mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 04/10] ARM: imx6: update phytec-pfla02 DT
Date: Tue,  7 Jan 2014 19:12:50 +0100	[thread overview]
Message-ID: <1389118376-1740-4-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1389118376-1740-1-git-send-email-l.stach@pengutronix.de>

From: Lucas Stach <dev@lynxeye.de>

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/dts/imx6q-phytec-pfla02.dtsi | 144 +++++++++++++++++++++++++++++-----
 1 file changed, 125 insertions(+), 19 deletions(-)

diff --git a/arch/arm/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
index d113f7f..b615491 100644
--- a/arch/arm/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
@@ -22,7 +22,7 @@
 
 &ecspi3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3_1>;
+	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 0>;
@@ -35,34 +35,140 @@
 };
 
 &i2c1 {
-	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
 
-	eeprom: m24c32@50 {
-		compatible = "st,24c32", "at24";
+	eeprom@50 {
+		compatible = "atmel,24c32";
 		reg = <0x50>;
 	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6q-phytec-pfla02 {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23    0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
 			>;
 		};
-	};
 
-	pfla02 {
-		pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <MX6QDL_ECSPI3_PINGRP1>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <MX6QDL_ENET_PINGRP3>;
+		};
+
+		pinctrl_gpmi_nand: gpmigrp {
+			fsl,pins = <MX6QDL_GPMI_NAND_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <MX6QDL_UART4_PINGRP1>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <MX6QDL_USDHC2_PINGRP_D4>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
 			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
 	};
@@ -70,7 +176,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_3>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 0>;
 	status = "disabled";
@@ -93,7 +199,7 @@
 
 &gpmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	nand-on-flash-bbt;
 	status = "okay";
 	#address-cells = <1>;
@@ -116,13 +222,13 @@
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_1>;
+	pinctrl-0 = <&pinctrl_uart4>;
 	status = "disabled";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 0>;
 	wp-gpios = <&gpio1 2 0>;
 	status = "disabled";
@@ -130,8 +236,8 @@
 
 &usdhc3 {
         pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3_2
-		     &pinctrl_usdhc3_pfla02>;
+        pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
         cd-gpios = <&gpio1 27 0>;
         wp-gpios = <&gpio1 29 0>;
         status = "disabled";
-- 
1.8.4.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-01-07 18:18 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-07 18:12 [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Lucas Stach
2014-01-07 18:12 ` [PATCH 02/10] ARM: imx6q: update sabrelite DT Lucas Stach
2014-01-07 18:12 ` [PATCH 03/10] ARM: imx6: update SabreSD DTs Lucas Stach
2014-01-07 18:12 ` Lucas Stach [this message]
2014-01-07 18:12 ` [PATCH 05/10] ARM: imx6: update Carrier-1 DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 06/10] ARM: imx6: update TQ DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 07/10] ARM: imx6: update GK802 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 08/10] ARM: imx6: update DMO RealQ7 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 09/10] ARM: imx6: update DFI FS700 M60 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 10/10] ARM: imx6: remove old pingroups Lucas Stach
2014-01-10  8:23 ` [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389118376-1740-4-git-send-email-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox