From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 08/17] net: cpsw: move eth_device into slave
Date: Fri, 22 Nov 2013 15:48:52 +0100 [thread overview]
Message-ID: <1385131741-28280-9-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1385131741-28280-1-git-send-email-s.hauer@pengutronix.de>
An ethernet device is per slave, not per cpsw.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/cpsw.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index f021f31..d969654 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -179,6 +179,7 @@ struct cpsw_slave {
u32 mac_control;
int phy_id;
phy_interface_t phy_if;
+ struct eth_device edev;
};
struct cpdma_desc {
@@ -199,7 +200,6 @@ struct cpdma_chan {
struct cpsw_priv {
struct device_d *dev;
- struct eth_device edev;
struct mii_bus miibus;
u32 version;
@@ -575,7 +575,7 @@ static int cpsw_set_hwaddr(struct eth_device *edev, unsigned char *mac)
static void cpsw_slave_update_link(struct cpsw_slave *slave,
struct cpsw_priv *priv, int *link)
{
- struct phy_device *phydev = priv->edev.phydev;
+ struct phy_device *phydev = slave->edev.phydev;
u32 mac_control = 0;
dev_dbg(priv->dev, "* %s\n", __func__);
@@ -915,12 +915,25 @@ static void cpsw_slave_setup(struct cpsw_slave *slave, int slave_num,
struct cpsw_priv *priv)
{
void *regs = priv->regs;
+ struct eth_device *edev = &slave->edev;
dev_dbg(priv->dev, "* %s\n", __func__);
slave->slave_num = slave_num;
slave->regs = regs + priv->slave_ofs + priv->slave_size * slave_num;
slave->sliver = regs + priv->sliver_ofs + SLIVER_SIZE * slave_num;
+
+ edev->priv = priv;
+ edev->init = cpsw_init;
+ edev->open = cpsw_open;
+ edev->halt = cpsw_halt;
+ edev->send = cpsw_send;
+ edev->recv = cpsw_recv;
+ edev->get_ethaddr = cpsw_get_hwaddr;
+ edev->set_ethaddr = cpsw_set_hwaddr;
+ edev->parent = priv->dev;
+
+ eth_register(edev);
}
struct cpsw_data {
@@ -1011,7 +1024,6 @@ int cpsw_probe(struct device_d *dev)
struct cpsw_platform_data *data = (struct cpsw_platform_data *)dev->platform_data;
struct cpsw_priv *priv;
void __iomem *regs;
- struct eth_device *edev;
uint64_t start;
uint32_t phy_mask;
struct cpsw_data *cpsw_data;
@@ -1037,7 +1049,6 @@ int cpsw_probe(struct device_d *dev)
priv->channels = 8;
priv->ale_entries = 1024;
- edev = &priv->edev;
priv->host_port = 0;
priv->regs = regs;
@@ -1066,18 +1077,6 @@ int cpsw_probe(struct device_d *dev)
priv->slave_size = cpsw_data->slave_size;
priv->sliver_ofs = cpsw_data->sliver_ofs;
- for_each_slave(priv, cpsw_slave_setup, idx, priv);
-
- edev->priv = priv;
- edev->init = cpsw_init;
- edev->open = cpsw_open;
- edev->halt = cpsw_halt;
- edev->send = cpsw_send;
- edev->recv = cpsw_recv;
- edev->get_ethaddr = cpsw_get_hwaddr;
- edev->set_ethaddr = cpsw_set_hwaddr;
- edev->parent = dev;
-
priv->miibus.read = cpsw_mdio_read;
priv->miibus.write = cpsw_mdio_write;
priv->miibus.priv = priv;
@@ -1119,7 +1118,7 @@ int cpsw_probe(struct device_d *dev)
mdiobus_register(&priv->miibus);
- eth_register(edev);
+ for_each_slave(priv, cpsw_slave_setup, idx, priv);
return 0;
}
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-11-22 14:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-22 14:48 Add devicetree support to OMAP drivers Sascha Hauer
2013-11-22 14:48 ` [PATCH 01/17] serial: ns16550: Add device ids for omap Sascha Hauer
2013-11-22 14:48 ` [PATCH 02/17] pinctrl: Add pinctrl-single driver Sascha Hauer
2013-11-22 14:48 ` [PATCH 03/17] spi: omap: encode register offset into device_id Sascha Hauer
2013-11-22 14:48 ` [PATCH 04/17] spi: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 05/17] i2c: omap: Add devicetree support Sascha Hauer
2013-11-22 14:48 ` [PATCH 06/17] net: cpsw: inline slave_data Sascha Hauer
2013-11-22 14:48 ` [PATCH 07/17] cpsw: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` Sascha Hauer [this message]
2013-11-22 14:48 ` [PATCH 09/17] net: cpsw: drop for_each_slave Sascha Hauer
2013-11-22 14:48 ` [PATCH 10/17] net: cpsw: attach slave to edev->priv Sascha Hauer
2013-11-22 14:48 ` [PATCH 11/17] net: cpsw: straighten error path Sascha Hauer
2013-11-22 14:48 ` [PATCH 12/17] gpio: omap: move to drivers/gpio/ Sascha Hauer
2013-11-22 14:48 ` [PATCH 13/17] omap: gpmc: some refactoring Sascha Hauer
2013-11-22 14:48 ` [PATCH 14/17] gpio: omap: Add devicetree probe support Sascha Hauer
2013-11-22 14:48 ` [PATCH 15/17] mtd: omap gpmc: Use dev_add_param_enum Sascha Hauer
2013-11-22 14:49 ` [PATCH 16/17] bus: Add omap gpmc driver Sascha Hauer
2013-11-22 14:49 ` [PATCH 17/17] mmc: omap: Add devicetree support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385131741-28280-9-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox