From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WegGj-0003XO-Jm for barebox@lists.infradead.org; Mon, 28 Apr 2014 07:46:31 +0000 From: Sascha Hauer Date: Mon, 28 Apr 2014 09:45:57 +0200 Message-Id: <1398671161-29045-8-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1398671161-29045-1-git-send-email-s.hauer@pengutronix.de> References: <1398671161-29045-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file To: barebox@lists.infradead.org Signed-off-by: Sascha Hauer --- arch/arm/dts/imx25.dtsi | 535 +----------------------------------------------- 1 file changed, 4 insertions(+), 531 deletions(-) diff --git a/arch/arm/dts/imx25.dtsi b/arch/arm/dts/imx25.dtsi index 003c43c..2b93f77 100644 --- a/arch/arm/dts/imx25.dtsi +++ b/arch/arm/dts/imx25.dtsi @@ -14,545 +14,18 @@ / { aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; mmc0 = &esdhc1; mmc2 = &esdhc2; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - spi0 = &spi1; - spi1 = &spi2; - spi2 = &spi3; - usb0 = &usbotg; - usb1 = &usbhost1; - }; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - compatible = "arm,arm926ej-s"; - device_type = "cpu"; - }; - }; - - asic: asic-interrupt-controller@68000000 { - compatible = "fsl,imx25-asic", "fsl,avic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x68000000 0x8000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - osc { - compatible = "fsl,imx-osc", "fixed-clock"; - clock-frequency = <24000000>; - }; }; soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&asic>; - ranges; - - aips@43f00000 { /* AIPS1 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x43f00000 0x100000>; - ranges; - - i2c1: i2c@43f80000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; - reg = <0x43f80000 0x4000>; - clocks = <&clks 48>; - clock-names = ""; - interrupts = <3>; - status = "disabled"; - }; - - i2c3: i2c@43f84000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; - reg = <0x43f84000 0x4000>; - clocks = <&clks 48>; - clock-names = ""; - interrupts = <10>; - status = "disabled"; - }; - - can1: can@43f88000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; - reg = <0x43f88000 0x4000>; - interrupts = <43>; - clocks = <&clks 75>, <&clks 75>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - can2: can@43f8c000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; - reg = <0x43f8c000 0x4000>; - interrupts = <44>; - clocks = <&clks 76>, <&clks 76>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart1: serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 120>, <&clks 57>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart2: serial@43f94000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f94000 0x4000>; - interrupts = <32>; - clocks = <&clks 121>, <&clks 57>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - i2c2: i2c@43f98000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; - reg = <0x43f98000 0x4000>; - clocks = <&clks 48>; - clock-names = ""; - interrupts = <4>; - status = "disabled"; - }; - - owire@43f9c000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x43f9c000 0x4000>; - clocks = <&clks 51>; - clock-names = ""; - interrupts = <2>; - status = "disabled"; - }; - - spi1: cspi@43fa4000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; - reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; - clock-names = "ipg", "per"; - interrupts = <14>; - status = "disabled"; - }; - - kpp@43fa8000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x43fa8000 0x4000>; - clocks = <&clks 102>; - clock-names = ""; - interrupts = <24>; - status = "disabled"; - }; - - iomuxc: iomuxc@43fac000 { - compatible = "fsl,imx25-iomuxc"; - reg = <0x43fac000 0x4000>; - }; - - audmux: audmux@43fb0000 { - compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; - reg = <0x43fb0000 0x4000>; - status = "disabled"; - }; - }; - - spba@50000000 { - compatible = "fsl,spba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x50000000 0x40000>; - ranges; - - spi3: cspi@50004000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; - reg = <0x50004000 0x4000>; - interrupts = <0>; - clocks = <&clks 80>, <&clks 80>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart4: serial@50008000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x50008000 0x4000>; - interrupts = <5>; - clocks = <&clks 123>, <&clks 57>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@5000c000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x5000c000 0x4000>; - interrupts = <18>; - clocks = <&clks 122>, <&clks 57>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - spi2: cspi@50010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; - reg = <0x50010000 0x4000>; - clocks = <&clks 79>, <&clks 79>; - clock-names = "ipg", "per"; - interrupts = <13>; - status = "disabled"; - }; - - ssi2: ssi@50014000 { - compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; - reg = <0x50014000 0x4000>; - interrupts = <11>; - clocks = <&clks 118>; - clock-names = "ipg"; - dmas = <&sdma 24 1 0>, - <&sdma 25 1 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - esai@50018000 { - reg = <0x50018000 0x4000>; - interrupts = <7>; - }; - - uart5: serial@5002c000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x5002c000 0x4000>; - interrupts = <40>; - clocks = <&clks 124>, <&clks 57>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - tsc: tsc@50030000 { - compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; - reg = <0x50030000 0x4000>; - interrupts = <46>; - clocks = <&clks 119>; - clock-names = "ipg"; - status = "disabled"; - }; - - ssi1: ssi@50034000 { - compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; - reg = <0x50034000 0x4000>; - interrupts = <12>; - clocks = <&clks 117>; - clock-names = "ipg"; - dmas = <&sdma 28 1 0>, - <&sdma 29 1 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - fec: ethernet@50038000 { - compatible = "fsl,imx25-fec"; - reg = <0x50038000 0x4000>; - interrupts = <57>; - clocks = <&clks 88>, <&clks 65>; - clock-names = "ipg", "ahb"; - status = "disabled"; - }; - }; - - aips@53f00000 { /* AIPS2 */ - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x53f00000 0x100000>; - ranges; - - clks: ccm@53f80000 { - compatible = "fsl,imx25-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <31>; - #clock-cells = <1>; - }; - - gpt4: timer@53f84000 { - compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; - reg = <0x53f84000 0x4000>; - clocks = <&clks 9>, <&clks 45>; - clock-names = "ipg", "per"; - interrupts = <1>; - }; - - gpt3: timer@53f88000 { - compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; - reg = <0x53f88000 0x4000>; - clocks = <&clks 9>, <&clks 47>; - clock-names = "ipg", "per"; - interrupts = <29>; - }; - - gpt2: timer@53f8c000 { - compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; - reg = <0x53f8c000 0x4000>; - clocks = <&clks 9>, <&clks 47>; - clock-names = "ipg", "per"; - interrupts = <53>; - }; - - gpt1: timer@53f90000 { - compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; - reg = <0x53f90000 0x4000>; - clocks = <&clks 9>, <&clks 47>; - clock-names = "ipg", "per"; - interrupts = <54>; - }; - - epit1: timer@53f94000 { - compatible = "fsl,imx25-epit"; - reg = <0x53f94000 0x4000>; - interrupts = <28>; - }; - - epit2: timer@53f98000 { - compatible = "fsl,imx25-epit"; - reg = <0x53f98000 0x4000>; - interrupts = <27>; - }; - - gpio4: gpio@53f9c000 { - compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; - reg = <0x53f9c000 0x4000>; - interrupts = <23>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwm2: pwm@53fa0000 { - compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; - reg = <0x53fa0000 0x4000>; - clocks = <&clks 106>, <&clks 36>; - clock-names = "ipg", "per"; - interrupts = <36>; - }; - - gpio3: gpio@53fa4000 { - compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; - reg = <0x53fa4000 0x4000>; - interrupts = <16>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwm3: pwm@53fa8000 { - compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; - reg = <0x53fa8000 0x4000>; - clocks = <&clks 107>, <&clks 36>; - clock-names = "ipg", "per"; - interrupts = <41>; - }; - - esdhc1: esdhc@53fb4000 { - compatible = "fsl,imx25-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <9>; - clocks = <&clks 86>, <&clks 63>, <&clks 45>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - esdhc2: esdhc@53fb8000 { - compatible = "fsl,imx25-esdhc"; - reg = <0x53fb8000 0x4000>; - interrupts = <8>; - clocks = <&clks 87>, <&clks 64>, <&clks 46>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - lcdc: lcdc@53fbc000 { - compatible = "fsl,imx25-fb", "fsl,imx21-fb"; - reg = <0x53fbc000 0x4000>; - interrupts = <39>; - clocks = <&clks 103>, <&clks 66>, <&clks 49>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - slcdc@53fc0000 { - reg = <0x53fc0000 0x4000>; - interrupts = <38>; - status = "disabled"; - }; - - pwm4: pwm@53fc8000 { - compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - reg = <0x53fc8000 0x4000>; - clocks = <&clks 108>, <&clks 36>; - clock-names = "ipg", "per"; - interrupts = <42>; - }; - - gpio1: gpio@53fcc000 { - compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; - reg = <0x53fcc000 0x4000>; - interrupts = <52>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@53fd0000 { - compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; - reg = <0x53fd0000 0x4000>; - interrupts = <51>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - sdma: sdma@53fd4000 { - compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; - reg = <0x53fd4000 0x4000>; - clocks = <&clks 112>, <&clks 68>; - clock-names = "ipg", "ahb"; - #dma-cells = <3>; - interrupts = <34>; - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; - }; - - wdog@53fdc000 { - compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; - reg = <0x53fdc000 0x4000>; - clocks = <&clks 126>; - clock-names = ""; - interrupts = <55>; - }; - - pwm1: pwm@53fe0000 { - compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; - reg = <0x53fe0000 0x4000>; - clocks = <&clks 105>, <&clks 36>; - clock-names = "ipg", "per"; - interrupts = <26>; - }; - - iim: iim@53ff0000 { - compatible = "fsl,imx25-iim", "fsl,imx27-iim"; - reg = <0x53ff0000 0x4000>; - interrupts = <19>; - clocks = <&clks 99>; - }; - - usbphy1: usbphy@1 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbphy2: usbphy@2 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbotg: usb@53ff4000 { - compatible = "fsl,imx25-usb", "fsl,imx27-usb"; - reg = <0x53ff4000 0x0200>; - interrupts = <37>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; - fsl,usbmisc = <&usbmisc 0>; - status = "disabled"; - }; - - usbhost1: usb@53ff4400 { - compatible = "fsl,imx25-usb", "fsl,imx27-usb"; - reg = <0x53ff4400 0x0200>; - interrupts = <35>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; - fsl,usbmisc = <&usbmisc 1>; - status = "disabled"; - }; - - usbmisc: usbmisc@53ff4600 { - #index-cells = <1>; - compatible = "fsl,imx25-usbmisc"; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; - reg = <0x53ff4600 0x00f>; - }; - - dryice@53ffc000 { - compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; - reg = <0x53ffc000 0x4000>; - clocks = <&clks 81>; - clock-names = "ipg"; - interrupts = <25>; - }; - }; - iram: sram@78000000 { compatible = "mmio-sram"; reg = <0x78000000 0x20000>; }; - - emi@80000000 { - compatible = "fsl,emi-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80000000 0x3b002000>; - ranges; - - nfc: nand@bb000000 { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "fsl,imx25-nand"; - reg = <0xbb000000 0x2000>; - clocks = <&clks 50>; - clock-names = ""; - interrupts = <33>; - status = "disabled"; - }; - }; }; }; + +&usbmisc { + status = "okay"; +}; -- 1.9.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox