From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] gpio: Add designware gpio controller support
Date: Mon, 9 Sep 2013 16:54:42 +0200 [thread overview]
Message-ID: <1378738482-15488-1-git-send-email-s.hauer@pengutronix.de> (raw)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/gpio/Kconfig | 6 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-dw.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 158 insertions(+)
create mode 100644 drivers/gpio/gpio-dw.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d5ac532..18d3135 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -54,6 +54,12 @@ config GPIO_TEGRA
help
Say yes here to include the driver for the GPIO controller found on the
Tegra line of SoCs.
+
+config GPIO_DESIGNWARE
+ tristate "Synopsys DesignWare GPIO driver"
+ help
+ Say Y or M here to build support for the Synopsys DesignWare APB
+ GPIO block.
endmenu
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index adb668f..dc9fb13 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_GPIO_ORION) += gpio-orion.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_TEGRA) += gpio-tegra.o
+obj-$(CONFIG_GPIO_DESIGNWARE) += gpio-dw.o
diff --git a/drivers/gpio/gpio-dw.c b/drivers/gpio/gpio-dw.c
new file mode 100644
index 0000000..54e7452
--- /dev/null
+++ b/drivers/gpio/gpio-dw.c
@@ -0,0 +1,151 @@
+/*
+ * Designware GPIO support functions
+ *
+ * Copyright (C) 2012 Altera
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <io.h>
+#include <gpio.h>
+#include <init.h>
+
+#define GPIO_INT_EN_REG_OFFSET 0x30
+#define GPIO_INT_MASK_REG_OFFSET 0x34
+#define GPIO_INT_TYPE_LEVEL_REG_OFFSET 0x38
+#define GPIO_INT_POLARITY_REG_OFFSET 0x3c
+#define GPIO_INT_STATUS_REG_OFFSET 0x40
+#define GPIO_PORT_A_EOI_REG_OFFSET 0x4c
+
+#define GPIO_DDR_OFFSET_PORT 0x4
+#define DW_GPIO_EXT 0x50
+#define DW_GPIO_DR 0x0
+
+struct dw_gpio_instance {
+ struct gpio_chip chip;
+ u32 gpio_state; /* GPIO state shadow register */
+ u32 gpio_dir; /* GPIO direction shadow register */
+ void __iomem *regs;
+};
+
+static inline struct dw_gpio_instance *to_dw_gpio(struct gpio_chip *gc)
+{
+ return container_of(gc, struct dw_gpio_instance, chip);
+}
+
+static int dw_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct dw_gpio_instance *chip = to_dw_gpio(gc);
+
+ return (readl(chip->regs + DW_GPIO_EXT) >> offset) & 1;
+}
+
+static void dw_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct dw_gpio_instance *chip = to_dw_gpio(gc);
+ u32 data_reg;
+
+ data_reg = readl(chip->regs + DW_GPIO_DR);
+ data_reg = (data_reg & ~(1<<offset)) | (value << offset);
+ writel(data_reg, chip->regs + DW_GPIO_DR);
+}
+
+static int dw_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct dw_gpio_instance *chip = to_dw_gpio(gc);
+ u32 gpio_ddr;
+
+ /* Set pin as input, assumes software controlled IP */
+ gpio_ddr = readl(chip->regs + GPIO_DDR_OFFSET_PORT);
+ gpio_ddr &= ~(1 << offset);
+ writel(gpio_ddr, chip->regs + GPIO_DDR_OFFSET_PORT);
+
+ return 0;
+}
+
+static int dw_gpio_direction_output(struct gpio_chip *gc,
+ unsigned offset, int value)
+{
+ struct dw_gpio_instance *chip = to_dw_gpio(gc);
+ u32 gpio_ddr;
+
+ dw_gpio_set(gc, offset, value);
+
+ /* Set pin as output, assumes software controlled IP */
+ gpio_ddr = readl(chip->regs + GPIO_DDR_OFFSET_PORT);
+ gpio_ddr |= (1 << offset);
+ writel(gpio_ddr, chip->regs + GPIO_DDR_OFFSET_PORT);
+
+ return 0;
+}
+
+static struct gpio_ops imx_gpio_ops = {
+ .direction_input = dw_gpio_direction_input,
+ .direction_output = dw_gpio_direction_output,
+ .get = dw_gpio_get,
+ .set = dw_gpio_set,
+};
+
+static int dw_gpio_probe(struct device_d *dev)
+{
+ struct dw_gpio_instance *chip;
+ int ret;
+
+ chip = xzalloc(sizeof(*chip));
+ chip->regs = dev_request_mem_region(dev, 0);
+ if (!chip->regs)
+ return -EBUSY;
+
+ chip->chip.ops = &imx_gpio_ops;
+ if (dev->id < 0) {
+ chip->chip.base = of_alias_get_id(dev->device_node, "gpio");
+ if (chip->chip.base < 0)
+ return chip->chip.base;
+ chip->chip.base *= 32;
+ } else {
+ chip->chip.base = dev->id * 32;
+ }
+ chip->chip.ngpio = 32;
+ chip->chip.dev = dev;
+
+ ret = gpiochip_add(&chip->chip);
+ if (ret)
+ return ret;
+
+ dev_dbg(dev, "probed gpiochip%d with base %d\n", dev->id, chip->chip.base);
+
+ return 0;
+}
+
+static __maybe_unused struct of_device_id dwgpio_match[] = {
+ {
+ .compatible = "snps,dw-gpio",
+ }, {
+ /* sentinel */
+ },
+};
+
+static struct driver_d dwgpio_driver = {
+ .name = "dw-gpio",
+ .probe = dw_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(dwgpio_match),
+};
+
+static int __init dwgpio_init(void)
+{
+ return platform_driver_register(&dwgpio_driver);
+}
+core_initcall(dwgpio_init);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-09-09 14:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 14:54 Sascha Hauer [this message]
2013-09-09 16:28 ` Sebastian Hesselbarth
2013-09-10 7:48 ` Sascha Hauer
2013-09-10 8:56 ` Sebastian Hesselbarth
2013-09-11 6:35 ` Sascha Hauer
2013-10-17 8:04 ` Steffen Trumtrar
2013-10-17 8:24 ` Sebastian Hesselbarth
2013-10-17 8:38 ` Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378738482-15488-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox