From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/4] mtd: ubi: rework logging
Date: Fri, 28 Feb 2014 11:24:20 +0100 [thread overview]
Message-ID: <1393583061-796-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1393583061-796-1-git-send-email-s.hauer@pengutronix.de>
By default UBI is very verbose. Decrease the verbosity, turn
printf messages into ubi_ messages and add device parameters
for the values which are not printed anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/mtd/ubi/build.c | 30 +++++++++++++++++++++---------
drivers/mtd/ubi/cdev.c | 18 +++++++++---------
drivers/mtd/ubi/fastmap.c | 4 ++--
drivers/mtd/ubi/ubi.h | 1 +
4 files changed, 33 insertions(+), 20 deletions(-)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 202b046..093f703 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -578,8 +578,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
ubi->fm_disabled = 1;
}
- ubi_msg("default fastmap pool size: %d", ubi->fm_pool.max_size);
- ubi_msg("default fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+ ubi_debug("default fastmap pool size: %d", ubi->fm_pool.max_size);
+ ubi_debug("default fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
#else
ubi->fm_disabled = 1;
#endif
@@ -619,23 +619,35 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
ubi_msg("attached mtd%d (name \"%s\", size %llu MiB) to ubi%d",
mtd->index, mtd->name, ubi->flash_size >> 20, ubi_num);
- ubi_msg("PEB size: %d bytes (%d KiB), LEB size: %d bytes",
+ ubi_debug("PEB size: %d bytes (%d KiB), LEB size: %d bytes",
ubi->peb_size, ubi->peb_size >> 10, ubi->leb_size);
- ubi_msg("min./max. I/O unit sizes: %d/%d, sub-page size %d",
+ ubi_debug("min./max. I/O unit sizes: %d/%d, sub-page size %d",
ubi->min_io_size, ubi->max_write_size, ubi->hdrs_min_io_size);
- ubi_msg("VID header offset: %d (aligned %d), data offset: %d",
+ ubi_debug("VID header offset: %d (aligned %d), data offset: %d",
ubi->vid_hdr_offset, ubi->vid_hdr_aloffset, ubi->leb_start);
- ubi_msg("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d",
+ ubi_debug("good PEBs: %d, bad PEBs: %d, corrupted PEBs: %d",
ubi->good_peb_count, ubi->bad_peb_count, ubi->corr_peb_count);
- ubi_msg("user volume: %d, internal volumes: %d, max. volumes count: %d",
+ ubi_debug("user volume: %d, internal volumes: %d, max. volumes count: %d",
ubi->vol_count - UBI_INT_VOL_COUNT, UBI_INT_VOL_COUNT,
ubi->vtbl_slots);
- ubi_msg("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u",
+ ubi_debug("max/mean erase counter: %d/%d, WL threshold: %d, image sequence number: %u",
ubi->max_ec, ubi->mean_ec, CONFIG_MTD_UBI_WL_THRESHOLD,
ubi->image_seq);
- ubi_msg("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d",
+ ubi_debug("available PEBs: %d, total reserved PEBs: %d, PEBs reserved for bad PEB handling: %d",
ubi->avail_pebs, ubi->rsvd_pebs, ubi->beb_rsvd_pebs);
+ dev_add_param_int_ro(&ubi->dev, "peb_size", ubi->peb_size, "%d");
+ dev_add_param_int_ro(&ubi->dev, "leb_size", ubi->leb_size, "%d");
+ dev_add_param_int_ro(&ubi->dev, "vid_header_offset", ubi->vid_hdr_offset, "%d");
+ dev_add_param_int_ro(&ubi->dev, "min_io_size", ubi->min_io_size, "%d");
+ dev_add_param_int_ro(&ubi->dev, "sub_page_size", ubi->hdrs_min_io_size, "%d");
+ dev_add_param_int_ro(&ubi->dev, "good_peb_count", ubi->good_peb_count, "%d");
+ dev_add_param_int_ro(&ubi->dev, "bad_peb_count", ubi->bad_peb_count, "%d");
+ dev_add_param_int_ro(&ubi->dev, "max_erase_counter", ubi->max_ec, "%d");
+ dev_add_param_int_ro(&ubi->dev, "mean_erase_counter", ubi->mean_ec, "%d");
+ dev_add_param_int_ro(&ubi->dev, "available_pebs", ubi->avail_pebs, "%d");
+ dev_add_param_int_ro(&ubi->dev, "reserved_pebs", ubi->rsvd_pebs, "%d");
+
/*
* The below lock makes sure we do not race with 'ubi_thread()' which
* checks @ubi->thread_enabled. Otherwise we may fail to wake it up.
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index 129f2e2..d64e6cf 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -25,7 +25,7 @@ static ssize_t ubi_volume_cdev_read(struct cdev *cdev, void *buf, size_t size,
loff_t offp = offset;
int usable_leb_size = vol->usable_leb_size;
- debug("%s: %zd @ 0x%08llx\n", __func__, size, offset);
+ ubi_debug("%s: %zd @ 0x%08llx\n", __func__, size, offset);
len = size > usable_leb_size ? usable_leb_size : size;
@@ -38,7 +38,7 @@ static ssize_t ubi_volume_cdev_read(struct cdev *cdev, void *buf, size_t size,
err = ubi_eba_read_leb(ubi, vol, lnum, buf, off, len, 0);
if (err) {
- printf("read err %x\n", err);
+ ubi_err("read error: %s\n", strerror(-err));
break;
}
off += len;
@@ -68,14 +68,14 @@ static ssize_t ubi_volume_cdev_write(struct cdev* cdev, const void *buf,
if (!priv->written) {
err = ubi_start_update(ubi, vol, vol->used_bytes);
if (err < 0) {
- printf("Cannot start volume update\n");
+ ubi_err("Cannot start volume update\n");
return err;
}
}
err = ubi_more_update_data(ubi, vol, buf, size);
if (err < 0) {
- printf("Couldnt or partially wrote data \n");
+ ubi_err("Couldnt or partially wrote data \n");
return err;
}
@@ -117,7 +117,7 @@ static int ubi_volume_cdev_close(struct cdev *cdev)
kfree(buf);
if (err < 0) {
- printf("Couldnt or partially wrote data \n");
+ ubi_err("Couldnt or partially wrote data \n");
return err;
}
}
@@ -128,7 +128,7 @@ static int ubi_volume_cdev_close(struct cdev *cdev)
err = ubi_check_volume(ubi, vol->vol_id);
if (err < 0) {
- printf("check failed: %s\n", strerror(err));
+ ubi_err("ubi volume check failed: %s\n", strerror(err));
return err;
}
@@ -179,7 +179,7 @@ int ubi_volume_cdev_add(struct ubi_device *ubi, struct ubi_volume *vol)
cdev->name = asprintf("ubi%d.%s", ubi->ubi_num, vol->name);
cdev->priv = priv;
cdev->size = vol->used_bytes;
- printf("registering %s as /dev/%s\n", vol->name, cdev->name);
+ ubi_msg("registering %s as /dev/%s\n", vol->name, cdev->name);
ret = devfs_create(cdev);
if (ret) {
kfree(priv);
@@ -241,7 +241,7 @@ int ubi_cdev_add(struct ubi_device *ubi)
cdev->priv = ubi;
cdev->size = 0;
- printf("registering /dev/%s\n", cdev->name);
+ ubi_msg("registering /dev/%s", cdev->name);
ret = devfs_create(cdev);
if (ret)
kfree(cdev->name);
@@ -253,7 +253,7 @@ void ubi_cdev_remove(struct ubi_device *ubi)
{
struct cdev *cdev = &ubi->cdev;
- printf("removing %s\n", cdev->name);
+ ubi_msg("removing %s", cdev->name);
devfs_remove(cdev);
kfree(cdev->name);
diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
index 1ba1571..de68c32 100644
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -1054,8 +1054,8 @@ int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
ubi->fm_pool.max_size = ubi->fm->max_pool_size;
ubi->fm_wl_pool.max_size = ubi->fm->max_wl_pool_size;
ubi_msg("attached by fastmap");
- ubi_msg("fastmap pool size: %d", ubi->fm_pool.max_size);
- ubi_msg("fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
+ ubi_debug("fastmap pool size: %d", ubi->fm_pool.max_size);
+ ubi_debug("fastmap WL pool size: %d", ubi->fm_wl_pool.max_size);
ubi->fm_disabled = 0;
ubi_free_vid_hdr(ubi, vh);
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index aa2cf02..a3bb704 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -39,6 +39,7 @@
/* UBI name used for character devices, sysfs, etc */
#define UBI_NAME_STR "ubi"
+#define ubi_debug(fmt, ...) pr_debug("UBI: " fmt "\n", ##__VA_ARGS__)
/* Normal UBI messages */
#define ubi_msg(fmt, ...) pr_info("UBI: " fmt "\n", ##__VA_ARGS__)
/* UBI warning messages */
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-02-28 10:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 10:24 [PATCH 1/4] param: dev_add_param_fixed: constify argument Sascha Hauer
2014-02-28 10:24 ` [PATCH 2/4] fs: ubifs: Fix unused function warning Sascha Hauer
2014-02-28 10:24 ` Sascha Hauer [this message]
2014-02-28 10:24 ` [PATCH 4/4] fs: ubifs: rework logging Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393583061-796-3-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox