From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 8/8] serial: atmel: add start and shutdown support
Date: Thu, 3 Oct 2013 09:22:00 +0200 [thread overview]
Message-ID: <1380784920-30890-8-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1380784920-30890-1-git-send-email-plagnioj@jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
drivers/serial/atmel.c | 55 +++++++++++++++++++++++++++++++++++++-------------
1 file changed, 41 insertions(+), 14 deletions(-)
diff --git a/drivers/serial/atmel.c b/drivers/serial/atmel.c
index c2a5d33..a1eb4cb 100644
--- a/drivers/serial/atmel.c
+++ b/drivers/serial/atmel.c
@@ -20,6 +20,7 @@
#include <malloc.h>
#include <io.h>
#include <linux/clk.h>
+#include <linux/err.h>
/* USART3 register offsets */
#define USART3_CR 0x0000
@@ -388,31 +389,50 @@ static int atmel_serial_set_mode(struct console_device *cdev, enum console_mode
return 0;
}
+static void atmel_serial_shutdown(struct console_device *cdev)
+{
+ struct atmel_uart_port *uart = to_atmel_uart_port(cdev);
+
+ writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), uart->base + USART3_CR);
+ writel(0, uart->base + USART3_BRGR);
+
+ clk_disable(uart->clk);
+}
+
+static int atmel_serial_startup(struct console_device *cdev)
+{
+ struct atmel_uart_port *uart = to_atmel_uart_port(cdev);
+
+ clk_enable(uart->clk);
+
+ writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), uart->base + USART3_CR);
+
+ writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+ | USART3_BF(USCLKS, USART3_USCLKS_MCK)
+ | USART3_BF(CHRL, USART3_CHRL_8)
+ | USART3_BF(PAR, USART3_PAR_NONE)
+ | USART3_BF(NBSTOP, USART3_NBSTOP_1)),
+ uart->base + USART3_MR);
+
+ return 0;
+}
+
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*
*/
-static int atmel_serial_init_port(struct console_device *cdev)
+static void atmel_serial_init(struct console_device *cdev)
{
- struct device_d *dev = cdev->dev;
struct atmel_uart_port *uart = to_atmel_uart_port(cdev);
- uart->base = dev_request_mem_region(dev, 0);
- uart->clk = clk_get(dev, "usart");
clk_enable(uart->clk);
+
uart->uartclk = clk_get_rate(uart->clk);
writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), uart->base + USART3_CR);
- writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), uart->base + USART3_CR);
- writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
- | USART3_BF(USCLKS, USART3_USCLKS_MCK)
- | USART3_BF(CHRL, USART3_CHRL_8)
- | USART3_BF(PAR, USART3_PAR_NONE)
- | USART3_BF(NBSTOP, USART3_NBSTOP_1)), uart->base + USART3_MR);
-
- return 0;
+ clk_disable(uart->clk);
}
static int atmel_serial_probe(struct device_d *dev)
@@ -423,15 +443,22 @@ static int atmel_serial_probe(struct device_d *dev)
uart = xzalloc(sizeof(struct atmel_uart_port));
cdev = &uart->uart;
cdev->dev = dev;
+ cdev->startup = atmel_serial_startup;
+ cdev->shutdown = atmel_serial_shutdown;
cdev->tstc = atmel_serial_tstc;
cdev->putc = atmel_serial_putc;
cdev->getc = atmel_serial_getc;
cdev->setbrg = atmel_serial_setbaudrate;
cdev->set_mode = atmel_serial_set_mode;
- atmel_serial_init_port(cdev);
+ uart->base = dev_request_mem_region(dev, 0);
+
+ uart->clk = clk_get(dev, "usart");
+
+ if (IS_ERR(uart->clk))
+ return PTR_ERR(uart->clk);
- /* Enable UART */
+ atmel_serial_init(cdev);
console_register(cdev);
--
1.8.4.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-10-03 7:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-03 7:17 [PATCH 0/8 v2] more serial cleanup Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 1/8] console: factorise function to get the first enabled console Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 2/8] console: factorise function to get the console by name Jean-Christophe PLAGNIOL-VILLARD
2013-10-06 11:24 ` Sascha Hauer
2013-10-06 18:38 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-07 6:23 ` Sascha Hauer
2013-10-03 7:21 ` [PATCH 3/8] console: introduce startup and shutdown Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 4/8] loadxy: use console_open/close Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 5/8] console: console_get_by_name pass flags Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 6/8] animeo_ip: update to use console_open/close for rs485 crossed detection Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:21 ` [PATCH 7/8] serial: amba-pl011: add start and shutdown support Jean-Christophe PLAGNIOL-VILLARD
2013-10-03 7:22 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-09-27 7:12 [PATCH 0/8] more serial cleanup Jean-Christophe PLAGNIOL-VILLARD
2013-09-27 7:14 ` [PATCH 1/8] console_simple: fix: set f_active Jean-Christophe PLAGNIOL-VILLARD
2013-09-27 7:14 ` [PATCH 8/8] serial: atmel: add start and shutdown support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380784920-30890-8-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox