From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Juergen Beisert <jbe@pengutronix.de>
Subject: [PATCH 04/17] ARM: MXS: Add MXS specific clk types
Date: Thu, 20 Jun 2013 08:54:08 +0200 [thread overview]
Message-ID: <1371711261-10039-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1371711261-10039-1-git-send-email-s.hauer@pengutronix.de>
MXS needs some special MXS specific clock types:
- pll
- ref (fractional divider)
- busy divider (divider with additional busy bit to poll on a rate change)
- lcdif (Combined clock out of a fractional divider, a divider and a gate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/Kconfig | 2 +
drivers/clk/Makefile | 2 +
drivers/clk/mxs/Makefile | 2 +
drivers/clk/mxs/clk-div.c | 112 ++++++++++++++++++++++++++++++++
drivers/clk/mxs/clk-frac.c | 136 +++++++++++++++++++++++++++++++++++++++
drivers/clk/mxs/clk-lcdif.c | 75 ++++++++++++++++++++++
drivers/clk/mxs/clk-pll.c | 117 ++++++++++++++++++++++++++++++++++
drivers/clk/mxs/clk-ref.c | 152 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/mxs/clk.h | 52 +++++++++++++++
9 files changed, 650 insertions(+)
create mode 100644 drivers/clk/mxs/Makefile
create mode 100644 drivers/clk/mxs/clk-div.c
create mode 100644 drivers/clk/mxs/clk-frac.c
create mode 100644 drivers/clk/mxs/clk-lcdif.c
create mode 100644 drivers/clk/mxs/clk-pll.c
create mode 100644 drivers/clk/mxs/clk-ref.c
create mode 100644 drivers/clk/mxs/clk.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cfb82b0..af5d8cd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -88,6 +88,8 @@ config ARCH_MVEBU
config ARCH_MXS
bool "Freescale i.MX23/28 (mxs) based"
select GENERIC_GPIO
+ select COMMON_CLK
+ select CLKDEV_LOOKUP
config ARCH_NETX
bool "Hilscher NetX based"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 656b859..d6c923d 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,3 +1,5 @@
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed.o clk-divider.o clk-fixed-factor.o \
clk-mux.o clk-gate.o clk-divider-table.o
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
+
+obj-$(CONFIG_ARCH_MXS) += mxs/
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
new file mode 100644
index 0000000..8b1173d
--- /dev/null
+++ b/drivers/clk/mxs/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_MXS) += clk-ref.o clk-pll.o clk-frac.o clk-div.o
+obj-$(CONFIG_DRIVER_VIDEO_STM) += clk-lcdif.o
diff --git a/drivers/clk/mxs/clk-div.c b/drivers/clk/mxs/clk-div.c
new file mode 100644
index 0000000..e8dae25
--- /dev/null
+++ b/drivers/clk/mxs/clk-div.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <common.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+/**
+ * struct clk_div - mxs integer divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @reg: register address
+ * @busy: busy bit shift
+ *
+ * The mxs divider clock is a subclass of basic clk_divider with an
+ * addtional busy bit.
+ */
+struct clk_div {
+ struct clk_divider divider;
+ const char *parent;
+ const struct clk_ops *ops;
+ void __iomem *reg;
+ u8 busy;
+};
+
+static inline struct clk_div *to_clk_div(struct clk *clk)
+{
+ struct clk_divider *divider = container_of(clk, struct clk_divider, clk);
+
+ return container_of(divider, struct clk_div, divider);
+}
+
+static unsigned long clk_div_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct clk_div *div = to_clk_div(clk);
+
+ return div->ops->recalc_rate(&div->divider.clk, parent_rate);
+}
+
+static long clk_div_round_rate(struct clk *clk, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_div *div = to_clk_div(clk);
+
+ return div->ops->round_rate(&div->divider.clk, rate, prate);
+}
+
+static int clk_div_set_rate(struct clk *clk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_div *div = to_clk_div(clk);
+ int ret;
+
+ ret = div->ops->set_rate(&div->divider.clk, rate, parent_rate);
+ if (ret)
+ return ret;
+
+ if (clk_is_enabled(clk))
+ while (readl(div->reg) & 1 << div->busy);
+
+ return 0;
+}
+
+static struct clk_ops clk_div_ops = {
+ .recalc_rate = clk_div_recalc_rate,
+ .round_rate = clk_div_round_rate,
+ .set_rate = clk_div_set_rate,
+};
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+ struct clk_div *div;
+ int ret;
+
+ div = xzalloc(sizeof(*div));
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ div->parent = parent_name;
+ div->divider.clk.name = name;
+ div->divider.clk.ops = &clk_div_ops;
+ div->divider.clk.parent_names = &div->parent;
+ div->divider.clk.num_parents = 1;
+
+ div->reg = reg;
+ div->busy = busy;
+
+ div->divider.reg = reg;
+ div->divider.shift = shift;
+ div->divider.width = width;
+ div->divider.flags = CLK_DIVIDER_ONE_BASED;
+ div->ops = &clk_divider_ops;
+
+ ret = clk_register(&div->divider.clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &div->divider.clk;
+}
diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c
new file mode 100644
index 0000000..7aa8504
--- /dev/null
+++ b/drivers/clk/mxs/clk-frac.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <common.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <io.h>
+#include <asm-generic/div64.h>
+
+#include "clk.h"
+
+/**
+ * struct clk_frac - mxs fractional divider clock
+ * @hw: clk_hw for the fractional divider clock
+ * @reg: register address
+ * @shift: the divider bit shift
+ * @width: the divider bit width
+ * @busy: busy bit shift
+ *
+ * The clock is an adjustable fractional divider with a busy bit to wait
+ * when the divider is adjusted.
+ */
+struct clk_frac {
+ struct clk clk;
+ const char *parent;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 busy;
+};
+
+#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, clk)
+
+static unsigned long clk_frac_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(clk);
+ u32 div;
+
+ div = readl(frac->reg) >> frac->shift;
+ div &= (1 << frac->width) - 1;
+
+ return (parent_rate >> frac->width) * div;
+}
+
+static long clk_frac_round_rate(struct clk *clk, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_frac *frac = to_clk_frac(clk);
+ unsigned long parent_rate = *prate;
+ u32 div;
+ u64 tmp;
+
+ if (rate > parent_rate)
+ return -EINVAL;
+
+ tmp = rate;
+ tmp <<= frac->width;
+ do_div(tmp, parent_rate);
+ div = tmp;
+
+ if (!div)
+ return -EINVAL;
+
+ return (parent_rate >> frac->width) * div;
+}
+
+static int clk_frac_set_rate(struct clk *clk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_frac *frac = to_clk_frac(clk);
+ u32 div, val;
+ u64 tmp;
+
+ if (rate > parent_rate)
+ return -EINVAL;
+
+ tmp = rate;
+ tmp <<= frac->width;
+ do_div(tmp, parent_rate);
+ div = tmp;
+
+ if (!div)
+ return -EINVAL;
+
+ val = readl(frac->reg);
+ val &= ~(((1 << frac->width) - 1) << frac->shift);
+ val |= div << frac->shift;
+ writel(val, frac->reg);
+
+ if (clk_is_enabled(clk))
+ while (readl(frac->reg) & 1 << frac->busy);
+
+ return 0;
+}
+
+static struct clk_ops clk_frac_ops = {
+ .recalc_rate = clk_frac_recalc_rate,
+ .round_rate = clk_frac_round_rate,
+ .set_rate = clk_frac_set_rate,
+};
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy)
+{
+ struct clk_frac *frac;
+ int ret;
+
+ frac = kzalloc(sizeof(*frac), GFP_KERNEL);
+ if (!frac)
+ return ERR_PTR(-ENOMEM);
+
+ frac->parent = parent_name;
+ frac->clk.name = name;
+ frac->clk.ops = &clk_frac_ops;
+ frac->clk.parent_names = &frac->parent;
+ frac->clk.num_parents = 1;
+
+ frac->reg = reg;
+ frac->shift = shift;
+ frac->width = width;
+
+ ret = clk_register(&frac->clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &frac->clk;
+}
diff --git a/drivers/clk/mxs/clk-lcdif.c b/drivers/clk/mxs/clk-lcdif.c
new file mode 100644
index 0000000..86dfe89
--- /dev/null
+++ b/drivers/clk/mxs/clk-lcdif.c
@@ -0,0 +1,75 @@
+#include <common.h>
+#include <io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+struct clk_lcdif {
+ struct clk clk;
+
+ struct clk *frac, *div, *gate;
+ const char *parent;
+};
+
+#define to_clk_lcdif(_hw) container_of(_hw, struct clk_lcdif, clk)
+
+static int clk_lcdif_set_rate(struct clk *clk, unsigned long rate,
+ unsigned long unused)
+{
+ struct clk_lcdif *lcdif = to_clk_lcdif(clk);
+ unsigned long frac, div, best_div = 1;
+ int delta, best_delta = 0x7fffffff;
+ unsigned long frate, rrate, best_frate;
+ unsigned long parent_rate = clk_get_rate(clk_get_parent(lcdif->frac));
+
+ best_frate = parent_rate;
+
+ for (frac = 18; frac < 35; frac++) {
+ frate = (parent_rate / frac) * 18;
+ div = frate / rate;
+ if (!div)
+ div = 1;
+ rrate = frate / div;
+ delta = rate - rrate;
+ if (abs(delta) < abs(best_delta)) {
+ best_frate = frate;
+ best_div = div;
+ best_delta = delta;
+ }
+ }
+
+ clk_set_rate(lcdif->frac, best_frate);
+ best_frate = clk_get_rate(lcdif->frac);
+ clk_set_rate(lcdif->div, (best_frate + best_div) / best_div);
+
+ return 0;
+}
+
+static const struct clk_ops clk_lcdif_ops = {
+ .set_rate = clk_lcdif_set_rate,
+};
+
+struct clk *mxs_clk_lcdif(const char *name, struct clk *frac, struct clk *div,
+ struct clk *gate)
+{
+ struct clk_lcdif *lcdif;
+ int ret;
+
+ lcdif = xzalloc(sizeof(*lcdif));
+
+ lcdif->parent = gate->name;
+ lcdif->frac = frac;
+ lcdif->div = div;
+ lcdif->gate = gate;
+ lcdif->clk.name = name;
+ lcdif->clk.ops = &clk_lcdif_ops;
+ lcdif->clk.parent_names = &lcdif->parent;
+ lcdif->clk.num_parents = 1;
+
+ ret = clk_register(&lcdif->clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &lcdif->clk;
+}
diff --git a/drivers/clk/mxs/clk-pll.c b/drivers/clk/mxs/clk-pll.c
new file mode 100644
index 0000000..89fd6b5
--- /dev/null
+++ b/drivers/clk/mxs/clk-pll.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <common.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <io.h>
+
+#include "clk.h"
+
+#define SET 0x4
+#define CLR 0x8
+
+/**
+ * struct clk_pll - mxs pll clock
+ * @hw: clk_hw for the pll
+ * @base: base address of the pll
+ * @power: the shift of power bit
+ * @rate: the clock rate of the pll
+ *
+ * The mxs pll is a fixed rate clock with power and gate control,
+ * and the shift of gate bit is always 31.
+ */
+struct clk_pll {
+ struct clk clk;
+ const char *parent;
+ void __iomem *base;
+ u8 power;
+ unsigned long rate;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, clk)
+
+static int clk_pll_enable(struct clk *clk)
+{
+ struct clk_pll *pll = to_clk_pll(clk);
+
+ writel(1 << pll->power, pll->base + SET);
+
+ udelay(10);
+
+ writel(1 << 31, pll->base + CLR);
+
+ return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+ struct clk_pll *pll = to_clk_pll(clk);
+
+ writel(1 << 31, pll->base + SET);
+
+ writel(1 << pll->power, pll->base + CLR);
+}
+
+static int clk_pll_is_enabled(struct clk *clk)
+{
+ struct clk_pll *pll = to_clk_pll(clk);
+ u32 val;
+
+ val = readl(pll->base);
+
+ if (val & (1 << 31))
+ return 0;
+ else
+ return 1;
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(clk);
+
+ return pll->rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .is_enabled = clk_pll_is_enabled,
+};
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+ void __iomem *base, u8 power, unsigned long rate)
+{
+ struct clk_pll *pll;
+ int ret;
+
+ pll = xzalloc(sizeof(*pll));
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->parent = parent_name;
+ pll->clk.name = name;
+ pll->clk.ops = &clk_pll_ops;
+ pll->clk.parent_names = &pll->parent;
+ pll->clk.num_parents = 1;
+
+ pll->base = base;
+ pll->rate = rate;
+ pll->power = power;
+
+ ret = clk_register(&pll->clk);
+ if (ret)
+ ERR_PTR(ret);
+
+ return &pll->clk;
+}
diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c
new file mode 100644
index 0000000..d62ebfc
--- /dev/null
+++ b/drivers/clk/mxs/clk-ref.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <common.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <io.h>
+#include <asm-generic/div64.h>
+
+#include "clk.h"
+
+/**
+ * struct clk_ref - mxs reference clock
+ * @hw: clk_hw for the reference clock
+ * @reg: register address
+ * @idx: the index of the reference clock within the same register
+ *
+ * The mxs reference clock sources from pll. Every 4 reference clocks share
+ * one register space, and @idx is used to identify them. Each reference
+ * clock has a gate control and a fractional * divider. The rate is calculated
+ * as pll rate * (18 / FRAC), where FRAC = 18 ~ 35.
+ */
+struct clk_ref {
+ struct clk clk;
+ const char *parent;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_ref(_hw) container_of(_hw, struct clk_ref, clk)
+
+#define SET 0x4
+#define CLR 0x8
+
+static int clk_ref_enable(struct clk *clk)
+{
+ struct clk_ref *ref = to_clk_ref(clk);
+
+ writel(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR);
+
+ return 0;
+}
+
+static void clk_ref_disable(struct clk *clk)
+{
+ struct clk_ref *ref = to_clk_ref(clk);
+
+ writel(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET);
+}
+
+static unsigned long clk_ref_recalc_rate(struct clk *clk,
+ unsigned long parent_rate)
+{
+ struct clk_ref *ref = to_clk_ref(clk);
+ u64 tmp = parent_rate;
+ u8 frac = (readl(ref->reg) >> (ref->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_ref_round_rate(struct clk *clk, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ u64 tmp = parent_rate;
+ u32 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+
+ if (frac < 18)
+ frac = 18;
+ else if (frac > 35)
+ frac = 35;
+
+ tmp = parent_rate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_ref_set_rate(struct clk *clk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_ref *ref = to_clk_ref(clk);
+ u64 tmp = parent_rate;
+ u32 val;
+ u32 frac, shift = ref->idx * 8;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+
+ if (frac < 18)
+ frac = 18;
+ else if (frac > 35)
+ frac = 35;
+
+ val = readl(ref->reg);
+ val &= ~(0x3f << shift);
+ val |= frac << shift;
+ writel(val, ref->reg);
+
+ return 0;
+}
+
+static const struct clk_ops clk_ref_ops = {
+ .enable = clk_ref_enable,
+ .disable = clk_ref_disable,
+ .recalc_rate = clk_ref_recalc_rate,
+ .round_rate = clk_ref_round_rate,
+ .set_rate = clk_ref_set_rate,
+};
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_ref *ref;
+ int ret;
+
+ ref = xzalloc(sizeof(*ref));
+ if (!ref)
+ return ERR_PTR(-ENOMEM);
+
+ ref->parent = parent_name;
+ ref->clk.name = name;
+ ref->clk.ops = &clk_ref_ops;
+ ref->clk.parent_names = &ref->parent;
+ ref->clk.num_parents = 1;
+
+ ref->reg = reg;
+ ref->idx = idx;
+
+ ret = clk_register(&ref->clk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return &ref->clk;
+}
diff --git a/drivers/clk/mxs/clk.h b/drivers/clk/mxs/clk.h
new file mode 100644
index 0000000..b4fcfa0
--- /dev/null
+++ b/drivers/clk/mxs/clk.h
@@ -0,0 +1,52 @@
+#ifndef __MXS_CLK_H
+#define __MXS_CLK_H
+
+int mxs_clk_wait(void __iomem *reg, u8 shift);
+
+struct clk *mxs_clk_pll(const char *name, const char *parent_name,
+ void __iomem *base, u8 power, unsigned long rate);
+
+struct clk *mxs_clk_ref(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *mxs_clk_div(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+struct clk *mxs_clk_frac(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width, u8 busy);
+
+#ifdef CONFIG_DRIVER_VIDEO_STM
+struct clk *mxs_clk_lcdif(const char *name, struct clk *frac, struct clk *div,
+ struct clk *gate);
+#else
+static inline struct clk *mxs_clk_lcdif(const char *name, struct clk *frac, struct clk *div,
+ struct clk *gate)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static inline struct clk *mxs_clk_fixed(const char *name, int rate)
+{
+ return clk_fixed(name, rate);
+}
+
+static inline struct clk *mxs_clk_gate(const char *name,
+ const char *parent_name, void __iomem *reg, u8 shift)
+{
+ return clk_gate_inverted(name, parent_name, reg, shift);
+}
+
+static inline struct clk *mxs_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parent_names, int num_parents)
+{
+ return clk_mux(name, reg, shift, width, parent_names, num_parents);
+}
+
+static inline struct clk *mxs_clk_fixed_factor(const char *name,
+ const char *parent_name, unsigned int mult, unsigned int div)
+{
+ return clk_fixed_factor(name, parent_name, mult, div);
+}
+
+#endif /* __MXS_CLK_H */
--
1.8.3.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-06-20 6:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 6:54 [PATCH] convert MXS to common clk Sascha Hauer
2013-06-20 6:54 ` [PATCH 01/17] clk: divider: Add onebased divider support Sascha Hauer
2013-06-20 6:54 ` [PATCH 02/17] clk: gate: Add inverted gate support Sascha Hauer
2013-06-20 6:54 ` [PATCH 03/17] clk: add prototype for clk_is_enabled Sascha Hauer
2013-06-20 6:54 ` Sascha Hauer [this message]
2013-06-21 12:14 ` [PATCH 04/17] ARM: MXS: Add MXS specific clk types Jürgen Beisert
2013-06-20 6:54 ` [PATCH 05/17] ARM: MXS: add clk drivers Sascha Hauer
2013-06-20 6:54 ` [PATCH 06/17] ARM: MXS: remove board specific clock setups Sascha Hauer
2013-06-20 6:54 ` [PATCH 07/17] mci: mxs: Use dev_* Sascha Hauer
2013-06-20 6:54 ` [PATCH 08/17] net: fec: Use clk API unconditionally Sascha Hauer
2013-06-20 6:54 ` [PATCH 09/17] mci: mxs: use common clk API Sascha Hauer
2013-06-20 6:54 ` [PATCH 10/17] mtd: gpmi-nand: switch to clk support Sascha Hauer
2013-06-20 6:54 ` [PATCH 11/17] serial: auart: Use " Sascha Hauer
2013-06-20 6:54 ` [PATCH 12/17] serial: stm: " Sascha Hauer
2013-06-20 6:54 ` [PATCH 13/17] spi: mxs: " Sascha Hauer
2013-06-20 6:54 ` [PATCH 14/17] ARM: MXS: octotp: switch to " Sascha Hauer
2013-06-20 6:54 ` [PATCH 15/17] ARM: MXS: remove imx_enable_enetclk Sascha Hauer
2013-06-20 6:54 ` [PATCH 16/17] video: stm: switch to clk support Sascha Hauer
2013-06-20 6:54 ` [PATCH 17/17] ARM: MXS: remove old clock support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371711261-10039-5-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jbe@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox