* [PATCH 2/9] dt-bindings: import input.h
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 3/9] dt-bindings: import irq.h Lucas Stach
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Straight copy from the Linux kernel.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
include/dt-bindings/input/input.h | 525 ++++++++++++++++++++++++++++++++++++++
1 file changed, 525 insertions(+)
create mode 100644 include/dt-bindings/input/input.h
diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
new file mode 100644
index 0000000..042e7b3
--- /dev/null
+++ b/include/dt-bindings/input/input.h
@@ -0,0 +1,525 @@
+/*
+ * This header provides constants for most input bindings.
+ *
+ * Most input bindings include key code, matrix key code format.
+ * In most cases, key code and matrix key code format uses
+ * the standard values/macro defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INPUT_INPUT_H
+#define _DT_BINDINGS_INPUT_INPUT_H
+
+#define KEY_RESERVED 0
+#define KEY_ESC 1
+#define KEY_1 2
+#define KEY_2 3
+#define KEY_3 4
+#define KEY_4 5
+#define KEY_5 6
+#define KEY_6 7
+#define KEY_7 8
+#define KEY_8 9
+#define KEY_9 10
+#define KEY_0 11
+#define KEY_MINUS 12
+#define KEY_EQUAL 13
+#define KEY_BACKSPACE 14
+#define KEY_TAB 15
+#define KEY_Q 16
+#define KEY_W 17
+#define KEY_E 18
+#define KEY_R 19
+#define KEY_T 20
+#define KEY_Y 21
+#define KEY_U 22
+#define KEY_I 23
+#define KEY_O 24
+#define KEY_P 25
+#define KEY_LEFTBRACE 26
+#define KEY_RIGHTBRACE 27
+#define KEY_ENTER 28
+#define KEY_LEFTCTRL 29
+#define KEY_A 30
+#define KEY_S 31
+#define KEY_D 32
+#define KEY_F 33
+#define KEY_G 34
+#define KEY_H 35
+#define KEY_J 36
+#define KEY_K 37
+#define KEY_L 38
+#define KEY_SEMICOLON 39
+#define KEY_APOSTROPHE 40
+#define KEY_GRAVE 41
+#define KEY_LEFTSHIFT 42
+#define KEY_BACKSLASH 43
+#define KEY_Z 44
+#define KEY_X 45
+#define KEY_C 46
+#define KEY_V 47
+#define KEY_B 48
+#define KEY_N 49
+#define KEY_M 50
+#define KEY_COMMA 51
+#define KEY_DOT 52
+#define KEY_SLASH 53
+#define KEY_RIGHTSHIFT 54
+#define KEY_KPASTERISK 55
+#define KEY_LEFTALT 56
+#define KEY_SPACE 57
+#define KEY_CAPSLOCK 58
+#define KEY_F1 59
+#define KEY_F2 60
+#define KEY_F3 61
+#define KEY_F4 62
+#define KEY_F5 63
+#define KEY_F6 64
+#define KEY_F7 65
+#define KEY_F8 66
+#define KEY_F9 67
+#define KEY_F10 68
+#define KEY_NUMLOCK 69
+#define KEY_SCROLLLOCK 70
+#define KEY_KP7 71
+#define KEY_KP8 72
+#define KEY_KP9 73
+#define KEY_KPMINUS 74
+#define KEY_KP4 75
+#define KEY_KP5 76
+#define KEY_KP6 77
+#define KEY_KPPLUS 78
+#define KEY_KP1 79
+#define KEY_KP2 80
+#define KEY_KP3 81
+#define KEY_KP0 82
+#define KEY_KPDOT 83
+
+#define KEY_ZENKAKUHANKAKU 85
+#define KEY_102ND 86
+#define KEY_F11 87
+#define KEY_F12 88
+#define KEY_RO 89
+#define KEY_KATAKANA 90
+#define KEY_HIRAGANA 91
+#define KEY_HENKAN 92
+#define KEY_KATAKANAHIRAGANA 93
+#define KEY_MUHENKAN 94
+#define KEY_KPJPCOMMA 95
+#define KEY_KPENTER 96
+#define KEY_RIGHTCTRL 97
+#define KEY_KPSLASH 98
+#define KEY_SYSRQ 99
+#define KEY_RIGHTALT 100
+#define KEY_LINEFEED 101
+#define KEY_HOME 102
+#define KEY_UP 103
+#define KEY_PAGEUP 104
+#define KEY_LEFT 105
+#define KEY_RIGHT 106
+#define KEY_END 107
+#define KEY_DOWN 108
+#define KEY_PAGEDOWN 109
+#define KEY_INSERT 110
+#define KEY_DELETE 111
+#define KEY_MACRO 112
+#define KEY_MUTE 113
+#define KEY_VOLUMEDOWN 114
+#define KEY_VOLUMEUP 115
+#define KEY_POWER 116 /* SC System Power Down */
+#define KEY_KPEQUAL 117
+#define KEY_KPPLUSMINUS 118
+#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA 121
+#define KEY_HANGEUL 122
+#define KEY_HANGUEL KEY_HANGEUL
+#define KEY_HANJA 123
+#define KEY_YEN 124
+#define KEY_LEFTMETA 125
+#define KEY_RIGHTMETA 126
+#define KEY_COMPOSE 127
+
+#define KEY_STOP 128 /* AC Stop */
+#define KEY_AGAIN 129
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
+#define KEY_FRONT 132
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
+#define KEY_SETUP 141
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
+#define KEY_SENDFILE 145
+#define KEY_DELETEFILE 146
+#define KEY_XFER 147
+#define KEY_PROG1 148
+#define KEY_PROG2 149
+#define KEY_WWW 150 /* AL Internet Browser */
+#define KEY_MSDOS 151
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
+#define KEY_DIRECTION 153
+#define KEY_CYCLEWINDOWS 154
+#define KEY_MAIL 155
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+#define KEY_COMPUTER 157
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
+#define KEY_CLOSECD 160
+#define KEY_EJECTCD 161
+#define KEY_EJECTCLOSECD 162
+#define KEY_NEXTSONG 163
+#define KEY_PLAYPAUSE 164
+#define KEY_PREVIOUSSONG 165
+#define KEY_STOPCD 166
+#define KEY_RECORD 167
+#define KEY_REWIND 168
+#define KEY_PHONE 169 /* Media Select Telephone */
+#define KEY_ISO 170
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
+#define KEY_MOVE 175
+#define KEY_EDIT 176
+#define KEY_SCROLLUP 177
+#define KEY_SCROLLDOWN 178
+#define KEY_KPLEFTPAREN 179
+#define KEY_KPRIGHTPAREN 180
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
+
+#define KEY_F13 183
+#define KEY_F14 184
+#define KEY_F15 185
+#define KEY_F16 186
+#define KEY_F17 187
+#define KEY_F18 188
+#define KEY_F19 189
+#define KEY_F20 190
+#define KEY_F21 191
+#define KEY_F22 192
+#define KEY_F23 193
+#define KEY_F24 194
+
+#define KEY_PLAYCD 200
+#define KEY_PAUSECD 201
+#define KEY_PROG3 202
+#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_SUSPEND 205
+#define KEY_CLOSE 206 /* AC Close */
+#define KEY_PLAY 207
+#define KEY_FASTFORWARD 208
+#define KEY_BASSBOOST 209
+#define KEY_PRINT 210 /* AC Print */
+#define KEY_HP 211
+#define KEY_CAMERA 212
+#define KEY_SOUND 213
+#define KEY_QUESTION 214
+#define KEY_EMAIL 215
+#define KEY_CHAT 216
+#define KEY_SEARCH 217
+#define KEY_CONNECT 218
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+#define KEY_SPORT 220
+#define KEY_SHOP 221
+#define KEY_ALTERASE 222
+#define KEY_CANCEL 223 /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN 224
+#define KEY_BRIGHTNESSUP 225
+#define KEY_MEDIA 226
+
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE 228
+#define KEY_KBDILLUMDOWN 229
+#define KEY_KBDILLUMUP 230
+
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
+#define KEY_DOCUMENTS 235
+
+#define KEY_BATTERY 236
+
+#define KEY_BLUETOOTH 237
+#define KEY_WLAN 238
+#define KEY_UWB 239
+
+#define KEY_UNKNOWN 240
+
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC 0x100
+#define BTN_0 0x100
+#define BTN_1 0x101
+#define BTN_2 0x102
+#define BTN_3 0x103
+#define BTN_4 0x104
+#define BTN_5 0x105
+#define BTN_6 0x106
+#define BTN_7 0x107
+#define BTN_8 0x108
+#define BTN_9 0x109
+
+#define BTN_MOUSE 0x110
+#define BTN_LEFT 0x110
+#define BTN_RIGHT 0x111
+#define BTN_MIDDLE 0x112
+#define BTN_SIDE 0x113
+#define BTN_EXTRA 0x114
+#define BTN_FORWARD 0x115
+#define BTN_BACK 0x116
+#define BTN_TASK 0x117
+
+#define BTN_JOYSTICK 0x120
+#define BTN_TRIGGER 0x120
+#define BTN_THUMB 0x121
+#define BTN_THUMB2 0x122
+#define BTN_TOP 0x123
+#define BTN_TOP2 0x124
+#define BTN_PINKIE 0x125
+#define BTN_BASE 0x126
+#define BTN_BASE2 0x127
+#define BTN_BASE3 0x128
+#define BTN_BASE4 0x129
+#define BTN_BASE5 0x12a
+#define BTN_BASE6 0x12b
+#define BTN_DEAD 0x12f
+
+#define BTN_GAMEPAD 0x130
+#define BTN_SOUTH 0x130
+#define BTN_A BTN_SOUTH
+#define BTN_EAST 0x131
+#define BTN_B BTN_EAST
+#define BTN_C 0x132
+#define BTN_NORTH 0x133
+#define BTN_X BTN_NORTH
+#define BTN_WEST 0x134
+#define BTN_Y BTN_WEST
+#define BTN_Z 0x135
+#define BTN_TL 0x136
+#define BTN_TR 0x137
+#define BTN_TL2 0x138
+#define BTN_TR2 0x139
+#define BTN_SELECT 0x13a
+#define BTN_START 0x13b
+#define BTN_MODE 0x13c
+#define BTN_THUMBL 0x13d
+#define BTN_THUMBR 0x13e
+
+#define BTN_DIGI 0x140
+#define BTN_TOOL_PEN 0x140
+#define BTN_TOOL_RUBBER 0x141
+#define BTN_TOOL_BRUSH 0x142
+#define BTN_TOOL_PENCIL 0x143
+#define BTN_TOOL_AIRBRUSH 0x144
+#define BTN_TOOL_FINGER 0x145
+#define BTN_TOOL_MOUSE 0x146
+#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+#define BTN_TOUCH 0x14a
+#define BTN_STYLUS 0x14b
+#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+
+#define BTN_WHEEL 0x150
+#define BTN_GEAR_DOWN 0x150
+#define BTN_GEAR_UP 0x151
+
+#define KEY_OK 0x160
+#define KEY_SELECT 0x161
+#define KEY_GOTO 0x162
+#define KEY_CLEAR 0x163
+#define KEY_POWER2 0x164
+#define KEY_OPTION 0x165
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME 0x167
+#define KEY_VENDOR 0x168
+#define KEY_ARCHIVE 0x169
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+#define KEY_CHANNEL 0x16b
+#define KEY_FAVORITES 0x16c
+#define KEY_EPG 0x16d
+#define KEY_PVR 0x16e /* Media Select Home */
+#define KEY_MHP 0x16f
+#define KEY_LANGUAGE 0x170
+#define KEY_TITLE 0x171
+#define KEY_SUBTITLE 0x172
+#define KEY_ANGLE 0x173
+#define KEY_ZOOM 0x174
+#define KEY_MODE 0x175
+#define KEY_KEYBOARD 0x176
+#define KEY_SCREEN 0x177
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
+#define KEY_SAT2 0x17e
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
+#define KEY_RADIO 0x181
+#define KEY_TUNER 0x182 /* Media Select Tuner */
+#define KEY_PLAYER 0x183
+#define KEY_TEXT 0x184
+#define KEY_DVD 0x185 /* Media Select DVD */
+#define KEY_AUX 0x186
+#define KEY_MP3 0x187
+#define KEY_AUDIO 0x188 /* AL Audio Browser */
+#define KEY_VIDEO 0x189 /* AL Movie Browser */
+#define KEY_DIRECTORY 0x18a
+#define KEY_LIST 0x18b
+#define KEY_MEMO 0x18c /* Media Select Messages */
+#define KEY_CALENDAR 0x18d
+#define KEY_RED 0x18e
+#define KEY_GREEN 0x18f
+#define KEY_YELLOW 0x190
+#define KEY_BLUE 0x191
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+#define KEY_FIRST 0x194
+#define KEY_LAST 0x195 /* Recall Last */
+#define KEY_AB 0x196
+#define KEY_NEXT 0x197
+#define KEY_RESTART 0x198
+#define KEY_SLOW 0x199
+#define KEY_SHUFFLE 0x19a
+#define KEY_BREAK 0x19b
+#define KEY_PREVIOUS 0x19c
+#define KEY_DIGITS 0x19d
+#define KEY_TEEN 0x19e
+#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+#define KEY_IMAGES 0x1ba /* AL Image Browser */
+
+#define KEY_DEL_EOL 0x1c0
+#define KEY_DEL_EOS 0x1c1
+#define KEY_INS_LINE 0x1c2
+#define KEY_DEL_LINE 0x1c3
+
+#define KEY_FN 0x1d0
+#define KEY_FN_ESC 0x1d1
+#define KEY_FN_F1 0x1d2
+#define KEY_FN_F2 0x1d3
+#define KEY_FN_F3 0x1d4
+#define KEY_FN_F4 0x1d5
+#define KEY_FN_F5 0x1d6
+#define KEY_FN_F6 0x1d7
+#define KEY_FN_F7 0x1d8
+#define KEY_FN_F8 0x1d9
+#define KEY_FN_F9 0x1da
+#define KEY_FN_F10 0x1db
+#define KEY_FN_F11 0x1dc
+#define KEY_FN_F12 0x1dd
+#define KEY_FN_1 0x1de
+#define KEY_FN_2 0x1df
+#define KEY_FN_D 0x1e0
+#define KEY_FN_E 0x1e1
+#define KEY_FN_F 0x1e2
+#define KEY_FN_S 0x1e3
+#define KEY_FN_B 0x1e4
+
+#define KEY_BRL_DOT1 0x1f1
+#define KEY_BRL_DOT2 0x1f2
+#define KEY_BRL_DOT3 0x1f3
+#define KEY_BRL_DOT4 0x1f4
+#define KEY_BRL_DOT5 0x1f5
+#define KEY_BRL_DOT6 0x1f6
+#define KEY_BRL_DOT7 0x1f7
+#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
+#define KEY_CAMERA_ZOOMIN 0x215
+#define KEY_CAMERA_ZOOMOUT 0x216
+#define KEY_CAMERA_UP 0x217
+#define KEY_CAMERA_DOWN 0x218
+#define KEY_CAMERA_LEFT 0x219
+#define KEY_CAMERA_RIGHT 0x21a
+
+#define KEY_ATTENDANT_ON 0x21b
+#define KEY_ATTENDANT_OFF 0x21c
+#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
+#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+
+#define BTN_DPAD_UP 0x220
+#define BTN_DPAD_DOWN 0x221
+#define BTN_DPAD_LEFT 0x222
+#define BTN_DPAD_RIGHT 0x223
+
+#define MATRIX_KEY(row, col, code) \
+ ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
+
+#endif /* _DT_BINDINGS_INPUT_INPUT_H */
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 3/9] dt-bindings: import irq.h
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
2014-01-13 0:17 ` [PATCH 2/9] dt-bindings: import input.h Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 4/9] ARM: imx6: update pin related DT headers Lucas Stach
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Straight copy from the Linux kernel.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
include/dt-bindings/interrupt-controller/irq.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 include/dt-bindings/interrupt-controller/irq.h
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 0000000..33a1003
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,19 @@
+/*
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 4/9] ARM: imx6: update pin related DT headers
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
2014-01-13 0:17 ` [PATCH 2/9] dt-bindings: import input.h Lucas Stach
2014-01-13 0:17 ` [PATCH 3/9] dt-bindings: import irq.h Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 5/9] ARM: imx6: update base DTs Lucas Stach
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Needed to be able to update other i.MX 6 DTs properly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/imx6dl-pinfunc.h | 2 +
arch/arm/dts/imx6q-pinfunc.h | 10 +++--
arch/arm/dts/imx6qdl-pingrp.h | 94 +++++++++++++++++++++++--------------------
3 files changed, 58 insertions(+), 48 deletions(-)
diff --git a/arch/arm/dts/imx6dl-pinfunc.h b/arch/arm/dts/imx6dl-pinfunc.h
index b81a7a4..0ead323 100644
--- a/arch/arm/dts/imx6dl-pinfunc.h
+++ b/arch/arm/dts/imx6dl-pinfunc.h
@@ -755,6 +755,7 @@
#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2
#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0
#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x234 0x604 0x03c 0x11 0xff000609
#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2
#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0
#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0
@@ -950,6 +951,7 @@
#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0
#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0
#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x2dc 0x6c4 0x000 0x2 0x0
#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0
#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0
#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/dts/imx6q-pinfunc.h b/arch/arm/dts/imx6q-pinfunc.h
index c0e38a4..9fc6120 100644
--- a/arch/arm/dts/imx6q-pinfunc.h
+++ b/arch/arm/dts/imx6q-pinfunc.h
@@ -207,8 +207,8 @@
#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1
#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1
#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c8 0x3dc 0x924 0x4 0x1
#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0
#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0
#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0
@@ -536,7 +536,7 @@
#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS 0x1d4 0x4e8 0x85c 0x2 0x0
#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1d4 0x4e8 0x000 0x5 0x0
#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK 0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1d8 0x4ec 0x004 0x0 0xff0d0100
#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1d8 0x4ec 0x000 0x1 0x0
#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK 0x1d8 0x4ec 0x864 0x2 0x0
#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1d8 0x4ec 0x914 0x3 0x1
@@ -654,7 +654,7 @@
#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK 0x224 0x5f4 0x86c 0x0 0x1
#define MX6QDL_PAD_GPIO_1__WDOG2_B 0x224 0x5f4 0x000 0x1 0x0
#define MX6QDL_PAD_GPIO_1__KEY_ROW5 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x224 0x5f4 0x004 0x3 0xff0d0101
#define MX6QDL_PAD_GPIO_1__PWM2_OUT 0x224 0x5f4 0x000 0x4 0x0
#define MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x224 0x5f4 0x000 0x5 0x0
#define MX6QDL_PAD_GPIO_1__SD1_CD_B 0x224 0x5f4 0x000 0x6 0x0
@@ -673,6 +673,7 @@
#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1
#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1
#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x230 0x600 0x03c 0x11 0xff000609
#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1
#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0
#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0
@@ -1024,6 +1025,7 @@
#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0
#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0
#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x350 0x738 0x000 0x2 0x0
#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0
#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0
#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0
diff --git a/arch/arm/dts/imx6qdl-pingrp.h b/arch/arm/dts/imx6qdl-pingrp.h
index 8d71b13..082f0df 100644
--- a/arch/arm/dts/imx6qdl-pingrp.h
+++ b/arch/arm/dts/imx6qdl-pingrp.h
@@ -32,6 +32,12 @@
MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0 \
MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+#define MX6QDL_AUDMUX_PINGRP5 \
+ MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 \
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 \
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 \
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+
#define MX6QDL_ECSPI1_PINGRP1 \
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 \
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 \
@@ -47,59 +53,59 @@
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 \
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+#define MX6QDL_ENET_PINGRP_RGMII(rx_pad, tx_pad) \
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC rx_pad \
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 rx_pad \
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 rx_pad \
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 rx_pad \
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 rx_pad \
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL rx_pad \
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC tx_pad \
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 tx_pad \
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 tx_pad \
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 tx_pad \
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 tx_pad \
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL tx_pad \
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK tx_pad
+
+#define MX6QDL_ENET_PINGRP_RGMII_MD(rx_pad, tx_pad) \
+ MX6QDL_ENET_PINGRP_RGMII(rx_pad, tx_pad) \
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO tx_pad \
+ MX6QDL_PAD_ENET_MDC__ENET_MDC tx_pad
+
#define MX6QDL_ENET_PINGRP1 \
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 \
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 \
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 \
+ MX6QDL_ENET_PINGRP_RGMII_MD(0x1b0b0, 0x1b0b0) \
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
#define MX6QDL_ENET_PINGRP2 \
+ MX6QDL_ENET_PINGRP_RGMII(0x1b0b0, 0x1b0b0) \
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 \
- MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 \
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 \
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
#define MX6QDL_ENET_PINGRP3 \
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 \
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 \
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 \
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 \
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 \
+ MX6QDL_ENET_PINGRP_RGMII_MD(0x1b0b0, 0x1b0b0) \
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+#define MX6QDL_ENET_PINGRP4 \
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 \
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 \
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 \
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 \
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 \
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 \
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+#define MX6QDL_ENET_PINGRP1_GPIO6 MX6QDL_ENET_PINGRP1 \
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+
+#define MX6QDL_ENET_PINGRP2_GPIO6 MX6QDL_ENET_PINGRP2 \
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+
+#define MX6QDL_ENET_PINGRP3_GPIO6 MX6QDL_ENET_PINGRP3 \
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+
#define MX6QDL_ESAI_PINGRP1 \
MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030 \
MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 \
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 5/9] ARM: imx6: update base DTs
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (2 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 4/9] ARM: imx6: update pin related DT headers Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 6/9] ARM: imx6: split sabrelite DT Lucas Stach
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Upgrade to linux-next version.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/imx6dl.dtsi | 35 +++-
arch/arm/dts/imx6q-phytec-pfla02.dtsi | 2 +-
arch/arm/dts/imx6q.dtsi | 70 +++++++-
arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +-
arch/arm/dts/imx6qdl-sabresd.dtsi | 2 +-
arch/arm/dts/imx6qdl-tqma6x.dtsi | 2 +-
arch/arm/dts/imx6qdl.dtsi | 283 ++++++++++++++++++++------------
7 files changed, 280 insertions(+), 116 deletions(-)
diff --git a/arch/arm/dts/imx6dl.dtsi b/arch/arm/dts/imx6dl.dtsi
index cdf31c7..e2ec0fb 100644
--- a/arch/arm/dts/imx6dl.dtsi
+++ b/arch/arm/dts/imx6dl.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6dl-pinfunc.h"
#include "imx6qdl-pingrp.h"
#include "imx6qdl.dtsi"
@@ -22,6 +23,26 @@
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 1075000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+ <&clks 17>, <&clks 170>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
cpu@1 {
@@ -33,6 +54,12 @@
};
soc {
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks 142>;
+ };
+
aips1: aips-bus@02000000 {
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6dl-iomuxc";
@@ -40,17 +67,17 @@
pxp: pxp@020f0000 {
reg = <0x020f0000 0x4000>;
- interrupts = <0 98 0x04>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
epdc: epdc@020f4000 {
reg = <0x020f4000 0x4000>;
- interrupts = <0 97 0x04>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
lcdif: lcdif@020f8000 {
reg = <0x020f8000 0x4000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -60,7 +87,7 @@
#size-cells = <0>;
compatible = "fsl,imx1-i2c";
reg = <0x021f8000 0x4000>;
- interrupts = <0 35 0x04>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
diff --git a/arch/arm/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
index b615491..402eee8 100644
--- a/arch/arm/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
@@ -216,7 +216,7 @@
};
};
-&ocotp1 {
+&ocotp {
barebox,provide-mac-address = <&fec 0x620>;
};
diff --git a/arch/arm/dts/imx6q.dtsi b/arch/arm/dts/imx6q.dtsi
index 84ed89e..021e0cb 100644
--- a/arch/arm/dts/imx6q.dtsi
+++ b/arch/arm/dts/imx6q.dtsi
@@ -8,15 +8,12 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q-pinfunc.h"
#include "imx6qdl-pingrp.h"
#include "imx6qdl.dtsi"
/ {
- aliases {
- spi4 = &ecspi5;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -31,7 +28,14 @@
1200000 1275000
996000 1250000
792000 1150000
- 396000 950000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 104>, <&clks 6>, <&clks 16>,
@@ -66,6 +70,12 @@
};
soc {
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x40000>;
+ clocks = <&clks 142>;
+ };
+
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi5: ecspi@02018000 {
@@ -73,7 +83,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
- interrupts = <0 35 0x04>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
status = "disabled";
@@ -82,14 +92,60 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
+
+ ipu2 {
+ pinctrl_ipu2_1: ipu2grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0x10
+ MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04 0x80000000
+ MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23 0x10
+ >;
+ };
+ };
};
};
+ sata: sata@02200000 {
+ compatible = "fsl,imx6q-ahci";
+ reg = <0x02200000 0x4000>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 154>, <&clks 187>, <&clks 105>;
+ clock-names = "sata", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
- interrupts = <0 8 0x4 0 7 0x4>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
diff --git a/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
index 5744147..3d5d8bb 100644
--- a/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -96,7 +96,7 @@
};
};
-&ocotp1 {
+&ocotp {
barebox,provide-mac-address = <&fec 0x620>;
};
diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index b64611c..346e32a 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -257,7 +257,7 @@
};
};
-&ocotp1 {
+&ocotp {
barebox,provide-mac-address = <&fec 0x620>;
};
diff --git a/arch/arm/dts/imx6qdl-tqma6x.dtsi b/arch/arm/dts/imx6qdl-tqma6x.dtsi
index e3d18d4..55f0525 100644
--- a/arch/arm/dts/imx6qdl-tqma6x.dtsi
+++ b/arch/arm/dts/imx6qdl-tqma6x.dtsi
@@ -29,7 +29,7 @@
phy-mode = "rgmii";
};
-&ocotp1 {
+&ocotp {
barebox,provide-mac-address = <&fec 0x620>;
};
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index 9e0276c..8948016 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -14,11 +14,8 @@
/ {
aliases {
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
+ can0 = &can1;
+ can1 = &can2;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -26,14 +23,20 @@
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- mmc3 = &usdhc4;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
};
intc: interrupt-controller@00a01000 {
@@ -76,7 +79,10 @@
dma_apbh: dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
- interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
@@ -89,15 +95,14 @@
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <0 13 0x04>, <0 15 0x04>;
- interrupt-names = "gpmi-dma", "bch";
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
clocks = <&clks 152>, <&clks 153>, <&clks 151>,
<&clks 150>, <&clks 149>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
- fsl,gpmi-dma-channel = <0>;
status = "disabled";
};
@@ -111,14 +116,32 @@
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ pcie: pcie@0x01000000 {
+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+ reg = <0x01ffc000 0x4000>; /* DBI */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+ status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
aips-bus@02000000 { /* AIPS1 */
@@ -136,8 +159,23 @@
ranges;
spdif: spdif@02004000 {
+ compatible = "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>,
+ <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 197>, <&clks 3>,
+ <&clks 197>, <&clks 107>,
+ <&clks 0>, <&clks 118>,
+ <&clks 0>, <&clks 139>,
+ <&clks 0>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7";
+ status = "disabled";
};
ecspi1: ecspi@02008000 {
@@ -145,7 +183,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 112>, <&clks 112>;
clock-names = "ipg", "per";
status = "disabled";
@@ -156,7 +194,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 113>, <&clks 113>;
clock-names = "ipg", "per";
status = "disabled";
@@ -167,7 +205,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 114>, <&clks 114>;
clock-names = "ipg", "per";
status = "disabled";
@@ -178,7 +216,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 115>, <&clks 115>;
clock-names = "ipg", "per";
status = "disabled";
@@ -187,22 +225,27 @@
uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
esai: esai@02024000 {
reg = <0x02024000 0x4000>;
- interrupts = <0 51 0x04>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
};
ssi1: ssi@02028000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 178>;
+ dmas = <&sdma 37 1 0>,
+ <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <38 37>;
status = "disabled";
@@ -211,8 +254,11 @@
ssi2: ssi@0202c000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 179>;
+ dmas = <&sdma 41 1 0>,
+ <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <42 41>;
status = "disabled";
@@ -221,8 +267,11 @@
ssi3: ssi@02030000 {
compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 180>;
+ dmas = <&sdma 45 1 0>,
+ <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <46 45>;
status = "disabled";
@@ -230,7 +279,7 @@
asrc: asrc@02034000 {
reg = <0x02034000 0x4000>;
- interrupts = <0 50 0x04>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
spba@0203c000 {
@@ -240,7 +289,8 @@
vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
- interrupts = <0 3 0x04 0 12 0x04>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
aipstz@0207c000 { /* AIPSTZ1 */
@@ -251,7 +301,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 145>;
clock-names = "ipg", "per";
};
@@ -260,7 +310,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 146>;
clock-names = "ipg", "per";
};
@@ -269,7 +319,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 147>;
clock-names = "ipg", "per";
};
@@ -278,25 +328,33 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 148>;
clock-names = "ipg", "per";
};
can1: flexcan@02090000 {
+ compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
- interrupts = <0 110 0x04>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 108>, <&clks 109>;
+ clock-names = "ipg", "per";
+ status = "disabled";
};
can2: flexcan@02094000 {
+ compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
- interrupts = <0 111 0x04>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 110>, <&clks 111>;
+ clock-names = "ipg", "per";
+ status = "disabled";
};
gpt: gpt@02098000 {
compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 119>, <&clks 120>;
clock-names = "ipg", "per";
};
@@ -304,7 +362,8 @@
gpio1: gpio@0209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -314,7 +373,8 @@
gpio2: gpio@020a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -324,7 +384,8 @@
gpio3: gpio@020a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -334,7 +395,8 @@
gpio4: gpio@020a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -344,7 +406,8 @@
gpio5: gpio@020ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -354,7 +417,8 @@
gpio6: gpio@020b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
- interrupts = <0 76 0x04 0 77 0x04>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+ <0 77 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -364,7 +428,8 @@
gpio7: gpio@020b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
- interrupts = <0 78 0x04 0 79 0x04>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 79 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -373,20 +438,20 @@
kpp: kpp@020b8000 {
reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 0>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 0>;
status = "disabled";
};
@@ -394,14 +459,17 @@
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
@@ -447,7 +515,7 @@
reg_arm: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
+ regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
@@ -497,18 +565,28 @@
};
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6q-tempmon";
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks 172>;
+ };
+
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 182>;
+ fsl,anatop = <&anatop>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 183>;
+ fsl,anatop = <&anatop>;
};
snvs@020cc000 {
@@ -520,31 +598,34 @@
snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src@020d8000 {
compatible = "fsl,imx6q-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04 0 90 0x04>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
};
gpr: iomuxc-gpr@020e0000 {
@@ -566,33 +647,32 @@
lvds-channel@0 {
reg = <0>;
- crtcs = <&ipu1 0>;
status = "disabled";
};
lvds-channel@1 {
reg = <1>;
- crtcs = <&ipu1 1>;
status = "disabled";
};
};
dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
- interrupts = <0 124 0x04>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
};
dcic2: dcic@020e8000 {
reg = <0x020e8000 0x4000>;
- interrupts = <0 125 0x04>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 155>, <&clks 155>;
clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
};
@@ -606,7 +686,8 @@
caam@02100000 {
reg = <0x02100000 0x40000>;
- interrupts = <0 105 0x04 0 106 0x04>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>;
};
aipstz@0217c000 { /* AIPSTZ2 */
@@ -616,7 +697,7 @@
usbotg: usb@02184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
@@ -626,7 +707,7 @@
usbh1: usb@02184200 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
- interrupts = <0 40 0x04>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
@@ -636,7 +717,7 @@
usbh2: usb@02184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
- interrupts = <0 41 0x04>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
@@ -645,7 +726,7 @@
usbh3: usb@02184600 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
- interrupts = <0 42 0x04>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
@@ -661,7 +742,9 @@
fec: ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
- interrupts = <0 118 0x04 0 119 0x04>;
+ interrupts-extended =
+ <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 117>, <&clks 117>, <&clks 190>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@@ -669,13 +752,15 @@
mlb@0218c000 {
reg = <0x0218c000 0x4000>;
- interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+ <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>;
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -685,7 +770,7 @@
usdhc2: usdhc@02194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -695,7 +780,7 @@
usdhc3: usdhc@02198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -705,7 +790,7 @@
usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -717,7 +802,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 125>;
status = "disabled";
};
@@ -727,7 +812,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 126>;
status = "disabled";
};
@@ -737,7 +822,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
+ interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 127>;
status = "disabled";
};
@@ -755,29 +840,26 @@
reg = <0x021b4000 0x4000>;
};
- weim@021b8000 {
+ weim: weim@021b8000 {
+ compatible = "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 196>;
};
- ocotp1: ocotp@021bc000 {
- compatible = "fsl,imx6q-ocotp";
+ ocotp: ocotp@021bc000 {
+ compatible = "fsl,imx6q-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
};
- ocotp2: ocotp@021c0000 {
- reg = <0x021c0000 0x4000>;
- interrupts = <0 21 0x04>;
- };
-
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
- interrupts = <0 108 0x04>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
};
tzasc@021d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
- interrupts = <0 109 0x04>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
};
audmux: audmux@021d8000 {
@@ -786,7 +868,7 @@
status = "disabled";
};
- mipi@021dc000 { /* MIPI-CSI */
+ mipi_csi: mipi@021dc000 {
reg = <0x021dc000 0x4000>;
};
@@ -796,61 +878,60 @@
vdoa@021e4000 {
reg = <0x021e4000 0x4000>;
- interrupts = <0 18 0x04>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
};
uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
- interrupts = <0 27 0x04>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
- interrupts = <0 28 0x04>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
- interrupts = <0 29 0x04>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts = <0 30 0x04>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
- sata: sata@02200000 {
- compatible = "fsl,imx6q-ahci";
- reg = <0x02200000 0x4000>;
- interrupts = <0 39 0x04>;
- clocks = <&clks 154 &clks 105 &clks 187>;
- clock-names = "ipg", "ahb", "per";
- gprreg = <&gpr>;
- status = "disabled";
- };
-
ipu1: ipu@02400000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02400000 0x400000>;
- interrupts = <0 6 0x4 0 5 0x4>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 6/9] ARM: imx6: split sabrelite DT
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (3 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 5/9] ARM: imx6: update base DTs Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 7/9] ARM: imx6: add support for DL variant of SabreLite Board Lucas Stach
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Split out common QDL parts into shared include file.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/imx6q-sabrelite.dts | 242 +--------------------
arch/arm/dts/imx6qdl-sabrelite.dtsi | 413 ++++++++++++++++++++++++++++++++++++
2 files changed, 414 insertions(+), 241 deletions(-)
create mode 100644 arch/arm/dts/imx6qdl-sabrelite.dtsi
diff --git a/arch/arm/dts/imx6q-sabrelite.dts b/arch/arm/dts/imx6q-sabrelite.dts
index 5ef994d..96e4688 100644
--- a/arch/arm/dts/imx6q-sabrelite.dts
+++ b/arch/arm/dts/imx6q-sabrelite.dts
@@ -12,253 +12,13 @@
/dts-v1/;
#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
/ {
model = "Freescale i.MX6 Quad SABRE Lite Board";
compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
- chosen {
- linux,stdout-path = &uart2;
-
- environment@0 {
- compatible = "barebox,environment";
- device-path = &flash, "partname:barebox-environment";
- };
- };
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_2p5v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
-
- flash: m25p80@0 {
- compatible = "sst,sst25vf016b", "m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0x80000>;
- };
-
- partition@1 {
- label = "barebox-environment";
- reg = <0x80000 0x80000>;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 201>;
- VDDA-supply = <®_2p5v>;
- VDDIO-supply = <®_3p3v>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- imx6q-sabrelite {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
- MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
- >;
- };
-
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
- };
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <MX6QDL_ENET_PINGRP1>;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <MX6QDL_I2C1_PINGRP1>;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <MX6QDL_UART2_PINGRP1>;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
- };
- };
-};
-
-&ldb {
- status = "okay";
-
- lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- };
-};
-
-&ocotp1 {
- barebox,provide-mac-address = <&fec 0x620>;
};
&sata {
status = "okay";
};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbh1 {
- phy-mode = "utmi";
- dr_mode = "host";
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- disable-over-current;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
- wp-gpios = <&gpio2 7 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6qdl-sabrelite.dtsi b/arch/arm/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 0000000..61485d1
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,413 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+ chosen {
+ linux,stdout-path = &uart2;
+
+ environment@0 {
+ compatible = "barebox,environment";
+ device-path = &flash, "partname:barebox-environment";
+ };
+ };
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+
+ backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b", "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x80000 0x80000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-sabrelite {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_ECSPI1_PINGRP1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_ENET_PINGRP_RGMII_MD(0x1b0b0, 0x100b0)
+ /* Phy reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX6QDL_UART1_PINGRP2>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX6QDL_UART2_PINGRP1>;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_USDHC3_PINGRP_D4
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_USDHC4_PINGRP_D4
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 7/9] ARM: imx6: add support for DL variant of SabreLite Board
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (4 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 6/9] ARM: imx6: split sabrelite DT Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 8/9] ARM: imx6: add initial support for Nitrogen6X boards Lucas Stach
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/freescale-mx6-sabrelite/board.c | 9 ++++++---
arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c | 15 ++++++++++++++-
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/imx6dl-sabrelite.dts | 20 ++++++++++++++++++++
images/Makefile.imx | 11 ++++++++---
5 files changed, 50 insertions(+), 8 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-sabrelite.dts
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
index badfd9e..2d79c36 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
@@ -116,7 +116,8 @@ static void sabrelite_ehci_init(void)
static int sabrelite_devices_init(void)
{
- if (!of_machine_is_compatible("fsl,imx6q-sabrelite"))
+ if (!of_machine_is_compatible("fsl,imx6q-sabrelite") &&
+ !of_machine_is_compatible("fsl,imx6dl-sabrelite"))
return 0;
sabrelite_ehci_init();
@@ -132,7 +133,8 @@ device_initcall(sabrelite_devices_init);
static int sabrelite_coredevices_init(void)
{
- if (!of_machine_is_compatible("fsl,imx6q-sabrelite"))
+ if (!of_machine_is_compatible("fsl,imx6q-sabrelite") &&
+ !of_machine_is_compatible("fsl,imx6dl-sabrelite"))
return 0;
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
@@ -143,7 +145,8 @@ coredevice_initcall(sabrelite_coredevices_init);
static int sabrelite_postcore_init(void)
{
- if (!of_machine_is_compatible("fsl,imx6q-sabrelite"))
+ if (!of_machine_is_compatible("fsl,imx6q-sabrelite") &&
+ !of_machine_is_compatible("fsl,imx6dl-sabrelite"))
return 0;
imx6_init_lowlevel();
diff --git a/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c b/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
index b36a39c..14a7f32 100644
--- a/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
+++ b/arch/arm/boards/freescale-mx6-sabrelite/lowlevel.c
@@ -5,7 +5,7 @@
extern char __dtb_imx6q_sabrelite_start[];
-ENTRY_FUNCTION(start_imx6_sabrelite, r0, r1, r2)
+ENTRY_FUNCTION(start_imx6q_sabrelite, r0, r1, r2)
{
uint32_t fdt;
@@ -15,3 +15,16 @@ ENTRY_FUNCTION(start_imx6_sabrelite, r0, r1, r2)
barebox_arm_entry(0x10000000, SZ_1G, fdt);
}
+
+extern char __dtb_imx6dl_sabrelite_start[];
+
+ENTRY_FUNCTION(start_imx6dl_sabrelite, r0, r1, r2)
+{
+ uint32_t fdt;
+
+ arm_cpu_lowlevel_init();
+
+ fdt = (uint32_t)__dtb_imx6dl_sabrelite_start - get_runtime_offset();
+
+ barebox_arm_entry(0x10000000, SZ_1G, fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bc314e9..90ac28d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
imx6q-dfi-fs700-m60-6q.dtb \
imx6q-dmo-realq7.dtb \
imx6q-sabrelite.dtb \
+ imx6dl-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6dl-mba6x.dtb \
imx6q-mba6x.dtb \
@@ -43,7 +44,7 @@ pbl-$(CONFIG_MACH_TQMA6X) += imx6dl-mba6x.dtb.o imx6q-mba6x.dtb.o
pbl-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o
pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
pbl-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += imx6dl-cubox-i-carrier-1.dtb.o
-pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o
+pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
.SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S
.SECONDARY: $(patsubst %,$(obj)/%.S,$(dtb-y))
diff --git a/arch/arm/dts/imx6dl-sabrelite.dts b/arch/arm/dts/imx6dl-sabrelite.dts
new file mode 100644
index 0000000..2de0447
--- /dev/null
+++ b/arch/arm/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+ model = "Freescale i.MX6 DualLite SABRE Lite Board";
+ compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 49c7e3e..e98204f 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -72,11 +72,16 @@ CFG_start_imx6q_dfi_fs700_m60_6q.pblx.imximg = $(board)/dfi-fs700-m60/flash-head
FILE_barebox-dfi-fs700-m60-6q.img = start_imx6q_dfi_fs700_m60_6q.pblx.imximg
image-$(CONFIG_MACH_DFI_FS700_M60) += barebox-dfi-fs700-m60-6q.img
-pblx-$(CONFIG_MACH_SABRELITE) += start_imx6_sabrelite
-CFG_start_imx6_sabrelite.pblx.imximg = $(board)/freescale-mx6-sabrelite/flash-header-mx6-sabrelite.imxcfg
-FILE_barebox-freescale-imx6q-sabrelite.img = start_imx6_sabrelite.pblx.imximg
+pblx-$(CONFIG_MACH_SABRELITE) += start_imx6q_sabrelite
+CFG_start_imx6q_sabrelite.pblx.imximg = $(board)/freescale-mx6-sabrelite/flash-header-mx6-sabrelite.imxcfg
+FILE_barebox-freescale-imx6q-sabrelite.img = start_imx6q_sabrelite.pblx.imximg
image-$(CONFIG_MACH_SABRELITE) += barebox-freescale-imx6q-sabrelite.img
+pblx-$(CONFIG_MACH_SABRELITE) += start_imx6dl_sabrelite
+CFG_start_imx6dl_sabrelite.pblx.imximg = $(board)/freescale-mx6-sabrelite/flash-header-mx6-sabrelite.imxcfg
+FILE_barebox-freescale-imx6dl-sabrelite.img = start_imx6dl_sabrelite.pblx.imximg
+image-$(CONFIG_MACH_SABRELITE) += barebox-freescale-imx6dl-sabrelite.img
+
pblx-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += start_imx6dl_cubox_i_carrier_1
CFG_start_imx6dl_cubox_i_carrier_1.pblx.imximg = $(board)/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
FILE_barebox-cubox-i-carrier-1.img = start_imx6dl_cubox_i_carrier_1.pblx.imximg
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 8/9] ARM: imx6: add initial support for Nitrogen6X boards
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (5 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 7/9] ARM: imx6: add support for DL variant of SabreLite Board Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-13 0:17 ` [PATCH 9/9] ARM: imx6: rename Carrier-1 to Hummingboard Lucas Stach
2014-01-14 16:22 ` [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Only the 1GB variant is supported for now, as I don't
have anything other to test with.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/Makefile | 1 +
.../arm/boards/boundarydevices-nitrogen6x/Makefile | 3 +
arch/arm/boards/boundarydevices-nitrogen6x/board.c | 77 ++++
.../boundarydevices-nitrogen6x/env/config-board | 6 +
| 106 ++++++
.../boards/boundarydevices-nitrogen6x/lowlevel.c | 30 ++
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/imx6dl-nitrogen6x.dts | 21 ++
arch/arm/dts/imx6q-nitrogen6x.dts | 25 ++
arch/arm/dts/imx6qdl-nitrogen6x.dtsi | 412 +++++++++++++++++++++
arch/arm/mach-imx/Kconfig | 4 +
images/Makefile.imx | 10 +
12 files changed, 699 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/boundarydevices-nitrogen6x/Makefile
create mode 100644 arch/arm/boards/boundarydevices-nitrogen6x/board.c
create mode 100644 arch/arm/boards/boundarydevices-nitrogen6x/env/config-board
create mode 100644 arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
create mode 100644 arch/arm/boards/boundarydevices-nitrogen6x/lowlevel.c
create mode 100644 arch/arm/dts/imx6dl-nitrogen6x.dts
create mode 100644 arch/arm/dts/imx6q-nitrogen6x.dts
create mode 100644 arch/arm/dts/imx6qdl-nitrogen6x.dtsi
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index bb26941..7f56359 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MACH_AT91SAM9N12EK) += at91sam9n12ek/
obj-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek/
obj-$(CONFIG_MACH_BEAGLE) += beagle/
obj-$(CONFIG_MACH_BEAGLEBONE) += beaglebone/
+obj-$(CONFIG_MACH_NITROGEN6X) += boundarydevices-nitrogen6x/
obj-$(CONFIG_MACH_CCMX51) += ccxmx51/
obj-$(CONFIG_MACH_CFA10036) += crystalfontz-cfa10036/
obj-$(CONFIG_MACH_CHUMBY) += chumby_falconwing/
diff --git a/arch/arm/boards/boundarydevices-nitrogen6x/Makefile b/arch/arm/boards/boundarydevices-nitrogen6x/Makefile
new file mode 100644
index 0000000..177c5d8
--- /dev/null
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/Makefile
@@ -0,0 +1,3 @@
+obj-y += board.o flash-header-nitrogen6x-1g.dcd.o
+extra-y += flash-header-nitrogen6x-1g.dcd.S flash-header-nitrogen6x-1g.dcd
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/boundarydevices-nitrogen6x/board.c b/arch/arm/boards/boundarydevices-nitrogen6x/board.c
new file mode 100644
index 0000000..1c4b495
--- /dev/null
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/board.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2014 Lucas Stach, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <environment.h>
+#include <mach/bbu.h>
+#include <linux/phy.h>
+#include <linux/micrel_phy.h>
+#include <mach/imx6.h>
+
+static int nitrogen6x_devices_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6dl-nitrogen6x") &&
+ !of_machine_is_compatible("fsl,imx6q-nitrogen6x"))
+ return 0;
+
+ imx6_bbu_internal_spi_i2c_register_handler("spiflash", "/dev/m25p0.barebox",
+ BBU_HANDLER_FLAG_DEFAULT, NULL, 0, 0);
+
+ return 0;
+}
+device_initcall(nitrogen6x_devices_init);
+
+static int ksz9021rn_phy_fixup(struct phy_device *dev)
+{
+ phy_write(dev, 0x09, 0x0f00);
+
+ /* do same as linux kernel */
+ /* min rx data delay */
+ phy_write(dev, 0x0b, 0x8105);
+ phy_write(dev, 0x0c, 0x0000);
+
+ /* max rx/tx clock delay, min rx/tx control delay */
+ phy_write(dev, 0x0b, 0x8104);
+ phy_write(dev, 0x0c, 0xf0f0);
+ phy_write(dev, 0x0b, 0x104);
+
+ return 0;
+}
+
+static int nitrogen6x_coredevices_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6dl-nitrogen6x") &&
+ !of_machine_is_compatible("fsl,imx6q-nitrogen6x"))
+ return 0;
+
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+ return 0;
+}
+coredevice_initcall(nitrogen6x_coredevices_init);
+
+static int nitrogen6x_postcore_init(void)
+{
+ if (!of_machine_is_compatible("fsl,imx6dl-nitrogen6x") &&
+ !of_machine_is_compatible("fsl,imx6q-nitrogen6x"))
+ return 0;
+
+ imx6_init_lowlevel();
+
+ barebox_set_hostname("nitrogen6x");
+
+ return 0;
+}
+postcore_initcall(nitrogen6x_postcore_init);
diff --git a/arch/arm/boards/boundarydevices-nitrogen6x/env/config-board b/arch/arm/boards/boundarydevices-nitrogen6x/env/config-board
new file mode 100644
index 0000000..4cabac6
--- /dev/null
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/env/config-board
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.linux.bootargs.base="console=ttymxc1,115200"
--git a/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg b/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
new file mode 100644
index 0000000..60a39fe
--- /dev/null
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
@@ -0,0 +1,106 @@
+soc imx6
+loadaddr 0x20000000
+dcdofs 0x400
+
+wm 32 0x020e05a8 0x00000030
+wm 32 0x020e05b0 0x00000030
+wm 32 0x020e0524 0x00000030
+wm 32 0x020e051c 0x00000030
+wm 32 0x020e0518 0x00000030
+wm 32 0x020e050c 0x00000030
+wm 32 0x020e05b8 0x00000030
+wm 32 0x020e05c0 0x00000030
+wm 32 0x020e05ac 0x00020030
+wm 32 0x020e05b4 0x00020030
+wm 32 0x020e0528 0x00020030
+wm 32 0x020e0520 0x00020030
+wm 32 0x020e0514 0x00020030
+wm 32 0x020e0510 0x00020030
+wm 32 0x020e05bc 0x00020030
+wm 32 0x020e05c4 0x00020030
+wm 32 0x020e056c 0x00020030
+wm 32 0x020e0578 0x00020030
+wm 32 0x020e0588 0x00020030
+wm 32 0x020e0594 0x00020030
+wm 32 0x020e057c 0x00020030
+wm 32 0x020e0590 0x00003000
+wm 32 0x020e0598 0x00003000
+wm 32 0x020e058c 0x00000000
+wm 32 0x020e059c 0x00003030
+wm 32 0x020e05a0 0x00003030
+wm 32 0x020e0784 0x00000030
+wm 32 0x020e0788 0x00000030
+wm 32 0x020e0794 0x00000030
+wm 32 0x020e079c 0x00000030
+wm 32 0x020e07a0 0x00000030
+wm 32 0x020e07a4 0x00000030
+wm 32 0x020e07a8 0x00000030
+wm 32 0x020e0748 0x00000030
+wm 32 0x020e074c 0x00000030
+wm 32 0x020e0750 0x00020000
+wm 32 0x020e0758 0x00000000
+wm 32 0x020e0774 0x00020000
+wm 32 0x020e078c 0x00000030
+wm 32 0x020e0798 0x000c0000
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+wm 32 0x021b0018 0x00081740
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b000c 0x555a7975
+wm 32 0x021b0010 0xff538e64
+wm 32 0x021b0014 0x01ff00db
+wm 32 0x021b002c 0x000026d2
+wm 32 0x021b0030 0x005b0e21
+wm 32 0x021b0008 0x09444040
+wm 32 0x021b0004 0x00025576
+wm 32 0x021b0040 0x00000027
+wm 32 0x021b0000 0x831a0000
+wm 32 0x021b001c 0x04088032
+wm 32 0x021b001c 0x0408803a
+wm 32 0x021b001c 0x00008033
+wm 32 0x021b001c 0x0000803b
+wm 32 0x021b001c 0x00428031
+wm 32 0x021b001c 0x00428039
+wm 32 0x021b001c 0x09408030
+wm 32 0x021b001c 0x09408038
+wm 32 0x021b001c 0x04008040
+wm 32 0x021b001c 0x04008048
+wm 32 0x021b0800 0xa1380003
+wm 32 0x021b4800 0xa1380003
+wm 32 0x021b0020 0x00005800
+wm 32 0x021b0818 0x00022227
+wm 32 0x021b4818 0x00022227
+wm 32 0x021b083c 0x434b0350
+wm 32 0x021b0840 0x034c0359
+wm 32 0x021b483c 0x434b0350
+wm 32 0x021b4840 0x03650348
+wm 32 0x021b0848 0x4436383b
+wm 32 0x021b4848 0x39393341
+wm 32 0x021b0850 0x35373933
+wm 32 0x021b4850 0x48254A36
+wm 32 0x021b080c 0x001f001f
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044
+wm 32 0x021b4810 0x00440044
+wm 32 0x021b08b8 0x00000800
+wm 32 0x021b48b8 0x00000800
+wm 32 0x021b001c 0x00000000
+wm 32 0x021b0404 0x00011006
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+/* enable AXI cache for VDOA/VPU/IPU */
+wm 32 0x020e0010 0xf00000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7 */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
diff --git a/arch/arm/boards/boundarydevices-nitrogen6x/lowlevel.c b/arch/arm/boards/boundarydevices-nitrogen6x/lowlevel.c
new file mode 100644
index 0000000..5b11084
--- /dev/null
+++ b/arch/arm/boards/boundarydevices-nitrogen6x/lowlevel.c
@@ -0,0 +1,30 @@
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_imx6q_nitrogen6x_start[];
+
+ENTRY_FUNCTION(start_imx6q_nitrogen6x_1g, r0, r1, r2)
+{
+ uint32_t fdt;
+
+ arm_cpu_lowlevel_init();
+
+ fdt = (uint32_t)__dtb_imx6q_nitrogen6x_start - get_runtime_offset();
+
+ barebox_arm_entry(0x10000000, SZ_1G, fdt);
+}
+
+extern char __dtb_imx6dl_nitrogen6x_start[];
+
+ENTRY_FUNCTION(start_imx6dl_nitrogen6x_1g, r0, r1, r2)
+{
+ uint32_t fdt;
+
+ arm_cpu_lowlevel_init();
+
+ fdt = (uint32_t)__dtb_imx6dl_nitrogen6x_start - get_runtime_offset();
+
+ barebox_arm_entry(0x10000000, SZ_1G, fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 90ac28d..e89eb2f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -16,7 +16,9 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
imx6dl-mba6x.dtb \
imx6q-mba6x.dtb \
imx6q-phytec-pbab01.dtb \
- imx6dl-cubox-i-carrier-1.dtb
+ imx6dl-cubox-i-carrier-1.dtb \
+ imx6q-nitrogen6x.dtb \
+ imx6dl-nitrogen6x.dtb
dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb
@@ -45,6 +47,7 @@ pbl-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o
pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
pbl-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += imx6dl-cubox-i-carrier-1.dtb.o
pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
+pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o
.SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S
.SECONDARY: $(patsubst %,$(obj)/%.S,$(dtb-y))
diff --git a/arch/arm/dts/imx6dl-nitrogen6x.dts b/arch/arm/dts/imx6dl-nitrogen6x.dts
new file mode 100644
index 0000000..5f4d33c
--- /dev/null
+++ b/arch/arm/dts/imx6dl-nitrogen6x.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Freescale i.MX6 DualLite Nitrogen6x Board";
+ compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6q-nitrogen6x.dts b/arch/arm/dts/imx6q-nitrogen6x.dts
new file mode 100644
index 0000000..a57866b
--- /dev/null
+++ b/arch/arm/dts/imx6q-nitrogen6x.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Nitrogen6x Board";
+ compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 0000000..07452f9
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,412 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ linux,stdout-path = &uart2;
+
+ environment@0 {
+ compatible = "barebox,environment";
+ device-path = &flash, "partname:barebox-environment";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6x-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b", "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x80000 0x80000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 27 0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-nitrogen6x {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <MX6QDL_AUDMUX_PINGRP2>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_ECSPI1_PINGRP1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_ENET_PINGRP_RGMII_MD(0x1b0b0, 0x100b0)
+ /* Phy reset */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX6QDL_UART1_PINGRP2>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX6QDL_UART2_PINGRP1>;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_USDHC3_PINGRP_D4
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_USDHC4_PINGRP_D4
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3a1089f..7587e15 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -228,6 +228,10 @@ config MACH_SABRELITE
select ARCH_IMX6
select HAVE_DEFAULT_ENVIRONMENT_NEW
select HAVE_PBL_MULTI_IMAGES
+
+config MACH_NITROGEN6X
+ bool "BoundaryDevices Nitrogen6x"
+ select ARCH_IMX6
config MACH_SOLIDRUN_CARRIER1
bool "SolidRun CuBox-i Carrier-1"
diff --git a/images/Makefile.imx b/images/Makefile.imx
index e98204f..ecaa582 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -86,3 +86,13 @@ pblx-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += start_imx6dl_cubox_i_carrier_1
CFG_start_imx6dl_cubox_i_carrier_1.pblx.imximg = $(board)/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
FILE_barebox-cubox-i-carrier-1.img = start_imx6dl_cubox_i_carrier_1.pblx.imximg
image-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += barebox-cubox-i-carrier-1.img
+
+pblx-$(CONFIG_MACH_NITROGEN6X) += start_imx6q_nitrogen6x_1g
+CFG_start_imx6q_nitrogen6x_1g.pblx.imximg = $(board)/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
+FILE_barebox-boundarydevices-imx6q-nitrogen6x-1g.img = start_imx6q_nitrogen6x_1g.pblx.imximg
+image-$(CONFIG_MACH_NITROGEN6X) += barebox-boundarydevices-imx6q-nitrogen6x-1g.img
+
+pblx-$(CONFIG_MACH_NITROGEN6X) += start_imx6dl_nitrogen6x_1g
+CFG_start_imx6dl_nitrogen6x_1g.pblx.imximg = $(board)/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
+FILE_barebox-boundarydevices-imx6dl-nitrogen6x-1g.img = start_imx6dl_nitrogen6x_1g.pblx.imximg
+image-$(CONFIG_MACH_NITROGEN6X) += barebox-boundarydevices-imx6dl-nitrogen6x-1g.img
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 9/9] ARM: imx6: rename Carrier-1 to Hummingboard
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (6 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 8/9] ARM: imx6: add initial support for Nitrogen6X boards Lucas Stach
@ 2014-01-13 0:17 ` Lucas Stach
2014-01-14 16:22 ` [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Lucas Stach @ 2014-01-13 0:17 UTC (permalink / raw)
To: barebox
Solidrun has renamed the Carrier-1 to Hummingboard.
This is also the name that is used in upstream Linux,
change barebox to be in line with that.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/boards/Makefile | 2 +-
arch/arm/boards/solidrun-carrier-1/Makefile | 3 -
arch/arm/boards/solidrun-carrier-1/board.c | 89 ---------------
| 79 --------------
arch/arm/boards/solidrun-carrier-1/lowlevel.c | 18 ----
arch/arm/boards/solidrun-hummingboard/Makefile | 3 +
arch/arm/boards/solidrun-hummingboard/board.c | 89 +++++++++++++++
| 79 ++++++++++++++
arch/arm/boards/solidrun-hummingboard/lowlevel.c | 18 ++++
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6dl-cubox-i-carrier-1.dts | 120 ---------------------
arch/arm/dts/imx6dl-hummingboard.dts | 120 +++++++++++++++++++++
arch/arm/dts/imx6qdl-microsom.dtsi | 21 ++--
arch/arm/mach-imx/Kconfig | 4 +-
images/Makefile.imx | 8 +-
15 files changed, 331 insertions(+), 326 deletions(-)
delete mode 100644 arch/arm/boards/solidrun-carrier-1/Makefile
delete mode 100644 arch/arm/boards/solidrun-carrier-1/board.c
delete mode 100644 arch/arm/boards/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
delete mode 100644 arch/arm/boards/solidrun-carrier-1/lowlevel.c
create mode 100644 arch/arm/boards/solidrun-hummingboard/Makefile
create mode 100644 arch/arm/boards/solidrun-hummingboard/board.c
create mode 100644 arch/arm/boards/solidrun-hummingboard/flash-header-solidrun-hummingboard.imxcfg
create mode 100644 arch/arm/boards/solidrun-hummingboard/lowlevel.c
delete mode 100644 arch/arm/dts/imx6dl-cubox-i-carrier-1.dts
create mode 100644 arch/arm/dts/imx6dl-hummingboard.dts
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 7f56359..a4219d7 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -79,7 +79,7 @@ obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
obj-$(CONFIG_MACH_SCB9328) += scb9328/
obj-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += ebv-socrates/
obj-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += terasic-sockit/
-obj-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += solidrun-carrier-1/
+obj-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += solidrun-hummingboard/
obj-$(CONFIG_MACH_TNY_A9260) += tny-a926x/
obj-$(CONFIG_MACH_TNY_A9263) += tny-a926x/
obj-$(CONFIG_MACH_TNY_A9G20) += tny-a926x/
diff --git a/arch/arm/boards/solidrun-carrier-1/Makefile b/arch/arm/boards/solidrun-carrier-1/Makefile
deleted file mode 100644
index d243c8f..0000000
--- a/arch/arm/boards/solidrun-carrier-1/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y += board.o flash-header-solidrun-carrier-1.dcd.o
-extra-y += flash-header-solidrun-carrier-1.dcd.S flash-header-solidrun-carrier-1.dcd
-lwl-y += lowlevel.o
diff --git a/arch/arm/boards/solidrun-carrier-1/board.c b/arch/arm/boards/solidrun-carrier-1/board.c
deleted file mode 100644
index f520303..0000000
--- a/arch/arm/boards/solidrun-carrier-1/board.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/armlinux.h>
-#include <asm/io.h>
-#include <bootsource.h>
-#include <common.h>
-#include <environment.h>
-#include <envfs.h>
-#include <gpio.h>
-#include <init.h>
-#include <mach/generic.h>
-#include <mach/imx6-regs.h>
-#include <mach/imx6.h>
-#include <mfd/imx6q-iomuxc-gpr.h>
-#include <sizes.h>
-#include <linux/phy.h>
-
-static int ar8035_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Ar803x phy SmartEEE feature cause link status generates glitch,
- * which cause ethernet link down/up issue, so disable SmartEEE
- */
- phy_write(dev, 0xd, 0x3);
- phy_write(dev, 0xe, 0x805d);
- phy_write(dev, 0xd, 0x4003);
-
- val = phy_read(dev, 0xe);
- phy_write(dev, 0xe, val & ~(1 << 8));
-
- /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
- phy_write(dev, 0xd, 0x7);
- phy_write(dev, 0xe, 0x8016);
- phy_write(dev, 0xd, 0x4007);
-
- val = phy_read(dev, 0xe);
- val &= 0xffe3;
- val |= 0x18;
- phy_write(dev, 0xe, val);
-
- /* introduce tx clock delay */
- phy_write(dev, 0x1d, 0x5);
- val = phy_read(dev, 0x1e);
- val |= 0x0100;
- phy_write(dev, 0x1e, val);
-
- return 0;
-}
-
-static int carrier1_device_init(void)
-{
- if (!of_machine_is_compatible("solidrun,cubox-i-carrier-1"))
- return 0;
-
- phy_register_fixup_for_uid(0x004dd072, 0xffffffef, ar8035_phy_fixup);
-
- /* enable USB VBUS */
- gpio_direction_output(IMX_GPIO_NR(3, 22), 1);
- gpio_direction_output(IMX_GPIO_NR(1, 0), 1);
-
- return 0;
-}
-device_initcall(carrier1_device_init);
-
-static int carrier1_lwl_init(void)
-{
- if (!of_machine_is_compatible("solidrun,cubox-i-carrier-1"))
- return 0;
-
- barebox_set_hostname("carrier-1");
-
- imx6_init_lowlevel();
-
- return 0;
-}
-postcore_initcall(carrier1_lwl_init);
diff --git a/arch/arm/boards/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg b/arch/arm/boards/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
deleted file mode 100644
index b1856b4..0000000
--- a/arch/arm/boards/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
+++ /dev/null
@@ -1,79 +0,0 @@
-loadaddr 0x10000000
-soc imx6
-dcdofs 0x400
-wm 32 0x020e0774 0x000c0000
-wm 32 0x020e0754 0x00000000
-wm 32 0x020e04ac 0x00000030
-wm 32 0x020e04b0 0x00000030
-wm 32 0x020e0464 0x00000030
-wm 32 0x020e0490 0x00000030
-wm 32 0x020e074c 0x00000030
-wm 32 0x020e0494 0x00000030
-wm 32 0x020e04a4 0x00003000
-wm 32 0x020e04a8 0x00003000
-wm 32 0x020e04a0 0x00000000
-wm 32 0x020e04b4 0x00003030
-wm 32 0x020e04b8 0x00003030
-wm 32 0x020e076c 0x00000030
-wm 32 0x020e0750 0x00000000
-wm 32 0x020e04bc 0x00000030
-wm 32 0x020e04c0 0x00000030
-wm 32 0x020e04c4 0x00000030
-wm 32 0x020e04c8 0x00000030
-wm 32 0x020e04cc 0x00000000
-wm 32 0x020e04d0 0x00000000
-wm 32 0x020e04d4 0x00000000
-wm 32 0x020e04d8 0x00000000
-wm 32 0x020e0760 0x00000000
-wm 32 0x020e0764 0x00000030
-wm 32 0x020e0770 0x00000030
-wm 32 0x020e0778 0x00000030
-wm 32 0x020e077c 0x00000030
-wm 32 0x020e0780 0x00000000
-wm 32 0x020e0784 0x00000000
-wm 32 0x020e078c 0x00000000
-wm 32 0x020e0748 0x00000000
-wm 32 0x020e0470 0x00000030
-wm 32 0x020e0474 0x00000030
-wm 32 0x020e0478 0x00000030
-wm 32 0x020e047c 0x00000030
-wm 32 0x020e0480 0x00000000
-wm 32 0x020e0484 0x00000000
-wm 32 0x020e0488 0x00000000
-wm 32 0x020e048c 0x00000000
-wm 32 0x021b0800 0xa1390003
-wm 32 0x021b4800 0xa1390003
-wm 32 0x021b080c 0x000F0011
-wm 32 0x021b0810 0x000E000F
-wm 32 0x021b083c 0x42240229
-wm 32 0x021b0840 0x021a0219
-wm 32 0x021b0848 0x4e4f5150
-wm 32 0x021b0850 0x35363136
-wm 32 0x021b081c 0x33333333
-wm 32 0x021b0820 0x33333333
-wm 32 0x021b0824 0x33333333
-wm 32 0x021b0828 0x33333333
-wm 32 0x021b08b8 0x00000800
-wm 32 0x021b48b8 0x00000800
-wm 32 0x021b0004 0x0002002d
-wm 32 0x021b0008 0x00333030
-wm 32 0x021b000c 0x40445323
-wm 32 0x021b0010 0xb68e8c63
-wm 32 0x021b0014 0x01ff00db
-wm 32 0x021b0018 0x00001740
-wm 32 0x021b001c 0x00008000
-wm 32 0x021b002c 0x000026d2
-wm 32 0x021b0030 0x00440e21
-wm 32 0x021b0040 0x00000017
-wm 32 0x021b0400 0x11420000
-wm 32 0x021b0000 0x83190000
-wm 32 0x021b001c 0x04008032
-wm 32 0x021b001c 0x00008033
-wm 32 0x021b001c 0x00428031
-wm 32 0x021b001c 0x07208030
-wm 32 0x021b001c 0x04008040
-wm 32 0x021b0020 0x00005800
-wm 32 0x021b0818 0x00000007
-wm 32 0x021b0004 0x0002556d
-wm 32 0x021b0404 0x00011006
-wm 32 0x021b001c 0x00000000
diff --git a/arch/arm/boards/solidrun-carrier-1/lowlevel.c b/arch/arm/boards/solidrun-carrier-1/lowlevel.c
deleted file mode 100644
index aa94716..0000000
--- a/arch/arm/boards/solidrun-carrier-1/lowlevel.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <common.h>
-#include <sizes.h>
-#include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-
-extern char __dtb_imx6dl_cubox_i_carrier_1_start[];
-
-ENTRY_FUNCTION(start_imx6dl_cubox_i_carrier_1, r0, r1, r2)
-{
- uint32_t fdt;
-
- __barebox_arm_head();
-
- arm_cpu_lowlevel_init();
-
- fdt = (uint32_t)__dtb_imx6dl_cubox_i_carrier_1_start - get_runtime_offset();
- barebox_arm_entry(0x10000000, SZ_512M, fdt);
-}
diff --git a/arch/arm/boards/solidrun-hummingboard/Makefile b/arch/arm/boards/solidrun-hummingboard/Makefile
new file mode 100644
index 0000000..8b4754e
--- /dev/null
+++ b/arch/arm/boards/solidrun-hummingboard/Makefile
@@ -0,0 +1,3 @@
+obj-y += board.o flash-header-solidrun-hummingboard.dcd.o
+extra-y += flash-header-solidrun-hummingboard.dcd.S flash-header-solidrun-hummingboard.dcd
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/solidrun-hummingboard/board.c b/arch/arm/boards/solidrun-hummingboard/board.c
new file mode 100644
index 0000000..afc5c86
--- /dev/null
+++ b/arch/arm/boards/solidrun-hummingboard/board.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2013 Lucas Stach <l.stach@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/armlinux.h>
+#include <asm/io.h>
+#include <bootsource.h>
+#include <common.h>
+#include <environment.h>
+#include <envfs.h>
+#include <gpio.h>
+#include <init.h>
+#include <mach/generic.h>
+#include <mach/imx6-regs.h>
+#include <mach/imx6.h>
+#include <mfd/imx6q-iomuxc-gpr.h>
+#include <sizes.h>
+#include <linux/phy.h>
+
+static int ar8035_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* Ar803x phy SmartEEE feature cause link status generates glitch,
+ * which cause ethernet link down/up issue, so disable SmartEEE
+ */
+ phy_write(dev, 0xd, 0x3);
+ phy_write(dev, 0xe, 0x805d);
+ phy_write(dev, 0xd, 0x4003);
+
+ val = phy_read(dev, 0xe);
+ phy_write(dev, 0xe, val & ~(1 << 8));
+
+ /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
+ phy_write(dev, 0xd, 0x7);
+ phy_write(dev, 0xe, 0x8016);
+ phy_write(dev, 0xd, 0x4007);
+
+ val = phy_read(dev, 0xe);
+ val &= 0xffe3;
+ val |= 0x18;
+ phy_write(dev, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+static int hummingboard_device_init(void)
+{
+ if (!of_machine_is_compatible("solidrun,hummingboard"))
+ return 0;
+
+ phy_register_fixup_for_uid(0x004dd072, 0xffffffef, ar8035_phy_fixup);
+
+ /* enable USB VBUS */
+ gpio_direction_output(IMX_GPIO_NR(3, 22), 1);
+ gpio_direction_output(IMX_GPIO_NR(1, 0), 1);
+
+ return 0;
+}
+device_initcall(hummingboard_device_init);
+
+static int hummingboard_lwl_init(void)
+{
+ if (!of_machine_is_compatible("solidrun,hummingboard"))
+ return 0;
+
+ barebox_set_hostname("hummingboard");
+
+ imx6_init_lowlevel();
+
+ return 0;
+}
+postcore_initcall(hummingboard_lwl_init);
diff --git a/arch/arm/boards/solidrun-hummingboard/flash-header-solidrun-hummingboard.imxcfg b/arch/arm/boards/solidrun-hummingboard/flash-header-solidrun-hummingboard.imxcfg
new file mode 100644
index 0000000..b1856b4
--- /dev/null
+++ b/arch/arm/boards/solidrun-hummingboard/flash-header-solidrun-hummingboard.imxcfg
@@ -0,0 +1,79 @@
+loadaddr 0x10000000
+soc imx6
+dcdofs 0x400
+wm 32 0x020e0774 0x000c0000
+wm 32 0x020e0754 0x00000000
+wm 32 0x020e04ac 0x00000030
+wm 32 0x020e04b0 0x00000030
+wm 32 0x020e0464 0x00000030
+wm 32 0x020e0490 0x00000030
+wm 32 0x020e074c 0x00000030
+wm 32 0x020e0494 0x00000030
+wm 32 0x020e04a4 0x00003000
+wm 32 0x020e04a8 0x00003000
+wm 32 0x020e04a0 0x00000000
+wm 32 0x020e04b4 0x00003030
+wm 32 0x020e04b8 0x00003030
+wm 32 0x020e076c 0x00000030
+wm 32 0x020e0750 0x00000000
+wm 32 0x020e04bc 0x00000030
+wm 32 0x020e04c0 0x00000030
+wm 32 0x020e04c4 0x00000030
+wm 32 0x020e04c8 0x00000030
+wm 32 0x020e04cc 0x00000000
+wm 32 0x020e04d0 0x00000000
+wm 32 0x020e04d4 0x00000000
+wm 32 0x020e04d8 0x00000000
+wm 32 0x020e0760 0x00000000
+wm 32 0x020e0764 0x00000030
+wm 32 0x020e0770 0x00000030
+wm 32 0x020e0778 0x00000030
+wm 32 0x020e077c 0x00000030
+wm 32 0x020e0780 0x00000000
+wm 32 0x020e0784 0x00000000
+wm 32 0x020e078c 0x00000000
+wm 32 0x020e0748 0x00000000
+wm 32 0x020e0470 0x00000030
+wm 32 0x020e0474 0x00000030
+wm 32 0x020e0478 0x00000030
+wm 32 0x020e047c 0x00000030
+wm 32 0x020e0480 0x00000000
+wm 32 0x020e0484 0x00000000
+wm 32 0x020e0488 0x00000000
+wm 32 0x020e048c 0x00000000
+wm 32 0x021b0800 0xa1390003
+wm 32 0x021b4800 0xa1390003
+wm 32 0x021b080c 0x000F0011
+wm 32 0x021b0810 0x000E000F
+wm 32 0x021b083c 0x42240229
+wm 32 0x021b0840 0x021a0219
+wm 32 0x021b0848 0x4e4f5150
+wm 32 0x021b0850 0x35363136
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b08b8 0x00000800
+wm 32 0x021b48b8 0x00000800
+wm 32 0x021b0004 0x0002002d
+wm 32 0x021b0008 0x00333030
+wm 32 0x021b000c 0x40445323
+wm 32 0x021b0010 0xb68e8c63
+wm 32 0x021b0014 0x01ff00db
+wm 32 0x021b0018 0x00001740
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b002c 0x000026d2
+wm 32 0x021b0030 0x00440e21
+wm 32 0x021b0040 0x00000017
+wm 32 0x021b0400 0x11420000
+wm 32 0x021b0000 0x83190000
+wm 32 0x021b001c 0x04008032
+wm 32 0x021b001c 0x00008033
+wm 32 0x021b001c 0x00428031
+wm 32 0x021b001c 0x07208030
+wm 32 0x021b001c 0x04008040
+wm 32 0x021b0020 0x00005800
+wm 32 0x021b0818 0x00000007
+wm 32 0x021b0004 0x0002556d
+wm 32 0x021b0404 0x00011006
+wm 32 0x021b001c 0x00000000
diff --git a/arch/arm/boards/solidrun-hummingboard/lowlevel.c b/arch/arm/boards/solidrun-hummingboard/lowlevel.c
new file mode 100644
index 0000000..c101f06
--- /dev/null
+++ b/arch/arm/boards/solidrun-hummingboard/lowlevel.c
@@ -0,0 +1,18 @@
+#include <common.h>
+#include <sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_imx6dl_hummingboard_start[];
+
+ENTRY_FUNCTION(start_imx6dl_hummingboard, r0, r1, r2)
+{
+ uint32_t fdt;
+
+ __barebox_arm_head();
+
+ arm_cpu_lowlevel_init();
+
+ fdt = (uint32_t)__dtb_imx6dl_hummingboard_start - get_runtime_offset();
+ barebox_arm_entry(0x10000000, SZ_512M, fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e89eb2f..add4dc0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -16,7 +16,7 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
imx6dl-mba6x.dtb \
imx6q-mba6x.dtb \
imx6q-phytec-pbab01.dtb \
- imx6dl-cubox-i-carrier-1.dtb \
+ imx6dl-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6dl-nitrogen6x.dtb
dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox.dtb
@@ -45,7 +45,7 @@ pbl-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o
pbl-$(CONFIG_MACH_TQMA6X) += imx6dl-mba6x.dtb.o imx6q-mba6x.dtb.o
pbl-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o
pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
-pbl-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += imx6dl-cubox-i-carrier-1.dtb.o
+pbl-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += imx6dl-hummingboard.dtb.o
pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o
diff --git a/arch/arm/dts/imx6dl-cubox-i-carrier-1.dts b/arch/arm/dts/imx6dl-cubox-i-carrier-1.dts
deleted file mode 100644
index 1f13f03..0000000
--- a/arch/arm/dts/imx6dl-cubox-i-carrier-1.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2013 Russell King
- *
- * The code contained herein is licensed under the GNU General Public
- * License version 2.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
-
-/ {
- model = "SolidRun Cubox-i DL/Solo Carrier-1 Board";
- compatible = "solidrun,cubox-i-carrier-1", "fsl,imx6dl";
-
- chosen {
- linux,stdout-path = &uart1;
-
- environment@0 {
- compatible = "barebox,environment";
- device-path = &usdhc2, "partname:barebox-environment";
- };
- };
-
- memory {
- reg = <0x10000000 0x20000000>;
- };
-
- ir_recv: ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio1 2 1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_carrier1_gpio1_2>;
- };
-
- codec: spdif-transmitter {
- compatible = "linux,spdif-dit";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_carrier1_spdif>;
- };
-
- sound-spdif {
- compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
- /* IMX6 doesn't implement this yet */
- spdif-controller = <&spdif>;
- spdif-out;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
-
- /*
- * Not fitted on Carrier-1 board... yet
- status = "okay";
-
- rtc: pcf8523@68 {
- compatible = "nxp,pcf8523";
- reg = <0x68>;
- };
- */
-};
-
-&iomuxc {
- carrier1 {
- pinctrl_carrier1_gpio1_2: carrier1-gpio1_2 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
- >;
- };
-
- pinctrl_carrier1_spdif: carrier1-spdif {
- fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
- };
-
- pinctrl_carrier1_usdhc2: carrier1-usdhc2 {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
- MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1f071
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <MX6QDL_I2C1_PINGRP1>;
- };
- };
-};
-
-&spdif {
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_carrier1_usdhc2>;
- vmmc-supply = <®_3p3v>;
- fsl,cd-controller;
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "barebox";
- reg = <0x0 0x80000>;
- };
-
- partition@1 {
- label = "barebox-environment";
- reg = <0x80000 0x80000>;
- };
-};
diff --git a/arch/arm/dts/imx6dl-hummingboard.dts b/arch/arm/dts/imx6dl-hummingboard.dts
new file mode 100644
index 0000000..e964682
--- /dev/null
+++ b/arch/arm/dts/imx6dl-hummingboard.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2013 Russell King
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License version 2.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-microsom.dtsi"
+#include "imx6qdl-microsom-ar8035.dtsi"
+
+/ {
+ model = "SolidRun HummingBoard DL/Solo";
+ compatible = "solidrun,hummingboard", "fsl,imx6dl";
+
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment@0 {
+ compatible = "barebox,environment";
+ device-path = &usdhc2, "partname:barebox-environment";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ ir_recv: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 2 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>;
+ };
+
+ codec: spdif-transmitter {
+ compatible = "linux,spdif-dit";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ /* IMX6 doesn't implement this yet */
+ spdif-controller = <&spdif>;
+ spdif-out;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+
+ /*
+ * Not fitted on Carrier-1 board... yet
+ status = "okay";
+
+ rtc: pcf8523@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+ */
+};
+
+&iomuxc {
+ hummingboard {
+ pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ >;
+ };
+
+ pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
+ fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+ };
+
+ pinctrl_hummingboard_spdif: hummingboard-spdif {
+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+ };
+
+ pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+ MX6QDL_PAD_GPIO_4__SD2_CD_B 0x1f071
+ >;
+ };
+ };
+};
+
+&spdif {
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_usdhc2>;
+ vmmc-supply = <®_3p3v>;
+ fsl,cd-controller;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x80000 0x80000>;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-microsom.dtsi b/arch/arm/dts/imx6qdl-microsom.dtsi
index 85e43bf..a8cfbb4 100644
--- a/arch/arm/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/dts/imx6qdl-microsom.dtsi
@@ -7,17 +7,21 @@
/ {
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_usb_h1_vbus: usb_h1_vbus {
+ reg_usb_h1_vbus: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -25,8 +29,9 @@
enable-active-high;
};
- reg_usb_otg_vbus: usb_otg_vbus {
+ reg_usb_otg_vbus: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -51,6 +56,10 @@
>;
};
+ pinctrl_microsom_uart1: microsom-uart1 {
+ fsl,pins = <MX6QDL_UART1_PINGRP1>;
+ };
+
pinctrl_microsom_usbotg: microsom-usbotg {
/*
* Similar to pinctrl_usbotg_2, but we want it
@@ -58,16 +67,12 @@
*/
fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
};
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <MX6QDL_UART1_PINGRP1>;
- };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
+ pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7587e15..de0b9ac 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -233,8 +233,8 @@ config MACH_NITROGEN6X
bool "BoundaryDevices Nitrogen6x"
select ARCH_IMX6
-config MACH_SOLIDRUN_CARRIER1
- bool "SolidRun CuBox-i Carrier-1"
+config MACH_SOLIDRUN_HUMMINGBOARD
+ bool "SolidRun Hummingboard"
select ARCH_IMX6
endif
diff --git a/images/Makefile.imx b/images/Makefile.imx
index ecaa582..a0522f0 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -82,10 +82,10 @@ CFG_start_imx6dl_sabrelite.pblx.imximg = $(board)/freescale-mx6-sabrelite/flash-
FILE_barebox-freescale-imx6dl-sabrelite.img = start_imx6dl_sabrelite.pblx.imximg
image-$(CONFIG_MACH_SABRELITE) += barebox-freescale-imx6dl-sabrelite.img
-pblx-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += start_imx6dl_cubox_i_carrier_1
-CFG_start_imx6dl_cubox_i_carrier_1.pblx.imximg = $(board)/solidrun-carrier-1/flash-header-solidrun-carrier-1.imxcfg
-FILE_barebox-cubox-i-carrier-1.img = start_imx6dl_cubox_i_carrier_1.pblx.imximg
-image-$(CONFIG_MACH_SOLIDRUN_CARRIER1) += barebox-cubox-i-carrier-1.img
+pblx-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += start_imx6dl_hummingboard
+CFG_start_imx6dl_hummingboard.pblx.imximg = $(board)/solidrun-hummingboard/flash-header-solidrun-hummingboard.imxcfg
+FILE_barebox-solidrun-imx6dl-hummingboard.img = start_imx6dl_hummingboard.pblx.imximg
+image-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += barebox-solidrun-imx6dl-hummingboard.img
pblx-$(CONFIG_MACH_NITROGEN6X) += start_imx6q_nitrogen6x_1g
CFG_start_imx6q_nitrogen6x_1g.pblx.imximg = $(board)/boundarydevices-nitrogen6x/flash-header-nitrogen6x-1g.imxcfg
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function
2014-01-13 0:17 [PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
` (7 preceding siblings ...)
2014-01-13 0:17 ` [PATCH 9/9] ARM: imx6: rename Carrier-1 to Hummingboard Lucas Stach
@ 2014-01-14 16:22 ` Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2014-01-14 16:22 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Mon, Jan 13, 2014 at 01:17:22AM +0100, Lucas Stach wrote:
> Otherwise we end up doing the VMX53 board init for
> unrelated boards when using a multiimage build.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
Applied, thanks
Sascha
> ---
> arch/arm/boards/freescale-mx53-vmx53/board.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boards/freescale-mx53-vmx53/board.c b/arch/arm/boards/freescale-mx53-vmx53/board.c
> index b38db71..d0cc495 100644
> --- a/arch/arm/boards/freescale-mx53-vmx53/board.c
> +++ b/arch/arm/boards/freescale-mx53-vmx53/board.c
> @@ -30,6 +30,9 @@ extern char flash_header_imx53_vmx53_end[];
>
> static int vmx53_late_init(void)
> {
> + if (!of_machine_is_compatible("voipac,imx53-dmm-668"))
> + return 0;
> +
> armlinux_set_architecture(MACH_TYPE_VMX53);
>
> barebox_set_model("Voipac VMX53");
> --
> 1.8.4.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread