mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Philippe Rétornaz" <philippe.retornaz@epfl.ch>
To: s.hauer@pengutronix.de
Cc: barebox@lists.infradead.org,
	"Philippe Rétornaz" <philippe.retornaz@epfl.ch>
Subject: [PATCH 1/1 v2] ARM: i.MX31: Add support for mx31moboard board
Date: Fri, 28 Feb 2014 17:27:59 +0100	[thread overview]
Message-ID: <1393604879-29317-2-git-send-email-philippe.retornaz@epfl.ch> (raw)
In-Reply-To: <1393604879-29317-1-git-send-email-philippe.retornaz@epfl.ch>

The mx31moboard is used on the marXbot, Eyebot and Footbot robot.

Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
---
 arch/arm/boards/Makefile                          |    1 +
 arch/arm/boards/mx31moboard/Makefile              |   20 ++
 arch/arm/boards/mx31moboard/env/boot/nor          |    9 +
 arch/arm/boards/mx31moboard/env/boot/sd           |    8 +
 arch/arm/boards/mx31moboard/env/boot/usbmsd       |    8 +
 arch/arm/boards/mx31moboard/env/config-board      |    7 +
 arch/arm/boards/mx31moboard/env/init/mtdparts-nor |   11 +
 arch/arm/boards/mx31moboard/lowlevel.c            |  114 +++++++++
 arch/arm/boards/mx31moboard/mx31moboard.c         |  259 +++++++++++++++++++++
 arch/arm/boards/mx31moboard/mx31moboard.dox       |   10 +
 arch/arm/mach-imx/Kconfig                         |   11 +
 11 files changed, 458 insertions(+)
 create mode 100644 arch/arm/boards/mx31moboard/Makefile
 create mode 100644 arch/arm/boards/mx31moboard/env/boot/nor
 create mode 100644 arch/arm/boards/mx31moboard/env/boot/sd
 create mode 100644 arch/arm/boards/mx31moboard/env/boot/usbmsd
 create mode 100644 arch/arm/boards/mx31moboard/env/config-board
 create mode 100644 arch/arm/boards/mx31moboard/env/init/mtdparts-nor
 create mode 100644 arch/arm/boards/mx31moboard/lowlevel.c
 create mode 100644 arch/arm/boards/mx31moboard/mx31moboard.c
 create mode 100644 arch/arm/boards/mx31moboard/mx31moboard.dox

diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index ffd6bb3..0d8c9cf 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_MACH_MIOA701)			+= mioa701/
 obj-$(CONFIG_MACH_MMCCPU)			+= mmccpu/
 obj-$(CONFIG_MACH_MX23EVK)			+= freescale-mx23-evk/
 obj-$(CONFIG_MACH_MX28EVK)			+= freescale-mx28-evk/
+obj-$(CONFIG_MACH_MX31MOBOARD)			+= mx31moboard/
 obj-$(CONFIG_MACH_MX6Q_ARM2)			+= freescale-mx6-arm2/
 obj-$(CONFIG_MACH_NESO)				+= guf-neso/
 obj-$(CONFIG_MACH_NOMADIK_8815NHK)		+= nhk8815/
diff --git a/arch/arm/boards/mx31moboard/Makefile b/arch/arm/boards/mx31moboard/Makefile
new file mode 100644
index 0000000..83a6016
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/Makefile
@@ -0,0 +1,20 @@
+#
+# (C) Copyright 2007 Juergen Beisert <jbe@pengutronix.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+#
+
+lwl-y += lowlevel.o
+obj-y += mx31moboard.o
diff --git a/arch/arm/boards/mx31moboard/env/boot/nor b/arch/arm/boards/mx31moboard/env/boot/nor
new file mode 100644
index 0000000..e36655c
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/nor
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+        boot-menu-add-entry "$0" "NOR Flash"
+        exit
+fi
+
+global.bootm.image="/dev/nor0.kernel"
+global.linux.bootargs.dyn.root="root=/dev/mtdblock3 ro"
diff --git a/arch/arm/boards/mx31moboard/env/boot/sd b/arch/arm/boards/mx31moboard/env/boot/sd
new file mode 100644
index 0000000..16e734d
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/sd
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+        boot-menu-add-entry "$0" "SD Boot"
+        exit
+fi
+
+boot mci0
diff --git a/arch/arm/boards/mx31moboard/env/boot/usbmsd b/arch/arm/boards/mx31moboard/env/boot/usbmsd
new file mode 100644
index 0000000..6a16d3e
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/boot/usbmsd
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+        boot-menu-add-entry "$0" "USB Boot"
+        exit
+fi
+
+boot ehci0
diff --git a/arch/arm/boards/mx31moboard/env/config-board b/arch/arm/boards/mx31moboard/env/config-board
new file mode 100644
index 0000000..f67b333
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/config-board
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# board defaults, do not change in running system. Change /env/config
+# instead
+
+global.boot.default="usbmsd sd nor"
+global.linux.bootargs.base="console=ttymxc0,921600"
diff --git a/arch/arm/boards/mx31moboard/env/init/mtdparts-nor b/arch/arm/boards/mx31moboard/env/init/mtdparts-nor
new file mode 100644
index 0000000..f09a9cc
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/env/init/mtdparts-nor
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+if [ "$1" = menu ]; then
+	init-menu-add-entry "$0" "NOR partitions"
+	exit
+fi
+
+mtdparts="512k(nor0.barebox)ro,256k(nor0.bareboxenv),4M(nor0.kernel),-(nor0.root)"
+kernelname="physmap-flash.0"
+
+mtdparts-add -d nor0 -k ${kernelname} -p ${mtdparts}
diff --git a/arch/arm/boards/mx31moboard/lowlevel.c b/arch/arm/boards/mx31moboard/lowlevel.c
new file mode 100644
index 0000000..e9ffb74
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/lowlevel.c
@@ -0,0 +1,114 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * (c) 2014 EPFL, Philippe Rétornaz <philippe.retornaz@epfl.ch>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <asm/barebox-arm.h>
+#include <asm/system.h>
+#include <asm-generic/memory_layout.h>
+#include <asm-generic/sections.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/imx31-regs.h>
+#include <mach/imx-pll.h>
+#include <asm/barebox-arm-head.h>
+#include <mach/esdctl.h>
+
+static noinline __noreturn void mx31moboard_startup(void)
+{
+	uint32_t r;
+	volatile int c;
+
+	/* Enable IPU Display interface */
+	writel(1 << 6, MX31_IPU_CTRL_BASE_ADDR);
+
+	writel(0x074B0BF5, MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
+
+	for (c = 0; c < 0x4000; c++) ;
+
+	writel(0x074B0BF5 | MX31_CCMR_MPE, MX31_CCM_BASE_ADDR +
+			MX31_CCM_CCMR);
+	writel((0x074B0BF5 | MX31_CCMR_MPE) & ~MX31_CCMR_MDS,
+			MX31_CCM_BASE_ADDR + MX31_CCM_CCMR);
+
+	writel(MX31_PDR0_CSI_PODF(0x1ff) | \
+		MX31_PDR0_PER_PODF(7) | \
+		MX31_PDR0_HSP_PODF(3) | \
+		MX31_PDR0_NFC_PODF(5) | \
+		MX31_PDR0_IPG_PODF(1) | \
+		MX31_PDR0_MAX_PODF(3) | \
+		MX31_PDR0_MCU_PODF(0), \
+		MX31_CCM_BASE_ADDR + MX31_CCM_PDR0);
+
+	writel(IMX_PLL_PD(0) | IMX_PLL_MFD(0x33) |
+			IMX_PLL_MFI(0xa) | IMX_PLL_MFN(0x0C),
+			MX31_CCM_BASE_ADDR + MX31_CCM_MPCTL);
+	writel(IMX_PLL_PD(1) | IMX_PLL_MFD(0x43) | IMX_PLL_MFI(12) |
+			IMX_PLL_MFN(1), MX31_CCM_BASE_ADDR +
+			MX31_CCM_SPCTL);
+
+	/*
+	 * Configure IOMUXC
+	 * Clears 0x43fa_c26c - 0x43fa_c2dc with 0,
+	 * except 0x43fa_c278 (untouched), 0x43fa_c27c (set to 0x1000)
+	 * and 0x43fa_c280 (untouched)
+	 * (behaviour copied by sha, source unknown)
+	 */
+	writel(0, 0x43fac26c); /* SDCLK */
+	writel(0, 0x43fac270); /* CAS */
+	writel(0, 0x43fac274); /* RAS */
+
+	writel(0x1000, 0x43fac27c); /* CSD0 */
+
+	/* DQM3, DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 */
+	for (r = 0x43fac284; r <= 0x43fac2dc; r += 4)
+		writel(0, r);
+
+	/* Skip SDRAM initialization if we run from RAM */
+	r = get_pc();
+	if (r > 0x80000000 && r < 0xa0000000)
+		imx31_barebox_entry(0);
+
+	writel(0x00000004, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
+	writel(0x00695727, MX31_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
+	writel(0x92100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+	writel(0x12344321, MX31_CSD0_BASE_ADDR + 0xf00);
+	writel(0xa2100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+	writel(0x12344321, MX31_CSD0_BASE_ADDR);
+	writel(0x12344321, MX31_CSD0_BASE_ADDR);
+	writel(0xb2100000, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+	writeb(0xda, MX31_CSD0_BASE_ADDR + 0x33);
+	writeb(0xff, MX31_CSD0_BASE_ADDR + 0x01000000);
+	writel(0x82226080, MX31_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
+	writel(0xDEADBEEF, MX31_CSD0_BASE_ADDR);
+	writel(0x0000000c, MX31_ESDCTL_BASE_ADDR + IMX_ESDMISC);
+
+	imx31_barebox_entry(0);
+
+}
+
+void __bare_init __naked barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+
+	/* Temporary stack location in internal SRAM */
+	arm_setup_stack(MX31_IRAM_BASE_ADDR + MX31_IRAM_SIZE - 8);
+
+	mx31moboard_startup();
+}
diff --git a/arch/arm/boards/mx31moboard/mx31moboard.c b/arch/arm/boards/mx31moboard/mx31moboard.c
new file mode 100644
index 0000000..2ec1f4f
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/mx31moboard.c
@@ -0,0 +1,259 @@
+/*
+ * (C) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * (C) 2014 EPFL, Philippe Rétornaz <philippe.retornaz@epfl.ch>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * Board support for EPFL's, i.MX31 based CPU card
+ *
+ * Based on:
+ * Board support for Phytec's, i.MX31 based CPU card, called: PCM037
+ */
+
+#include <common.h>
+#include <init.h>
+#include <driver.h>
+#include <fs.h>
+#include <gpio.h>
+#include <led.h>
+#include <environment.h>
+#include <usb/ulpi.h>
+#include <mach/imx31-regs.h>
+#include <mach/iomux-mx31.h>
+#include <asm/armlinux.h>
+#include <asm/sections.h>
+#include <mach/weim.h>
+#include <io.h>
+#include <asm/mmu.h>
+#include <partition.h>
+#include <generated/mach-types.h>
+#include <asm/barebox-arm.h>
+#include <mach/devices-imx31.h>
+
+#define USBH2_EN_B	IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void mx31moboard_usb_init(void)
+{
+	u32 tmp;
+
+	if (!IS_ENABLED(CONFIG_USB))
+		return;
+
+	/* enable clock */
+	tmp = readl(0x53f80000);
+	tmp |= (1 << 9);
+	writel(tmp, 0x53f80000);
+
+	/* Host 2 */
+	tmp = readl(MX31_IOMUXC_GPR);
+	tmp |= 1 << 11;	/* IOMUX GPR: enable USBH2 signals */
+	writel(tmp, MX31_IOMUXC_GPR);
+
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC));
+	imx_iomux_mode(IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC));
+
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+			| PAD_CTL_ODE_CMOS)
+	imx_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG | PAD_CTL_100K_PU);
+	imx_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG | PAD_CTL_100K_PU);
+	imx_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG | PAD_CTL_100K_PU);
+	imx_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG | PAD_CTL_100K_PU);
+	imx_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+	imx_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+	imx_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
+	imx_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
+	imx_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
+	imx_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
+	imx_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
+	imx_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
+
+
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(5);
+	gpio_set_value(USB_RESET_B, 1);
+	mdelay(10);
+
+	gpio_request(USBH2_EN_B, "usbh2-en");
+	gpio_direction_output(USBH2_EN_B, 0);
+	udelay(900);
+	gpio_set_value(USBH2_EN_B, 1);
+	udelay(200);
+
+	tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x600);
+	tmp &= ~((3 << 21) | 1);
+	tmp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
+	writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x600);
+
+	tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x584);
+	tmp &= ~(3 << 30);
+	tmp |= 2 << 30;
+	writel(tmp, MX31_USB_OTG_BASE_ADDR + 0x584);
+
+	gpio_set_value(USBH2_EN_B, 0);
+
+	mdelay(50);
+
+	ulpi_setup((void *)(MX31_USB_OTG_BASE_ADDR + 0x570), 1);
+
+	/* Set to Host mode */
+	tmp = readl(MX31_USB_OTG_BASE_ADDR + 0x1a8);
+	writel(tmp | 0x3, MX31_USB_OTG_BASE_ADDR + 0x1a8);
+
+}
+
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.led = {
+			.name = "coreboard-led-0:red:running"
+		},
+		.gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.led = {
+			.name   = "coreboard-led-1:red",
+		},
+		.gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.led = {
+			.name   = "coreboard-led-2:red",
+		},
+		.gpio   = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.led = {
+			.name   = "coreboard-led-3:red",
+		},
+		.gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static void mx31moboard_add_leds(void)
+{
+	int i;
+
+	if (!IS_ENABLED(CONFIG_LED_GPIO))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(mx31moboard_leds); i++) {
+		led_gpio_register(&mx31moboard_leds[i]);
+		led_set(&mx31moboard_leds[i].led, 0);
+	}
+
+	led_set_trigger(LED_TRIGGER_HEARTBEAT, &mx31moboard_leds[0].led);
+}
+
+static int mx31moboard_mmu_init(void)
+{
+	l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
+
+	return 0;
+}
+postmmu_initcall(mx31moboard_mmu_init);
+
+static const struct devfs_partition mx31moboard_nor0_partitions[] = {
+	{
+		.offset = 0,
+		.size = SZ_512K,
+		.flags = DEVFS_PARTITION_FIXED,
+		.name = "self0",
+	}, {
+		.offset = DEVFS_PARTITION_APPEND,
+		.size = SZ_256K,
+		.name = "env0",
+	}, {
+		/* Sentinel */
+	}
+};
+
+static int mx31moboard_devices_init(void)
+{
+	/* CS0: Nor Flash */
+	imx31_setup_weimcs(0, 0x0000CC03, 0xa0330D01, 0x00220800);
+
+	/*
+	 * Up to 32MiB NOR type flash, connected to
+	 * CS line 0, data width is 16 bit
+	 */
+	add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX31_CS0_BASE_ADDR, SZ_32M, 0);
+
+	imx31_add_mmc0(NULL);
+
+	/*
+	 * Create partitions that should be
+	 * not touched by any regular user
+	 */
+	devfs_create_partitions("nor0", mx31moboard_nor0_partitions);
+	protect_file("/dev/env0", 1);
+
+	mx31moboard_usb_init();
+	add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC,
+					MX31_USB_HS2_BASE_ADDR, NULL);
+
+	mx31moboard_add_leds();
+
+	armlinux_set_architecture(MACH_TYPE_MX31MOBOARD);
+
+	return 0;
+}
+
+device_initcall(mx31moboard_devices_init);
+
+static unsigned int mx31moboard_iomux[] = {
+	/* UART1 */
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_CTS1__GPIO2_7,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* LEDS */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+};
+
+static int imx31_console_init(void)
+{
+	imx_iomux_setup_multiple_pins(mx31moboard_iomux,
+					ARRAY_SIZE(mx31moboard_iomux));
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+
+	barebox_set_model("EPFL mx31moboard");
+	barebox_set_hostname("mx31moboard");
+
+	imx31_add_uart0();
+
+	return 0;
+}
+
+console_initcall(imx31_console_init);
diff --git a/arch/arm/boards/mx31moboard/mx31moboard.dox b/arch/arm/boards/mx31moboard/mx31moboard.dox
new file mode 100644
index 0000000..41c8bbb
--- /dev/null
+++ b/arch/arm/boards/mx31moboard/mx31moboard.dox
@@ -0,0 +1,10 @@
+/** @page mx31moboard EPFL mx31moboard
+
+This CPU card is based on a Freescale i.MX31 CPU. The card is shipped with:
+
+- 32MiB NOR type Flash Memory
+- 128MiB LPDDR
+- A least one SD slot
+- A least one USB host (H2)
+
+*/
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 79ea694..b7e7533 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -14,6 +14,7 @@ config ARCH_TEXT_BASE
 	default 0xa7f00000 if MACH_PCA100
 	default 0xa0000000 if MACH_PCM038
 	default 0x87f00000 if MACH_PCM037
+	default 0x87f00000 if MACH_MX31MOBOARD
 	default 0x87f00000 if MACH_PCM043
 	default 0x08f80000 if MACH_SCB9328
 	default 0xa7e00000 if MACH_NESO
@@ -363,6 +364,16 @@ config MACH_PCM037
 	  Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
 	  with a Freescale i.MX31 Processor
 
+config MACH_MX31MOBOARD
+	bool "mx31moboard-i.MX31"
+	select ARCH_IMX31
+	select USB_ULPI if USB
+	select HAVE_DEFAULT_ENVIRONMENT_NEW
+	select ARCH_HAS_L2X0
+	help
+	  Say Y here if you are using EPFL mx31moboard board equipped
+	  with a Freescale i.MX31 Processor
+
 # ----------------------------------------------------------
 
 comment "i.MX35 Boards"
-- 
1.7.9.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-02-28 16:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-28 16:27 [PATCH 0/1 v2] Add support for mx31moboard Philippe Rétornaz
2014-02-28 16:27 ` Philippe Rétornaz [this message]
2014-02-28 16:35   ` [PATCH 1/1 v2] ARM: i.MX31: Add support for mx31moboard board Alexander Shiyan
2014-03-03  7:02     ` Sascha Hauer
2014-03-03  8:09   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393604879-29317-2-git-send-email-philippe.retornaz@epfl.ch \
    --to=philippe.retornaz@epfl.ch \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox