From: michel@reverze.net
To: barebox@lists.infradead.org
Subject: [PATCHv3 2/3] x86: Add support for IDE on the legacy I/O ports
Date: Sat, 5 Apr 2014 15:37:37 +0200 [thread overview]
Message-ID: <1396705058-15047-2-git-send-email-michel@reverze.net> (raw)
In-Reply-To: <1396705058-15047-1-git-send-email-michel@reverze.net>
From: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Michel Stam <michel@reverze.net>
---
arch/x86/boards/x86_generic/Makefile | 3 +
arch/x86/boards/x86_generic/disk_bios_drive.c | 46 +++++++++++
arch/x86/boards/x86_generic/envsector.h | 36 ++++++++
arch/x86/boards/x86_generic/generic_pc.c | 53 +------------
arch/x86/boards/x86_generic/intf_platform_ide.c | 93 +++++++++++++++++++++
arch/x86/boards/x86_generic/serial_ns16550.c | 47 +++++++++++
drivers/ata/ide-sff.c | 98 +++++++++++++++++++----
drivers/ata/intf_platform_ide.c | 37 ++++++++-
include/ata_drive.h | 1 +
9 files changed, 341 insertions(+), 73 deletions(-)
create mode 100644 arch/x86/boards/x86_generic/disk_bios_drive.c
create mode 100644 arch/x86/boards/x86_generic/envsector.h
create mode 100644 arch/x86/boards/x86_generic/intf_platform_ide.c
create mode 100644 arch/x86/boards/x86_generic/serial_ns16550.c
diff --git a/arch/x86/boards/x86_generic/Makefile b/arch/x86/boards/x86_generic/Makefile
index 248240d..fca707d 100644
--- a/arch/x86/boards/x86_generic/Makefile
+++ b/arch/x86/boards/x86_generic/Makefile
@@ -1 +1,4 @@
obj-y += generic_pc.o
+obj-$(CONFIG_DISK_INTF_PLATFORM_IDE) += intf_platform_ide.o
+obj-$(CONFIG_DISK_BIOS) += disk_bios_drive.o
+obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o
diff --git a/arch/x86/boards/x86_generic/disk_bios_drive.c b/arch/x86/boards/x86_generic/disk_bios_drive.c
new file mode 100644
index 0000000..f33f48c
--- /dev/null
+++ b/arch/x86/boards/x86_generic/disk_bios_drive.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Juergen Beisert, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+/**
+ * @file
+ * @brief Generic PC support for the BIOS disk interface
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <linux/err.h>
+#include "envsector.h"
+
+static int bios_disk_init(void)
+{
+ struct cdev *cdev;
+
+ add_generic_device("biosdrive", DEVICE_ID_DYNAMIC, NULL, 0, 0,
+ IORESOURCE_MEM, NULL);
+
+ if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
+ cdev = devfs_add_partition("biosdisk0",
+ pers_env_storage * 512,
+ (unsigned)pers_env_size * 512,
+ DEVFS_PARTITION_FIXED, "env0");
+ printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
+ } else
+ printf("No persistent storage defined\n");
+
+ return 0;
+}
+device_initcall(bios_disk_init);
diff --git a/arch/x86/boards/x86_generic/envsector.h b/arch/x86/boards/x86_generic/envsector.h
new file mode 100644
index 0000000..86511c8
--- /dev/null
+++ b/arch/x86/boards/x86_generic/envsector.h
@@ -0,0 +1,36 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+/**
+ * @file
+ * @brief x86 Generic PC common definitions
+ */
+#ifndef __X86_ENVSECTOR_H
+#define __ENVSECTOR_H
+
+/*
+ * These datas are from the MBR, created by the linker and filled by the
+ * setup tool while installing barebox on the disk drive
+ */
+extern uint64_t pers_env_storage;
+extern uint16_t pers_env_size;
+extern uint8_t pers_env_drive;
+
+/**
+ * Persistent environment "not used" marker.
+ * Note: Must be in accordance to the value the tool "setup_mbr" writes.
+ */
+#define PATCH_AREA_PERS_SIZE_UNUSED 0x000
+
+#endif
diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
index 74a7224..5560efc 100644
--- a/arch/x86/boards/x86_generic/generic_pc.c
+++ b/arch/x86/boards/x86_generic/generic_pc.c
@@ -24,67 +24,16 @@
#include <driver.h>
#include <init.h>
#include <asm/syslib.h>
-#include <ns16550.h>
#include <linux/err.h>
-/*
- * These datas are from the MBR, created by the linker and filled by the
- * setup tool while installing barebox on the disk drive
- */
-extern uint64_t pers_env_storage;
-extern uint16_t pers_env_size;
-extern uint8_t pers_env_drive;
-
-/**
- * Persistent environment "not used" marker.
- * Note: Must be in accordance to the value the tool "setup_mbr" writes.
- */
-#define PATCH_AREA_PERS_SIZE_UNUSED 0x000
-
static int devices_init(void)
{
- struct cdev *cdev;
-
/* extended memory only */
add_mem_device("ram0", 0x0, bios_get_memsize() << 10,
IORESOURCE_MEM_WRITEABLE);
- add_generic_device("biosdrive", DEVICE_ID_DYNAMIC, NULL, 0, 0, IORESOURCE_MEM,
- NULL);
-
- if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
- cdev = devfs_add_partition("biosdisk0",
- pers_env_storage * 512,
- (unsigned)pers_env_size * 512,
- DEVFS_PARTITION_FIXED, "env0");
- printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
- } else
- printf("No persistent storage defined\n");
-
- return 0;
-}
-device_initcall(devices_init);
-
-#ifdef CONFIG_DRIVER_SERIAL_NS16550
-
-static struct NS16550_plat serial_plat = {
- .clock = 1843200,
- .reg_read = x86_uart_read,
- .reg_write = x86_uart_write,
-};
-
-static int pc_console_init(void)
-{
- barebox_set_model("X86 generic barebox");
- barebox_set_hostname("x86");
-
- /* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, 0, &serial_plat);
-
return 0;
}
-console_initcall(pc_console_init);
-
-#endif
+device_initcall(devices_init);
/** @page generic_pc Generic PC based bootloader
diff --git a/arch/x86/boards/x86_generic/intf_platform_ide.c b/arch/x86/boards/x86_generic/intf_platform_ide.c
new file mode 100644
index 0000000..18a2620
--- /dev/null
+++ b/arch/x86/boards/x86_generic/intf_platform_ide.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2014 Juergen Beisert, Pengutronix, Michel Stam,
+ * Fugro Intersite
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+/**
+ * @file
+ * @brief Generic PC support for the IDE platform driver
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <linux/err.h>
+#include <platform_ide.h>
+#include "envsector.h"
+
+static struct ide_port_info ide_plat = {
+ .ioport_shift = 0,
+ .dataif_be = 0,
+};
+
+static struct resource primary_ide_resources[] = {
+ {
+ .name = "base",
+ .start = 0x1f0,
+ .end = 0x1f7,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .name = "alt",
+ .start = 0x3f6,
+ .end = 0x3f7,
+ .flags = IORESOURCE_IO
+ }
+};
+
+static struct resource secondary_ide_resources[] = {
+ {
+ .name = "base",
+ .start = 0x170,
+ .end = 0x177,
+ .flags = IORESOURCE_IO
+ },
+};
+
+static struct device_d primary_ide_device = {
+ .name = "ide_intf",
+ .id = 0,
+ .platform_data = &ide_plat,
+ .resource = primary_ide_resources,
+ .num_resources = ARRAY_SIZE(primary_ide_resources),
+};
+
+static struct device_d secondary_ide_device = {
+ .name = "ide_intf",
+ .id = 1,
+ .platform_data = &ide_plat,
+ .resource = secondary_ide_resources,
+ .num_resources = ARRAY_SIZE(secondary_ide_resources),
+};
+
+static int platform_ide_init(void)
+{
+ struct cdev *cdev;
+
+ platform_device_register(&primary_ide_device);
+ platform_device_register(&secondary_ide_device);
+
+ if (pers_env_size != PATCH_AREA_PERS_SIZE_UNUSED) {
+ cdev = devfs_add_partition("ata0",
+ pers_env_storage * 512,
+ (unsigned)pers_env_size * 512,
+ DEVFS_PARTITION_FIXED, "env0");
+ printf("Partition: %ld\n", IS_ERR(cdev) ? PTR_ERR(cdev) : 0);
+ } else
+ printf("No persistent storage defined\n");
+
+ return 0;
+}
+device_initcall(platform_ide_init);
diff --git a/arch/x86/boards/x86_generic/serial_ns16550.c b/arch/x86/boards/x86_generic/serial_ns16550.c
new file mode 100644
index 0000000..cae61df
--- /dev/null
+++ b/arch/x86/boards/x86_generic/serial_ns16550.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2009 Juergen Beisert, Pengutronix, Michel Stam,
+ * Fugro Intersite
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ */
+
+/**
+ * @file
+ * @brief Generic PC support to let barebox acting as a boot loader
+ */
+
+#include <common.h>
+#include <types.h>
+#include <driver.h>
+#include <init.h>
+#include <asm/syslib.h>
+#include <ns16550.h>
+#include <linux/err.h>
+
+static struct NS16550_plat serial_plat = {
+ .clock = 1843200,
+ .reg_read = x86_uart_read,
+ .reg_write = x86_uart_write,
+};
+
+static int pc_console_init(void)
+{
+ barebox_set_model("X86 generic barebox");
+ barebox_set_hostname("x86");
+
+ /* Register the serial port */
+ add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, 0, &serial_plat);
+
+ return 0;
+}
+console_initcall(pc_console_init);
diff --git a/drivers/ata/ide-sff.c b/drivers/ata/ide-sff.c
index 3d5932e..a8f2b26 100644
--- a/drivers/ata/ide-sff.c
+++ b/drivers/ata/ide-sff.c
@@ -15,13 +15,74 @@
#define DISK_SLAVE 1
/**
+ * Read a byte from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint8_t ata_rd_byte(struct ide_port *ide, void __iomem *addr)
+{
+ if (ide->io.mmio)
+ return readb(addr);
+ else
+ return (uint8_t) inb((int) addr);
+}
+
+/**
+ * Write a byte to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_byte(struct ide_port *ide, uint8_t value,
+ void __iomem *addr)
+{
+ if (ide->io.mmio)
+ writeb(value, addr);
+ else
+ outb(value, (int) addr);
+}
+
+/**
+ * Read a word from the ATA controller
+ * @param ide IDE port structure
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline uint16_t ata_rd_word(struct ide_port *ide,
+ void __iomem *addr)
+{
+ if (ide->io.mmio)
+ return readw(addr);
+ else
+ return (uint16_t) inw((int) addr);
+}
+
+/**
+ * Write a word to the ATA controller
+ * @param ide IDE port structure
+ * @param value Value to write
+ * @param addr Register adress
+ * @return Register's content
+ */
+static inline void ata_wr_word(struct ide_port *ide, uint16_t value,
+ void __iomem *addr)
+{
+ if (ide->io.mmio)
+ writew(value, addr);
+ else
+ outw(value, (int) addr);
+}
+
+/**
* Read the status register of the ATA drive
* @param io Register file
* @return Register's content
*/
static uint8_t ata_rd_status(struct ide_port *ide)
{
- return readb(ide->io.status_addr);
+ return ata_rd_byte(ide, ide->io.status_addr);
}
/**
@@ -83,12 +144,13 @@ static int ata_set_lba_sector(struct ide_port *ide, unsigned drive, uint64_t num
if (num > 0x0FFFFFFF || drive > 1)
return -EINVAL;
- writeb(0xA0 | LBA_FLAG | drive << 4 | num >> 24, ide->io.device_addr);
- writeb(0x00, ide->io.error_addr);
- writeb(0x01, ide->io.nsect_addr);
- writeb(num, ide->io.lbal_addr); /* 0 ... 7 */
- writeb(num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
- writeb(num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
+ ata_wr_byte(ide, 0xA0 | LBA_FLAG | drive << 4 | num >> 24,
+ ide->io.device_addr);
+ ata_wr_byte(ide, 0x00, ide->io.error_addr);
+ ata_wr_byte(ide, 0x01, ide->io.nsect_addr);
+ ata_wr_byte(ide, num, ide->io.lbal_addr); /* 0 ... 7 */
+ ata_wr_byte(ide, num >> 8, ide->io.lbam_addr); /* 8 ... 15 */
+ ata_wr_byte(ide, num >> 16, ide->io.lbah_addr); /* 16 ... 23 */
return 0;
}
@@ -107,7 +169,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
if (rc != 0)
return rc;
- writeb(cmd, ide->io.command_addr);
+ ata_wr_byte(ide, cmd, ide->io.command_addr);
return 0;
}
@@ -118,7 +180,7 @@ static int ata_wr_cmd(struct ide_port *ide, uint8_t cmd)
*/
static void ata_wr_dev_ctrl(struct ide_port *ide, uint8_t val)
{
- writeb(val, ide->io.ctl_addr);
+ ata_wr_byte(ide, val, ide->io.ctl_addr);
}
/**
@@ -133,10 +195,10 @@ static void ata_rd_sector(struct ide_port *ide, void *buf)
if (ide->io.dataif_be) {
for (; u > 0; u--)
- *b++ = be16_to_cpu(readw(ide->io.data_addr));
+ *b++ = be16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
} else {
for (; u > 0; u--)
- *b++ = le16_to_cpu(readw(ide->io.data_addr));
+ *b++ = le16_to_cpu(ata_rd_word(ide, ide->io.data_addr));
}
}
@@ -152,10 +214,10 @@ static void ata_wr_sector(struct ide_port *ide, const void *buf)
if (ide->io.dataif_be) {
for (; u > 0; u--)
- writew(cpu_to_be16(*b++), ide->io.data_addr);
+ ata_wr_word(ide, cpu_to_be16(*b++), ide->io.data_addr);
} else {
for (; u > 0; u--)
- writew(cpu_to_le16(*b++), ide->io.data_addr);
+ ata_wr_word(ide, cpu_to_le16(*b++), ide->io.data_addr);
}
}
@@ -169,10 +231,10 @@ static int ide_read_id(struct ata_port *port, void *buf)
struct ide_port *ide = to_ata_drive_access(port);
int rc;
- writeb(0xA0, ide->io.device_addr); /* FIXME drive */
- writeb(0x00, ide->io.lbal_addr);
- writeb(0x00, ide->io.lbam_addr);
- writeb(0x00, ide->io.lbah_addr);
+ ata_wr_byte(ide, 0xA0, ide->io.device_addr); /* FIXME drive */
+ ata_wr_byte(ide, 0x00, ide->io.lbal_addr);
+ ata_wr_byte(ide, 0x00, ide->io.lbam_addr);
+ ata_wr_byte(ide, 0x00, ide->io.lbah_addr);
rc = ata_wr_cmd(ide, ATA_CMD_ID_ATA);
if (rc != 0)
@@ -327,6 +389,8 @@ int ide_port_register(struct ide_port *ide)
ide->port.ops = &ide_ops;
ret = ata_port_register(&ide->port);
+ if (!ret)
+ ata_port_detect(&ide->port);
if (ret)
free(ide);
diff --git a/drivers/ata/intf_platform_ide.c b/drivers/ata/intf_platform_ide.c
index 8ae0f05..ecc2546 100644
--- a/drivers/ata/intf_platform_ide.c
+++ b/drivers/ata/intf_platform_ide.c
@@ -82,15 +82,46 @@ static int platform_ide_probe(struct device_d *dev)
struct ide_port_info *pdata = dev->platform_data;
struct ide_port *ide;
void *reg_base, *alt_base;
+ struct resource *reg, *alt;
+ int mmio;
if (pdata == NULL) {
dev_err(dev, "No platform data. Cannot continue\n");
return -EINVAL;
}
+ alt = NULL;
+ reg = dev_get_resource(dev, IORESOURCE_MEM, 0);
+ mmio = (reg != NULL);
+ if (reg != NULL) {
+ reg = request_iomem_region(dev_name(dev), reg->start,
+ reg->end);
+ alt = dev_get_resource(dev, IORESOURCE_MEM, 1);
+ if (alt != NULL)
+ alt = request_iomem_region(dev_name(dev), alt->start,
+ alt->end);
+ } else {
+ reg = dev_get_resource(dev, IORESOURCE_IO, 0);
+ if (reg != NULL) {
+ reg = request_ioport_region(dev_name(dev), reg->start,
+ reg->end);
+ alt = dev_get_resource(dev, IORESOURCE_IO, 1);
+ if (alt != NULL)
+ alt = request_ioport_region(dev_name(dev),
+ alt->start,
+ alt->end);
+ }
+ }
+
+ reg_base = (reg != NULL ? (void __force __iomem *) reg->start : NULL);
+ alt_base = (alt != NULL ? (void __force __iomem *) alt->start : NULL);
+
+ if (!reg_base)
+ return -ENODEV;
+
ide = xzalloc(sizeof(*ide));
- reg_base = dev_request_mem_region(dev, 0);
- alt_base = dev_request_mem_region(dev, 1);
+ ide->io.mmio = mmio;
+
platform_ide_setup_port(reg_base, alt_base, &ide->io, pdata->ioport_shift);
ide->io.reset = pdata->reset;
ide->io.dataif_be = pdata->dataif_be;
@@ -125,6 +156,4 @@ device_platform_driver(platform_ide_driver);
*
* This driver does not change any access timings due to the fact it has no idea
* how to do so. So, do not expect an impressive data throughput.
- *
- * @todo Support also the IO port access method, the x86 architecture is using
*/
diff --git a/include/ata_drive.h b/include/ata_drive.h
index 6d6cca4..44073cb 100644
--- a/include/ata_drive.h
+++ b/include/ata_drive.h
@@ -119,6 +119,7 @@ struct ata_ioports {
/* hard reset line handling */
void (*reset)(int); /* true: assert reset, false: de-assert reset */
int dataif_be; /* true if 16 bit data register is big endian */
+ int mmio; /* true if memory-mapped io */
};
struct ata_port;
--
1.7.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-04-05 14:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-05 13:37 [PATCHv3 1/3] common: Allow for I/O mapped I/O michel
2014-04-05 13:37 ` michel [this message]
2014-04-05 13:37 ` [PATCHv3 3/3] x86: ns16550: Rework driver to allow for x86 I/O space michel
2014-04-07 7:26 ` [PATCHv3 1/3] common: Allow for I/O mapped I/O Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396705058-15047-2-git-send-email-michel@reverze.net \
--to=michel@reverze.net \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox