[PATCH] ARM: OMAP: PCM051: Remove spi platform data

[PATCH] ARM: OMAP: PCM051: Remove spi platform data

[Teresa Gámez]

SPI NOR flash can be detected by driver so no platform data
is necessary.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
---
 arch/arm/boards/pcm051/board.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boards/pcm051/board.c b/arch/arm/boards/pcm051/board.c
index 1993f34..4a740c8 100644
--- a/arch/arm/boards/pcm051/board.c
+++ b/arch/arm/boards/pcm051/board.c
@@ -66,11 +66,6 @@ static int pcm051_mem_init(void)
 }
 mem_initcall(pcm051_mem_init);
 
-static struct flash_platform_data pcm051_spi_flash = {
-	.name	= "m25p",
-	.type	= "w25q64",
-};
-
 /*
 * SPI Flash works at 80Mhz however the SPI controller runs with 48MHz.
 * So setup Max speed to be less than the controller speed.
@@ -78,7 +73,6 @@ static struct flash_platform_data pcm051_spi_flash = {
 static struct spi_board_info pcm051_spi_board_info[] = {
 	{
 		.name		= "m25p80",
-		.platform_data	= &pcm051_spi_flash,
 		.max_speed_hz	= 24000000,
 		.bus_num	= 0,
 		.chip_select	= 0,
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH] ARM: OMAP: PCM051: Remove spi platform data

[Sascha Hauer]

On Mon, Aug 26, 2013 at 08:43:57AM +0200, Teresa Gámez wrote:
> SPI NOR flash can be detected by driver so no platform data
> is necessary.
> 
> Signed-off-by: Teresa Gámez <t.gamez@phytec.de>

Applied, thanks

Sascha

> ---
>  arch/arm/boards/pcm051/board.c |    6 ------
>  1 files changed, 0 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boards/pcm051/board.c b/arch/arm/boards/pcm051/board.c
> index 1993f34..4a740c8 100644
> --- a/arch/arm/boards/pcm051/board.c
> +++ b/arch/arm/boards/pcm051/board.c
> @@ -66,11 +66,6 @@ static int pcm051_mem_init(void)
>  }
>  mem_initcall(pcm051_mem_init);
>  
> -static struct flash_platform_data pcm051_spi_flash = {
> -	.name	= "m25p",
> -	.type	= "w25q64",
> -};
> -
>  /*
>  * SPI Flash works at 80Mhz however the SPI controller runs with 48MHz.
>  * So setup Max speed to be less than the controller speed.
> @@ -78,7 +73,6 @@ static struct flash_platform_data pcm051_spi_flash = {
>  static struct spi_board_info pcm051_spi_board_info[] = {
>  	{
>  		.name		= "m25p80",
> -		.platform_data	= &pcm051_spi_flash,
>  		.max_speed_hz	= 24000000,
>  		.bus_num	= 0,
>  		.chip_select	= 0,
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox