From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 21/29] video: rework mode_name parameter setting
Date: Fri, 14 Mar 2014 15:32:41 +0100 [thread overview]
Message-ID: <1394807569-23620-22-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1394807569-23620-1-git-send-email-s.hauer@pengutronix.de>
We have dev_add_param_enum() now, so use it for the mode_name
setting. Also drop the special case for single mode framebuffers,
just add the mode_name parameter for this case aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/video/fb.c | 107 ++++++++++++++++++++++++++++++++++++-----------------
include/fb.h | 2 +
2 files changed, 76 insertions(+), 33 deletions(-)
diff --git a/drivers/video/fb.c b/drivers/video/fb.c
index e614d77..d7a3d3c 100644
--- a/drivers/video/fb.c
+++ b/drivers/video/fb.c
@@ -49,34 +49,42 @@ static int fb_enable_set(struct param_d *param, void *priv)
return 0;
}
-static int fb_setup_mode(struct device_d *dev, struct param_d *param,
- const char *val)
+static struct fb_videomode *fb_num_to_mode(struct fb_info *info, int num)
{
- struct fb_info *info = dev->priv;
- struct display_timings *dt;
- int mode, ret;
+ int num_modes;
+
+ num_modes = info->modes.num_modes;
+
+ if (num >= num_modes)
+ return NULL;
+
+ return &info->modes.modes[num];
+}
+
+static int fb_setup_mode(struct fb_info *info)
+{
+ struct device_d *dev = &info->dev;
+ int ret;
+ struct fb_videomode *mode;
if (info->enabled != 0)
return -EPERM;
- if (!val)
- return dev_param_set_generic(dev, param, NULL);
-
- dt = &info->modes;
- for (mode = 0; mode < dt->num_modes; mode++) {
- if (!strcmp(dt->modes[mode].name, val))
- break;
- }
- if (mode >= dt->num_modes)
+ mode = fb_num_to_mode(info, info->current_mode);
+ if (!mode)
return -EINVAL;
- info->mode = &dt->modes[mode];
+ info->mode = mode;
info->xres = info->mode->xres;
info->yres = info->mode->yres;
info->line_length = 0;
- ret = info->fbops->fb_activate_var(info);
+ if (info->fbops->fb_activate_var) {
+ ret = info->fbops->fb_activate_var(info);
+ if (ret)
+ return ret;
+ }
if (!info->line_length)
info->line_length = info->xres * (info->bits_per_pixel >> 3);
@@ -87,13 +95,24 @@ static int fb_setup_mode(struct device_d *dev, struct param_d *param,
dev->resource[0].start = (resource_size_t)info->screen_base;
info->cdev.size = info->line_length * info->yres;
dev->resource[0].end = dev->resource[0].start + info->cdev.size - 1;
- dev_param_set_generic(dev, param, val);
} else
info->cdev.size = 0;
return ret;
}
+static int fb_set_modename(struct param_d *param, void *priv)
+{
+ struct fb_info *info = priv;
+ int ret;
+
+ ret = fb_setup_mode(info);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static struct file_operations fb_ops = {
.read = mem_read,
.write = mem_write,
@@ -102,22 +121,27 @@ static struct file_operations fb_ops = {
.ioctl = fb_ioctl,
};
-static void fb_info(struct device_d *dev)
+static void fb_print_mode(struct fb_videomode *mode)
+{
+ printf("%-20s %dx%d@%d\n", mode->name,
+ mode->xres, mode->yres, mode->refresh);
+}
+
+static void fb_print_modes(struct display_timings *modes)
{
- struct fb_info *info = dev->priv;
int i;
- if (!info->modes.num_modes)
- return;
+ for (i = 0; i < modes->num_modes; i++)
+ fb_print_mode(&modes->modes[i]);
+}
+
+static void fb_info(struct device_d *dev)
+{
+ struct fb_info *info = dev->priv;
printf("available modes:\n");
- for (i = 0; i < info->modes.num_modes; i++) {
- struct fb_videomode *mode = &info->modes.modes[i];
-
- printf("%-10s %dx%d@%d\n", mode->name,
- mode->xres, mode->yres, mode->refresh);
- }
+ fb_print_modes(&info->modes);
printf("\n");
}
@@ -126,10 +150,20 @@ int register_framebuffer(struct fb_info *info)
{
int id = get_free_deviceid("fb");
struct device_d *dev;
- int ret;
+ int ret, num_modes, i;
+ const char **names;
dev = &info->dev;
+ /*
+ * If info->mode is set at this point it's the only mode
+ * the fb supports. move it over to the modes list.
+ */
+ if (info->mode) {
+ info->modes.modes = info->mode;
+ info->modes.num_modes = 1;
+ }
+
if (!info->line_length)
info->line_length = info->xres * (info->bits_per_pixel >> 3);
@@ -157,11 +191,18 @@ int register_framebuffer(struct fb_info *info)
dev_add_param_bool(dev, "enable", fb_enable_set, NULL,
&info->p_enable, info);
- if (info->modes.num_modes &&
- (info->fbops->fb_activate_var != NULL)) {
- dev_add_param(dev, "mode_name", fb_setup_mode, NULL, 0);
- dev_set_param(dev, "mode_name", info->modes.modes[0].name);
- }
+ num_modes = info->modes.num_modes;
+
+ names = xzalloc(sizeof(char *) * num_modes);
+
+ for (i = 0; i < info->modes.num_modes; i++)
+ names[i] = info->modes.modes[i].name;
+
+ dev_add_param_enum(dev, "mode_name", fb_set_modename, NULL, &info->current_mode, names, num_modes, info);
+
+ info->mode = fb_num_to_mode(info, 0);
+
+ fb_setup_mode(info);
ret = devfs_create(&info->cdev);
if (ret)
diff --git a/include/fb.h b/include/fb.h
index 1cc352b..91d3fe4 100644
--- a/include/fb.h
+++ b/include/fb.h
@@ -94,6 +94,8 @@ struct fb_info {
struct fb_videomode *mode;
struct display_timings modes;
+ int current_mode;
+
struct fb_ops *fbops;
struct device_d dev; /* This is this fb device */
--
1.9.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-03-14 14:33 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-14 14:32 i.MX IPUv3 support Sascha Hauer
2014-03-14 14:32 ` [PATCH 01/29] err.h: Add PTR_ERR_OR_ZERO from kernel Sascha Hauer
2014-03-14 14:32 ` [PATCH 02/29] ARM: i.MX6: Add initial variscite VAR-SOM-MX6 CPU support Sascha Hauer
2014-03-14 14:32 ` [PATCH 03/29] ARM: dts: i.MX6: Add IPU aliases Sascha Hauer
2014-03-14 14:32 ` [PATCH 04/29] ARM: dts: i.MX6: Add HDMI nodes Sascha Hauer
2014-03-14 14:32 ` [PATCH 05/29] ARM: dts: i.MX53: Fix IPU register size Sascha Hauer
2014-03-14 14:32 ` [PATCH 06/29] i2c: i.MX: move to earlier initcall Sascha Hauer
2014-03-14 14:32 ` [PATCH 07/29] i2c: implement of_find_i2c_adapter_by_node Sascha Hauer
2014-03-14 14:32 ` [PATCH 08/29] clk: implement clk_round_rate Sascha Hauer
2014-03-14 14:32 ` [PATCH 09/29] clk: clk-mux: pass clk flags from initializers Sascha Hauer
2014-03-14 14:32 ` [PATCH 10/29] clk: clk-gate: pass flags to initializers Sascha Hauer
2014-03-14 14:32 ` [PATCH 11/29] clk: clk-fixed-factor: " Sascha Hauer
2014-03-14 14:32 ` [PATCH 12/29] clk: clk-divider: " Sascha Hauer
2014-03-14 14:32 ` [PATCH 13/29] clk: introduce CLK_SET_RATE_PARENT flag Sascha Hauer
2014-03-14 16:06 ` Alexander Shiyan
2014-03-17 6:43 ` Sascha Hauer
2014-03-14 14:32 ` [PATCH 14/29] clk: clk-divider: sync with kernel code Sascha Hauer
2014-03-14 14:32 ` [PATCH 15/29] clk: let clk-divider handle the table based divider aswell Sascha Hauer
2014-03-14 14:32 ` [PATCH 16/29] clk: clk-fixed-factor: add set_rate/round_rate callbacks Sascha Hauer
2014-03-14 14:32 ` [PATCH 17/29] clk: Add parent round/set rate for mux and gate Sascha Hauer
2014-03-14 14:32 ` [PATCH 18/29] ARM: i.MX: introduce clk parent rate changes Sascha Hauer
2014-03-14 14:32 ` [PATCH 19/29] ARM: i.MX6: Add video clocks Sascha Hauer
2014-03-14 14:32 ` [PATCH 20/29] video: introduce struct display_timings Sascha Hauer
2014-03-14 14:32 ` Sascha Hauer [this message]
2014-04-07 14:45 ` [PATCH 21/29] video: rework mode_name parameter setting Alexander Shiyan
2014-04-08 6:39 ` Sascha Hauer
2014-03-14 14:32 ` [PATCH 22/29] video: Add display timing from devicetree helper Sascha Hauer
2014-03-14 14:32 ` [PATCH 23/29] video: Add edid support Sascha Hauer
2014-03-14 14:32 ` [PATCH 24/29] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority Sascha Hauer
2014-03-14 14:32 ` [PATCH 25/29] video: Add kernel fourcc defines Sascha Hauer
2014-03-14 14:32 ` [PATCH 27/29] video: i.MX IPUv3: Add lvds bridge support Sascha Hauer
2014-03-14 14:32 ` [PATCH 28/29] video: i.MX IPUv3: Add hdmi support Sascha Hauer
2014-03-14 14:32 ` [PATCH 29/29] ARM: update imx_v7_defconfig Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394807569-23620-22-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox