From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/22] ARM: dts: Add i.MX27 devicetree files
Date: Fri, 17 Jan 2014 16:03:22 +0100 [thread overview]
Message-ID: <1389971012-22977-13-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1389971012-22977-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx27-pinfunc.h | 526 +++++++++++++++++++++++++
arch/arm/dts/imx27-pingrp.h | 151 +++++++
arch/arm/dts/imx27.dtsi | 505 ++++++++++++++++++++++++
include/dt-bindings/interrupt-controller/irq.h | 19 +
4 files changed, 1201 insertions(+)
create mode 100644 arch/arm/dts/imx27-pinfunc.h
create mode 100644 arch/arm/dts/imx27-pingrp.h
create mode 100644 arch/arm/dts/imx27.dtsi
create mode 100644 include/dt-bindings/interrupt-controller/irq.h
diff --git a/arch/arm/dts/imx27-pinfunc.h b/arch/arm/dts/imx27-pinfunc.h
new file mode 100644
index 0000000..f5387b4
--- /dev/null
+++ b/arch/arm/dts/imx27-pinfunc.h
@@ -0,0 +1,526 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function: 0 - Primary function
+ * 1 - Alternate function
+ * 2 - GPIO
+ * direction: 0 - Input
+ * 1 - Output
+ * gpio_oconf: 0 - A_IN
+ * 1 - B_IN
+ * 2 - C_IN
+ * 3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ * 1 - Interrupt Status Register
+ * 2 - 0
+ * 3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK 0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0 0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR 0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1 0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2 0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT 0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3 0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP 0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4 0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK 0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5 0x05 0x032
+#define MX27_PAD_LD0__LD0 0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6 0x06 0x032
+#define MX27_PAD_LD1__LD1 0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7 0x07 0x032
+#define MX27_PAD_LD2__LD2 0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8 0x08 0x032
+#define MX27_PAD_LD3__LD3 0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9 0x09 0x032
+#define MX27_PAD_LD4__LD4 0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10 0x0a 0x032
+#define MX27_PAD_LD5__LD5 0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11 0x0b 0x032
+#define MX27_PAD_LD6__LD6 0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12 0x0c 0x032
+#define MX27_PAD_LD7__LD7 0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13 0x0d 0x032
+#define MX27_PAD_LD8__LD8 0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14 0x0e 0x032
+#define MX27_PAD_LD9__LD9 0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15 0x0f 0x032
+#define MX27_PAD_LD10__LD10 0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16 0x10 0x032
+#define MX27_PAD_LD11__LD11 0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17 0x11 0x032
+#define MX27_PAD_LD12__LD12 0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18 0x12 0x032
+#define MX27_PAD_LD13__LD13 0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19 0x13 0x032
+#define MX27_PAD_LD14__LD14 0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20 0x14 0x032
+#define MX27_PAD_LD15__LD15 0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21 0x15 0x032
+#define MX27_PAD_LD16__LD16 0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22 0x16 0x032
+#define MX27_PAD_LD17__LD17 0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23 0x17 0x032
+#define MX27_PAD_REV__REV 0x18 0x004
+#define MX27_PAD_REV__GPIO1_24 0x18 0x032
+#define MX27_PAD_CLS__CLS 0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25 0x19 0x032
+#define MX27_PAD_PS__PS 0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26 0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR 0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27 0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC 0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28 0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC 0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29 0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST 0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032
+#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004
+#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032
+#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004
+#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032
+#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004
+#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032
+#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004
+#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032
+#define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1 0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1 0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5 0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2 0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2 0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6 0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3 0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3 0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7 0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD 0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS 0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8 0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK 0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK 0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9 0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0 0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD 0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10 0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1 0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD 0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11 0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2 0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS 0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12 0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3 0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS 0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13 0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4 0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14 0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK 0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15 0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK 0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16 0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5 0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17 0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6 0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD 0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18 0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7 0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD 0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19 0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC 0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS 0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20 0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC 0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS 0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21 0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP 0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22 0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR 0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23 0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B 0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24 0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV 0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25 0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS 0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS 0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26 0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B 0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27 0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM 0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD 0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28 0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP 0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS 0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29 0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM 0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30 0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032
+#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004
+#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032
+#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004
+#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032
+#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004
+#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032
+#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004
+#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032
+#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004
+#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6 0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7 0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8 0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9 0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10 0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11 0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12 0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13 0x4d 0x032
+#define MX27_PAD_TOUT__TOUT 0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14 0x4e 0x032
+#define MX27_PAD_TIN__TIN 0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15 0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS 0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16 0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17 0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18 0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK 0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19 0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS 0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20 0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21 0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22 0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK 0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23 0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS 0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT 0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24 0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT 0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN 0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25 0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT 0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT 0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26 0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK 0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN 0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27 0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS 0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0 0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28 0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT 0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS 0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29 0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT 0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS 0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30 0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK 0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK 0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31 0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD 0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0 0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0 0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK 0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15 0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1 0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1 0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0 0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0 0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2 0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2 0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1 0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1 0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3 0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3 0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2 0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2 0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER 0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4 0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3 0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3 0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1 0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5 0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4 0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14 0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2 0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6 0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5 0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13 0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3 0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7 0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6 0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO 0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8 0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7 0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12 0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC 0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9 0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8 0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11 0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS 0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10 0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9 0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10 0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11 0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10 0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9 0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0 0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12 0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11 0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8 0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV 0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13 0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12 0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7 0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14 0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13 0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6 0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL 0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15 0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14 0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5 0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER 0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16 0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA 0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17 0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK 0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18 0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2 0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19 0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1 0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20 0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0 0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21 0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22 0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23 0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24 0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY 0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25 0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2 0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26 0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1 0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27 0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0 0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28 0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29 0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30 0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31 0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A 0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0 0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP 0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A 0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1 0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A 0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2 0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS 0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7 0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3 0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS 0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7 0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4 0x84 0x032
+#define MX27_PAD_PWMO__PWMO 0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5 0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD 0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6 0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6 0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD 0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6 0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7 0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD 0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8 0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD 0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9 0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS 0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10 0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS 0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11 0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD 0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12 0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD 0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13 0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS 0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14 0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS 0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15 0x8f 0x032
+#define MX27_PAD_RTCK__RTCK 0x90 0x004
+#define MX27_PAD_RTCK__OWIRE 0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16 0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B 0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17 0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0 0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO 0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18 0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1 0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19 0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2 0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20 0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3 0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS 0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21 0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD 0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI 0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22 0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK 0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK 0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23 0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032
+#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004
+#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032
+#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004
+#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032
+#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004
+#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032
+#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004
+#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032
+#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004
+#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032
+#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004
+#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032
+#define MX27_PAD_NFRB__NFRB 0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE 0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0 0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1 0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B 0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1 0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2 0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B 0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2 0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3 0xa3 0x032
+#define MX27_PAD_NFALE__NFALE 0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0 0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4 0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B 0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1 0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5 0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B 0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2 0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6 0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE 0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN 0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7 0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B 0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY 0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8 0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16 0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ 0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9 0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST 0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B 0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10 0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2 0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK 0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11 0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1 0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ 0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12 0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2 0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0 0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13 0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1 0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1 0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14 0xae 0x032
+#define MX27_PAD_CLKO__CLKO 0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15 0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON 0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2 0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16 0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY 0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0 0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17 0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B 0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1 0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18 0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B 0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW 0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19 0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B 0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR 0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20 0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B 0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC 0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21 0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B 0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK 0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22 0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15 0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032
+#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004
+#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032
+#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004
+#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032
+#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004
+#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032
+#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004
+#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032
+#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004
+#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032
+#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004
+#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032
+#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004
+#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032
+#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004
+#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/dts/imx27-pingrp.h b/arch/arm/dts/imx27-pingrp.h
new file mode 100644
index 0000000..57ca02f
--- /dev/null
+++ b/arch/arm/dts/imx27-pingrp.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __DTS_IMX27_PINGRP_H
+#define __DTS_IMX27_PINGRP_H
+
+#include "imx27-pinfunc.h"
+
+#define MX27_CSPI1_PINGRP1 \
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 \
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 \
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+
+#define MX27_CSPI2_PINGRP1 \
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 \
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 \
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+
+#define MX27_CSPI3_PINGRP1 \
+ MX27_PAD_SD1_CLK__CSPI3_SCLK 0x0 \
+ MX27_PAD_SD1_D0__CSPI3_MISO 0x0 \
+ MX27_PAD_SD1_CMD__CSPI3_MOSI 0x0
+
+#define MX27_FB_PINGRP1 \
+ MX27_PAD_CLS__CLS 0x0 \
+ MX27_PAD_CONTRAST__CONTRAST 0x0 \
+ MX27_PAD_LD0__LD0 0x0 \
+ MX27_PAD_LD1__LD1 0x0 \
+ MX27_PAD_LD2__LD2 0x0 \
+ MX27_PAD_LD3__LD3 0x0 \
+ MX27_PAD_LD4__LD4 0x0 \
+ MX27_PAD_LD5__LD5 0x0 \
+ MX27_PAD_LD6__LD6 0x0 \
+ MX27_PAD_LD7__LD7 0x0 \
+ MX27_PAD_LD8__LD8 0x0 \
+ MX27_PAD_LD9__LD9 0x0 \
+ MX27_PAD_LD10__LD10 0x0 \
+ MX27_PAD_LD11__LD11 0x0 \
+ MX27_PAD_LD12__LD12 0x0 \
+ MX27_PAD_LD13__LD13 0x0 \
+ MX27_PAD_LD14__LD14 0x0 \
+ MX27_PAD_LD15__LD15 0x0 \
+ MX27_PAD_LD16__LD16 0x0 \
+ MX27_PAD_LD17__LD17 0x0 \
+ MX27_PAD_LSCLK__LSCLK 0x0 \
+ MX27_PAD_OE_ACD__OE_ACD 0x0 \
+ MX27_PAD_PS__PS 0x0 \
+ MX27_PAD_REV__REV 0x0 \
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0 \
+ MX27_PAD_HSYNC__HSYNC 0x0 \
+ MX27_PAD_VSYNC__VSYNC 0x0
+
+#define MX27_FEC1_PINGRP1 \
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0 \
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0 \
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 \
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 \
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 \
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 \
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 \
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 \
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 \
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0 \
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0 \
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 \
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 \
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 \
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 \
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0 \
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 \
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+
+#define MX27_I2C1_PINGRP1 \
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0 \
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+
+#define MX27_I2C2_PINGRP1 \
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 \
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+
+#define MX27_NFC_PINGRP1 \
+ MX27_PAD_NFRB__NFRB 0x0 \
+ MX27_PAD_NFCLE__NFCLE 0x0 \
+ MX27_PAD_NFWP_B__NFWP_B 0x0 \
+ MX27_PAD_NFCE_B__NFCE_B 0x0 \
+ MX27_PAD_NFALE__NFALE 0x0 \
+ MX27_PAD_NFRE_B__NFRE_B 0x0 \
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+
+#define MX27_OWIRE1_PINGRP1 \
+ MX27_PAD_RTCK__OWIRE 0x0
+
+#define MX27_PWM_PINGRP1 \
+ MX27_PAD_PWMO__PWMO 0x0
+
+#define MX27_SDHC1_PINGRP1 \
+ MX27_PAD_SD1_CLK__SD1_CLK 0x0 \
+ MX27_PAD_SD1_CMD__SD1_CMD 0x0 \
+ MX27_PAD_SD1_D0__SD1_D0 0x0 \
+ MX27_PAD_SD1_D1__SD1_D1 0x0 \
+ MX27_PAD_SD1_D2__SD1_D2 0x0 \
+ MX27_PAD_SD1_D3__SD1_D3 0x0
+
+#define MX27_SDHC2_PINGRP1 \
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0 \
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0 \
+ MX27_PAD_SD2_D0__SD2_D0 0x0 \
+ MX27_PAD_SD2_D1__SD2_D1 0x0 \
+ MX27_PAD_SD2_D2__SD2_D2 0x0 \
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+
+#define MX27_SDHC3_PINGRP1 \
+ MX27_PAD_SD3_CLK__SD3_CLK 0x0 \
+ MX27_PAD_SD3_CMD__SD3_CMD 0x0 \
+ MX27_PAD_SD3_D0__SD3_D0 0x0 \
+ MX27_PAD_SD3_D1__SD3_D1 0x0 \
+ MX27_PAD_SD3_D2__SD3_D2 0x0 \
+ MX27_PAD_SD3_D3__SD3_D3 0x0
+
+#define MX27_UART1_PINGRP1 \
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0 \
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+
+#define MX27_UART1_RTSCTS_PINGRP1 \
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0 \
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+
+#define MX27_UART2_PINGRP1 \
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0 \
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+
+#define MX27_UART2_RTSCTS_PINGRP1 \
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0 \
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+
+#define MX27_UART3_PINGRP1 \
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0 \
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+
+#define MX27_UART3_RTSCTS_PINGRP1 \
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0 \
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+
+#endif /* __DTS_IMX27_PINGRP_H */
diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
new file mode 100644
index 0000000..7e98966
--- /dev/null
+++ b/arch/arm/dts/imx27.dtsi
@@ -0,0 +1,505 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx27-pingrp.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ spi0 = &cspi1;
+ spi1 = &cspi2;
+ spi2 = &cspi3;
+ };
+
+ aitc: aitc-interrupt-controller@e0000000 {
+ compatible = "fsl,imx27-aitc", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10040000 0x1000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc26m {
+ compatible = "fsl,imx-osc26m", "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+ };
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ operating-points = <
+ /* kHz uV */
+ 266000 1300000
+ 399000 1450000
+ >;
+ clock-latency = <62500>;
+ clocks = <&clks 18>;
+ voltage-tolerance = <5>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&aitc>;
+ ranges;
+
+ aipi@10000000 { /* AIPI1 */
+ compatible = "fsl,aipi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10000000 0x20000>;
+ ranges;
+
+ dma: dma@10001000 {
+ compatible = "fsl,imx27-dma";
+ reg = <0x10001000 0x1000>;
+ interrupts = <32>;
+ clocks = <&clks 50>, <&clks 70>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <1>;
+ #dma-channels = <16>;
+ };
+
+ wdog: wdog@10002000 {
+ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
+ reg = <0x10002000 0x1000>;
+ interrupts = <27>;
+ clocks = <&clks 74>;
+ };
+
+ gpt1: timer@10003000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x10003000 0x1000>;
+ interrupts = <26>;
+ clocks = <&clks 46>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt2: timer@10004000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x10004000 0x1000>;
+ interrupts = <25>;
+ clocks = <&clks 45>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt3: timer@10005000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x10005000 0x1000>;
+ interrupts = <24>;
+ clocks = <&clks 44>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ pwm: pwm@10006000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx27-pwm";
+ reg = <0x10006000 0x1000>;
+ interrupts = <23>;
+ clocks = <&clks 34>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ kpp: kpp@10008000 {
+ compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+ reg = <0x10008000 0x1000>;
+ interrupts = <21>;
+ clocks = <&clks 37>;
+ status = "disabled";
+ };
+
+ owire: owire@10009000 {
+ compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+ reg = <0x10009000 0x1000>;
+ clocks = <&clks 35>;
+ status = "disabled";
+ };
+
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks 81>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@1000b000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000b000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clks 80>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@1000c000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000c000 0x1000>;
+ interrupts = <18>;
+ clocks = <&clks 79>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart4: serial@1000d000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000d000 0x1000>;
+ interrupts = <17>;
+ clocks = <&clks 78>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ cspi1: cspi@1000e000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x1000e000 0x1000>;
+ interrupts = <16>;
+ clocks = <&clks 53>, <&clks 60>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ cspi2: cspi@1000f000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x1000f000 0x1000>;
+ interrupts = <15>;
+ clocks = <&clks 52>, <&clks 60>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi1: ssi@10010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10010000 0x1000>;
+ interrupts = <14>;
+ clocks = <&clks 26>;
+ dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@10011000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10011000 0x1000>;
+ interrupts = <13>;
+ clocks = <&clks 25>;
+ dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+ reg = <0x10012000 0x1000>;
+ interrupts = <12>;
+ clocks = <&clks 40>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@10013000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x10013000 0x1000>;
+ interrupts = <11>;
+ clocks = <&clks 30>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 7>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ sdhci2: sdhci@10014000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x10014000 0x1000>;
+ interrupts = <10>;
+ clocks = <&clks 29>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 6>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@10015000 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015000 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@10015100 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015100 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@10015200 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015200 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@10015300 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015300 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@10015400 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015400 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@10015500 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015500 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ audmux: audmux@10016000 {
+ compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+ reg = <0x10016000 0x1000>;
+ clocks = <&clks 0>;
+ clock-names = "audmux";
+ status = "disabled";
+ };
+
+ cspi3: cspi@10017000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x10017000 0x1000>;
+ interrupts = <6>;
+ clocks = <&clks 51>, <&clks 60>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt4: timer@10019000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x10019000 0x1000>;
+ interrupts = <4>;
+ clocks = <&clks 43>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt5: timer@1001a000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x1001a000 0x1000>;
+ interrupts = <3>;
+ clocks = <&clks 42>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+
+ uart5: serial@1001b000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1001b000 0x1000>;
+ interrupts = <49>;
+ clocks = <&clks 77>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial@1001c000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1001c000 0x1000>;
+ interrupts = <48>;
+ clocks = <&clks 78>, <&clks 61>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@1001d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+ reg = <0x1001d000 0x1000>;
+ interrupts = <1>;
+ clocks = <&clks 39>;
+ status = "disabled";
+ };
+
+ sdhci3: sdhci@1001e000 {
+ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+ reg = <0x1001e000 0x1000>;
+ interrupts = <9>;
+ clocks = <&clks 28>, <&clks 60>;
+ clock-names = "ipg", "per";
+ dmas = <&dma 36>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ gpt6: timer@1001f000 {
+ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+ reg = <0x1001f000 0x1000>;
+ interrupts = <2>;
+ clocks = <&clks 41>, <&clks 61>;
+ clock-names = "ipg", "per";
+ };
+ };
+
+ aipi@10020000 { /* AIPI2 */
+ compatible = "fsl,aipi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10020000 0x20000>;
+ ranges;
+
+ fb: fb@10021000 {
+ compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+ interrupts = <61>;
+ reg = <0x10021000 0x1000>;
+ clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ coda: coda@10023000 {
+ compatible = "fsl,imx27-vpu";
+ reg = <0x10023000 0x0200>;
+ interrupts = <53>;
+ clocks = <&clks 57>, <&clks 66>;
+ clock-names = "per", "ahb";
+ iram = <&iram>;
+ };
+
+ sahara2: sahara@10025000 {
+ compatible = "fsl,imx27-sahara";
+ reg = <0x10025000 0x1000>;
+ interrupts = <59>;
+ clocks = <&clks 32>, <&clks 64>;
+ clock-names = "ipg", "ahb";
+ };
+
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ iim: iim@10028000 {
+ compatible = "fsl,imx27-iim";
+ reg = <0x10028000 0x1000>;
+ interrupts = <62>;
+ clocks = <&clks 38>;
+ };
+
+ fec: ethernet@1002b000 {
+ compatible = "fsl,imx27-fec";
+ reg = <0x1002b000 0x4000>;
+ interrupts = <50>;
+ clocks = <&clks 48>, <&clks 67>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+ };
+
+ nfc: nand@d8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx27-nand";
+ reg = <0xd8000000 0x1000>;
+ interrupts = <29>;
+ clocks = <&clks 54>;
+ status = "disabled";
+ };
+
+ weim: weim@d8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx27-weim";
+ reg = <0xd8002000 0x1000>;
+ clocks = <&clks 0>;
+ ranges = <
+ 0 0 0xc0000000 0x08000000
+ 1 0 0xc8000000 0x08000000
+ 2 0 0xd0000000 0x02000000
+ 3 0 0xd2000000 0x02000000
+ 4 0 0xd4000000 0x02000000
+ 5 0 0xd6000000 0x02000000
+ >;
+ status = "disabled";
+ };
+
+ iram: iram@ffff4c00 {
+ compatible = "mmio-sram";
+ reg = <0xffff4c00 0xb400>;
+ };
+ };
+};
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 0000000..33a1003
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,19 @@
+/*
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
--
1.8.5.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-01-17 15:04 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-17 15:03 phyCARD-i.MX27 patches Sascha Hauer
2014-01-17 15:03 ` [PATCH 01/22] ARM: Karo TX25: register external NAND boot update handler Sascha Hauer
2014-01-17 15:03 ` [PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition Sascha Hauer
2014-01-18 19:16 ` Alexander Aring
2014-01-19 14:19 ` Alexander Aring
2014-01-20 9:28 ` Sascha Hauer
2014-01-17 15:03 ` [PATCH 03/22] ARM: phyCARD-i.MX27: register barebox update handler Sascha Hauer
2014-01-17 15:03 ` [PATCH 04/22] ARM: phyCARD-i.MX27: switch to new environment Sascha Hauer
2014-01-17 15:03 ` [PATCH 05/22] ARM: phyCARD-i.MX27: convert lowlevel init to c code Sascha Hauer
2014-01-17 15:03 ` [PATCH 06/22] ARM: i.MX27: Add missing MPLL clock sources Sascha Hauer
2014-01-17 15:03 ` [PATCH 07/22] ARM: phyCARD-i.MX27: Update defconfig Sascha Hauer
2014-01-17 15:03 ` [PATCH 08/22] ARM: Fix image size calculation for CONFIG_PBL_RELOCATABLE Sascha Hauer
2014-01-17 15:03 ` [PATCH 09/22] ARM: i.MX: external NAND boot: factor out a 2k pagesize detection function Sascha Hauer
2014-01-17 15:03 ` [PATCH 10/22] ARM: i.MX: external NAND boot: create function macro for different SoCs Sascha Hauer
2014-01-17 15:03 ` [PATCH 11/22] ARM: i.MX: external NAND boot: make it work with relocatable PBL Sascha Hauer
2014-01-17 15:03 ` Sascha Hauer [this message]
2014-01-17 16:35 ` [PATCH 12/22] ARM: dts: Add i.MX27 devicetree files Alexander Shiyan
2014-01-17 15:03 ` [PATCH 13/22] ARM: dts: Add Phytec phyCARD-i.MX27 " Sascha Hauer
2014-01-17 16:26 ` Alexander Shiyan
2014-01-17 17:56 ` Sascha Hauer
2014-01-17 15:03 ` [PATCH 14/22] ARM: i.MX: external NAND boot: pass boarddata Sascha Hauer
2014-01-17 15:03 ` [PATCH 15/22] pinctrl: Add pinctrl driver for i.MX1/21/27 Sascha Hauer
2014-01-17 15:13 ` Alexander Shiyan
2014-01-17 17:55 ` Sascha Hauer
2014-01-17 15:03 ` [PATCH 16/22] ARM: i.MX clocksource: return successful for multiple instances Sascha Hauer
2014-01-17 15:03 ` [PATCH 17/22] ARM: phycard-i.MX27: Add NAND support to dts Sascha Hauer
2014-01-17 15:03 ` [PATCH 18/22] ARM: phycard-i.MX27: Add stdout-path property Sascha Hauer
2014-01-17 15:03 ` [PATCH 19/22] ARM: dts: phycard-i.MX27: Add environment and NAND partitioning Sascha Hauer
2014-01-17 16:20 ` Alexander Shiyan
2014-01-20 9:50 ` Sascha Hauer
2014-01-17 15:03 ` [PATCH 20/22] ARM: dts: phycard-i.MX27: Add sdhc2 pinctrl Sascha Hauer
2014-01-18 18:09 ` Alexander Aring
2014-01-20 9:52 ` Sascha Hauer
2014-01-17 15:03 ` [PATCH 21/22] mci: imx: Add devicetree probe support Sascha Hauer
2014-01-17 15:03 ` [PATCH 22/22] ARM: phyCARD-i.MX27: Switch to " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389971012-22977-13-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox