From: Renaud Barbier <renaud.barbier@ge.com>
To: barebox@lists.infradead.org
Subject: [PATCH v3 0/5] GEIP DA923RC board support
Date: Tue, 5 Nov 2013 15:36:07 +0000 [thread overview]
Message-ID: <1383665772-1167-1-git-send-email-renaud.barbier@ge.com> (raw)
This patch set addresses comments by using the GPIO API
to set gpio out pins, using the I2C API where necessary
but still allowing for early I2C access for future early
configuration.
This patch set adds support to the GEIP DA923RC extending
the CPU support to the MPC8544 and allowing the use of the
DDR driver.
Renaud Barbier (5):
ppc: mpc85xx: mpc8544 support
ppc: mpc85xx: define Ethernet port count
ppc: mpc85xx: enable DDR driver
ppc: DA923RC: add board support
ppc: mpc85xx: build directives
arch/ppc/Makefile | 1 +
arch/ppc/boards/geip-da923rc/Makefile | 7 +
arch/ppc/boards/geip-da923rc/barebox.lds.S | 155 ++++++++++++++
arch/ppc/boards/geip-da923rc/config.h | 54 +++++
arch/ppc/boards/geip-da923rc/da923rc.c | 212 ++++++++++++++++++++
arch/ppc/boards/geip-da923rc/ddr.c | 169 ++++++++++++++++
arch/ppc/boards/geip-da923rc/env/bin/init | 4 +
arch/ppc/boards/geip-da923rc/env/config | 4 +
arch/ppc/boards/geip-da923rc/law.c | 24 +++
arch/ppc/boards/geip-da923rc/nand.c | 94 +++++++++
arch/ppc/boards/geip-da923rc/product_data.c | 66 ++++++
arch/ppc/boards/geip-da923rc/product_data.h | 62 ++++++
arch/ppc/boards/geip-da923rc/tlb.c | 69 +++++++
arch/ppc/configs/da923rc_defconfig | 57 ++++++
arch/ppc/ddr-8xxx/Makefile | 2 +
arch/ppc/include/asm/fsl_lbc.h | 12 +
arch/ppc/include/asm/processor.h | 2 +
arch/ppc/mach-mpc85xx/Kconfig | 32 +++-
arch/ppc/mach-mpc85xx/Makefile | 3 +
arch/ppc/mach-mpc85xx/cpu.c | 6 +-
arch/ppc/mach-mpc85xx/cpuid.c | 2 +
arch/ppc/mach-mpc85xx/eth-devices.c | 2 +-
arch/ppc/mach-mpc85xx/fsl_gpio.c | 47 +++++
arch/ppc/mach-mpc85xx/include/mach/clock.h | 1 +
.../ppc/mach-mpc85xx/include/mach/config_mpc85xx.h | 7 +
arch/ppc/mach-mpc85xx/include/mach/gpio.h | 17 ++
arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 23 ++
arch/ppc/mach-mpc85xx/speed.c | 18 ++
28 files changed, 1142 insertions(+), 10 deletions(-)
create mode 100644 arch/ppc/boards/geip-da923rc/Makefile
create mode 100644 arch/ppc/boards/geip-da923rc/barebox.lds.S
create mode 100644 arch/ppc/boards/geip-da923rc/config.h
create mode 100644 arch/ppc/boards/geip-da923rc/da923rc.c
create mode 100644 arch/ppc/boards/geip-da923rc/ddr.c
create mode 100644 arch/ppc/boards/geip-da923rc/env/bin/init
create mode 100644 arch/ppc/boards/geip-da923rc/env/config
create mode 100644 arch/ppc/boards/geip-da923rc/law.c
create mode 100644 arch/ppc/boards/geip-da923rc/nand.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.c
create mode 100644 arch/ppc/boards/geip-da923rc/product_data.h
create mode 100644 arch/ppc/boards/geip-da923rc/tlb.c
create mode 100644 arch/ppc/configs/da923rc_defconfig
create mode 100644 arch/ppc/ddr-8xxx/Makefile
create mode 100644 arch/ppc/mach-mpc85xx/fsl_gpio.c
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/gpio.h
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2013-11-05 15:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-05 15:36 Renaud Barbier [this message]
2013-11-05 15:36 ` [PATCH 1/5] ppc: mpc85xx: mpc8544 support Renaud Barbier
2013-11-05 15:36 ` [PATCH 2/5] ppc: mpc85xx: define Ethernet port count Renaud Barbier
2013-11-05 15:36 ` [PATCH 3/5] ppc: mpc85xx: enable DDR driver Renaud Barbier
2013-11-05 15:36 ` [PATCH 4/5] ppc: DA923RC: add board support Renaud Barbier
2013-11-05 15:36 ` [PATCH 5/5] ppc: mpc85xx: build directives Renaud Barbier
2013-11-06 10:05 ` [PATCH v3 0/5] GEIP DA923RC board support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383665772-1167-1-git-send-email-renaud.barbier@ge.com \
--to=renaud.barbier@ge.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox