From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UrPR9-0000IB-WA for barebox@lists.infradead.org; Tue, 25 Jun 2013 09:21:41 +0000 From: Sascha Hauer Date: Tue, 25 Jun 2013 11:20:46 +0200 Message-Id: <1372152052-5463-7-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1372152052-5463-1-git-send-email-s.hauer@pengutronix.de> References: <1372152052-5463-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 06/12] Add multi images support To: barebox@lists.infradead.org This adds the make infrastructure to build multiple SoC or board specific images from a single barebox binary. The basic idea is that we no longer have a single pbl, but instead multiple pbls, one per image if necessary. Each pbl is defined by its entry function so that each pbl can do exactly what a given board needs. Additionally the pbls together with a self extracting barebox binary can be encapsulated in specific image formats. Signed-off-by: Sascha Hauer --- Makefile | 8 +++ arch/arm/cpu/Makefile | 4 +- arch/arm/cpu/start-images.c | 49 +++++++++++++++ arch/arm/cpu/uncompress.c | 108 ++++++++++++++++++++++++++++++++ arch/arm/include/asm/barebox-arm.h | 4 ++ arch/arm/mach-imx/Kconfig | 1 + images/Makefile | 122 +++++++++++++++++++++++++++++++++++++ pbl/Kconfig | 16 +++++ 8 files changed, 311 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/start-images.c create mode 100644 arch/arm/cpu/uncompress.c create mode 100644 images/Makefile diff --git a/Makefile b/Makefile index 32c46fd..d82e795 100644 --- a/Makefile +++ b/Makefile @@ -481,7 +481,14 @@ export KBUILD_BINARY ?= barebox.bin barebox-flash-image: $(KBUILD_IMAGE) FORCE $(call if_changed,ln) +images images/%.s: barebox.bin FORCE + $(Q)$(MAKE) $(build)=images $@ + +ifdef CONFIG_PBL_MULTI_IMAGES +all: $(KBUILD_DTBS) barebox.bin images +else all: barebox-flash-image $(KBUILD_DTBS) +endif common-$(CONFIG_PBL_IMAGE) += pbl/ @@ -987,6 +994,7 @@ clean-dirs := $(addprefix _clean_,$(srctree) $(barebox-alldirs)) PHONY += $(clean-dirs) clean archclean $(clean-dirs): + $(Q)$(MAKE) $(clean)=images $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: archclean $(clean-dirs) diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile index c442b35..d99577b 100644 --- a/arch/arm/cpu/Makefile +++ b/arch/arm/cpu/Makefile @@ -21,7 +21,9 @@ obj-$(CONFIG_CPU_32v7) += cache-armv7.o pbl-$(CONFIG_CPU_32v7) += cache-armv7.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -pbl-y += start-pbl.o setupc.o +pbl-y += setupc.o +pbl-$(CONFIG_PBL_SINGLE_IMAGE) += start-pbl.o +pbl-$(CONFIG_PBL_MULTI_IMAGES) += start-images.o uncompress.o obj-y += common.o pbl-y += common.o diff --git a/arch/arm/cpu/start-images.c b/arch/arm/cpu/start-images.c new file mode 100644 index 0000000..d48d245 --- /dev/null +++ b/arch/arm/cpu/start-images.c @@ -0,0 +1,49 @@ +/* + * start-pbl.c + * + * Copyright (c) 2010-2012 Sascha Hauer , Pengutronix + * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void __naked __noreturn barebox_arm_entry(uint32_t membase, uint32_t memsize, + uint32_t boarddata) +{ + unsigned long barebox_base; + void __noreturn (*barebox)(uint32_t, uint32_t, uint32_t); + + barebox_base = ld_var(__image_end) - get_runtime_offset() + 4; + + if (IS_ENABLED(CONFIG_THUMB2_BAREBOX)) + barebox = (void *)(barebox_base + 1); + else + barebox = (void *)barebox_base; + + barebox(membase, memsize, boarddata); +} diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c new file mode 100644 index 0000000..b401f8e --- /dev/null +++ b/arch/arm/cpu/uncompress.c @@ -0,0 +1,108 @@ +/* + * uncompress.c - uncompressor code for self extracing pbl image + * + * Copyright (c) 2010-2013 Sascha Hauer , Pengutronix + * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "mmu-early.h" + +unsigned long free_mem_ptr; +unsigned long free_mem_end_ptr; + +static int __attribute__((__used__)) + __attribute__((__section__(".image_end"))) + __image_end_dummy = 0xdeadbeef; + +static void noinline uncompress(uint32_t membase, + uint32_t memsize, uint32_t boarddata) +{ + uint32_t offset; + uint32_t pg_len; + void __noreturn (*barebox)(uint32_t, uint32_t, uint32_t); + uint32_t endmem = membase + memsize; + unsigned long barebox_base; + uint32_t *ptr; + void *pg_start; + + endmem -= STACK_SIZE; /* stack */ + + if (IS_ENABLED(CONFIG_PBL_RELOCATABLE)) + relocate_to_current_adr(); + + /* Get offset between linked address and runtime address */ + offset = get_runtime_offset(); + + if (IS_ENABLED(CONFIG_RELOCATABLE)) + barebox_base = arm_barebox_image_place(membase + memsize); + else + barebox_base = TEXT_BASE; + + setup_c(); + + if (IS_ENABLED(CONFIG_MMU_EARLY)) { + endmem &= ~0x3fff; + endmem -= SZ_16K; /* ttb */ + mmu_early_enable(membase, memsize, endmem); + } + + endmem -= SZ_128K; /* early malloc */ + free_mem_ptr = endmem; + free_mem_end_ptr = free_mem_ptr + SZ_128K; + + ptr = (void *)__image_end; + pg_start = ptr + 1; + pg_len = *(ptr); + + pbl_barebox_uncompress((void*)barebox_base, pg_start, pg_len); + + arm_early_mmu_cache_flush(); + flush_icache(); + + if (IS_ENABLED(CONFIG_THUMB2_BAREBOX)) + barebox = (void *)(barebox_base + 1); + else + barebox = (void *)barebox_base; + + barebox(membase, memsize, boarddata); +} + +/* + * Generic second stage pbl uncompressor entry + */ +ENTRY_FUNCTION(start_uncompress)(uint32_t membase, uint32_t memsize, + uint32_t boarddata) +{ + arm_setup_stack(membase + memsize - 16); + + uncompress(membase, memsize, boarddata); +} diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h index cd8decf..226e000 100644 --- a/arch/arm/include/asm/barebox-arm.h +++ b/arch/arm/include/asm/barebox-arm.h @@ -77,4 +77,8 @@ static inline unsigned long arm_barebox_image_place(unsigned long endmem) return endmem; } +#define ENTRY_FUNCTION(name) \ + void __naked __section(.text_head_entry_##name) \ + name + #endif /* _BAREBOX_ARM_H_ */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 644c05e..d58682b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -67,6 +67,7 @@ config BOARDINFO choice prompt "Select boot mode" depends on !ARCH_IMX_INTERNAL_BOOT_USE_IMXIMAGE + depends on !HAVE_PBL_MULTI_IMAGES help i.MX processors support two different boot modes. With the internal boot mode the boot medium contains a header describing the image to diff --git a/images/Makefile b/images/Makefile new file mode 100644 index 0000000..fe1f77d --- /dev/null +++ b/images/Makefile @@ -0,0 +1,122 @@ +# +# barebox image generation Makefile +# +# This Makefile generates multiple images from a common barebox image +# and different pbl (pre bootloader) images. Optionally the result is +# encapsulated in SoC (or SoC boot type) specific image formats. +# +# The basic idea here is that we generate a single barebox main binary. This +# is compressed and prepended with a self extractor, generated as barebox.x. +# barebox.x is then prepended with different board specific pbls. The pbls +# are generally named after their entrypoints. So a pcm038 specific pbl will +# generate the following files: +# +# start_imx27_pcm038.pbl - The ELF file, linked with the entrypoint start_imx27_pcm038 +# start_imx27_pcm038.pblb - The raw binary of the above. +# start_imx27_pcm038.pblx - The pblb appended with barebox.x +# start_imx27_pcm038.pbl.map - The linker map file +# start_imx27_pcm038.pbl.s - the disassembled ELF, generated with: +# make images/start_imx27_pcm038.pbl.s +# +# Example Makefile snippets for the i.MX51 babbage board (for readability in opposite +# order): +# +## image-$(CONFIG_MACH_FREESCALE_MX51_PDK) += barebox-imx51-babbage.img +# +# For CONFIG_MACH_FREESCALE_MX51_PDK build barebox-imx51-babbage.img +# +## FILE_barebox-imx51-babbage.img = start_imx51_babbage.pblx.imximg +# +# barebox-imx51-babbage.img should be generated (copied) from +# start_imx51_babbage.pblx.imximg. This copy process is only done so that we +# can generate images with a sane name. So what we really need for this +# board is a i.MX specific image, a .imximg +# +## imximage-$(CONFIG_MACH_FREESCALE_MX51_PDK) += start_imx51_babbage.pblx.imximg +## CFG_start_imx51_babbage.pblx.imximg = $(board)/freescale-mx51-pdk/flash-header.imxcfg +# +# The .imximg can be generated from a .pblx using a rule specified in Makefile.imx. +# The configfile needed for this image is specified with CFG_ = +# +## pblx-$(CONFIG_MACH_FREESCALE_MX51_PDK) += start_imx51_babbage +# +# For this image we need a pblx (self extracting barebox binary) with +# start_imx51_babbage as entrypoint. start_imx51_babbage will be used +# both as entrypoint and as filename +# + +quiet_cmd_objcopy_bin = OBJCOPYB $@ + cmd_objcopy_bin = $(OBJCOPY) -O binary $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ + +pbl-lds := $(obj)/pbl.lds +extra-y += $(pbl-lds) + +$(pbl-lds): $(obj)/../arch/$(ARCH)/lib/pbl.lds.S FORCE + $(call if_changed_dep,cpp_lds_S) + +quiet_cmd_elf__ ?= LD $@ + cmd_elf__ ?= $(LD) $(LDFLAGS) -static --gc-sections -pie \ + -e $(2) -Map $@.map $(LDFLAGS_$(@F)) -o $@ \ + -T $(pbl-lds) \ + --start-group $(barebox-pbl-common) --end-group + +PBL_CPPFLAGS += -fdata-sections -ffunction-sections + +$(obj)/%.pbl: $(pbl-lds) $(barebox-pbl-common) FORCE + $(call if_changed,elf__,$(*F)) + +$(obj)/%.pblb: $(obj)/%.pbl FORCE + $(call if_changed,objcopy_bin,$(*F)) + +quiet_cmd_pblx ?= PBLX $@ + cmd_pblx ?= cat $(obj)/$(patsubst %.pblx,%.pblb,$(2)) > $@; \ + $(call size_append, $(obj)/barebox.x) >> $@; \ + cat $(obj)/barebox.x >> $@ + +$(obj)/%.pblx: $(obj)/%.pblb $(obj)/barebox.x FORCE + $(call if_changed,pblx,$(@F)) + +$(obj)/%.s: $(obj)/% FORCE + $(call if_changed,disasm) + +suffix_$(CONFIG_IMAGE_COMPRESSION_GZIP) = gzip +suffix_$(CONFIG_IMAGE_COMPRESSION_LZO) = lzo +suffix_$(CONFIG_IMAGE_COMPRESSION_NONE) = shipped + +# barebox.z - compressed barebox binary +# ---------------------------------------------------------------- +$(obj)/barebox.z: $(obj)/../barebox.bin FORCE + $(call if_changed,$(suffix_y)) + +quiet_cmd_selfextract = COMP $@ + cmd_selfextract = cat $(obj)/start_uncompress.pblb > $@; \ + $(call size_append, $<) >> $@; \ + cat $< >> $@ + +pblx-y += start_uncompress +# barebox.x - self extracting barebox binary +# ---------------------------------------------------------------- +$(obj)/barebox.x: $(obj)/barebox.z $(obj)/start_uncompress.pblb FORCE + $(call if_changed,selfextract) + +# %.img - create a copy from another file +# ---------------------------------------------------------------- +.SECONDEXPANSION: +$(obj)/%.img: $(obj)/$$(FILE_$$(@F)) + $(Q)if [ -z $(FILE_$(@F)) ]; then echo "FILE_$(@F) empty!"; false; fi + $(call if_changed,shipped) + +targets += $(image-y) pbl.lds barebox.x barebox.z +targets += $(patsubst %,%.pblx,$(pblx-y)) +targets += $(patsubst %,%.pblb,$(pblx-y)) +targets += $(patsubst %,%.pbl,$(pblx-y)) +targets += $(patsubst %,%.s,$(pblx-y)) +targets += $(imximage-y) + +SECONDARY: $(addprefix $(obj)/,$(targets)) + +images: $(addprefix $(obj)/, $(image-y)) FORCE + @echo "images built:\n" $(patsubst %,%\\n,$(image-y)) + +clean-files := *.pbl *.pblb *.pblx *.map start_*.imximg *.img barebox.z +clean-files += pbl.lds diff --git a/pbl/Kconfig b/pbl/Kconfig index 5c7f62e..a37c976 100644 --- a/pbl/Kconfig +++ b/pbl/Kconfig @@ -1,6 +1,9 @@ config HAVE_PBL_IMAGE bool +config HAVE_PBL_MULTI_IMAGES + bool + config HAVE_IMAGE_COMPRESSION bool @@ -8,6 +11,19 @@ config PBL_IMAGE bool "Pre-Bootloader image" depends on HAVE_PBL_IMAGE +config PBL_MULTI_IMAGES + bool + select PBL_IMAGE + select PBL_RELOCATABLE + depends on HAVE_PBL_MULTI_IMAGES + default y + +config PBL_SINGLE_IMAGE + bool + depends on PBL_IMAGE + depends on !HAVE_PBL_MULTI_IMAGES + default y + config PBL_FORCE_PIGGYDATA_COPY bool help -- 1.8.3.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox