From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 4/5] ARM: dts: update paz00 DT to Linux 3.14
Date: Sat, 5 Apr 2014 13:52:10 +0200 [thread overview]
Message-ID: <1396698731-22184-4-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1396698731-22184-1-git-send-email-dev@lynxeye.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
arch/arm/dts/tegra20-paz00.dts | 56 +++++++++++++++++++++++++-----------------
1 file changed, 34 insertions(+), 22 deletions(-)
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
index d82d406..c7cd8e6 100644
--- a/arch/arm/dts/tegra20-paz00.dts
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -1,13 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "Toshiba AC100 / Dynabook AZ";
compatible = "compal,paz00", "nvidia,tegra20";
- host1x {
- hdmi {
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -19,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -173,39 +183,39 @@
"gpu", "gpu7", "gpv", "i2cp", "pta",
"rm", "sdio1", "slxk", "spdo", "uac",
"uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp", "dap3", "dap4", "dtb",
"dtc", "dte", "slxa", "slxc", "slxd",
"spdi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib", "spid",
"spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "irrx", "irtx", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"spic", "spig", "uaa", "uab";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
"spie", "spih", "uad", "uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "ld0", "ld1", "ld2",
@@ -214,23 +224,23 @@
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhs", "lsc0", "lspi",
"lvs", "pmc";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_lcsn {
nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
"lm0", "lm1", "lpp", "lpw0", "lpw1",
"lpw2", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "lvp1", "sdb";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
};
};
@@ -264,7 +274,7 @@
clock-frequency = <100000>;
};
- nvec {
+ nvec@7000c500 {
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -276,6 +286,8 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
};
i2c@7000d000 {
@@ -411,7 +423,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
@@ -468,7 +480,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -482,7 +494,7 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
--
1.9.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-04-05 11:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-05 11:52 [PATCH 1/5] clk: tegra20: convert to dt-binding defines Lucas Stach
2014-04-05 11:52 ` [PATCH 2/5] dt-bindings: add pinctrl-tegra.h Lucas Stach
2014-04-05 11:52 ` [PATCH 3/5] ARM: dts: update Tegra20 base dtsi to Linux 3.14 Lucas Stach
2014-04-05 11:52 ` Lucas Stach [this message]
2014-04-05 11:52 ` [PATCH 5/5] ARM: dts: update colibri + iris DTs " Lucas Stach
2014-04-07 6:36 ` [PATCH 1/5] clk: tegra20: convert to dt-binding defines Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396698731-22184-4-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox