From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.visioncatalog.de ([217.6.246.34] helo=root.phytec.de) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1VqOCu-0000Re-J6 for barebox@lists.infradead.org; Tue, 10 Dec 2013 14:22:42 +0000 Message-ID: <1386685332.3377.2.camel@lws-weitzel> From: Jan Weitzel Date: Tue, 10 Dec 2013 15:22:12 +0100 In-Reply-To: <1385484367-15366-5-git-send-email-s.hauer@pengutronix.de> References: <1385484367-15366-1-git-send-email-s.hauer@pengutronix.de> <1385484367-15366-5-git-send-email-s.hauer@pengutronix.de> Mime-Version: 1.0 Reply-To: J.Weitzel@phytec.de List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 04/17] ARM: am335x phytec phyCORE: Switch to devicetree probe support To: Sascha Hauer Cc: barebox@lists.infradead.org Am Dienstag, den 26.11.2013, 17:45 +0100 schrieb Sascha Hauer: > This switches the am335x Phytec phyCORE to devicetree probe support. > For now we use a linked in dtb. > > Signed-off-by: Sascha Hauer > --- > arch/arm/boards/pcm051/Makefile | 2 +- > arch/arm/boards/pcm051/board.c | 149 ++-------------------------------- > arch/arm/boards/pcm051/mux.c | 65 --------------- > arch/arm/boards/pcm051/mux.h | 4 - > arch/arm/configs/pcm051_defconfig | 26 ++++-- > arch/arm/configs/pcm051_mlo_defconfig | 8 +- > 6 files changed, 32 insertions(+), 222 deletions(-) > delete mode 100644 arch/arm/boards/pcm051/mux.c > delete mode 100644 arch/arm/boards/pcm051/mux.h > > ... > diff --git a/arch/arm/configs/pcm051_defconfig b/arch/arm/configs/pcm051_defconfig > index 97e0940..e55ac47 100644 > --- a/arch/arm/configs/pcm051_defconfig > +++ b/arch/arm/configs/pcm051_defconfig > @@ -1,16 +1,21 @@ > +CONFIG_BUILTIN_DTB=y > +CONFIG_BUILTIN_DTB_NAME="am335x-phytec-phycore" > CONFIG_ARCH_OMAP=y > -CONFIG_ARCH_AM33XX=y > CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO=y > CONFIG_MACH_PCM051=y > -CONFIG_OMAP_UART1=y > -CONFIG_AEABI=y > +CONFIG_THUMB2_BAREBOX=y Is there a reason to use thumb2 now? Jan > CONFIG_ARM_BOARD_APPEND_ATAG=y > CONFIG_CMD_ARM_MMUINFO=y > CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y > CONFIG_ARM_UNWIND=y > +CONFIG_PBL_IMAGE=y > +CONFIG_PBL_RELOCATABLE=y > CONFIG_MMU=y > -CONFIG_TEXT_BASE=0x8f000000 > -CONFIG_MALLOC_SIZE=0x2000000 > +CONFIG_TEXT_BASE=0x0 > +CONFIG_MALLOC_SIZE=0x0 > +CONFIG_MALLOC_TLSF=y > +CONFIG_KALLSYMS=y > +CONFIG_RELOCATABLE=y > CONFIG_PROMPT="barebox@pcm051>" > CONFIG_LONGHELP=y > CONFIG_HUSH_FANCY_PROMPT=y > @@ -21,9 +26,6 @@ CONFIG_MENU=y > CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y > CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pcm051/env" > CONFIG_DEBUG_INFO=y > -CONFIG_ENABLE_FLASH_NOISE=y > -CONFIG_ENABLE_PARTITION_NOISE=y > -CONFIG_ENABLE_DEVICE_NOISE=y > CONFIG_CMD_EDIT=y > CONFIG_CMD_SLEEP=y > CONFIG_CMD_SAVEENV=y > @@ -44,6 +46,7 @@ CONFIG_CMD_UBIFORMAT=y > CONFIG_CMD_BOOTM_SHOW_TYPE=y > CONFIG_CMD_UIMAGE=y > CONFIG_CMD_BOOTZ=y > +# CONFIG_CMD_BOOTU is not set > CONFIG_CMD_RESET=y > CONFIG_CMD_GO=y > CONFIG_CMD_BAREBOX_UPDATE=y > @@ -57,6 +60,8 @@ CONFIG_NET=y > CONFIG_NET_DHCP=y > CONFIG_NET_NFS=y > CONFIG_NET_PING=y > +CONFIG_OFDEVICE=y > +CONFIG_OF_BAREBOX_DRIVERS=y > CONFIG_DRIVER_SERIAL_NS16550=y > CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y > CONFIG_DRIVER_NET_CPSW=y > @@ -67,13 +72,16 @@ CONFIG_MTD=y > CONFIG_MTD_M25P80=y > CONFIG_NAND=y > CONFIG_NAND_OMAP_GPMC=y > -CONFIG_UBI=y > +CONFIG_MTD_UBI=y > CONFIG_USB=y > CONFIG_MCI=y > CONFIG_MCI_STARTUP=y > CONFIG_MCI_OMAP_HSMMC=y > CONFIG_EEPROM_AT24=y > CONFIG_GPIO_GENERIC_PLATFORM=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_SINGLE=y > +CONFIG_BUS_OMAP_GPMC=y > CONFIG_FS_TFTP=y > CONFIG_FS_NFS=y > CONFIG_FS_FAT=y > diff --git a/arch/arm/configs/pcm051_mlo_defconfig b/arch/arm/configs/pcm051_mlo_defconfig > index ea65979..4f6a7b1 100644 > --- a/arch/arm/configs/pcm051_mlo_defconfig > +++ b/arch/arm/configs/pcm051_mlo_defconfig > @@ -1,8 +1,8 @@ > +CONFIG_BUILTIN_DTB=y > +CONFIG_BUILTIN_DTB_NAME="am335x-phytec-phycore" > CONFIG_ARCH_OMAP=y > -CONFIG_ARCH_AM33XX=y > CONFIG_OMAP_BUILD_IFT=y > CONFIG_MACH_PCM051=y > -CONFIG_OMAP_UART1=y > CONFIG_THUMB2_BAREBOX=y > # CONFIG_CMD_ARM_CPUINFO is not set > # CONFIG_MEMINFO is not set > @@ -17,6 +17,7 @@ CONFIG_SHELL_NONE=y > # CONFIG_TIMESTAMP is not set > CONFIG_CONSOLE_SIMPLE=y > # CONFIG_DEFAULT_ENVIRONMENT is not set > +CONFIG_OFDEVICE=y > CONFIG_DRIVER_SERIAL_NS16550=y > CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y > CONFIG_DRIVER_SPI_OMAP3=y > @@ -27,6 +28,9 @@ CONFIG_NAND_OMAP_GPMC=y > CONFIG_MCI=y > CONFIG_MCI_STARTUP=y > CONFIG_MCI_OMAP_HSMMC=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_SINGLE=y > +CONFIG_BUS_OMAP_GPMC=y > # CONFIG_FS_RAMFS is not set > # CONFIG_FS_DEVFS is not set > CONFIG_FS_FAT=y _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox