[PATCH 08/12] PCM051: Add first stage support

["Teresa Gámez" <t.gamez@phytec.de>]

From: Shravan kumar <shravan.k@phytec.in>

This patch adds first stage support for PCM051.

Signed-off-by: Shravan kumar <shravan.k@phytec.in>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 arch/arm/boards/pcm051/board.c                   |    1 +
 arch/arm/boards/pcm051/env/boot/sd               |    2 +-
 arch/arm/boards/pcm051/lowlevel.c                |  206 ++++++++++++++++++++++
 arch/arm/configs/pcm051_mlo_defconfig            |   33 ++++
 arch/arm/mach-omap/include/mach/am33xx-silicon.h |   11 ++
 5 files changed, 252 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/configs/pcm051_mlo_defconfig

diff --git a/arch/arm/boards/pcm051/board.c b/arch/arm/boards/pcm051/board.c
index 8701596..6ef1f4b 100644
--- a/arch/arm/boards/pcm051/board.c
+++ b/arch/arm/boards/pcm051/board.c
@@ -49,6 +49,7 @@
  */
 static int pcm051_console_init(void)
 {
+	am33xx_enable_uart0_pin_mux();
 	/* Register the serial port */
 	am33xx_add_uart0();
 
diff --git a/arch/arm/boards/pcm051/env/boot/sd b/arch/arm/boards/pcm051/env/boot/sd
index f303c10..93a2357 100644
--- a/arch/arm/boards/pcm051/env/boot/sd
+++ b/arch/arm/boards/pcm051/env/boot/sd
@@ -6,5 +6,5 @@ if [ "$1" = menu ]; then
 fi
 
 global.bootm.image=/boot/uImage
-global.bootm.oftree=/boot/oftree
+#global.bootm.oftree=/boot/oftree
 global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
diff --git a/arch/arm/boards/pcm051/lowlevel.c b/arch/arm/boards/pcm051/lowlevel.c
index c2a367d..44c5a3a 100644
--- a/arch/arm/boards/pcm051/lowlevel.c
+++ b/arch/arm/boards/pcm051/lowlevel.c
@@ -1,11 +1,217 @@
 #include <common.h>
 #include <sizes.h>
+#include <io.h>
+#include <init.h>
 #include <asm/barebox-arm-head.h>
 #include <asm/barebox-arm.h>
+#include <mach/am33xx-silicon.h>
+#include <mach/am33xx-clock.h>
+#include <mach/sdrc.h>
+#include <mach/sys_info.h>
+#include <mach/syslib.h>
+#include <mach/am33xx-mux.h>
+#include <mach/wdt.h>
+
+/* UART Defines */
+#define UART_SYSCFG_OFFSET  (0x54)
+#define UART_SYSSTS_OFFSET  (0x58)
+
+#define UART_RESET      (0x1 << 1)
+#define UART_CLK_RUNNING_MASK   0x1
+#define UART_SMART_IDLE_EN  (0x1 << 0x3)
+
+/* AM335X EMIF Register values */
+#define VTP_CTRL_READY          (0x1 << 5)
+#define VTP_CTRL_ENABLE         (0x1 << 6)
+#define VTP_CTRL_START_EN       (0x1)
+#define CMD_FORCE              0x00    /* common #def */
+#define CMD_DELAY              0x00
+
+#define EMIF_READ_LATENCY       0x06
+#define EMIF_SDCFG              0x61C04832 /* CL 5, CWL 5 */
+#define EMIF_SDREF              0x0000093B
+
+#define EMIF_TIM1               0x0668A39B
+#define EMIF_TIM2               0x26337FDA
+#define EMIF_TIM3               0x501F830F
+
+#define DLL_LOCK_DIFF           0x0
+#define PHY_WR_DATA             0xC1
+#define RD_DQS                  0x3B
+#define WR_DQS                  0x85
+#define PHY_FIFO_WE             0x100
+#define INVERT_CLKOUT           0x1
+#define PHY_RANK0_DELAY         0x01
+#define DDR_IOCTRL_VALUE        0x18B
+#define CTRL_SLAVE_RATIO        0x40
+#define PHY_LVL_MODE            0x1
+#define DDR_ZQ_CFG              0x50074BE4
+
+static void Cmd_Macro_Config(void)
+{
+	writel(CTRL_SLAVE_RATIO, AM33XX_CMD0_CTRL_SLAVE_RATIO_0);
+	writel(CMD_FORCE, AM33XX_CMD0_CTRL_SLAVE_FORCE_0);
+	writel(CMD_DELAY, AM33XX_CMD0_CTRL_SLAVE_DELAY_0);
+	writel(DLL_LOCK_DIFF, AM33XX_CMD0_DLL_LOCK_DIFF_0);
+	writel(INVERT_CLKOUT, AM33XX_CMD0_INVERT_CLKOUT_0);
+
+	writel(CTRL_SLAVE_RATIO, AM33XX_CMD1_CTRL_SLAVE_RATIO_0);
+	writel(CMD_FORCE, AM33XX_CMD1_CTRL_SLAVE_FORCE_0);
+	writel(CMD_DELAY, AM33XX_CMD1_CTRL_SLAVE_DELAY_0);
+	writel(DLL_LOCK_DIFF, AM33XX_CMD1_DLL_LOCK_DIFF_0);
+	writel(INVERT_CLKOUT, AM33XX_CMD1_INVERT_CLKOUT_0);
+
+	writel(CTRL_SLAVE_RATIO, AM33XX_CMD2_CTRL_SLAVE_RATIO_0);
+	writel(CMD_FORCE, AM33XX_CMD2_CTRL_SLAVE_FORCE_0);
+	writel(CMD_DELAY, AM33XX_CMD2_CTRL_SLAVE_DELAY_0);
+	writel(DLL_LOCK_DIFF, AM33XX_CMD2_DLL_LOCK_DIFF_0);
+	writel(INVERT_CLKOUT, AM33XX_CMD2_INVERT_CLKOUT_0);
+}
+
+static void config_vtp(void)
+{
+	writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_ENABLE,
+			AM33XX_VTP0_CTRL_REG);
+	writel(readl(AM33XX_VTP0_CTRL_REG) & (~VTP_CTRL_START_EN),
+			AM33XX_VTP0_CTRL_REG);
+	writel(readl(AM33XX_VTP0_CTRL_REG) | VTP_CTRL_START_EN,
+			AM33XX_VTP0_CTRL_REG);
+
+	/* Poll for READY */
+	while ((readl(AM33XX_VTP0_CTRL_REG) &
+			VTP_CTRL_READY) != VTP_CTRL_READY);
+}
+
+static void phy_config_data(void)
+{
+	writel(RD_DQS, AM33XX_DATA0_RD_DQS_SLAVE_RATIO_0);
+	writel(WR_DQS, AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0);
+	writel(PHY_FIFO_WE, AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0);
+	writel(PHY_WR_DATA, AM33XX_DATA0_WR_DATA_SLAVE_RATIO_0);
+
+	writel(RD_DQS, AM33XX_DATA1_RD_DQS_SLAVE_RATIO_0);
+	writel(WR_DQS, AM33XX_DATA1_WR_DQS_SLAVE_RATIO_0);
+	writel(PHY_FIFO_WE, AM33XX_DATA1_FIFO_WE_SLAVE_RATIO_0);
+	writel(PHY_WR_DATA, AM33XX_DATA1_WR_DATA_SLAVE_RATIO_0);
+}
+
+static void config_emif(void)
+{
+	/*Program EMIF0 CFG Registers*/
+	writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1));
+	writel(EMIF_READ_LATENCY,
+				AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_1_SHADOW));
+	writel(EMIF_READ_LATENCY, AM33XX_EMIF4_0_REG(DDR_PHY_CTRL_2));
+	writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1));
+	writel(EMIF_TIM1, AM33XX_EMIF4_0_REG(SDRAM_TIM_1_SHADOW));
+	writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2));
+	writel(EMIF_TIM2, AM33XX_EMIF4_0_REG(SDRAM_TIM_2_SHADOW));
+	writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3));
+	writel(EMIF_TIM3, AM33XX_EMIF4_0_REG(SDRAM_TIM_3_SHADOW));
+
+	writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL));
+	writel(EMIF_SDREF, AM33XX_EMIF4_0_REG(SDRAM_REF_CTRL_SHADOW));
+
+	writel(EMIF_SDCFG, AM33XX_EMIF4_0_REG(SDRAM_CONFIG));
+	writel(DDR_ZQ_CFG, AM33XX_EMIF4_0_REG(ZQ_CONFIG));
+
+	while ((readl(AM33XX_EMIF4_0_REG(SDRAM_STATUS)) & 0x4) != 0x4);
+}
+
+static void pcm051_config_ddr(void)
+{
+	enable_ddr_clocks();
+
+	config_vtp();
+
+	/* init mode */
+	writel(PHY_LVL_MODE, AM33XX_DATA0_WRLVL_INIT_MODE_0);
+	writel(PHY_LVL_MODE, AM33XX_DATA0_GATELVL_INIT_MODE_0);
+	writel(PHY_LVL_MODE, AM33XX_DATA1_WRLVL_INIT_MODE_0);
+	writel(PHY_LVL_MODE, AM33XX_DATA1_GATELVL_INIT_MODE_0);
+
+	Cmd_Macro_Config();
+	phy_config_data();
+
+	writel(PHY_RANK0_DELAY, AM33XX_DATA0_RANK0_DELAYS_0);
+	writel(PHY_RANK0_DELAY, AM33XX_DATA1_RANK0_DELAYS_0);
+
+	writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD0_IOCTRL);
+	writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD1_IOCTRL);
+	writel(DDR_IOCTRL_VALUE, AM33XX_DDR_CMD2_IOCTRL);
+	writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA0_IOCTRL);
+	writel(DDR_IOCTRL_VALUE, AM33XX_DDR_DATA1_IOCTRL);
+
+	writel(readl(AM33XX_DDR_IO_CTRL) &
+				0xefffffff, AM33XX_DDR_IO_CTRL);
+	writel(readl(AM33XX_DDR_CKE_CTRL) |
+				0x00000001, AM33XX_DDR_CKE_CTRL);
+
+	config_emif();
+}
+
+/*
+ * early system init of muxing and clocks.
+ */
+void pcm051_sram_init(void)
+{
+	u32 regVal, uart_base;
+
+	/* Setup the PLLs and the clocks for the peripherals */
+	pll_init();
+
+	pcm051_config_ddr();
+
+	/* UART softreset */
+	am33xx_enable_uart0_pin_mux();
+	uart_base = AM33XX_UART0_BASE;
+
+	regVal = readl(uart_base + UART_SYSCFG_OFFSET);
+	regVal |= UART_RESET;
+	writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
+	while ((readl(uart_base + UART_SYSSTS_OFFSET) &
+		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK);
+
+	/* Disable smart idle */
+	regVal = readl((uart_base + UART_SYSCFG_OFFSET));
+	regVal |= UART_SMART_IDLE_EN;
+	writel(regVal, (uart_base + UART_SYSCFG_OFFSET));
+}
+
+/**
+ * @brief The basic entry point for board initialization.
+ *
+ * This is called as part of machine init (after arch init).
+ * This is again called with stack in SRAM, so not too many
+ * constructs possible here.
+ *
+ * @return void
+ */
+static int pcm051_board_init(void)
+{
+	int in_sdram = running_in_sdram();
+
+	/* WDT1 is already running when the bootloader gets control
+	 * Disable it to avoid "random" resets
+	 */
+	writel(WDT_DISABLE_CODE1, AM33XX_WDT_REG(WSPR));
+	while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+
+	writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR));
+	while (readl(AM33XX_WDT_REG(WWPS)) != 0x0);
+
+	/* Dont reconfigure SDRAM while running in SDRAM! */
+	if (!in_sdram)
+		pcm051_sram_init();
+
+	return 0;
+}
 
 void __naked barebox_arm_reset_vector(void)
 {
 	arm_cpu_lowlevel_init();
 
+	pcm051_board_init();
+
 	barebox_arm_entry(0x80000000, SZ_512M, 0);
 }
diff --git a/arch/arm/configs/pcm051_mlo_defconfig b/arch/arm/configs/pcm051_mlo_defconfig
new file mode 100644
index 0000000..f97a7c7
--- /dev/null
+++ b/arch/arm/configs/pcm051_mlo_defconfig
@@ -0,0 +1,33 @@
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_AM33XX=y
+CONFIG_OMAP_BUILD_IFT=y
+CONFIG_MACH_PCM051=y
+CONFIG_OMAP_UART1=y
+CONFIG_THUMB2_BAREBOX=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+# CONFIG_BANNER is not set
+# CONFIG_MEMINFO is not set
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_MMU=y
+CONFIG_TEXT_BASE=0x402F0400
+CONFIG_STACK_SIZE=0x1600
+CONFIG_MALLOC_SIZE=0x1000000
+CONFIG_PROMPT="MLO>"
+CONFIG_SHELL_NONE=y
+# CONFIG_ERRNO_MESSAGES is not set
+# CONFIG_TIMESTAMP is not set
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
+CONFIG_DRIVER_SPI_OMAP3=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_NAND=y
+CONFIG_NAND_OMAP_GPMC=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_OMAP_HSMMC=y
+# CONFIG_FS_RAMFS is not set
+# CONFIG_FS_DEVFS is not set
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_LFN=y
diff --git a/arch/arm/mach-omap/include/mach/am33xx-silicon.h b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
index 8a7bd16..a93ed13 100644
--- a/arch/arm/mach-omap/include/mach/am33xx-silicon.h
+++ b/arch/arm/mach-omap/include/mach/am33xx-silicon.h
@@ -105,6 +105,7 @@
 #define EMIF4_SDRAM_TIM_3_SHADOW	0x2C
 #define EMIF0_SDRAM_MGMT_CTRL		0x38
 #define EMIF0_SDRAM_MGMT_CTRL_SHD	0x3C
+#define EMIF4_ZQ_CONFIG			0xC8
 #define EMIF4_DDR_PHY_CTRL_1		0xE4
 #define EMIF4_DDR_PHY_CTRL_1_SHADOW	0xE8
 #define EMIF4_DDR_PHY_CTRL_2		0xEC
@@ -153,13 +154,20 @@
 #define AM33XX_DATA0_RD_DQS_SLAVE_RATIO_1	(AM33XX_DDR_PHY_BASE_ADDR + 0x0CC)
 #define	AM33XX_DATA0_WR_DQS_SLAVE_RATIO_0	(AM33XX_DDR_PHY_BASE_ADDR + 0x0DC)
 
+#define	AM33XX_DATA1_RD_DQS_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x16C)
+#define	AM33XX_DATA1_WR_DQS_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x180)
+#define	AM33XX_DATA1_FIFO_WE_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x1AC)
+#define	AM33XX_DATA1_WR_DATA_SLAVE_RATIO_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x1C4)
+
 #define	AM33XX_DATA0_WR_DQS_SLAVE_RATIO_1	(AM33XX_DDR_PHY_BASE_ADDR + 0x0E0)
 #define	AM33XX_DATA0_WRLVL_INIT_RATIO_0		(AM33XX_DDR_PHY_BASE_ADDR + 0x0F0)
 
 #define	AM33XX_DATA0_WRLVL_INIT_RATIO_1		(AM33XX_DDR_PHY_BASE_ADDR + 0x0F4)
+#define	AM33XX_DATA0_WRLVL_INIT_MODE_0	(AM33XX_DDR_PHY_BASE_ADDR + 0x0F8)
 #define	AM33XX_DATA0_GATELVL_INIT_RATIO_0	(AM33XX_DDR_PHY_BASE_ADDR + 0x0FC)
 
 #define	AM33XX_DATA0_GATELVL_INIT_RATIO_1	(AM33XX_DDR_PHY_BASE_ADDR + 0x100)
+#define	AM33XX_DATA0_GATELVL_INIT_MODE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x104)
 #define	AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_0	(AM33XX_DDR_PHY_BASE_ADDR + 0x108)
 
 #define	AM33XX_DATA0_FIFO_WE_SLAVE_RATIO_1	(AM33XX_DDR_PHY_BASE_ADDR + 0x10C)
@@ -171,6 +179,9 @@
 #define AM33XX_DATA0_RANK0_DELAYS_0		(AM33XX_DDR_PHY_BASE_ADDR + 0x134)
 #define	AM33XX_DATA1_RANK0_DELAYS_0		(AM33XX_DDR_PHY_BASE_ADDR + 0x1D8)
 
+#define	AM33XX_DATA1_WRLVL_INIT_MODE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x19C)
+#define	AM33XX_DATA1_GATELVL_INIT_MODE_0 (AM33XX_DDR_PHY_BASE_ADDR + 0x1A8)
+
 /* Ethernet MAC ID from EFuse */
 #define AM33XX_MAC_ID0_LO	(AM33XX_CTRL_BASE + 0x630)
 #define AM33XX_MAC_ID0_HI	(AM33XX_CTRL_BASE + 0x634)
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox