From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from exprod5og119.obsmtp.com ([64.18.0.189]) by merlin.infradead.org with smtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WOA5n-0001bD-AQ for barebox@lists.infradead.org; Thu, 13 Mar 2014 18:11:01 +0000 From: Renaud Barbier Date: Thu, 13 Mar 2014 18:09:59 +0000 Message-Id: <1394734204-8181-3-git-send-email-renaud.barbier@ge.com> In-Reply-To: <1394734204-8181-1-git-send-email-renaud.barbier@ge.com> References: <1394734204-8181-1-git-send-email-renaud.barbier@ge.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/6] common: DDR3 SPD verification support To: barebox@lists.infradead.org Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver. This is based on the equivalent files from U-Boot version git-be937b5. Signed-off-by: Renaud Barbier --- common/ddr_spd.c | 24 +++++++++++ include/ddr_spd.h | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+) diff --git a/common/ddr_spd.c b/common/ddr_spd.c index c8b73ff..ea0b529 100644 --- a/common/ddr_spd.c +++ b/common/ddr_spd.c @@ -7,6 +7,7 @@ */ #include +#include #include uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd) @@ -37,3 +38,26 @@ uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd) error: return 1; } + +uint32_t ddr3_spd_checksum_pass(const struct ddr3_spd_eeprom_s *spd) +{ + char crc_lsb, crc_msb; + int csum16, len; + + /* + * SPD byte0[7] - CRC coverage + * 0 = CRC covers bytes 0~125 + * 1 = CRC covers bytes 0~116 + */ + + len = !(spd->info_size_crc & 0x80) ? 126 : 117; + csum16 = cyg_crc16((char *)spd, len); + + crc_lsb = (char) (csum16 & 0xff); + crc_msb = (char) (csum16 >> 8); + + if (spd->crc[0] != crc_lsb || spd->crc[1] != crc_msb) + return 1; + + return 0; +} diff --git a/include/ddr_spd.h b/include/ddr_spd.h index c8762a2..fc03bac 100644 --- a/include/ddr_spd.h +++ b/include/ddr_spd.h @@ -114,13 +114,126 @@ struct ddr2_spd_eeprom_s { uint8_t mdate[2]; /* 93 Manufacturing Date */ uint8_t sernum[4]; /* 95 Assembly Serial Number */ uint8_t mspec[27]; /* 99-127 Manufacturer Specific Data */ +}; + +struct ddr3_spd_eeprom_s { + /* General Section: Bytes 0-59 */ + uint8_t info_size_crc; /* 0 # bytes written into serial memory, + CRC coverage */ + uint8_t spd_rev; /* 1 Total # bytes of SPD mem device */ + uint8_t mem_type; /* 2 Key Byte / Fundamental mem type */ + uint8_t module_type; /* 3 Key Byte / Module Type */ + uint8_t density_banks; /* 4 SDRAM Density and Banks */ + uint8_t addressing; /* 5 SDRAM Addressing */ + uint8_t module_vdd; /* 6 Module nominal voltage, VDD */ + uint8_t organization; /* 7 Module Organization */ + uint8_t bus_width; /* 8 Module Memory Bus Width */ + uint8_t ftb_div; /* 9 Fine Timebase (FTB) + Dividend / Divisor */ + uint8_t mtb_dividend; /* 10 Medium Timebase (MTB) Dividend */ + uint8_t mtb_divisor; /* 11 Medium Timebase (MTB) Divisor */ + uint8_t tck_min; /* 12 SDRAM Minimum Cycle Time */ + uint8_t res_13; /* 13 Reserved */ + uint8_t caslat_lsb; /* 14 CAS Latencies Supported, + Least Significant Byte */ + uint8_t caslat_msb; /* 15 CAS Latencies Supported, + Most Significant Byte */ + uint8_t taa_min; /* 16 Min CAS Latency Time */ + uint8_t twr_min; /* 17 Min Write REcovery Time */ + uint8_t trcd_min; /* 18 Min RAS# to CAS# Delay Time */ + uint8_t trrd_min; /* 19 Min Row Active to + Row Active Delay Time */ + uint8_t trp_min; /* 20 Min Row Precharge Delay Time */ + uint8_t tras_trc_ext; /* 21 Upper Nibbles for tRAS and tRC */ + uint8_t tras_min_lsb; /* 22 Min Active to Precharge + Delay Time */ + uint8_t trc_min_lsb; /* 23 Min Active to Active/Refresh + Delay Time, LSB */ + uint8_t trfc_min_lsb; /* 24 Min Refresh Recovery Delay Time */ + uint8_t trfc_min_msb; /* 25 Min Refresh Recovery Delay Time */ + uint8_t twtr_min; /* 26 Min Internal Write to + Read Command Delay Time */ + uint8_t trtp_min; /* 27 Min Internal Read to Precharge + Command Delay Time */ + uint8_t tfaw_msb; /* 28 Upper Nibble for tFAW */ + uint8_t tfaw_min; /* 29 Min Four Activate Window + Delay Time*/ + uint8_t opt_features; /* 30 SDRAM Optional Features */ + uint8_t therm_ref_opt; /* 31 SDRAM Thermal and Refresh Opts */ + uint8_t therm_sensor; /* 32 Module Thermal Sensor */ + uint8_t device_type; /* 33 SDRAM device type */ + int8_t fine_tck_min; /* 34 Fine offset for tCKmin */ + int8_t fine_taa_min; /* 35 Fine offset for tAAmin */ + int8_t fine_trcd_min; /* 36 Fine offset for tRCDmin */ + int8_t fine_trp_min; /* 37 Fine offset for tRPmin */ + int8_t fine_trc_min; /* 38 Fine offset for tRCmin */ + uint8_t res_39_59[21]; /* 39-59 Reserved, General Section */ + + /* Module-Specific Section: Bytes 60-116 */ + union { + struct { + /* 60 (Unbuffered) Module Nominal Height */ + uint8_t mod_height; + /* 61 (Unbuffered) Module Maximum Thickness */ + uint8_t mod_thickness; + /* 62 (Unbuffered) Reference Raw Card Used */ + uint8_t ref_raw_card; + /* 63 (Unbuffered) Address Mapping from + Edge Connector to DRAM */ + uint8_t addr_mapping; + /* 64-116 (Unbuffered) Reserved */ + uint8_t res_64_116[53]; + } unbuffered; + struct { + /* 60 (Registered) Module Nominal Height */ + uint8_t mod_height; + /* 61 (Registered) Module Maximum Thickness */ + uint8_t mod_thickness; + /* 62 (Registered) Reference Raw Card Used */ + uint8_t ref_raw_card; + /* 63 DIMM Module Attributes */ + uint8_t modu_attr; + /* 64 RDIMM Thermal Heat Spreader Solution */ + uint8_t thermal; + /* 65 Register Manufacturer ID Code, LSB */ + uint8_t reg_id_lo; + /* 66 Register Manufacturer ID Code, MSB */ + uint8_t reg_id_hi; + /* 67 Register Revision Number */ + uint8_t reg_rev; + /* 68 Register Type */ + uint8_t reg_type; + /* 69-76 RC1,3,5..15 (MS Nib.)/RC0,2,4..14 (LS Nib.) */ + uint8_t rcw[8]; + } registered; + uint8_t uc[57]; /* 60-116 Module-Specific Section */ + } mod_section; + + /* Unique Module ID: Bytes 117-125 */ + uint8_t mmid_lsb; /* 117 Module MfgID Code LSB - JEP-106 */ + uint8_t mmid_msb; /* 118 Module MfgID Code MSB - JEP-106 */ + uint8_t mloc; /* 119 Mfg Location */ + uint8_t mdate[2]; /* 120-121 Mfg Date */ + uint8_t sernum[4]; /* 122-125 Module Serial Number */ + + /* CRC: Bytes 126-127 */ + uint8_t crc[2]; /* 126-127 SPD CRC */ + /* Other Manufacturer Fields and User Space: Bytes 128-255 */ + uint8_t mpart[18]; /* 128-145 Mfg's Module Part Number */ + uint8_t mrev[2]; /* 146-147 Module Revision Code */ + uint8_t dmid_lsb; /* 148 DRAM MfgID Code LSB - JEP-106 */ + uint8_t dmid_msb; /* 149 DRAM MfgID Code MSB - JEP-106 */ + uint8_t msd[26]; /* 150-175 Mfg's Specific Data */ + uint8_t cust[80]; /* 176-255 Open for Customer Use */ }; +extern uint32_t ddr3_spd_checksum_pass(const struct ddr3_spd_eeprom_s *spd); extern uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd); /* * Byte 2 Fundamental Memory Types. */ #define SPD_MEMTYPE_DDR2 (0x08) +#define SPD_MEMTYPE_DDR3 (0x0B) /* DIMM Type for DDR2 SPD (according to v1.3) */ #define DDR2_SPD_DIMMTYPE_RDIMM (0x01) @@ -132,4 +245,7 @@ extern uint32_t ddr2_spd_checksum_pass(const struct ddr2_spd_eeprom_s *spd); #define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10) #define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20) +/* Byte 3 Key Byte / Module Type for DDR3 SPD */ +#define DDR3_SPD_MODULETYPE_MASK (0x0F) +#define DDR3_SPD_MODULETYPE_UDIMM (0x02) #endif /* _DDR_SPD_H_ */ -- 1.8.4.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox