* [PATCH 1/4] dt-bindings: add ARM GIC
@ 2014-01-25 20:15 Lucas Stach
2014-01-25 20:15 ` [PATCH 2/4] dt-bindings: add Tegra GPIO Lucas Stach
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Lucas Stach @ 2014-01-25 20:15 UTC (permalink / raw)
To: barebox
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
include/dt-bindings/interrupt-controller/arm-gic.h | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 include/dt-bindings/interrupt-controller/arm-gic.h
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
new file mode 100644
index 0000000..1ea1b70
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for the ARM GIC.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* interrupt specific cell 0 */
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+/*
+ * Interrupt specifier cell 2.
+ * The flaggs in irq.h are valid, plus those below.
+ */
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+#endif
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/4] dt-bindings: add Tegra GPIO
2014-01-25 20:15 [PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
@ 2014-01-25 20:15 ` Lucas Stach
2014-01-25 20:15 ` [PATCH 3/4] dt-bindings: add Tegra CAR Lucas Stach
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Lucas Stach @ 2014-01-25 20:15 UTC (permalink / raw)
To: barebox
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
include/dt-bindings/gpio/tegra-gpio.h | 50 +++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 include/dt-bindings/gpio/tegra-gpio.h
diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
new file mode 100644
index 0000000..4d179c0
--- /dev/null
+++ b/include/dt-bindings/gpio/tegra-gpio.h
@@ -0,0 +1,50 @@
+/*
+ * This header provides constants for binding nvidia,tegra*-gpio.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define TEGRA_GPIO_BANK_ID_A 0
+#define TEGRA_GPIO_BANK_ID_B 1
+#define TEGRA_GPIO_BANK_ID_C 2
+#define TEGRA_GPIO_BANK_ID_D 3
+#define TEGRA_GPIO_BANK_ID_E 4
+#define TEGRA_GPIO_BANK_ID_F 5
+#define TEGRA_GPIO_BANK_ID_G 6
+#define TEGRA_GPIO_BANK_ID_H 7
+#define TEGRA_GPIO_BANK_ID_I 8
+#define TEGRA_GPIO_BANK_ID_J 9
+#define TEGRA_GPIO_BANK_ID_K 10
+#define TEGRA_GPIO_BANK_ID_L 11
+#define TEGRA_GPIO_BANK_ID_M 12
+#define TEGRA_GPIO_BANK_ID_N 13
+#define TEGRA_GPIO_BANK_ID_O 14
+#define TEGRA_GPIO_BANK_ID_P 15
+#define TEGRA_GPIO_BANK_ID_Q 16
+#define TEGRA_GPIO_BANK_ID_R 17
+#define TEGRA_GPIO_BANK_ID_S 18
+#define TEGRA_GPIO_BANK_ID_T 19
+#define TEGRA_GPIO_BANK_ID_U 20
+#define TEGRA_GPIO_BANK_ID_V 21
+#define TEGRA_GPIO_BANK_ID_W 22
+#define TEGRA_GPIO_BANK_ID_X 23
+#define TEGRA_GPIO_BANK_ID_Y 24
+#define TEGRA_GPIO_BANK_ID_Z 25
+#define TEGRA_GPIO_BANK_ID_AA 26
+#define TEGRA_GPIO_BANK_ID_BB 27
+#define TEGRA_GPIO_BANK_ID_CC 28
+#define TEGRA_GPIO_BANK_ID_DD 29
+#define TEGRA_GPIO_BANK_ID_EE 30
+
+#define TEGRA_GPIO(bank, offset) \
+ ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
+
+#endif
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 3/4] dt-bindings: add Tegra CAR
2014-01-25 20:15 [PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
2014-01-25 20:15 ` [PATCH 2/4] dt-bindings: add Tegra GPIO Lucas Stach
@ 2014-01-25 20:15 ` Lucas Stach
2014-01-25 20:15 ` [PATCH 4/4] ARM: dts: pull in complete DTs from Linux 3.13 Lucas Stach
2014-01-27 8:22 ` [PATCH 1/4] dt-bindings: add ARM GIC Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Lucas Stach @ 2014-01-25 20:15 UTC (permalink / raw)
To: barebox
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
include/dt-bindings/clock/tegra20-car.h | 158 ++++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
create mode 100644 include/dt-bindings/clock/tegra20-car.h
diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
new file mode 100644
index 0000000..a1ae9a8
--- /dev/null
+++ b/include/dt-bindings/clock/tegra20-car.h
@@ -0,0 +1,158 @@
+/*
+ * This header provides constants for binding nvidia,tegra20-car.
+ *
+ * The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 95 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 96 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA20_CAR_H
+
+#define TEGRA20_CLK_CPU 0
+/* 1 */
+/* 2 */
+#define TEGRA20_CLK_AC97 3
+#define TEGRA20_CLK_RTC 4
+#define TEGRA20_CLK_TIMER 5
+#define TEGRA20_CLK_UARTA 6
+/* 7 (register bit affects uart2 and vfir) */
+#define TEGRA20_CLK_GPIO 8
+#define TEGRA20_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA20_CLK_I2S1 11
+#define TEGRA20_CLK_I2C1 12
+#define TEGRA20_CLK_NDFLASH 13
+#define TEGRA20_CLK_SDMMC1 14
+#define TEGRA20_CLK_SDMMC4 15
+#define TEGRA20_CLK_TWC 16
+#define TEGRA20_CLK_PWM 17
+#define TEGRA20_CLK_I2S2 18
+#define TEGRA20_CLK_EPP 19
+/* 20 (register bit affects vi and vi_sensor) */
+#define TEGRA20_CLK_GR2D 21
+#define TEGRA20_CLK_USBD 22
+#define TEGRA20_CLK_ISP 23
+#define TEGRA20_CLK_GR3D 24
+#define TEGRA20_CLK_IDE 25
+#define TEGRA20_CLK_DISP2 26
+#define TEGRA20_CLK_DISP1 27
+#define TEGRA20_CLK_HOST1X 28
+#define TEGRA20_CLK_VCP 29
+/* 30 */
+#define TEGRA20_CLK_CACHE2 31
+
+#define TEGRA20_CLK_MEM 32
+#define TEGRA20_CLK_AHBDMA 33
+#define TEGRA20_CLK_APBDMA 34
+/* 35 */
+#define TEGRA20_CLK_KBC 36
+#define TEGRA20_CLK_STAT_MON 37
+#define TEGRA20_CLK_PMC 38
+#define TEGRA20_CLK_FUSE 39
+#define TEGRA20_CLK_KFUSE 40
+#define TEGRA20_CLK_SBC1 41
+#define TEGRA20_CLK_NOR 42
+#define TEGRA20_CLK_SPI 43
+#define TEGRA20_CLK_SBC2 44
+#define TEGRA20_CLK_XIO 45
+#define TEGRA20_CLK_SBC3 46
+#define TEGRA20_CLK_DVC 47
+#define TEGRA20_CLK_DSI 48
+/* 49 (register bit affects tvo and cve) */
+#define TEGRA20_CLK_MIPI 50
+#define TEGRA20_CLK_HDMI 51
+#define TEGRA20_CLK_CSI 52
+#define TEGRA20_CLK_TVDAC 53
+#define TEGRA20_CLK_I2C2 54
+#define TEGRA20_CLK_UARTC 55
+/* 56 */
+#define TEGRA20_CLK_EMC 57
+#define TEGRA20_CLK_USB2 58
+#define TEGRA20_CLK_USB3 59
+#define TEGRA20_CLK_MPE 60
+#define TEGRA20_CLK_VDE 61
+#define TEGRA20_CLK_BSEA 62
+#define TEGRA20_CLK_BSEV 63
+
+#define TEGRA20_CLK_SPEEDO 64
+#define TEGRA20_CLK_UARTD 65
+#define TEGRA20_CLK_UARTE 66
+#define TEGRA20_CLK_I2C3 67
+#define TEGRA20_CLK_SBC4 68
+#define TEGRA20_CLK_SDMMC3 69
+#define TEGRA20_CLK_PEX 70
+#define TEGRA20_CLK_OWR 71
+#define TEGRA20_CLK_AFI 72
+#define TEGRA20_CLK_CSITE 73
+#define TEGRA20_CLK_PCIE_XCLK 74
+#define TEGRA20_CLK_AVPUCQ 75
+#define TEGRA20_CLK_LA 76
+/* 77 */
+/* 78 */
+/* 79 */
+/* 80 */
+/* 81 */
+/* 82 */
+/* 83 */
+#define TEGRA20_CLK_IRAMA 84
+#define TEGRA20_CLK_IRAMB 85
+#define TEGRA20_CLK_IRAMC 86
+#define TEGRA20_CLK_IRAMD 87
+#define TEGRA20_CLK_CRAM2 88
+#define TEGRA20_CLK_AUDIO_2X 89 /* a/k/a audio_2x_sync_clk */
+#define TEGRA20_CLK_CLK_D 90
+/* 91 */
+#define TEGRA20_CLK_CSUS 92
+#define TEGRA20_CLK_CDEV2 93
+#define TEGRA20_CLK_CDEV1 94
+/* 95 */
+
+#define TEGRA20_CLK_UARTB 96
+#define TEGRA20_CLK_VFIR 97
+#define TEGRA20_CLK_SPDIF_IN 98
+#define TEGRA20_CLK_SPDIF_OUT 99
+#define TEGRA20_CLK_VI 100
+#define TEGRA20_CLK_VI_SENSOR 101
+#define TEGRA20_CLK_TVO 102
+#define TEGRA20_CLK_CVE 103
+#define TEGRA20_CLK_OSC 104
+#define TEGRA20_CLK_CLK_32K 105 /* a/k/a clk_s */
+#define TEGRA20_CLK_CLK_M 106
+#define TEGRA20_CLK_SCLK 107
+#define TEGRA20_CLK_CCLK 108
+#define TEGRA20_CLK_HCLK 109
+#define TEGRA20_CLK_PCLK 110
+#define TEGRA20_CLK_BLINK 111
+#define TEGRA20_CLK_PLL_A 112
+#define TEGRA20_CLK_PLL_A_OUT0 113
+#define TEGRA20_CLK_PLL_C 114
+#define TEGRA20_CLK_PLL_C_OUT1 115
+#define TEGRA20_CLK_PLL_D 116
+#define TEGRA20_CLK_PLL_D_OUT0 117
+#define TEGRA20_CLK_PLL_E 118
+#define TEGRA20_CLK_PLL_M 119
+#define TEGRA20_CLK_PLL_M_OUT1 120
+#define TEGRA20_CLK_PLL_P 121
+#define TEGRA20_CLK_PLL_P_OUT1 122
+#define TEGRA20_CLK_PLL_P_OUT2 123
+#define TEGRA20_CLK_PLL_P_OUT3 124
+#define TEGRA20_CLK_PLL_P_OUT4 125
+#define TEGRA20_CLK_PLL_S 126
+#define TEGRA20_CLK_PLL_U 127
+
+#define TEGRA20_CLK_PLL_X 128
+#define TEGRA20_CLK_COP 129 /* a/k/a avp */
+#define TEGRA20_CLK_AUDIO 130 /* a/k/a audio_sync_clk */
+#define TEGRA20_CLK_PLL_REF 131
+#define TEGRA20_CLK_TWD 132
+#define TEGRA20_CLK_CLK_MAX 133
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA20_CAR_H */
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 4/4] ARM: dts: pull in complete DTs from Linux 3.13
2014-01-25 20:15 [PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
2014-01-25 20:15 ` [PATCH 2/4] dt-bindings: add Tegra GPIO Lucas Stach
2014-01-25 20:15 ` [PATCH 3/4] dt-bindings: add Tegra CAR Lucas Stach
@ 2014-01-25 20:15 ` Lucas Stach
2014-01-27 8:22 ` [PATCH 1/4] dt-bindings: add ARM GIC Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Lucas Stach @ 2014-01-25 20:15 UTC (permalink / raw)
To: barebox
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/tegra20-colibri-iris.dts | 63 +++-
arch/arm/dts/tegra20-colibri.dtsi | 338 ++++++++++++++++++-
arch/arm/dts/tegra20-paz00.dts | 318 ++++++++++++++++-
arch/arm/dts/tegra20.dtsi | 618 ++++++++++++++++++++++++++++++++--
4 files changed, 1303 insertions(+), 34 deletions(-)
diff --git a/arch/arm/dts/tegra20-colibri-iris.dts b/arch/arm/dts/tegra20-colibri-iris.dts
index 6b4ee00..31b0f59 100644
--- a/arch/arm/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/dts/tegra20-colibri-iris.dts
@@ -1,10 +1,16 @@
/dts-v1/;
-/include/ "tegra20-colibri.dtsi"
+#include "tegra20-colibri.dtsi"
/ {
model = "Toradex Colibri T20 on Iris";
- compatible = "toradex,iris", "toradex,colibri-t20", "nvidia,tegra20";
+ compatible = "toradex,iris", "toradex,colibri_t20", "nvidia,tegra20";
+
+ host1x {
+ hdmi {
+ status = "okay";
+ };
+ };
pinmux {
state_default: pinmux {
@@ -30,8 +36,61 @@
};
};
+ usb@c5000000 {
+ status = "okay";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ };
+
+ i2c_ddc: i2c@7000c400 {
+ status = "okay";
+ };
+
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
+ vmmc-supply = <&vcc_sd_reg>;
+ vqmmc-supply = <&vcc_sd_reg>;
+ };
+
+ regulators {
+ regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_host_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc_sd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
};
diff --git a/arch/arm/dts/tegra20-colibri.dtsi b/arch/arm/dts/tegra20-colibri.dtsi
index 1ae5375..d6b7aef 100644
--- a/arch/arm/dts/tegra20-colibri.dtsi
+++ b/arch/arm/dts/tegra20-colibri.dtsi
@@ -1,11 +1,18 @@
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Toradex Colibri T20";
compatible = "toradex,colibri_t20", "nvidia,tegra20";
- memory {
- reg = <0x00000000 0x20000000>;
+ host1x {
+ hdmi {
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&i2c_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
+ };
};
pinmux {
@@ -188,7 +195,330 @@
};
};
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ };
+
+ i2c_ddc: i2c@7000c400 {
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ clock-frequency = <400000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1275000>;
+ regulator-max-microvolt = <1275000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* LDO3 is not connected to anything */
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ hdmi_vdd_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ hdmi_pll_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ temperature-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+ };
+
+ pmc {
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ memory-controller@7000f400 {
+ emc-table@83250 {
+ reg = <83250>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <83250>;
+ nvidia,emc-registers = <0x00000005 0x00000011
+ 0x00000004 0x00000002 0x00000004 0x00000004
+ 0x00000001 0x0000000a 0x00000002 0x00000002
+ 0x00000001 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x0000025f
+ 0x00000000 0x00000003 0x00000003 0x00000002
+ 0x00000002 0x00000001 0x00000008 0x000000c8
+ 0x00000003 0x00000005 0x00000003 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00520006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@133200 {
+ reg = <133200>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <133200>;
+ nvidia,emc-registers = <0x00000008 0x00000019
+ 0x00000006 0x00000002 0x00000004 0x00000004
+ 0x00000001 0x0000000a 0x00000002 0x00000002
+ 0x00000002 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x0000039f
+ 0x00000000 0x00000003 0x00000003 0x00000002
+ 0x00000002 0x00000001 0x00000008 0x000000c8
+ 0x00000003 0x00000007 0x00000003 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00510006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@166500 {
+ reg = <166500>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <166500>;
+ nvidia,emc-registers = <0x0000000a 0x00000021
+ 0x00000008 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000a 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x000004df
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x00000009 0x000000c8
+ 0x00000003 0x00000009 0x00000004 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x004f0006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = <333000>;
+ nvidia,emc-registers = <0x00000014 0x00000041
+ 0x0000000f 0x00000005 0x00000004 0x00000005
+ 0x00000003 0x0000000a 0x00000005 0x00000005
+ 0x00000004 0x00000001 0x00000003 0x00000004
+ 0x00000003 0x00000009 0x0000000c 0x000009ff
+ 0x00000000 0x00000003 0x00000003 0x00000005
+ 0x00000005 0x00000001 0x0000000e 0x000000c8
+ 0x00000003 0x00000011 0x00000006 0x0000000c
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0x00380006
+ 0x00000010 0x00000008 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000>;
+ };
+ };
+
+ ac97: ac97 {
+ status = "okay";
+ nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
+ };
+
sdhci@c8000600 {
- cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+ "nvidia,tegra-audio-wm9712";
+ nvidia,model = "Colibri T20 AC97 Audio";
+
+ nvidia,audio-routing =
+ "Headphone", "HPOUTL",
+ "Headphone", "HPOUTR",
+ "LineIn", "LINEINL",
+ "LineIn", "LINEINR",
+ "Mic", "MIC1";
+
+ nvidia,ac97-controller = <&ac97>;
+
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "internal_usb";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+ };
};
};
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
index e8486aa..d82d406 100644
--- a/arch/arm/dts/tegra20-paz00.dts
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -1,13 +1,22 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi"
/ {
model = "Toshiba AC100 / Dynabook AZ";
compatible = "compal,paz00", "nvidia,tegra20";
- memory {
- reg = <0x00000000 0x20000000>;
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
+ };
};
pinmux {
@@ -225,4 +234,307 @@
};
};
};
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006200 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ alc5632: alc5632@1e {
+ compatible = "realtek,alc5632";
+ reg = <0x1e>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ hdmi_ddc: i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ nvec {
+ compatible = "nvidia,nvec";
+ reg = <0x7000c500 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <80000>;
+ request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ slave-addr = <138>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ clock-names = "div-clk", "fast-clk";
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&p5valw_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ sm0 {
+ regulator-name = "+1.2vs_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ sm1 {
+ regulator-name = "+1.0vs_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-name = "+3.7vs_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ ldo1 {
+ regulator-name = "+1.1vs_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "+1.2vs_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo3 {
+ regulator-name = "+3.3vs_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4 {
+ regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5 {
+ regulator-name = "+2.85vs_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo6 {
+ /*
+ * Research indicates this should be
+ * 1.8v; other boards that use this
+ * rail for the same purpose need it
+ * set to 1.8v. The schematic signal
+ * name is incorrect; perhaps copied
+ * from an incorrect NVIDIA reference.
+ */
+ regulator-name = "+2.85vs_ldo6,avdd_vdac";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ hdmi_vdd_reg: ldo7 {
+ regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ hdmi_pll_reg: ldo8 {
+ regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9 {
+ regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo_rtc {
+ regulator-name = "+3.3vs_rtc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ adt7461@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ usb@c5000000 {
+ status = "okay";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ };
+
+ usb@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
+ };
+
+ usb-phy@c5004000 {
+ status = "okay";
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_LOW>;
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000000 {
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "wifi-led";
+ gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "rfkill0";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ p5valw_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "+5valw";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-alc5632-paz00",
+ "nvidia,tegra-audio-alc5632";
+
+ nvidia,model = "Compal PAZ00";
+
+ nvidia,audio-routing =
+ "Int Spk", "SPKOUT",
+ "Int Spk", "SPKOUTN",
+ "Headset Mic", "MICBIAS1",
+ "MIC1", "Headset Mic",
+ "Headset Stereophone", "HPR",
+ "Headset Stereophone", "HPL",
+ "DMICDAT", "Digital Mic";
+
+ nvidia,audio-codec = <&alc5632>;
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+ GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 2b333f5..df40b54 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,15 +1,159 @@
-/include/ "skeleton.dtsi"
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ serial4 = &uarte;
+ };
+
+ host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+ clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ };
+
+ vi {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
+ };
+
+ epp {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ };
+
+ isp {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "disp1", "parent";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "disp2", "parent";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "hdmi", "parent";
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>;
+ status = "disabled";
+ };
+ };
+
+ timer@50004600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x50040600 0x20>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&tegra_car TEGRA20_CLK_TWD>;
+ };
+
+ intc: interrupt-controller {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x50041000 0x1000
+ 0x50040100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x50043000 0x1000>;
+ arm,data-latency = <5 5 2>;
+ arm,tag-latency = <4 4 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
timer@60005000 {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_TIMER>;
};
tegra_car: clock {
@@ -18,16 +162,43 @@
#clock-cells = <1>;
};
+ apbdma: dma {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+ };
+
+ ahb {
+ compatible = "nvidia,tegra20-ahb";
+ reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+ };
+
gpio: gpio {
compatible = "nvidia,tegra20-gpio";
reg = <0x6000d000 0x1000>;
- interrupts = <0 32 0x04
- 0 33 0x04
- 0 34 0x04
- 0 35 0x04
- 0 55 0x04
- 0 87 0x04
- 0 89 0x04>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
@@ -35,47 +206,444 @@
};
pinmux: pinmux {
- compatible = "nvidia,tegra20-pinmux";
- reg = <0x70000014 0x10 /* Tri-state registers */
- 0x70000080 0x20 /* Mux registers */
- 0x700000a0 0x14 /* Pull-up/down registers */
- 0x70000868 0xa8>; /* Pad control registers */
+ compatible = "nvidia,tegra20-pinmux";
+ reg = <0x70000014 0x10 /* Tri-state registers */
+ 0x70000080 0x20 /* Mux registers */
+ 0x700000a0 0x14 /* Pull-up/down registers */
+ 0x70000868 0xa8>; /* Pad control registers */
+ };
+
+ das {
+ compatible = "nvidia,tegra20-das";
+ reg = <0x70000c00 0x80>;
+ };
+
+ tegra_ac97: ac97 {
+ compatible = "nvidia,tegra20-ac97";
+ reg = <0x70002000 0x200>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 12>;
+ clocks = <&tegra_car TEGRA20_CLK_AC97>;
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@70002800 {
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002800 0x200>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 2>;
+ clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@70002a00 {
+ compatible = "nvidia,tegra20-i2s";
+ reg = <0x70002a00 0x200>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 1>;
+ clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+ status = "disabled";
+ };
+
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+ * driver, the comptible is "nvidia,tegra20-hsuart".
+ */
+ uarta: serial@70006000 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006000 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 8>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+ status = "disabled";
+ };
+
+ uartb: serial@70006040 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006040 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 9>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+ status = "disabled";
+ };
+
+ uartc: serial@70006200 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006200 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 10>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+ status = "disabled";
+ };
+
+ uartd: serial@70006300 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006300 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 19>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+ status = "disabled";
+ };
+
+ uarte: serial@70006400 {
+ compatible = "nvidia,tegra20-uart";
+ reg = <0x70006400 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 20>;
+ clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+ status = "disabled";
+ };
+
+ pwm: pwm {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car TEGRA20_CLK_PWM>;
+ status = "disabled";
+ };
+
+ rtc {
+ compatible = "nvidia,tegra20-rtc";
+ reg = <0x7000e000 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_RTC>;
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
+
+ spi@7000c380 {
+ compatible = "nvidia,tegra20-sflash";
+ reg = <0x7000c380 0x80>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 11>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SPI>;
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra20-i2c-dvc";
+ reg = <0x7000d000 0x200>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_DVC>,
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
+
+ spi@7000d400 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d400 0x200>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d600 0x200>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d800 0x200>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000da00 0x200>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+ status = "disabled";
+ };
+
+ kbc {
+ compatible = "nvidia,tegra20-kbc";
+ reg = <0x7000e200 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_KBC>;
+ status = "disabled";
};
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+ };
+
+ memory-controller@7000f000 {
+ compatible = "nvidia,tegra20-mc";
+ reg = <0x7000f000 0x024
+ 0x7000f03c 0x3c4>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ iommu {
+ compatible = "nvidia,tegra20-gart";
+ reg = <0x7000f024 0x00000018 /* controller registers */
+ 0x58000000 0x02000000>; /* GART aperture */
+ };
+
+ memory-controller@7000f400 {
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcie-controller {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800 /* PADS registers */
+ 0x80003800 0x00000200 /* AFI registers */
+ 0x90000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
+ GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
+ 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
+ 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */
+ 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car TEGRA20_CLK_PEX>,
+ <&tegra_car TEGRA20_CLK_AFI>,
+ <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
+ <&tegra_car TEGRA20_CLK_PLL_E>;
+ clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+ usb@c5000000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ nvidia,has-legacy-mode;
+ clocks = <&tegra_car TEGRA20_CLK_USBD>;
+ nvidia,needs-double-reset;
+ nvidia,phy = <&phy1>;
+ status = "disabled";
+ };
+
+ phy1: usb-phy@c5000000 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA20_CLK_USBD>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CLK_M>,
+ <&tegra_car TEGRA20_CLK_USBD>;
+ clock-names = "reg", "pll_u", "timer", "utmi-pads";
+ nvidia,has-legacy-mode;
+ nvidia,hssync-start-delay = <9>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <9>;
+ nvidia,xcvr-lsfslew = <1>;
+ nvidia,xcvr-lsrslew = <1>;
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5004000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "ulpi";
+ clocks = <&tegra_car TEGRA20_CLK_USB2>;
+ nvidia,phy = <&phy2>;
+ status = "disabled";
+ };
+
+ phy2: usb-phy@c5004000 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5004000 0x4000>;
+ phy_type = "ulpi";
+ clocks = <&tegra_car TEGRA20_CLK_USB2>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CDEV2>;
+ clock-names = "reg", "pll_u", "ulpi-link";
+ status = "disabled";
+ };
+
+ usb@c5008000 {
+ compatible = "nvidia,tegra20-ehci", "usb-ehci";
+ reg = <0xc5008000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA20_CLK_USB3>;
+ nvidia,phy = <&phy3>;
+ status = "disabled";
+ };
+
+ phy3: usb-phy@c5008000 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA20_CLK_USB3>,
+ <&tegra_car TEGRA20_CLK_PLL_U>,
+ <&tegra_car TEGRA20_CLK_CLK_M>,
+ <&tegra_car TEGRA20_CLK_USBD>;
+ clock-names = "reg", "pll_u", "timer", "utmi-pads";
+ nvidia,hssync-start-delay = <9>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <9>;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ status = "disabled";
};
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
- interrupts = <0 14 0x04>;
- clocks = <&tegra_car 14>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
status = "disabled";
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
- interrupts = <0 15 0x04>;
- clocks = <&tegra_car 9>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
status = "disabled";
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
- interrupts = <0 19 0x04>;
- clocks = <&tegra_car 69>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
status = "disabled";
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
- interrupts = <0 31 0x04>;
- clocks = <&tegra_car 15>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
status = "disabled";
};
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
--
1.8.4.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/4] dt-bindings: add ARM GIC
2014-01-25 20:15 [PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
` (2 preceding siblings ...)
2014-01-25 20:15 ` [PATCH 4/4] ARM: dts: pull in complete DTs from Linux 3.13 Lucas Stach
@ 2014-01-27 8:22 ` Sascha Hauer
3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2014-01-27 8:22 UTC (permalink / raw)
To: Lucas Stach; +Cc: barebox
On Sat, Jan 25, 2014 at 09:15:55PM +0100, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
Applied, thanks
Sascha
> ---
> include/dt-bindings/interrupt-controller/arm-gic.h | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 include/dt-bindings/interrupt-controller/arm-gic.h
>
> diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
> new file mode 100644
> index 0000000..1ea1b70
> --- /dev/null
> +++ b/include/dt-bindings/interrupt-controller/arm-gic.h
> @@ -0,0 +1,22 @@
> +/*
> + * This header provides constants for the ARM GIC.
> + */
> +
> +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
> +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/* interrupt specific cell 0 */
> +
> +#define GIC_SPI 0
> +#define GIC_PPI 1
> +
> +/*
> + * Interrupt specifier cell 2.
> + * The flaggs in irq.h are valid, plus those below.
> + */
> +#define GIC_CPU_MASK_RAW(x) ((x) << 8)
> +#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
> +
> +#endif
> --
> 1.8.4.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-01-27 8:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-25 20:15 [PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
2014-01-25 20:15 ` [PATCH 2/4] dt-bindings: add Tegra GPIO Lucas Stach
2014-01-25 20:15 ` [PATCH 3/4] dt-bindings: add Tegra CAR Lucas Stach
2014-01-25 20:15 ` [PATCH 4/4] ARM: dts: pull in complete DTs from Linux 3.13 Lucas Stach
2014-01-27 8:22 ` [PATCH 1/4] dt-bindings: add ARM GIC Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox