From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/4] ARM: omap4: Use writel where appropriate
Date: Mon, 22 Jul 2013 11:56:22 +0200 [thread overview]
Message-ID: <1374486983-5263-4-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1374486983-5263-1-git-send-email-s.hauer@pengutronix.de>
Instead of making a pure 32bit write to a read/modify/write
operation with sr32 use writel directly. This saves a few bytes
of binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-omap/omap4_clock.c | 176 +++++++++++++++++++--------------------
1 file changed, 88 insertions(+), 88 deletions(-)
diff --git a/arch/arm/mach-omap/omap4_clock.c b/arch/arm/mach-omap/omap4_clock.c
index 889d1f9..268f7c1 100644
--- a/arch/arm/mach-omap/omap4_clock.c
+++ b/arch/arm/mach-omap/omap4_clock.c
@@ -89,7 +89,7 @@ void omap4_configure_per_dpll(const struct dpll_param *dpll_param)
void omap4_configure_abe_dpll(const struct dpll_param *dpll_param)
{
/* Select sys_clk as ref clk for ABE dpll */
- sr32(CM_ABE_PLL_REF_CLKSEL, 0, 32, 0x0);
+ writel(CM_ABE_PLL_REF_CLKSEL, 0x0);
/* Unlock the ABE dpll */
sr32(CM_CLKMODE_DPLL_ABE, 0, 3, PLL_MN_POWER_BYPASS);
@@ -102,11 +102,11 @@ void omap4_configure_abe_dpll(const struct dpll_param *dpll_param)
sr32(CM_CLKSEL_DPLL_ABE, 0, 6, dpll_param->n);
/* Force DPLL CLKOUTHIF to stay enabled */
- sr32(CM_DIV_M2_DPLL_ABE, 0, 32, 0x500);
+ writel(CM_DIV_M2_DPLL_ABE, 0x500);
sr32(CM_DIV_M2_DPLL_ABE, 0, 5, dpll_param->m2);
sr32(CM_DIV_M2_DPLL_ABE, 8, 1, 0x1);
/* Force DPLL CLKOUTHIF to stay enabled */
- sr32(CM_DIV_M3_DPLL_ABE, 0, 32, 0x100);
+ writel(CM_DIV_M3_DPLL_ABE, 0x100);
sr32(CM_DIV_M3_DPLL_ABE, 0, 5, dpll_param->m3);
sr32(CM_DIV_M3_DPLL_ABE, 8, 1, 0x1);
@@ -120,7 +120,7 @@ void omap4_configure_abe_dpll(const struct dpll_param *dpll_param)
void omap4_configure_usb_dpll(const struct dpll_param *dpll_param)
{
/* Select the 60Mhz clock 480/8 = 60*/
- sr32(CM_CLKSEL_USB_60MHz, 0, 32, 0x1);
+ writel(CM_CLKSEL_USB_60MHz, 0x1);
/* Unlock the USB dpll */
sr32(CM_CLKMODE_DPLL_USB, 0, 3, PLL_MN_POWER_BYPASS);
@@ -133,7 +133,7 @@ void omap4_configure_usb_dpll(const struct dpll_param *dpll_param)
sr32(CM_CLKSEL_DPLL_USB, 0, 6, dpll_param->n);
/* Force DPLL CLKOUT to stay active */
- sr32(CM_DIV_M2_DPLL_USB, 0, 32, 0x100);
+ writel(CM_DIV_M2_DPLL_USB, 0x100);
sr32(CM_DIV_M2_DPLL_USB, 0, 5, dpll_param->m2);
sr32(CM_DIV_M2_DPLL_USB, 8, 1, 0x1);
sr32(CM_CLKDCOLDO_DPLL_USB, 8, 1, 0x1);
@@ -143,7 +143,7 @@ void omap4_configure_usb_dpll(const struct dpll_param *dpll_param)
wait_on_value((1 << 0), 1, CM_IDLEST_DPLL_USB, LDELAY);
/* force enable the CLKDCOLDO clock */
- sr32(CM_CLKDCOLDO_DPLL_USB, 0, 32, 0x100);
+ writel(CM_CLKDCOLDO_DPLL_USB, 0x100);
return;
}
@@ -151,7 +151,7 @@ void omap4_configure_usb_dpll(const struct dpll_param *dpll_param)
void omap4_configure_core_dpll_no_lock(const struct dpll_param *param)
{
/* CORE_CLK=CORE_X2_CLK/2, L3_CLK=CORE_CLK/2, L4_CLK=L3_CLK/2 */
- sr32(CM_CLKSEL_CORE, 0, 32, 0x110);
+ writel(CM_CLKSEL_CORE, 0x110);
/* Unlock the CORE dpll */
sr32(CM_CLKMODE_DPLL_CORE, 0, 3, PLL_MN_POWER_BYPASS);
@@ -205,107 +205,107 @@ void omap4_lock_core_dpll_shadow(const struct dpll_param *param)
void omap4_enable_gpio_clocks(void)
{
- sr32(CM_L4PER_GPIO2_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L4PER_GPIO2_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO3_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L4PER_GPIO3_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO4_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L4PER_GPIO4_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO4_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO5_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L4PER_GPIO5_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO5_CLKCTRL, LDELAY);
- sr32(CM_L4PER_GPIO6_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L4PER_GPIO6_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_GPIO6_CLKCTRL, LDELAY);
}
void omap4_enable_gpio1_wup_clocks(void)
{
/* WKUP clocks */
- sr32(CM_WKUP_GPIO1_CLKCTRL, 0, 32, 0x1);
+ writel(CM_WKUP_GPIO1_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_GPIO1_CLKCTRL, LDELAY);
}
void omap4_enable_all_clocks(void)
{
/* Enable Ducati clocks */
- sr32(CM_DUCATI_DUCATI_CLKCTRL, 0, 32, 0x1);
- sr32(CM_DUCATI_CLKSTCTRL, 0, 32, 0x2);
+ writel(CM_DUCATI_DUCATI_CLKCTRL, 0x1);
+ writel(CM_DUCATI_CLKSTCTRL, 0x2);
wait_on_value((1 << 8), (1 << 8), CM_DUCATI_CLKSTCTRL, LDELAY);
/* Enable ivahd and sl2 clocks */
- sr32(IVAHD_IVAHD_CLKCTRL, 0, 32, 0x1);
- sr32(IVAHD_SL2_CLKCTRL, 0, 32, 0x1);
- sr32(IVAHD_CLKSTCTRL, 0, 32, 0x2);
+ writel(IVAHD_IVAHD_CLKCTRL, 0x1);
+ writel(IVAHD_SL2_CLKCTRL, 0x1);
+ writel(IVAHD_CLKSTCTRL, 0x2);
wait_on_value((1 << 8), (1 << 8), IVAHD_CLKSTCTRL, LDELAY);
/* Enable Tesla clocks */
- sr32(DSP_DSP_CLKCTRL, 0, 32, 0x1);
- sr32(DSP_CLKSTCTRL, 0, 32, 0x2);
+ writel(DSP_DSP_CLKCTRL, 0x1);
+ writel(DSP_CLKSTCTRL, 0x2);
wait_on_value((1 << 8), (1 << 8), DSP_CLKSTCTRL, LDELAY);
/* wait for tesla to become accessible */
/* ABE clocks */
- sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x3);
- sr32(CM1_ABE_AESS_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_PDM_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_DMIC_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_MCASP_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_MCBSP1_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_MCBSP2_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_MCBSP3_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_SLIMBUS_CLKCTRL, 0, 32, 0xf02);
- sr32(CM1_ABE_TIMER5_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_TIMER6_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_TIMER7_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_TIMER8_CLKCTRL, 0, 32, 0x2);
- sr32(CM1_ABE_WDT3_CLKCTRL, 0, 32, 0x2);
+ writel(CM1_ABE_CLKSTCTRL, 0x3);
+ writel(CM1_ABE_AESS_CLKCTRL, 0x2);
+ writel(CM1_ABE_PDM_CLKCTRL, 0x2);
+ writel(CM1_ABE_DMIC_CLKCTRL, 0x2);
+ writel(CM1_ABE_MCASP_CLKCTRL, 0x2);
+ writel(CM1_ABE_MCBSP1_CLKCTRL, 0x2);
+ writel(CM1_ABE_MCBSP2_CLKCTRL, 0x2);
+ writel(CM1_ABE_MCBSP3_CLKCTRL, 0x2);
+ writel(CM1_ABE_SLIMBUS_CLKCTRL, 0xf02);
+ writel(CM1_ABE_TIMER5_CLKCTRL, 0x2);
+ writel(CM1_ABE_TIMER6_CLKCTRL, 0x2);
+ writel(CM1_ABE_TIMER7_CLKCTRL, 0x2);
+ writel(CM1_ABE_TIMER8_CLKCTRL, 0x2);
+ writel(CM1_ABE_WDT3_CLKCTRL, 0x2);
/* Disable sleep transitions */
- sr32(CM1_ABE_CLKSTCTRL, 0, 32, 0x0);
+ writel(CM1_ABE_CLKSTCTRL, 0x0);
/* L4PER clocks */
- sr32(CM_L4PER_CLKSTCTRL, 0, 32, 0x2);
- sr32(CM_L4PER_DMTIMER10_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_CLKSTCTRL, 0x2);
+ writel(CM_L4PER_DMTIMER10_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER10_CLKCTRL, LDELAY);
- sr32(CM_L4PER_DMTIMER11_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_DMTIMER11_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER11_CLKCTRL, LDELAY);
- sr32(CM_L4PER_DMTIMER2_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_DMTIMER2_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_DMTIMER3_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_DMTIMER3_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_DMTIMER4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_DMTIMER4_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER4_CLKCTRL, LDELAY);
- sr32(CM_L4PER_DMTIMER9_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_DMTIMER9_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_DMTIMER9_CLKCTRL, LDELAY);
/* GPIO clocks */
omap4_enable_gpio_clocks();
- sr32(CM_L4PER_HDQ1W_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_HDQ1W_CLKCTRL, 0x2);
/* I2C clocks */
- sr32(CM_L4PER_I2C1_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_I2C1_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_I2C1_CLKCTRL, LDELAY);
- sr32(CM_L4PER_I2C2_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_I2C2_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_I2C2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_I2C3_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_I2C3_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_I2C3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_I2C4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_I2C4_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_I2C4_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MCBSP4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MCBSP4_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MCBSP4_CLKCTRL, LDELAY);
/* MCSPI clocks */
- sr32(CM_L4PER_MCSPI1_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MCSPI1_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MCSPI1_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MCSPI2_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MCSPI2_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MCSPI2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MCSPI3_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MCSPI3_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MCSPI3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MCSPI4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MCSPI4_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MCSPI4_CLKCTRL, LDELAY);
/* MMC clocks */
@@ -313,86 +313,86 @@ void omap4_enable_all_clocks(void)
sr32(CM_L3INIT_HSMMC1_CLKCTRL, 24, 1, 0x1);
sr32(CM_L3INIT_HSMMC2_CLKCTRL, 0, 2, 0x2);
sr32(CM_L3INIT_HSMMC2_CLKCTRL, 24, 1, 0x1);
- sr32(CM_L4PER_MMCSD3_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MMCSD3_CLKCTRL, 0x2);
wait_on_value((1 << 18)|(1 << 17)|(1 << 16), 0, CM_L4PER_MMCSD3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MMCSD4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MMCSD4_CLKCTRL, 0x2);
wait_on_value((1 << 18)|(1 << 17)|(1 << 16), 0, CM_L4PER_MMCSD4_CLKCTRL, LDELAY);
- sr32(CM_L4PER_MMCSD5_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_MMCSD5_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_MMCSD5_CLKCTRL, LDELAY);
/* UART clocks */
- sr32(CM_L4PER_UART1_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_UART1_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_UART1_CLKCTRL, LDELAY);
- sr32(CM_L4PER_UART2_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_UART2_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_UART2_CLKCTRL, LDELAY);
- sr32(CM_L4PER_UART3_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_UART3_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_UART3_CLKCTRL, LDELAY);
- sr32(CM_L4PER_UART4_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L4PER_UART4_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L4PER_UART4_CLKCTRL, LDELAY);
/* WKUP clocks */
omap4_enable_gpio1_wup_clocks();
- sr32(CM_WKUP_TIMER1_CLKCTRL, 0, 32, 0x01000002);
+ writel(CM_WKUP_TIMER1_CLKCTRL, 0x01000002);
wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_TIMER1_CLKCTRL, LDELAY);
- sr32(CM_WKUP_KEYBOARD_CLKCTRL, 0, 32, 0x2);
+ writel(CM_WKUP_KEYBOARD_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_KEYBOARD_CLKCTRL, LDELAY);
- sr32(CM_SDMA_CLKSTCTRL, 0, 32, 0x0);
- sr32(CM_MEMIF_CLKSTCTRL, 0, 32, 0x3);
- sr32(CM_MEMIF_EMIF_1_CLKCTRL, 0, 32, 0x1);
+ writel(CM_SDMA_CLKSTCTRL, 0x0);
+ writel(CM_MEMIF_CLKSTCTRL, 0x3);
+ writel(CM_MEMIF_EMIF_1_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_MEMIF_EMIF_1_CLKCTRL, LDELAY);
- sr32(CM_MEMIF_EMIF_2_CLKCTRL, 0, 32, 0x1);
+ writel(CM_MEMIF_EMIF_2_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_MEMIF_EMIF_2_CLKCTRL, LDELAY);
- sr32(CM_D2D_CLKSTCTRL, 0, 32, 0x3);
- sr32(CM_L3_2_GPMC_CLKCTRL, 0, 32, 0x1);
+ writel(CM_D2D_CLKSTCTRL, 0x3);
+ writel(CM_L3_2_GPMC_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L3_2_GPMC_CLKCTRL, LDELAY);
- sr32(CM_L3INSTR_L3_3_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L3INSTR_L3_3_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_L3_3_CLKCTRL, LDELAY);
- sr32(CM_L3INSTR_L3_INSTR_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L3INSTR_L3_INSTR_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_L3_INSTR_CLKCTRL, LDELAY);
- sr32(CM_L3INSTR_OCP_WP1_CLKCTRL, 0, 32, 0x1);
+ writel(CM_L3INSTR_OCP_WP1_CLKCTRL, 0x1);
wait_on_value((1 << 17)|(1 << 16), 0, CM_L3INSTR_OCP_WP1_CLKCTRL, LDELAY);
/* WDT clocks */
- sr32(CM_WKUP_WDT2_CLKCTRL, 0, 32, 0x2);
+ writel(CM_WKUP_WDT2_CLKCTRL, 0x2);
wait_on_value((1 << 17)|(1 << 16), 0, CM_WKUP_WDT2_CLKCTRL, LDELAY);
/* Enable Camera clocks */
- sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x3);
- sr32(CM_CAM_ISS_CLKCTRL, 0, 32, 0x102);
- sr32(CM_CAM_FDIF_CLKCTRL, 0, 32, 0x2);
- sr32(CM_CAM_CLKSTCTRL, 0, 32, 0x0);
+ writel(CM_CAM_CLKSTCTRL, 0x3);
+ writel(CM_CAM_ISS_CLKCTRL, 0x102);
+ writel(CM_CAM_FDIF_CLKCTRL, 0x2);
+ writel(CM_CAM_CLKSTCTRL, 0x0);
/* Enable DSS clocks */
/* PM_DSS_PWRSTCTRL ON State and LogicState = 1 (Retention) */
__raw_writel(7, 0x4A307100); /* DSS_PRM */
- sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x2);
- sr32(CM_DSS_DSS_CLKCTRL, 0, 32, 0xf02);
- sr32(CM_DSS_DEISS_CLKCTRL, 0, 32, 0x2);
+ writel(CM_DSS_CLKSTCTRL, 0x2);
+ writel(CM_DSS_DSS_CLKCTRL, 0xf02);
+ writel(CM_DSS_DEISS_CLKCTRL, 0x2);
/* Check for DSS Clocks */
while ((__raw_readl(0x4A009100) & 0xF00) != 0xE00)
;
/* Set HW_AUTO transition mode */
- sr32(CM_DSS_CLKSTCTRL, 0, 32, 0x3);
+ writel(CM_DSS_CLKSTCTRL, 0x3);
/* Enable SGX clocks */
- sr32(CM_SGX_CLKSTCTRL, 0, 32, 0x2);
- sr32(CM_SGX_SGX_CLKCTRL, 0, 32, 0x2);
+ writel(CM_SGX_CLKSTCTRL, 0x2);
+ writel(CM_SGX_SGX_CLKCTRL, 0x2);
/* Check for SGX FCLK and ICLK */
while (__raw_readl(0x4A009200) != 0x302)
;
/* Enable hsi/unipro/usb clocks */
- sr32(CM_L3INIT_HSI_CLKCTRL, 0, 32, 0x1);
- sr32(CM_L3INIT_UNIPRO1_CLKCTRL, 0, 32, 0x2);
- sr32(CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, 0x2);
- sr32(CM_L3INIT_HSUSBOTG_CLKCTRL, 0, 32, 0x1);
- sr32(CM_L3INIT_HSUSBTLL_CLKCTRL, 0, 32, 0x1);
- sr32(CM_L3INIT_FSUSB_CLKCTRL, 0, 32, 0x2);
+ writel(CM_L3INIT_HSI_CLKCTRL, 0x1);
+ writel(CM_L3INIT_UNIPRO1_CLKCTRL, 0x2);
+ writel(CM_L3INIT_HSUSBHOST_CLKCTRL, 0x2);
+ writel(CM_L3INIT_HSUSBOTG_CLKCTRL, 0x1);
+ writel(CM_L3INIT_HSUSBTLL_CLKCTRL, 0x1);
+ writel(CM_L3INIT_FSUSB_CLKCTRL, 0x2);
/* enable the 32K, 48M optional clocks and enable the module */
- sr32(CM_L3INIT_USBPHY_CLKCTRL, 0, 32, 0x301);
+ writel(CM_L3INIT_USBPHY_CLKCTRL, 0x301);
}
void omap4_do_scale_tps62361(u32 reg, u32 volt_mv)
--
1.8.3.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-07-22 9:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 9:56 [PATCH] some minor image size decrease Sascha Hauer
2013-07-22 9:56 ` [PATCH 1/4] mtd: nand: omap: do not set write callback if mtd write is disabled Sascha Hauer
2013-07-22 9:56 ` [PATCH 2/4] block: shortcut writebuffer_flush if writing " Sascha Hauer
2013-07-22 9:56 ` Sascha Hauer [this message]
2013-07-22 9:56 ` [PATCH 4/4] ARM: omap4: pcm049: register devices only when support is enabled Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374486983-5263-4-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox