From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH 3/8] ppc 8xxx: DDR headers
Date: Tue, 25 Jun 2013 11:45:32 +0100 [thread overview]
Message-ID: <1372157137-7602-4-git-send-email-renaud.barbier@ge.com> (raw)
In-Reply-To: <1370019244-7873-1-git-send-email-renaud.barbier@ge.com>
Structures are defined to record the common DIMM parameters
and memory options on a per DIMM basis.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
---
arch/ppc/ddr-8xxx/common_timing_params.h | 44 ++++++++++++
arch/ppc/ddr-8xxx/ddr.h | 105 ++++++++++++++++++++++++++++++
2 files changed, 149 insertions(+), 0 deletions(-)
create mode 100644 arch/ppc/ddr-8xxx/common_timing_params.h
create mode 100644 arch/ppc/ddr-8xxx/ddr.h
diff --git a/arch/ppc/ddr-8xxx/common_timing_params.h b/arch/ppc/ddr-8xxx/common_timing_params.h
new file mode 100644
index 0000000..b262193
--- /dev/null
+++ b/arch/ppc/ddr-8xxx/common_timing_params.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef COMMON_TIMING_PARAMS_H
+#define COMMON_TIMING_PARAMS_H
+
+struct common_timing_params_s {
+ uint32_t tCKmin_X_ps;
+ uint32_t tCKmax_ps;
+ uint32_t tCKmax_max_ps;
+ uint32_t tRCD_ps;
+ uint32_t tRP_ps;
+ uint32_t tRAS_ps;
+ uint32_t tWR_ps; /* maximum = 63750 ps */
+ uint32_t tWTR_ps; /* maximum = 63750 ps */
+ uint32_t tRFC_ps; /* maximum = 255 ns + 256 ns + .75 ns
+ = 511750 ps */
+ uint32_t tRRD_ps; /* maximum = 63750 ps */
+ uint32_t tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
+ uint32_t refresh_rate_ps;
+ uint32_t tIS_ps; /* byte 32, spd->ca_setup */
+ uint32_t tIH_ps; /* byte 33, spd->ca_hold */
+ uint32_t tDS_ps; /* byte 34, spd->data_setup */
+ uint32_t tDH_ps; /* byte 35, spd->data_hold */
+ uint32_t tRTP_ps; /* byte 38, spd->trtp */
+ uint32_t tDQSQ_max_ps; /* byte 44, spd->tdqsq */
+ uint32_t tQHS_ps; /* byte 45, spd->tqhs */
+ uint32_t ndimms_present;
+ uint32_t lowest_common_SPD_caslat;
+ uint32_t highest_common_derated_caslat;
+ uint32_t additive_latency;
+ uint32_t all_DIMMs_burst_lengths_bitmask;
+ uint32_t all_DIMMs_registered;
+ uint32_t all_DIMMs_ECC_capable;
+ uint64_t total_mem;
+ uint64_t base_address;
+};
+
+#endif
diff --git a/arch/ppc/ddr-8xxx/ddr.h b/arch/ppc/ddr-8xxx/ddr.h
new file mode 100644
index 0000000..6574500
--- /dev/null
+++ b/arch/ppc/ddr-8xxx/ddr.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013 GE Intelligent Platforms, Inc
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef FSL_DDR_MAIN_H
+#define FSL_DDR_MAIN_H
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <mach/fsl_i2c.h>
+#include <mach/clock.h>
+#include "common_timing_params.h"
+
+#ifdef CONFIG_MPC85xx
+#include <mach/immap_85xx.h>
+#endif
+
+/* Record of computed register values. */
+struct fsl_ddr_cfg_regs_s {
+ struct {
+ uint32_t bnds;
+ uint32_t config;
+ uint32_t config_2;
+ } cs[MAX_CHIP_SELECTS_PER_CTRL];
+ uint32_t timing_cfg_3;
+ uint32_t timing_cfg_0;
+ uint32_t timing_cfg_1;
+ uint32_t timing_cfg_2;
+ uint32_t ddr_sdram_cfg;
+ uint32_t ddr_sdram_cfg_2;
+ uint32_t ddr_sdram_mode;
+ uint32_t ddr_sdram_mode_2;
+ uint32_t ddr_sdram_mode_3;
+ uint32_t ddr_sdram_mode_4;
+ uint32_t ddr_sdram_mode_5;
+ uint32_t ddr_sdram_mode_6;
+ uint32_t ddr_sdram_mode_7;
+ uint32_t ddr_sdram_mode_8;
+ uint32_t ddr_sdram_md_cntl;
+ uint32_t ddr_sdram_interval;
+ uint32_t ddr_data_init;
+ uint32_t ddr_sdram_clk_cntl;
+ uint32_t ddr_init_addr;
+ uint32_t ddr_init_ext_addr;
+ uint32_t err_disable;
+ uint32_t err_int_en;
+ uint32_t debug[32];
+};
+
+/*
+ * Data Structures
+ *
+ * All data structures have to be on the stack
+ */
+struct fsl_ddr_info_s {
+ generic_spd_eeprom_t
+ spd_installed_dimms[MAX_DIMM_SLOTS_PER_CTLR];
+ struct dimm_params_s
+ dimm_params[MAX_DIMM_SLOTS_PER_CTLR];
+ struct memctl_options_s memctl_opts;
+ struct common_timing_params_s common_timing_params;
+ struct fsl_ddr_cfg_regs_s fsl_ddr_config_reg;
+ struct ddr_board_info_s board_info;
+};
+
+uint32_t mclk_to_picos(uint32_t mclk);
+uint32_t get_memory_clk_period_ps(void);
+uint32_t picos_to_mclk(uint32_t picos);
+uint32_t check_fsl_memctl_config_regs(const struct fsl_ddr_cfg_regs_s *ddr);
+uint64_t fsl_ddr_compute(struct fsl_ddr_info_s *pinfo);
+uint32_t compute_fsl_memctl_config_regs(
+ const struct memctl_options_s *popts,
+ struct fsl_ddr_cfg_regs_s *ddr,
+ const struct common_timing_params_s *common_dimm,
+ const struct dimm_params_s *dimm_parameters,
+ uint32_t dbw_capacity_adjust);
+uint32_t compute_dimm_parameters(
+ const generic_spd_eeprom_t *spdin,
+ struct dimm_params_s *pdimm);
+uint32_t compute_lowest_common_dimm_parameters(
+ const struct dimm_params_s *dimm_params,
+ struct common_timing_params_s *outpdimm,
+ uint32_t number_of_dimms);
+uint32_t populate_memctl_options(
+ int all_DIMMs_registered,
+ struct memctl_options_s *popts,
+ struct dimm_params_s *pdimm);
+int fsl_ddr_set_lawbar(
+ const struct common_timing_params_s *memctl_common_params,
+ uint32_t memctl_interleaved);
+int fsl_ddr_get_spd(
+ generic_spd_eeprom_t *ctrl_dimms_spd,
+ struct ddr_board_info_s *binfo);
+int fsl_ddr_set_memctl_regs(
+ const struct fsl_ddr_info_s *info);
+void fsl_ddr_board_options(
+ struct memctl_options_s *popts,
+ struct dimm_params_s *pdimm);
+void fsl_ddr_board_info(struct ddr_board_info_s *info);
+#endif
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-06-25 10:46 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-31 16:53 [PATCH 0/8] U-Boot DDR initialisation import Renaud Barbier
2013-05-31 16:53 ` [PATCH 1/8] ppc 8xxx: DDR headers Renaud Barbier
2013-05-31 16:53 ` [PATCH 2/8] ppc 8xxx: memory controller register manipulation functions Renaud Barbier
2013-05-31 16:53 ` [PATCH 3/8] ppc 8xxx: dimm parameters calculation Renaud Barbier
2013-05-31 16:54 ` [PATCH 4/8] ppc 8xxx: lowest common dimm parameters Renaud Barbier
2013-05-31 16:54 ` [PATCH 5/8] ppc 8xxx: DDR utility functions Renaud Barbier
2013-05-31 16:54 ` [PATCH 6/8] ppc 8xxx: DDR specific options Renaud Barbier
2013-05-31 16:54 ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-02 15:44 ` Sascha Hauer
2013-06-12 14:51 ` Renaud Barbier
2013-05-31 16:54 ` [PATCH 8/8] ppc 8xxx: remove interactive debugging Renaud Barbier
2013-06-25 10:45 ` [PATCH v2 0/8] DDR2 memory initialisaion Renaud Barbier
2013-06-26 6:34 ` Sascha Hauer
2013-06-26 17:33 ` [PATCH v3 0/8] DDR2 memory initialisation Renaud Barbier
2013-06-27 6:39 ` Sascha Hauer
2013-06-26 17:33 ` [PATCH 1/8] common: DDR2 SPD checksum Renaud Barbier
2013-06-26 17:33 ` [PATCH 2/8] ppc asm: DDR headers Renaud Barbier
2013-06-26 17:33 ` [PATCH 3/8] ppc 8xxx: " Renaud Barbier
2013-06-26 17:33 ` [PATCH 4/8] ppc 8xxx: DIMM parameters calculation Renaud Barbier
2013-06-26 17:33 ` [PATCH 5/8] ppc 8xxx: DDR utility and memory options Renaud Barbier
2013-06-26 17:33 ` [PATCH 6/8] ppx 8xxx: DDR registers value calculation Renaud Barbier
2013-06-26 17:33 ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-26 17:33 ` [PATCH 8/8] ppc 85xx: early I2C support Renaud Barbier
2013-06-25 10:45 ` [PATCH 1/8] common: DDR2 SPD checksum Renaud Barbier
2013-06-26 6:26 ` Sascha Hauer
2013-06-25 10:45 ` [PATCH 2/8] ppc asm: DDR headers Renaud Barbier
2013-06-25 10:45 ` Renaud Barbier [this message]
2013-06-25 10:45 ` [PATCH 4/8] ppc 8xxx: DIMM parameters calculation Renaud Barbier
2013-06-25 10:45 ` [PATCH 5/8] ppc 8xxx: DDR utility and memory options Renaud Barbier
2013-06-25 10:45 ` [PATCH 6/8] ppx 8xxx: DDR registers value calculation Renaud Barbier
2013-06-25 10:45 ` [PATCH 7/8] ppc 8xxx: core DDR driver functions Renaud Barbier
2013-06-25 10:45 ` [PATCH 8/8] ppc 85xx: early I2C support Renaud Barbier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372157137-7602-4-git-send-email-renaud.barbier@ge.com \
--to=renaud.barbier@ge.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox