mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: i.MX25 devicetree support
Date: Fri, 31 Jan 2014 15:23:09 +0100	[thread overview]
Message-ID: <1391178204-20889-1-git-send-email-s.hauer@pengutronix.de> (raw)

This series adds devicetree support for the i.MX25 and
converts the Karo TX25 over to devicetree and multiboard
support.

Sascha
----------------------------------------------------------------
Sascha Hauer (15):
      mci: imx-esdhc: Add i.MX25 compatible entry
      ARM: dts: Add i.MX25 devicetree files
      ARM: dts: i.MX25: Add mmc aliases
      ARM: dts: i.MX25: remove disabled status of usbmisc unit
      ARM: i.MX25: Add missing GPT clock lookups
      ARM: dts: Add i.MX25 Karo TX25 dts
      ARM: dts: i.MX25: Add iram to devicetree
      ARM: dts: Karo TX25: Add pinctrl nodes
      ARM: dts: Karo TX25: Add phy-reset-gpio
      ARM: dts: Karo TX25: add missing nfc properties
      ARM: dts: Karo TX25: add phy supply for fec
      ARM: dts: Karo TX25: add barebox specifics
      ARM: i.MX25: Karo TX25: Switch to devicetree support
      ARM: i.MX: cleanup bootmode selection
      ARM: i.MX: Karo TX25: Switch to multiboard support

 arch/arm/boards/eukrea_cpuimx25/lowlevel.c         |  10 +-
 arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S    |   4 +-
 arch/arm/boards/eukrea_cpuimx35/lowlevel.c         |  25 +-
 .../boards/freescale-mx25-3-stack/lowlevel_init.S  |   5 +-
 .../boards/freescale-mx35-3-stack/lowlevel_init.S  |   4 +-
 arch/arm/boards/guf-cupid/lowlevel.c               |  21 +-
 arch/arm/boards/guf-neso/lowlevel.c                |  11 +-
 arch/arm/boards/imx21ads/lowlevel_init.S           |   5 +-
 arch/arm/boards/karo-tx25/board.c                  | 132 ++---
 arch/arm/boards/karo-tx25/lowlevel.c               |  23 +-
 arch/arm/boards/pcm037/lowlevel.c                  |  14 +-
 arch/arm/boards/pcm038/lowlevel.c                  |  10 +-
 arch/arm/boards/pcm043/lowlevel.c                  |  25 +-
 arch/arm/boards/phycard-i.MX27/lowlevel.c          |   4 -
 arch/arm/configs/tx25stk5_defconfig                |  35 +-
 arch/arm/dts/Makefile                              |   2 +
 arch/arm/dts/imx25-karo-tx25.dts                   | 143 ++++++
 arch/arm/dts/imx25-pinfunc.h                       | 494 ++++++++++++++++++
 arch/arm/dts/imx25.dtsi                            | 558 +++++++++++++++++++++
 arch/arm/mach-imx/Kconfig                          |  40 +-
 arch/arm/mach-imx/clk-imx25.c                      |   3 +
 arch/arm/mach-imx/include/mach/imx25-regs.h        |   3 +
 drivers/mci/imx-esdhc.c                            |   2 +
 images/Makefile.imx                                |   5 +
 24 files changed, 1371 insertions(+), 207 deletions(-)
 create mode 100644 arch/arm/dts/imx25-karo-tx25.dts
 create mode 100644 arch/arm/dts/imx25-pinfunc.h
 create mode 100644 arch/arm/dts/imx25.dtsi

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2014-01-31 14:23 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-31 14:23 Sascha Hauer [this message]
2014-01-31 14:23 ` [PATCH 01/15] mci: imx-esdhc: Add i.MX25 compatible entry Sascha Hauer
2014-01-31 14:23 ` [PATCH 02/15] ARM: dts: Add i.MX25 devicetree files Sascha Hauer
2014-01-31 14:23 ` [PATCH 03/15] ARM: dts: i.MX25: Add mmc aliases Sascha Hauer
2014-01-31 14:23 ` [PATCH 04/15] ARM: dts: i.MX25: remove disabled status of usbmisc unit Sascha Hauer
2014-01-31 14:23 ` [PATCH 05/15] ARM: i.MX25: Add missing GPT clock lookups Sascha Hauer
2014-01-31 14:23 ` [PATCH 06/15] ARM: dts: Add i.MX25 Karo TX25 dts Sascha Hauer
2014-01-31 14:23 ` [PATCH 07/15] ARM: dts: i.MX25: Add iram to devicetree Sascha Hauer
2014-01-31 14:23 ` [PATCH 08/15] ARM: dts: Karo TX25: Add pinctrl nodes Sascha Hauer
2014-01-31 14:23 ` [PATCH 09/15] ARM: dts: Karo TX25: Add phy-reset-gpio Sascha Hauer
2014-01-31 14:23 ` [PATCH 10/15] ARM: dts: Karo TX25: add missing nfc properties Sascha Hauer
2014-01-31 14:23 ` [PATCH 11/15] ARM: dts: Karo TX25: add phy supply for fec Sascha Hauer
2014-01-31 14:23 ` [PATCH 12/15] ARM: dts: Karo TX25: add barebox specifics Sascha Hauer
2014-01-31 14:23 ` [PATCH 13/15] ARM: i.MX25: Karo TX25: Switch to devicetree support Sascha Hauer
2014-01-31 14:35   ` Alexander Shiyan
2014-02-01 18:13     ` Sascha Hauer
2014-02-01 18:24       ` Alexander Shiyan
2014-02-01 18:37         ` Sascha Hauer
2014-01-31 14:23 ` [PATCH 14/15] ARM: i.MX: cleanup bootmode selection Sascha Hauer
2014-01-31 14:23 ` [PATCH 15/15] ARM: i.MX: Karo TX25: Switch to multiboard support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391178204-20889-1-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox