << 28)
-#define CRC_RST_DEV_L_SET_DISP1 (1 << 27)
-#define CRC_RST_DEV_L_SET_DISP2 (1 << 26)
-#define CRC_RST_DEV_L_SET_IDE (1 << 25)
-#define CRC_RST_DEV_L_SET_3D (1 << 24)
-#define CRC_RST_DEV_L_SET_ISP (1 << 23)
-#define CRC_RST_DEV_L_SET_USBD (1 << 22)
-#define CRC_RST_DEV_L_SET_2D (1 << 21)
-#define CRC_RST_DEV_L_SET_VI (1 << 20)
-#define CRC_RST_DEV_L_SET_EPP (1 << 19)
-#define CRC_RST_DEV_L_SET_I2S2 (1 << 18)
-#define CRC_RST_DEV_L_SET_PWM (1 << 17)
-#define CRC_RST_DEV_L_SET_TWC (1 << 16)
-#define CRC_RST_DEV_L_SET_SDMMC4 (1 << 15)
-#define CRC_RST_DEV_L_SET_SDMMC1 (1 << 14)
-#define CRC_RST_DEV_L_SET_NDFLASH (1 << 13)
-#define CRC_RST_DEV_L_SET_I2C1 (1 << 12)
-#define CRC_RST_DEV_L_SET_I2S1 (1 << 11)
-#define CRC_RST_DEV_L_SET_SPDIF (1 << 10)
-#define CRC_RST_DEV_L_SET_SDMMC2 (1 << 9)
-#define CRC_RST_DEV_L_SET_GPIO (1 << 8)
-#define CRC_RST_DEV_L_SET_UART2 (1 << 7)
-#define CRC_RST_DEV_L_SET_UART1 (1 << 6)
-#define CRC_RST_DEV_L_SET_TMR (1 << 5)
-#define CRC_RST_DEV_L_SET_AC97 (1 << 3)
-#define CRC_RST_DEV_L_SET_SYS (1 << 2)
-#define CRC_RST_DEV_L_SET_COP (1 << 1)
-#define CRC_RST_DEV_L_SET_CPU (1 << 0)
+#define CRC_RST_DEV_L_CACHE2 (1 << 31)
+#define CRC_RST_DEV_L_VCP (1 << 29)
+#define CRC_RST_DEV_L_HOST1X (1 << 28)
+#define CRC_RST_DEV_L_DISP1 (1 << 27)
+#define CRC_RST_DEV_L_DISP2 (1 << 26)
+#define CRC_RST_DEV_L_IDE (1 << 25)
+#define CRC_RST_DEV_L_3D (1 << 24)
+#define CRC_RST_DEV_L_ISP (1 << 23)
+#define CRC_RST_DEV_L_USBD (1 << 22)
+#define CRC_RST_DEV_L_2D (1 << 21)
+#define CRC_RST_DEV_L_VI (1 << 20)
+#define CRC_RST_DEV_L_EPP (1 << 19)
+#define CRC_RST_DEV_L_I2S2 (1 << 18)
+#define CRC_RST_DEV_L_PWM (1 << 17)
+#define CRC_RST_DEV_L_TWC (1 << 16)
+#define CRC_RST_DEV_L_SDMMC4 (1 << 15)
+#define CRC_RST_DEV_L_SDMMC1 (1 << 14)
+#define CRC_RST_DEV_L_NDFLASH (1 << 13)
+#define CRC_RST_DEV_L_I2C1 (1 << 12)
+#define CRC_RST_DEV_L_I2S1 (1 << 11)
+#define CRC_RST_DEV_L_SPDIF (1 << 10)
+#define CRC_RST_DEV_L_SDMMC2 (1 << 9)
+#define CRC_RST_DEV_L_GPIO (1 << 8)
+#define CRC_RST_DEV_L_UART2 (1 << 7)
+#define CRC_RST_DEV_L_UART1 (1 << 6)
+#define CRC_RST_DEV_L_TMR (1 << 5)
+#define CRC_RST_DEV_L_AC97 (1 << 3)
+#define CRC_RST_DEV_L_SYS (1 << 2)
+#define CRC_RST_DEV_L_COP (1 << 1)
+#define CRC_RST_DEV_L_CPU (1 << 0)
#define CRC_RST_DEV_L_CLR 0x304
-#define CRC_RST_DEV_L_CLR_CACHE2 (1 << 31)
-#define CRC_RST_DEV_L_CLR_VCP (1 << 29)
-#define CRC_RST_DEV_L_CLR_HOST1X (1 << 28)
-#define CRC_RST_DEV_L_CLR_DISP1 (1 << 27)
-#define CRC_RST_DEV_L_CLR_DISP2 (1 << 26)
-#define CRC_RST_DEV_L_CLR_IDE (1 << 25)
-#define CRC_RST_DEV_L_CLR_3D (1 << 24)
-#define CRC_RST_DEV_L_CLR_ISP (1 << 23)
-#define CRC_RST_DEV_L_CLR_USBD (1 << 22)
-#define CRC_RST_DEV_L_CLR_2D (1 << 21)
-#define CRC_RST_DEV_L_CLR_VI (1 << 20)
-#define CRC_RST_DEV_L_CLR_EPP (1 << 19)
-#define CRC_RST_DEV_L_CLR_I2S2 (1 << 18)
-#define CRC_RST_DEV_L_CLR_PWM (1 << 17)
-#define CRC_RST_DEV_L_CLR_TWC (1 << 16)
-#define CRC_RST_DEV_L_CLR_SDMMC4 (1 << 15)
-#define CRC_RST_DEV_L_CLR_SDMMC1 (1 << 14)
-#define CRC_RST_DEV_L_CLR_NDFLASH (1 << 13)
-#define CRC_RST_DEV_L_CLR_I2C1 (1 << 12)
-#define CRC_RST_DEV_L_CLR_I2S1 (1 << 11)
-#define CRC_RST_DEV_L_CLR_SPDIF (1 << 10)
-#define CRC_RST_DEV_L_CLR_SDMMC2 (1 << 9)
-#define CRC_RST_DEV_L_CLR_GPIO (1 << 8)
-#define CRC_RST_DEV_L_CLR_UART2 (1 << 7)
-#define CRC_RST_DEV_L_CLR_UART1 (1 << 6)
-#define CRC_RST_DEV_L_CLR_TMR (1 << 5)
-#define CRC_RST_DEV_L_CLR_AC97 (1 << 3)
-#define CRC_RST_DEV_L_CLR_SYS (1 << 2)
-#define CRC_RST_DEV_L_CLR_COP (1 << 1)
-#define CRC_RST_DEV_L_CLR_CPU (1 << 0)
#define CRC_RST_CPU_CMPLX_SET 0x340
diff --git a/arch/arm/mach-tegra/tegra_avp_init.c b/arch/arm/mach-tegra/tegra_avp_init.c
index 4823733..5099e91 100644
--- a/arch/arm/mach-tegra/tegra_avp_init.c
+++ b/arch/arm/mach-tegra/tegra_avp_init.c
@@ -54,14 +54,14 @@ static void assert_maincomplex_reset(int num_cores)
mask |= 0x1111 << i;
writel(mask, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_SET);
- writel(CRC_RST_DEV_L_SET_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
+ writel(CRC_RST_DEV_L_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
}
/* release reset state of the first core of the main CPU complex */
static void deassert_cpu0_reset(void)
{
writel(0x1111, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_CLR);
- writel(CRC_RST_DEV_L_CLR_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_CLR);
+ writel(CRC_RST_DEV_L_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_CLR);
}
/* stop all internal and external clocks to the main CPU complex */
@@ -220,7 +220,7 @@ void barebox_arm_reset_vector(void)
deassert_cpu0_reset();
/* assert AVP reset to stop execution here */
- writel(CRC_RST_DEV_L_SET_COP, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
+ writel(CRC_RST_DEV_L_COP, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
unreachable();
}
--
1.8.2.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-06-04 7:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-04 7:29 [PATCH 1/6] tegra: change clocksource driver to be more lowlevel Lucas Stach
2013-06-04 7:29 ` [PATCH 2/6] clk: allow to instanciate clk gate without registering it Lucas Stach
2013-06-04 7:29 ` [PATCH 3/6] clk: allow to instanciate clk mux " Lucas Stach
2013-06-04 7:29 ` Lucas Stach [this message]
2013-06-04 7:29 ` [PATCH 5/6] tegra: add new clock framework driver Lucas Stach
2013-06-04 7:29 ` [PATCH 6/6] tegra: add peripheral clocks Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370330963-3610-4-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox