* [PATCH 3/3] ARM: i.MX6: tqma6x: dts: remove unused dts file
2013-12-06 19:17 DTS patches Robert Schwebel
2013-12-06 19:17 ` [PATCH 1/3] ARM: i.MX6: tqma6x: dts: move FEC enablement to baseboard Robert Schwebel
2013-12-06 19:17 ` [PATCH 2/3] ARM: i.MX6: tqma6x: dts: get MAC address from OCOTP Robert Schwebel
@ 2013-12-06 19:17 ` Robert Schwebel
2 siblings, 0 replies; 5+ messages in thread
From: Robert Schwebel @ 2013-12-06 19:17 UTC (permalink / raw)
To: barebox
The DTS file for MBa6x is imx6q-mba6x.dts, so it looks like this file
doesn't make any sense.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
arch/arm/dts/imx6q-tqma6x.dts | 319 ------------------------------------------
1 file changed, 319 deletions(-)
delete mode 100644 arch/arm/dts/imx6q-tqma6x.dts
diff --git a/arch/arm/dts/imx6q-tqma6x.dts b/arch/arm/dts/imx6q-tqma6x.dts
deleted file mode 100644
index f556381..0000000
--- a/arch/arm/dts/imx6q-tqma6x.dts
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-
-/ {
- model = "TQ TQMa6x";
- compatible = "tq,tqma6x", "fsl,imx6q";
-
- chosen {
- linux,stdout-path = "/soc/aips-bus@02100000/serial@021e8000";
- };
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- gpio_buttons: gpio_buttons@0 {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiobuttons_1>;
-
- button@1 {
- label = "button0";
- linux,code = <0x100>;
- gpios = <&gpio7 13 0>;
- };
-
- button@2 {
- label = "button1";
- linux,code = <0x101>;
- gpios = <&gpio7 12 0>;
- };
-
- button@3 {
- label = "button2";
- linux,code = <0x102>;
- gpios = <&gpio1 8 0>;
- };
- };
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
- status = "okay";
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
- status = "okay";
-
- flash: m25p80@0 {
- compatible = "m25p80";
- spi-max-frequency = <40000000>;
- reg = <0>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- status = "disabled";
-};
-
-&hdmi {
- status = "okay";
- ddc = <&i2c2>;
-};
-
-&i2c3 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
-
- pmic: pf0100@08 {
- compatible = "pf0100-regulator";
- reg = <0x08>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 8>;
-
- regulators {
- reg_vddcore: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_vddsoc: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_gen_3v3: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5a: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5b: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_vtt: sw4 {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_5v_600mA: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-always-on;
- };
-
- reg_snvs_3v: vsnvs {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- reg_vrefddr: vrefddr {
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- };
-
- reg_vgen1_1v5: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- /* not used */
- };
-
- reg_vgen2_1v2_eth: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-always-on;
- };
-
- reg_vgen3_2v8: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen4_1v8: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen5_1v8_eth: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen6_3v3: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- };
-
- sensor1: lm75@48 {
- compatible = "lm75";
- reg = <0x48>;
- };
-
- sensor2: lm75@49 {
- compatible = "lm75";
- reg = <0x49>;
- };
-
- eeprom: m24c64@50 { /* FIXME: Baseboard */
- compatible = "st,24c64", "at24";
- reg = <0x50>;
- };
-
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- can1 {
- pinctrl_can1_1: can1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
- >;
- };
- };
-
- can2 {
- pinctrl_can2_1: can2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
- MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
- >;
- };
- };
-
- hog {
- pinctrl_hog: hoggrp-1 {
- fsl,pins = <
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 /* FEC phy reset */
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* usdhc2 CD */
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* usdhc2 WP */
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* eCSPI1 SS1 */
- MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x80000000 /* PMIC irq */
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_2: i2c3grp-2 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_2: uart2grp-2 {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
- >;
- };
- };
-
- gpiobuttons {
- pinctrl_gpiobuttons_1: gpiogrp-1 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000
- MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000
- >;
- };
- };
-};
-
-&sata {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
-};
-
-&usbh1 {
- status = "okay";
- barebox,phy_type = "utmi";
- disable-over-current;
-};
-
-&usbotg {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- phy_type = "utmi";
- dr_mode = "host";
- disable-over-current;
- otg_id_pin_select_change;
- status = "okay";
-};
-
-&usdhc2 { /* Baseboard Slot */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2_1>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
- max-frequency = <1000000>;
- status = "okay";
-};
-
-&usdhc3 { /* eMMC */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
- non-removable;
- bus-width = <8>;
- status = "disabled";
-};
--
1.8.4.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread