From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WDt64-0000RZ-Gh for barebox@lists.infradead.org; Thu, 13 Feb 2014 10:00:48 +0000 From: Sascha Hauer Date: Thu, 13 Feb 2014 11:00:21 +0100 Message-Id: <1392285621-17485-6-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1392285621-17485-1-git-send-email-s.hauer@pengutronix.de> References: <1392285621-17485-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 5/5] PWM: Add i.MX PWM driver To: barebox@lists.infradead.org The Kernel driver from Linux-3.13 with some adjustments for barebox. Signed-off-by: Sascha Hauer --- drivers/pwm/Kconfig | 6 ++ drivers/pwm/Makefile | 3 +- drivers/pwm/pwm-imx.c | 269 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 277 insertions(+), 1 deletion(-) create mode 100644 drivers/pwm/pwm-imx.c diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index fc08363..8324d5e 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -16,4 +16,10 @@ config PWM_PXA This enables PWM support for Intel/Marvell PXA chips, such as the PXA25x, PXA27x. +config PWM_IMX + bool "i.MX PWM Support" + depends on ARCH_IMX + help + This enables PWM support for Freescale i.MX SoCs + endif diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index c886bd5..dea9956 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_PWM) += core.o -obj-$(CONFIG_PWM_PXA) += pxa_pwm.o \ No newline at end of file +obj-$(CONFIG_PWM_PXA) += pxa_pwm.o +obj-$(CONFIG_PWM_IMX) += pwm-imx.o diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c new file mode 100644 index 0000000..fa2d68e --- /dev/null +++ b/drivers/pwm/pwm-imx.c @@ -0,0 +1,269 @@ +/* + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from pxa PWM driver by eric miao + */ + +#include +#include +#include +#include +#include +#include +#include + +/* i.MX1 and i.MX21 share the same PWM function block: */ + +#define MX1_PWMC 0x00 /* PWM Control Register */ +#define MX1_PWMS 0x04 /* PWM Sample Register */ +#define MX1_PWMP 0x08 /* PWM Period Register */ + +#define MX1_PWMC_EN (1 << 4) + +/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ + +#define MX3_PWMCR 0x00 /* PWM Control Register */ +#define MX3_PWMSAR 0x0C /* PWM Sample Register */ +#define MX3_PWMPR 0x10 /* PWM Period Register */ +#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) +#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) +#define MX3_PWMCR_CLKSRC_IPG (1 << 16) +#define MX3_PWMCR_EN (1 << 0) + +struct imx_chip { + struct clk *clk_per; + + void __iomem *mmio_base; + + struct pwm_chip chip; + + int (*config)(struct pwm_chip *chip, + int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); +}; + +#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip) + +static int imx_pwm_config_v1(struct pwm_chip *chip, + int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + + /* + * The PWM subsystem allows for exact frequencies. However, + * I cannot connect a scope on my device to the PWM line and + * thus cannot provide the program the PWM controller + * exactly. Instead, I'm relying on the fact that the + * Bootloader (u-boot or WinCE+haret) has programmed the PWM + * function group already. So I'll just modify the PWM sample + * register to follow the ratio of duty_ns vs. period_ns + * accordingly. + * + * This is good enough for programming the brightness of + * the LCD backlight. + * + * The real implementation would divide PERCLK[0] first by + * both the prescaler (/1 .. /128) and then by CLKSEL + * (/2 .. /16). + */ + u32 max = readl(imx->mmio_base + MX1_PWMP); + u32 p = max * duty_ns / period_ns; + writel(max - p, imx->mmio_base + MX1_PWMS); + + return 0; +} + +static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX1_PWMC); + + if (enable) + val |= MX1_PWMC_EN; + else + val &= ~MX1_PWMC_EN; + + writel(val, imx->mmio_base + MX1_PWMC); +} + +static int imx_pwm_config_v2(struct pwm_chip *chip, + int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + unsigned long long c; + unsigned long period_cycles, duty_cycles, prescale; + u32 cr; + + c = clk_get_rate(imx->clk_per); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + prescale = period_cycles / 0x10000 + 1; + + period_cycles /= prescale; + c = (unsigned long long)period_cycles * duty_ns; + do_div(c, period_ns); + duty_cycles = c; + + /* + * according to imx pwm RM, the real period value should be + * PERIOD value in PWMPR plus 2. + */ + if (period_cycles > 2) + period_cycles -= 2; + else + period_cycles = 0; + + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); + writel(period_cycles, imx->mmio_base + MX3_PWMPR); + + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; + + if (readl(imx->mmio_base + MX3_PWMCR) & MX3_PWMCR_EN) + cr |= MX3_PWMCR_EN; + + writel(cr, imx->mmio_base + MX3_PWMCR); + + return 0; +} + +static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) +{ + struct imx_chip *imx = to_imx_chip(chip); + u32 val; + + val = readl(imx->mmio_base + MX3_PWMCR); + + if (enable) + val |= MX3_PWMCR_EN; + else + val &= ~MX3_PWMCR_EN; + + writel(val, imx->mmio_base + MX3_PWMCR); +} + +static int imx_pwm_config(struct pwm_chip *chip, + int duty_ns, int period_ns) +{ + struct imx_chip *imx = to_imx_chip(chip); + int ret; + + ret = imx->config(chip, duty_ns, period_ns); + + return ret; +} + +static int imx_pwm_enable(struct pwm_chip *chip) +{ + struct imx_chip *imx = to_imx_chip(chip); + int ret; + + ret = clk_enable(imx->clk_per); + if (ret) + return ret; + + imx->set_enable(chip, true); + + return 0; +} + +static void imx_pwm_disable(struct pwm_chip *chip) +{ + struct imx_chip *imx = to_imx_chip(chip); + + imx->set_enable(chip, false); + + clk_disable(imx->clk_per); +} + +static struct pwm_ops imx_pwm_ops = { + .enable = imx_pwm_enable, + .disable = imx_pwm_disable, + .config = imx_pwm_config, +}; + +struct imx_pwm_data { + int (*config)(struct pwm_chip *chip, + int duty_ns, int period_ns); + void (*set_enable)(struct pwm_chip *chip, bool enable); +}; + +static struct imx_pwm_data imx_pwm_data_v1 = { + .config = imx_pwm_config_v1, + .set_enable = imx_pwm_set_enable_v1, +}; + +static struct imx_pwm_data imx_pwm_data_v2 = { + .config = imx_pwm_config_v2, + .set_enable = imx_pwm_set_enable_v2, +}; + +static struct of_device_id imx_pwm_dt_ids[] = { + { .compatible = "fsl,imx1-pwm", .data = (unsigned long)&imx_pwm_data_v1, }, + { .compatible = "fsl,imx27-pwm", .data = (unsigned long)&imx_pwm_data_v2, }, + { /* sentinel */ } +}; + +static int imx_pwm_probe(struct device_d *dev) +{ + const struct imx_pwm_data *data; + struct imx_chip *imx; + int ret = 0; + + ret = dev_get_drvdata(dev, (unsigned long *)&data); + if (ret) + return ret; + + imx = xzalloc(sizeof(*imx)); + + imx->clk_per = clk_get(dev, "per"); + if (IS_ERR(imx->clk_per)) + return PTR_ERR(imx->clk_per); + + imx->chip.ops = &imx_pwm_ops; + if (dev->device_node) { + imx->chip.devname = of_alias_get(dev->device_node); + if (!imx->chip.devname) { + dev_err(dev, "no alias for pwm\n"); + return -EINVAL; + } + } else { + imx->chip.devname = asprintf("pwm%d", dev->id); + } + + imx->mmio_base = dev_request_mem_region(dev, 0); + if (!imx->mmio_base) + return -EBUSY; + + imx->config = data->config; + imx->set_enable = data->set_enable; + + ret = pwmchip_add(&imx->chip, dev); + if (ret < 0) + return ret; + + return 0; +} + +static struct driver_d imx_pwm_driver = { + .name = "imx-pwm", + .of_compatible = imx_pwm_dt_ids, + .probe = imx_pwm_probe, +}; + +coredevice_platform_driver(imx_pwm_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer "); -- 1.8.5.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox