From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WGs9Q-0007Jp-7X for barebox@lists.infradead.org; Fri, 21 Feb 2014 15:36:40 +0000 From: Sascha Hauer Date: Fri, 21 Feb 2014 16:36:09 +0100 Message-Id: <1392996969-23644-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] ARM: i.MX6: Add Garz+Fricke Santaro board support To: barebox@lists.infradead.org Most devices relevant for barebox like sd/emmc/network/uarts work. Devicetree contains several undefined drive strength settings, these can be fixed once the kernel has sorted this out. Signed-off-by: Sascha Hauer --- arch/arm/boards/Makefile | 1 + arch/arm/boards/guf-santaro/Makefile | 2 + arch/arm/boards/guf-santaro/board.c | 70 +++ arch/arm/boards/guf-santaro/flash-header.imxcfg | 109 +++++ arch/arm/boards/guf-santaro/lowlevel.c | 48 ++ arch/arm/configs/imx_v7_defconfig | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/imx6q-guf-santaro.dts | 571 ++++++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 4 + images/Makefile.imx | 5 + 10 files changed, 813 insertions(+) create mode 100644 arch/arm/boards/guf-santaro/Makefile create mode 100644 arch/arm/boards/guf-santaro/board.c create mode 100644 arch/arm/boards/guf-santaro/flash-header.imxcfg create mode 100644 arch/arm/boards/guf-santaro/lowlevel.c create mode 100644 arch/arm/dts/imx6q-guf-santaro.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index befddd0..52d1ab1 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += freescale-mx53-vmx53/ obj-$(CONFIG_MACH_GE863) += telit-evk-pro3/ obj-$(CONFIG_MACH_GK802) += gk802/ obj-$(CONFIG_MACH_GUF_CUPID) += guf-cupid/ +obj-$(CONFIG_MACH_GUF_SANTARO) += guf-santaro/ obj-$(CONFIG_MACH_GUF_VINCELL) += guf-vincell/ obj-$(CONFIG_MACH_HIGHBANK) += highbank/ obj-$(CONFIG_MACH_IMX21ADS) += freescale-mx21-ads/ diff --git a/arch/arm/boards/guf-santaro/Makefile b/arch/arm/boards/guf-santaro/Makefile new file mode 100644 index 0000000..01c7a25 --- /dev/null +++ b/arch/arm/boards/guf-santaro/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o +lwl-y += lowlevel.o diff --git a/arch/arm/boards/guf-santaro/board.c b/arch/arm/boards/guf-santaro/board.c new file mode 100644 index 0000000..198c90a --- /dev/null +++ b/arch/arm/boards/guf-santaro/board.c @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2014 Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int santaro_postcore_init(void) +{ + if (!of_machine_is_compatible("guf,imx6q-santaro")) + return 0; + + imx6_init_lowlevel(); + + return 0; +} +postcore_initcall(santaro_postcore_init); + +static int santaro_device_init(void) +{ + uint32_t flag_sd = 0, flag_emmc = 0; + + if (!of_machine_is_compatible("guf,imx6q-santaro")) + return 0; + + barebox_set_hostname("santaro"); + + writew(0x0, MX6_WDOG1_BASE_ADDR + 0x8); + writew(0x0, MX6_WDOG2_BASE_ADDR + 0x8); + + if (bootsource_get() == BOOTSOURCE_MMC) { + switch (bootsource_get_instance()) { + case 1: + flag_sd |= BBU_HANDLER_FLAG_DEFAULT; + break; + case 3: + flag_emmc |= BBU_HANDLER_FLAG_DEFAULT; + break; + } + } + + imx6_bbu_internal_mmc_register_handler("sd", "/dev/mmc1", + flag_sd, NULL, 0, 0); + imx6_bbu_internal_mmc_register_handler("emmc", "/dev/mmc3.boot0", + flag_emmc, NULL, 0, 0); + + return 0; +} +device_initcall(santaro_device_init); diff --git a/arch/arm/boards/guf-santaro/flash-header.imxcfg b/arch/arm/boards/guf-santaro/flash-header.imxcfg new file mode 100644 index 0000000..510cae3 --- /dev/null +++ b/arch/arm/boards/guf-santaro/flash-header.imxcfg @@ -0,0 +1,109 @@ +loadaddr 0x10000000 +soc imx6 +dcdofs 0x400 + +wm 32 0x020e0798 0x000c0000 +wm 32 0x020e0758 0x00000000 + +wm 32 0x020e0588 0x00000030 +wm 32 0x020e0594 0x00000030 + +wm 32 0x020e056c 0x00000030 +wm 32 0x020e0578 0x00000030 +wm 32 0x020e074c 0x00000030 + +wm 32 0x020e057c 0x00000030 + +wm 32 0x020e058c 0x00000000 +wm 32 0x020e059c 0x00000030 +wm 32 0x020e05a0 0x00000030 +wm 32 0x020e078c 0x00000030 + +wm 32 0x020e0750 0x00020000 + +wm 32 0x020e05a8 0x00000030 +wm 32 0x020e05b0 0x00000030 +wm 32 0x020e0524 0x00000030 +wm 32 0x020e051c 0x00000030 +wm 32 0x020e0518 0x00000030 +wm 32 0x020e050c 0x00000030 +wm 32 0x020e05b8 0x00000030 +wm 32 0x020e05c0 0x00000030 + +wm 32 0x020e0774 0x00020000 + +wm 32 0x020e0784 0x00000030 +wm 32 0x020e0788 0x00000030 +wm 32 0x020e0794 0x00000030 +wm 32 0x020e079c 0x00000030 +wm 32 0x020e07a0 0x00000030 +wm 32 0x020e07a4 0x00000030 +wm 32 0x020e07a8 0x00000030 +wm 32 0x020e0748 0x00000030 + +wm 32 0x020e05ac 0x00000030 +wm 32 0x020e05b4 0x00000030 +wm 32 0x020e0528 0x00000030 +wm 32 0x020e0520 0x00000030 +wm 32 0x020e0514 0x00000030 +wm 32 0x020e0510 0x00000030 +wm 32 0x020e05bc 0x00000030 +wm 32 0x020e05c4 0x00000030 + +wm 32 0x021b0800 0xa1390003 + +wm 32 0x021b080c 0x001f001f +wm 32 0x021b0810 0x001f001f +wm 32 0x021b480c 0x001f001f +wm 32 0x021b4810 0x001f001f + +wm 32 0x021b083c 0x4333033f +wm 32 0x021b0840 0x032c031d +wm 32 0x021b483c 0x43200332 +wm 32 0x021b4840 0x031a026a +wm 32 0x021b0848 0x4d464746 +wm 32 0x021b4848 0x47453f4d +wm 32 0x021b0850 0x3e434440 +wm 32 0x021b4850 0x47384839 + +wm 32 0x021b081c 0x33333333 +wm 32 0x021b0820 0x33333333 +wm 32 0x021b0824 0x33333333 +wm 32 0x021b0828 0x33333333 +wm 32 0x021b481c 0x33333333 +wm 32 0x021b4820 0x33333333 +wm 32 0x021b4824 0x33333333 +wm 32 0x021b4828 0x33333333 + +wm 32 0x021b08b8 0x00000800 +wm 32 0x021b48b8 0x00000800 + +wm 32 0x021b0004 0x00020036 +wm 32 0x021b0008 0x09444040 +wm 32 0x021b000c 0x555a7975 +wm 32 0x021b0010 0xff538f64 +wm 32 0x021b0014 0x01ff00db +wm 32 0x021b0018 0x00001740 + +wm 32 0x021b001c 0x00008000 +wm 32 0x021b002c 0x000026d2 +wm 32 0x021b0030 0x005a1023 +wm 32 0x021b0040 0x00000027 + +wm 32 0x021b0000 0x831a0000 + +wm 32 0x021b001c 0x04088032 +wm 32 0x021b001c 0x00008033 +wm 32 0x021b001c 0x00048031 +wm 32 0x021b001c 0x09408030 +wm 32 0x021b001c 0x04008040 + +wm 32 0x021b0020 0x00005800 + +wm 32 0x021b0818 0x00011117 +wm 32 0x021b4818 0x00011117 + +wm 32 0x021b0004 0x00025576 +wm 32 0x021b0404 0x00011006 +wm 32 0x021b001c 0x00000000 + diff --git a/arch/arm/boards/guf-santaro/lowlevel.c b/arch/arm/boards/guf-santaro/lowlevel.c new file mode 100644 index 0000000..da6d92a --- /dev/null +++ b/arch/arm/boards/guf-santaro/lowlevel.c @@ -0,0 +1,48 @@ +#include +#include +#include +#include +#include +#include +#include + +static inline void setup_uart(void) +{ + void __iomem *uartbase = (void *)MX6_UART2_BASE_ADDR; + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR; + + writel(0x1, iomuxbase + 0x2b0); + + writel(0x00000000, uartbase + 0x80); + writel(0x00004027, uartbase + 0x84); + writel(0x00000704, uartbase + 0x88); + writel(0x00000a81, uartbase + 0x90); + writel(0x0000002b, uartbase + 0x9c); + writel(0x00013880, uartbase + 0xb0); + writel(0x0000047f, uartbase + 0xa4); + writel(0x0000c34f, uartbase + 0xa8); + writel(0x00000001, uartbase + 0x80); + + putc_ll('>'); +} + +extern char __dtb_imx6q_guf_santaro_start[]; + +ENTRY_FUNCTION(start_imx6q_guf_santaro, r0, r1, r2) +{ + uint32_t fdt; + int i; + + arm_cpu_lowlevel_init(); + + arm_setup_stack(0x00920000 - 8); + + for (i = 0x68; i <= 0x80; i += 4) + writel(0xffffffff, MX6_CCM_BASE_ADDR + i); + + setup_uart(); + + fdt = (uint32_t)__dtb_imx6q_guf_santaro_start - get_runtime_offset(); + + barebox_arm_entry(0x10000000, SZ_1G, fdt); +} diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig index 0f8b3ef..3a1dcc9 100644 --- a/arch/arm/configs/imx_v7_defconfig +++ b/arch/arm/configs/imx_v7_defconfig @@ -7,6 +7,7 @@ CONFIG_MACH_TQMA53=y CONFIG_MACH_FREESCALE_MX53_VMX53=y CONFIG_MACH_PHYTEC_PFLA02=y CONFIG_MACH_DFI_FS700_M60=y +CONFIG_MACH_GUF_SANTARO=y CONFIG_MACH_REALQ7=y CONFIG_MACH_GK802=y CONFIG_MACH_TQMA6X=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 07508e3..3fb4e71 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \ imx6q-mba6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6dl-hummingboard.dtb \ + imx6q-guf-santaro.dtb \ imx6q-nitrogen6x.dtb \ imx6dl-nitrogen6x.dtb dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox.dtb @@ -54,6 +55,7 @@ pbl-$(CONFIG_MACH_SOCFPGA_EBV_SOCRATES) += socfpga_cyclone5_socrates.dtb.o pbl-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o pbl-$(CONFIG_MACH_SOLIDRUN_HUMMINGBOARD) += imx6dl-hummingboard.dtb.o pbl-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o +pbl-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o .SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S diff --git a/arch/arm/dts/imx6q-guf-santaro.dts b/arch/arm/dts/imx6q-guf-santaro.dts new file mode 100644 index 0000000..db93a48 --- /dev/null +++ b/arch/arm/dts/imx6q-guf-santaro.dts @@ -0,0 +1,571 @@ +/* + * Copyright 2014 Sascha Hauer + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http:/*www.opensource.org/licenses/gpl-license.html + * http:/*www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include +#include +#include "imx6q.dtsi" + +/ { + model = "Garz+Fricke i.MX6q Santaro"; + compatible = "guf,imx6q-santaro", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + chosen { + linux,stdout-path = &uart2; + + environment-emmc { + compatible = "barebox,environment"; + device-path = &usdhc2, "partname:barebox-environment"; + }; + }; + + reg_backlight: reg_backlight { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 22 0>; + enable-active-high; + }; + + backlight { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_backlight>; + status = "okay"; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom: m24c64@50 { + compatible = "st,24c32", "at24"; + reg = <0x50>; + }; + + pmic: pf0100@08 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + compatible = "pf0100-regulator"; + reg = <0x08>; + interrupt-parent = <&gpio7>; + interrupts = <13 8>; + + regulators { + reg_vddcore: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_vtt: sw4 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-always-on; + }; + + reg_snvs_3v: vsnvs { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vgen2_1v2_eth: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen4_1v8: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_1v8_eth: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temp@49 { + compatible = "ti,lm73"; + reg = <0x49>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 20 1>; + wake-gpios = <&gpio1 18 0>; + edt,threshold = <30>; + edt,gain = <3>; + edt,offset = <0>; + edt,report-rate = <8>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-santaro { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x80000000 /* ATDETECT */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x80000000 /* EXTPWR */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 /* LED1 */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x80000000 /* CLEAR_ALL */ + MX6QDL_PAD_GPIO_9__WDOG1_B 0x80000000 /* WDT_OUTPUT */ + MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x80000000 /* RTC_INT */ + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x80000000 /* TALERT */ + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x80000000 /* KP5V_OC */ + MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x80000000 /* KP5V_PWR */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x80000000 /* PFO_12V */ + + MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x80000000 /* DIG_IN1 */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x80000000 /* DIG_IN2 */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000 /* DIG_OUT1 */ + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x80000000 /* DIG_OUT2 */ + + MX6QDL_PAD_SD3_DAT3__GPIO7_IO07 0x80000000 /* KP_5V0 */ + >; + }; + + pinctrl_audio: audiogrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x80000000 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x80000000 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x80000000 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x80000000 + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* SGTL500 sys_mclk */ + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x80000000 /* SPEAKER_ON */ + >; + }; + + pinctrl_display: displaygrp { + fsl,pins = < + /* LVDS-GPIO */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* LCD_ENABLE */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* SEL6_8 */ + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x80000000 /* BL-PWM-Out */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x80000000 /* BL-ON */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + /* I2C1 (internal) */ + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + /* I2C3 (HDMI-DCC, ResTOUCH, CTOUCH ) */ + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x80000000 /* CTOUCH_INT2 */ + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000 /* CTOUCH_INT */ + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x80000000 /* CTOUCH_RESET2 */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x80000000 /* CTOUCH_RESET */ + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x80000000 /* ResTOUCH_INT */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + /* CTOUCH */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x80000000 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x80000000 + MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0 0x80000000 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x80000000 + MX6QDL_PAD_EIM_A25__ECSPI2_RDY 0x80000000 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x80000000 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x80000000 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x80000000 + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* CAN/RS485_PWR_EN */ + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 /* RS485_DE */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 /* uC_MDB_WakeUpOut */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x80000000 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x80000000 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x80000000 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x80000000 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x80000000 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x80000000 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x80000000 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x80000000 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x80000000 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x80000000 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x80000000 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x80000000 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x80000000 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x80000000 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 /* REF_CLK (in) */ + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC_INT */ + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + MX6QDL_PAD_GPIO_3__USB_H1_OC 0x80000000 + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USB_HUB_CONNECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* USB_HUB_INT */ + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x80000000 /* USBH2_DATA */ + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x80000000 /* USBH2_STROBE */ + >; + }; + + pinctrl_usboth: usbotggrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x80000000 + MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x80000000 + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x80000000 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC_INT_B */ + >; + }; + + pinctrl_pfid: pfidgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 /* PFID0 */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 /* PFID1 */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* PFID2 */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 /* PFID3 */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 /* PFID4 */ + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 /* PFID5 */ + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* PFID6 */ + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* PFID7 */ + >; + }; + + pinctrl_sram: sramgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0x80000000 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0x80000000 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0x80000000 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0x80000000 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0x80000000 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0x80000000 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0x80000000 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0x80000000 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0x80000000 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0x80000000 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0x80000000 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0x80000000 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0x80000000 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0x80000000 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0x80000000 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0x80000000 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0x80000000 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0x80000000 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0x80000000 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0x80000000 + MX6QDL_PAD_EIM_A19__EIM_ADDR19 0x80000000 + MX6QDL_PAD_EIM_A20__EIM_ADDR20 0x80000000 + MX6QDL_PAD_EIM_D16__EIM_DATA16 0x80000000 + MX6QDL_PAD_EIM_D17__EIM_DATA17 0x80000000 + MX6QDL_PAD_EIM_D18__EIM_DATA18 0x80000000 + MX6QDL_PAD_EIM_D19__EIM_DATA19 0x80000000 + MX6QDL_PAD_EIM_D20__EIM_DATA20 0x80000000 + MX6QDL_PAD_EIM_D21__EIM_DATA21 0x80000000 + MX6QDL_PAD_EIM_D22__EIM_DATA22 0x80000000 + MX6QDL_PAD_EIM_D23__EIM_DATA23 0x80000000 + MX6QDL_PAD_EIM_D24__EIM_DATA24 0x80000000 + MX6QDL_PAD_EIM_D25__EIM_DATA25 0x80000000 + MX6QDL_PAD_EIM_D26__EIM_DATA26 0x80000000 + MX6QDL_PAD_EIM_D27__EIM_DATA27 0x80000000 + MX6QDL_PAD_EIM_D28__EIM_DATA28 0x80000000 + MX6QDL_PAD_EIM_D29__EIM_DATA29 0x80000000 + MX6QDL_PAD_EIM_D30__EIM_DATA30 0x80000000 + MX6QDL_PAD_EIM_D31__EIM_DATA31 0x80000000 + >; + }; + }; +}; + +&ldb { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_display>; + + lvds-channel@0 { + status = "okay"; + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; + + display-timings { + timing0: 800x480 { + clock-frequency = <35338240>; + hactive = <800>; + vactive = <480>; + hfront-porch = <100>; + hback-porch = <100>; + hsync-len = <24>; + hsync-active = <1>; + vfront-porch = <5>; + vback-porch = <5>; + vsync-len = <3>; + vsync-active = <1>; + }; + }; + }; +}; + +&uart1 { + /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* RS232 debug port */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + /* TTL internal */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + /* RS232 MDB */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + /* SD card socket */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox-environment"; + reg = <0x80000 0x80000>; + }; +}; + +&usdhc4 { + /* eMMC */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5933f81..4346a80 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -207,6 +207,10 @@ config MACH_DFI_FS700_M60 bool "DFI i.MX6 FS700 M60 Q7 Board" select ARCH_IMX6 +config MACH_GUF_SANTARO + bool "Garz+Fricke Santaro Board" + select ARCH_IMX6 + config MACH_REALQ7 bool "DataModul i.MX6Q Real Qseven Board" select ARCH_IMX6 diff --git a/images/Makefile.imx b/images/Makefile.imx index 9aca871..d1a29a0 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -57,6 +57,11 @@ CFG_start_imx6_realq7.pblx.imximg = $(board)/datamodul-edm-qmx6/flash-header.imx FILE_barebox-datamodul-edm-qmx6.img = start_imx6_realq7.pblx.imximg image-$(CONFIG_MACH_REALQ7) += barebox-datamodul-edm-qmx6.img +pblx-$(CONFIG_MACH_GUF_SANTARO) += start_imx6q_guf_santaro +CFG_start_imx6q_guf_santaro.pblx.imximg = $(board)/guf-santaro/flash-header.imxcfg +FILE_barebox-guf-santaro.img = start_imx6q_guf_santaro.pblx.imximg +image-$(CONFIG_MACH_GUF_SANTARO) += barebox-guf-santaro.img + pblx-$(CONFIG_MACH_GK802) += start_imx6_gk802 CFG_start_imx6_gk802.pblx.imximg = $(board)/gk802/flash-header.imxcfg FILE_barebox-gk802.img = start_imx6_gk802.pblx.imximg -- 1.8.5.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox