mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/3] animeo_ip: ensure the phy is reset correctly
Date: Fri, 20 Sep 2013 07:47:44 +0200	[thread overview]
Message-ID: <1379656065-23690-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1379656065-23690-1-git-send-email-plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boards/animeo_ip/init.c | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boards/animeo_ip/init.c b/arch/arm/boards/animeo_ip/init.c
index 5419ddb..65fc0e6 100644
--- a/arch/arm/boards/animeo_ip/init.c
+++ b/arch/arm/boards/animeo_ip/init.c
@@ -19,6 +19,7 @@
 #include <nand.h>
 #include <sizes.h>
 #include <linux/mtd/nand.h>
+#include <linux/clk.h>
 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
 #include <gpio.h>
@@ -225,12 +226,45 @@ static void animeo_ip_power_control(void)
 	animeo_export_gpio_out(AT91_PIN_PC4, "power_save");
 }
 
+static void animeo_ip_phy_reset(void)
+{
+	unsigned long rstc;
+	int i;
+	struct clk *clk = clk_get(NULL, "macb_clk");
+
+	clk_enable(clk);
+
+	for (i = AT91_PIN_PA12; i <= AT91_PIN_PA29; i++)
+		at91_set_gpio_input(i, 0);
+
+	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0d << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL))
+		;
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | (rstc) | AT91_RSTC_URSTEN);
+}
+
+static void animeo_ip_add_device_eth(void)
+{
+	animeo_ip_phy_reset();
+	at91_add_device_eth(0, &macb_pdata);
+}
+
 static int animeo_ip_devices_init(void)
 {
 	animeo_ip_detect_version();
 	animeo_ip_power_control();
 	animeo_ip_add_device_nand();
-	at91_add_device_eth(0, &macb_pdata);
 	animeo_ip_add_device_usb();
 	animeo_ip_add_device_mci();
 	animeo_ip_add_device_buttons();
@@ -250,6 +284,8 @@ static int animeo_ip_devices_init(void)
 	devfs_add_partition("nand0", SZ_256K + SZ_32K, SZ_32K, DEVFS_PARTITION_FIXED, "env_raw");
 	dev_add_bb_dev("env_raw", "env0");
 
+	animeo_ip_add_device_eth();
+
 	return 0;
 }
 
-- 
1.8.4.rc1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-09-20  5:46 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-20  5:46 [PATCH 0/3 v2] Animeo IP: macb support improvement Jean-Christophe PLAGNIOL-VILLARD
2013-09-20  5:47 ` [PATCH 1/3] introduce helper to generate mac address with OUI Jean-Christophe PLAGNIOL-VILLARD
2013-09-20  5:47   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-09-23  4:38     ` [PATCH 2/3] animeo_ip: ensure the phy is reset correctly Jean-Christophe PLAGNIOL-VILLARD
2013-09-23  6:42       ` Sascha Hauer
2013-09-20  5:47   ` [PATCH 3/3] animeo_ip: retrieve the mac from the macb and set private mac to asix Jean-Christophe PLAGNIOL-VILLARD
2013-09-20  7:04   ` [PATCH 1/3] introduce helper to generate mac address with OUI Sascha Hauer
2013-09-20  7:44     ` Jean-Christophe PLAGNIOL-VILLARD
2013-09-22 18:28   ` Sascha Hauer
  -- strict thread matches above, loose matches on Subject: below --
2013-09-20  5:39 [PATCH 0/3] Animeo IP: macb support improvement Jean-Christophe PLAGNIOL-VILLARD
2013-09-20  5:40 ` [PATCH 1/3] introduce helper to generate mac address with OUI Jean-Christophe PLAGNIOL-VILLARD
2013-09-20  5:40   ` [PATCH 2/3] animeo_ip: ensure the phy is reset correctly Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1379656065-23690-2-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox