From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 06/10] ARM: imx6: update TQ DTs
Date: Tue, 7 Jan 2014 19:12:52 +0100 [thread overview]
Message-ID: <1389118376-1740-6-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1389118376-1740-1-git-send-email-l.stach@pengutronix.de>
From: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/imx6qdl-mba6x.dtsi | 16 ++++++++++++++--
arch/arm/dts/imx6qdl-tqma6x.dtsi | 34 +++++++++++++++++++++++++++++-----
2 files changed, 43 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-mba6x.dtsi b/arch/arm/dts/imx6qdl-mba6x.dtsi
index ec002c6..dbf43c2 100644
--- a/arch/arm/dts/imx6qdl-mba6x.dtsi
+++ b/arch/arm/dts/imx6qdl-mba6x.dtsi
@@ -96,7 +96,7 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
@@ -112,6 +112,18 @@
status = "okay";
};
+&iomuxc {
+ imx6qdl-mba6x {
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX6QDL_AUDMUX_PINGRP2>;
+ };
+ };
+};
+
&i2c1 {
codec: tlv320@18 {
compatible = "ti,tlv320aic23";
@@ -172,7 +184,7 @@
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
+ pinctrl-0 = <&pinctrl_usbotg>;
phy_type = "utmi";
dr_mode = "host";
disable-over-current;
diff --git a/arch/arm/dts/imx6qdl-tqma6x.dtsi b/arch/arm/dts/imx6qdl-tqma6x.dtsi
index 668fa25..ce18e23 100644
--- a/arch/arm/dts/imx6qdl-tqma6x.dtsi
+++ b/arch/arm/dts/imx6qdl-tqma6x.dtsi
@@ -11,7 +11,7 @@
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
status = "okay";
@@ -25,23 +25,47 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
status = "okay";
};
+&iomuxc {
+ imx6qdl-tqma6x {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <MX6QDL_ENET_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX6QDL_I2C1_PINGRP2>;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <MX6QDL_I2C3_PINGRP2>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <MX6QDL_USDHC3_PINGRP_D8>;
+ };
+ };
+};
+
&i2c1 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_2>;
+ pinctrl-0 = <&pinctrl_i2c1>;
};
&i2c3 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
+ pinctrl-0 = <&pinctrl_i2c3>;
pmic: pf0100@08 {
compatible = "pf0100-regulator";
@@ -155,7 +179,7 @@
&usdhc3 { /* eMMC */
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
non-removable;
bus-width = <8>;
status = "okay";
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-01-07 18:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-07 18:12 [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Lucas Stach
2014-01-07 18:12 ` [PATCH 02/10] ARM: imx6q: update sabrelite DT Lucas Stach
2014-01-07 18:12 ` [PATCH 03/10] ARM: imx6: update SabreSD DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 04/10] ARM: imx6: update phytec-pfla02 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 05/10] ARM: imx6: update Carrier-1 DTs Lucas Stach
2014-01-07 18:12 ` Lucas Stach [this message]
2014-01-07 18:12 ` [PATCH 07/10] ARM: imx6: update GK802 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 08/10] ARM: imx6: update DMO RealQ7 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 09/10] ARM: imx6: update DFI FS700 M60 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 10/10] ARM: imx6: remove old pingroups Lucas Stach
2014-01-10 8:23 ` [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389118376-1740-6-git-send-email-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox