From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 08/29] clk: implement clk_round_rate
Date: Fri, 14 Mar 2014 15:32:28 +0100 [thread overview]
Message-ID: <1394807569-23620-9-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1394807569-23620-1-git-send-email-s.hauer@pengutronix.de>
Instead of returning just the current rate implement clk_round_rate
properly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/clk/clk.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 31d73c0..c67b2f4 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -104,9 +104,19 @@ unsigned long clk_get_rate(struct clk *clk)
long clk_round_rate(struct clk *clk, unsigned long rate)
{
+ unsigned long parent_rate = 0;
+ struct clk *parent;
+
if (IS_ERR(clk))
return 0;
+ parent = clk_get_parent(clk);
+ if (parent)
+ parent_rate = clk_get_rate(parent);
+
+ if (clk->ops->round_rate)
+ return clk->ops->round_rate(clk, rate, &parent_rate);
+
return clk_get_rate(clk);
}
--
1.9.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-03-14 14:33 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-14 14:32 i.MX IPUv3 support Sascha Hauer
2014-03-14 14:32 ` [PATCH 01/29] err.h: Add PTR_ERR_OR_ZERO from kernel Sascha Hauer
2014-03-14 14:32 ` [PATCH 02/29] ARM: i.MX6: Add initial variscite VAR-SOM-MX6 CPU support Sascha Hauer
2014-03-14 14:32 ` [PATCH 03/29] ARM: dts: i.MX6: Add IPU aliases Sascha Hauer
2014-03-14 14:32 ` [PATCH 04/29] ARM: dts: i.MX6: Add HDMI nodes Sascha Hauer
2014-03-14 14:32 ` [PATCH 05/29] ARM: dts: i.MX53: Fix IPU register size Sascha Hauer
2014-03-14 14:32 ` [PATCH 06/29] i2c: i.MX: move to earlier initcall Sascha Hauer
2014-03-14 14:32 ` [PATCH 07/29] i2c: implement of_find_i2c_adapter_by_node Sascha Hauer
2014-03-14 14:32 ` Sascha Hauer [this message]
2014-03-14 14:32 ` [PATCH 09/29] clk: clk-mux: pass clk flags from initializers Sascha Hauer
2014-03-14 14:32 ` [PATCH 10/29] clk: clk-gate: pass flags to initializers Sascha Hauer
2014-03-14 14:32 ` [PATCH 11/29] clk: clk-fixed-factor: " Sascha Hauer
2014-03-14 14:32 ` [PATCH 12/29] clk: clk-divider: " Sascha Hauer
2014-03-14 14:32 ` [PATCH 13/29] clk: introduce CLK_SET_RATE_PARENT flag Sascha Hauer
2014-03-14 16:06 ` Alexander Shiyan
2014-03-17 6:43 ` Sascha Hauer
2014-03-14 14:32 ` [PATCH 14/29] clk: clk-divider: sync with kernel code Sascha Hauer
2014-03-14 14:32 ` [PATCH 15/29] clk: let clk-divider handle the table based divider aswell Sascha Hauer
2014-03-14 14:32 ` [PATCH 16/29] clk: clk-fixed-factor: add set_rate/round_rate callbacks Sascha Hauer
2014-03-14 14:32 ` [PATCH 17/29] clk: Add parent round/set rate for mux and gate Sascha Hauer
2014-03-14 14:32 ` [PATCH 18/29] ARM: i.MX: introduce clk parent rate changes Sascha Hauer
2014-03-14 14:32 ` [PATCH 19/29] ARM: i.MX6: Add video clocks Sascha Hauer
2014-03-14 14:32 ` [PATCH 20/29] video: introduce struct display_timings Sascha Hauer
2014-03-14 14:32 ` [PATCH 21/29] video: rework mode_name parameter setting Sascha Hauer
2014-04-07 14:45 ` Alexander Shiyan
2014-04-08 6:39 ` Sascha Hauer
2014-03-14 14:32 ` [PATCH 22/29] video: Add display timing from devicetree helper Sascha Hauer
2014-03-14 14:32 ` [PATCH 23/29] video: Add edid support Sascha Hauer
2014-03-14 14:32 ` [PATCH 24/29] ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority Sascha Hauer
2014-03-14 14:32 ` [PATCH 25/29] video: Add kernel fourcc defines Sascha Hauer
2014-03-14 14:32 ` [PATCH 27/29] video: i.MX IPUv3: Add lvds bridge support Sascha Hauer
2014-03-14 14:32 ` [PATCH 28/29] video: i.MX IPUv3: Add hdmi support Sascha Hauer
2014-03-14 14:32 ` [PATCH 29/29] ARM: update imx_v7_defconfig Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394807569-23620-9-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox