From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.phytec.co.uk ([217.6.246.34] helo=root.phytec.de) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WfQUl-0000L0-3G for barebox@lists.infradead.org; Wed, 30 Apr 2014 09:08:05 +0000 Received: from idefix.phytec.de (idefix.phytec.de [172.16.0.10]) by root.phytec.de (Postfix) with ESMTP id 092D3BF0EB for ; Wed, 30 Apr 2014 11:07:37 +0200 (CEST) From: Christian Hemp Date: Wed, 30 Apr 2014 11:07:32 +0200 Message-Id: <1398848852-29093-1-git-send-email-c.hemp@phytec.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2] imx6: Add support for phyCARD-i.MX6 To: barebox@lists.infradead.org Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp --- v2: - remove IP addresses from env - remove boot/net - add ethernet pinmux to pcaaxl3 - add common function to lowlevel.c arch/arm/boards/Makefile | 1 + arch/arm/boards/phytec-phycard-imx6/Makefile | 2 + arch/arm/boards/phytec-phycard-imx6/board.c | 60 ++++++++ arch/arm/boards/phytec-phycard-imx6/env/boot/nand | 12 ++ .../boards/phytec-phycard-imx6/env/boot/sd-ext3 | 11 ++ .../boards/phytec-phycard-imx6/env/config-board | 7 + .../flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg | 7 + .../flash-header-phytec-pcaaxl3-1gib.imxcfg | 7 + .../flash-header-phytec-pcaaxl3-2gib.imxcfg | 8 + .../flash-header-phytec-pcaaxl3.h | 97 +++++++++++++ arch/arm/boards/phytec-phycard-imx6/lowlevel.c | 87 ++++++++++++ arch/arm/configs/imx_v7_defconfig | 1 + arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx6q-phytec-pbaa03.dts | 34 +++++ arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi | 147 ++++++++++++++++++++ arch/arm/mach-imx/Kconfig | 5 + images/Makefile.imx | 16 ++ 17 files changed, 505 insertions(+), 1 deletions(-) create mode 100644 arch/arm/boards/phytec-phycard-imx6/Makefile create mode 100644 arch/arm/boards/phytec-phycard-imx6/board.c create mode 100644 arch/arm/boards/phytec-phycard-imx6/env/boot/nand create mode 100644 arch/arm/boards/phytec-phycard-imx6/env/boot/sd-ext3 create mode 100644 arch/arm/boards/phytec-phycard-imx6/env/config-board create mode 100644 arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg create mode 100644 arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib.imxcfg create mode 100644 arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg create mode 100644 arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3.h create mode 100644 arch/arm/boards/phytec-phycard-imx6/lowlevel.c create mode 100644 arch/arm/dts/imx6q-phytec-pbaa03.dts create mode 100644 arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index 0c1497f..e08ac13 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_MACH_PANDA) += panda/ obj-$(CONFIG_MACH_PCA100) += phytec-phycard-imx27/ obj-$(CONFIG_MACH_PCAAL1) += phytec-phycard-omap3/ obj-$(CONFIG_MACH_PCAAXL2) += phytec-phycard-omap4/ +obj-$(CONFIG_MACH_PCAAXL3) += phytec-phycard-imx6/ obj-$(CONFIG_MACH_PCM037) += phytec-phycore-imx31/ obj-$(CONFIG_MACH_PCM038) += phytec-phycore-imx27/ obj-$(CONFIG_MACH_PCM043) += phytec-phycore-imx35/ diff --git a/arch/arm/boards/phytec-phycard-imx6/Makefile b/arch/arm/boards/phytec-phycard-imx6/Makefile new file mode 100644 index 0000000..01c7a25 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/Makefile @@ -0,0 +1,2 @@ +obj-y += board.o +lwl-y += lowlevel.o diff --git a/arch/arm/boards/phytec-phycard-imx6/board.c b/arch/arm/boards/phytec-phycard-imx6/board.c new file mode 100644 index 0000000..6ed431a --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/board.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2014 Christian Hemp, Phytec Messtechnik GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +static int phytec_pcaaxl3_init(void) +{ + if (!of_machine_is_compatible("phytec,imx6q-pcaaxl3")) + return 0; + + switch (bootsource_get()) { + case BOOTSOURCE_MMC: + of_device_enable_path("/chosen/environment-sd"); + break; + default: + case BOOTSOURCE_NAND: + of_device_enable_path("/chosen/environment-nand"); + break; + } + + imx6_bbu_nand_register_handler("nand", BBU_HANDLER_FLAG_DEFAULT); + + return 0; +} +device_initcall(phytec_pcaaxl3_init); + +static int phytec_pcaaxl3_core_init(void) +{ + if (!of_machine_is_compatible("phytec,imx6q-pcaaxl3")) + return 0; + + imx6_init_lowlevel(); + + return 0; +} +postcore_initcall(phytec_pcaaxl3_core_init); diff --git a/arch/arm/boards/phytec-phycard-imx6/env/boot/nand b/arch/arm/boards/phytec-phycard-imx6/env/boot/nand new file mode 100644 index 0000000..a51da9e --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/env/boot/nand @@ -0,0 +1,12 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + boot-menu-add-entry "$0" "Kernel:nand;rootfs:nand" + exit +fi + +global.bootm.image="/dev/nand0.kernel.bb" +#global.bootm.oftree="/env/oftree" +bootargs-ip +global.linux.bootargs.dyn.root="root=ubi0:root ubi.mtd=nand0.root rootfstype=ubifs" + diff --git a/arch/arm/boards/phytec-phycard-imx6/env/boot/sd-ext3 b/arch/arm/boards/phytec-phycard-imx6/env/boot/sd-ext3 new file mode 100644 index 0000000..fa1e9d6 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/env/boot/sd-ext3 @@ -0,0 +1,11 @@ +#!/bin/sh + +if [ "$1" = menu ]; then + boot-menu-add-entry "$0" "MMC (ext3)" + exit +fi + +global.bootm.image="/mnt/kernel/linuximage" +#global.bootm.oftree="/boot/oftree" +bootargs-ip +global.linux.bootargs.dyn.root="root=/dev/mmcblk0p2 rootfstype=ext3 rootwait" diff --git a/arch/arm/boards/phytec-phycard-imx6/env/config-board b/arch/arm/boards/phytec-phycard-imx6/env/config-board new file mode 100644 index 0000000..44008aa --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/env/config-board @@ -0,0 +1,7 @@ +#!/bin/sh + +# board defaults, do not change in running system. Change /env/config +# instead + +global.hostname=phyCARD-i.MX6 +global.linux.bootargs.base="console=ttymxc2,115200" diff --git a/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg new file mode 100644 index 0000000..481e085 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg @@ -0,0 +1,7 @@ +#define SETUP_1GIB_2GIB \ + wm 32 0x021b000c 0x54597955; \ + wm 32 0x021b0030 0x00591023; \ + wm 32 0x021b0040 0x00000027; \ + wm 32 0x021b0000 0x831a0000 + +#include "flash-header-phytec-pcaaxl3.h" diff --git a/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib.imxcfg b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib.imxcfg new file mode 100644 index 0000000..b21bd89 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib.imxcfg @@ -0,0 +1,7 @@ +#define SETUP_1GIB_2GIB \ + wm 32 0x021b000c 0x3a3f7975; \ + wm 32 0x021b0030 0x003f1023; \ + wm 32 0x021b0040 0x00000017; \ + wm 32 0x021b0000 0xc21a0000 + +#include "flash-header-phytec-pcaaxl3.h" diff --git a/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg new file mode 100644 index 0000000..858b6d7 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg @@ -0,0 +1,8 @@ + +#define SETUP_1GIB_2GIB \ + wm 32 0x021b000c 0x54597955; \ + wm 32 0x021b0030 0x00591023; \ + wm 32 0x021b0040 0x00000027; \ + wm 32 0x021b0000 0xc31a0000 + +#include "flash-header-phytec-pcaaxl3.h" diff --git a/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3.h b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3.h new file mode 100644 index 0000000..aecaf16 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/flash-header-phytec-pcaaxl3.h @@ -0,0 +1,97 @@ +soc imx6 +loadaddr 0x20000000 +dcdofs 0x400 + +wm 32 0x020e05a8 0x00000028 +wm 32 0x020e05b0 0x00000028 +wm 32 0x020e0524 0x00000028 +wm 32 0x020e051c 0x00000028 +wm 32 0x020e0518 0x00000028 +wm 32 0x020e050c 0x00000028 +wm 32 0x020e05b8 0x00000028 +wm 32 0x020e05c0 0x00000028 +wm 32 0x020e05ac 0x00000028 +wm 32 0x020e05b4 0x00000028 +wm 32 0x020e0528 0x00000028 +wm 32 0x020e0520 0x00000028 +wm 32 0x020e0514 0x00000028 +wm 32 0x020e0510 0x00000028 +wm 32 0x020e05bc 0x00000028 +wm 32 0x020e05c4 0x00000028 +wm 32 0x020e056c 0x00000028 +wm 32 0x020e0578 0x00000028 +wm 32 0x020e0588 0x00000028 +wm 32 0x020e0594 0x00000028 +wm 32 0x020e057c 0x00000028 +wm 32 0x020e0590 0x00003000 +wm 32 0x020e0598 0x00003000 +wm 32 0x020e058c 0x00000000 +wm 32 0x020e059c 0x00000028 +wm 32 0x020e05a0 0x00000028 +wm 32 0x020e0784 0x00000028 +wm 32 0x020e0788 0x00000028 +wm 32 0x020e0794 0x00000028 +wm 32 0x020e079c 0x00000028 +wm 32 0x020e07a0 0x00000028 +wm 32 0x020e07a4 0x00000028 +wm 32 0x020e07a8 0x00000028 +wm 32 0x020e0748 0x00000028 +wm 32 0x020e074c 0x00000028 +wm 32 0x020e0750 0x00020000 +wm 32 0x020e0758 0x00000000 +wm 32 0x020e0774 0x00020000 +wm 32 0x020e078c 0x00000028 +wm 32 0x020e0798 0x000c0000 +wm 32 0x021b081c 0x33333333 +wm 32 0x021b0820 0x33333333 +wm 32 0x021b0824 0x33333333 +wm 32 0x021b0828 0x33333333 +wm 32 0x021b481c 0x33333333 +wm 32 0x021b4820 0x33333333 +wm 32 0x021b4824 0x33333333 +wm 32 0x021b4828 0x33333333 +wm 32 0x021b0018 0x00091740 +wm 32 0x021b001c 0x00008000 +wm 32 0x021b0010 0xff328f64 +wm 32 0x021b0014 0x01ff00db +wm 32 0x021b002c 0x000026d2 +wm 32 0x021b0008 0x09444040 +wm 32 0x021b0004 0x00025576 + +SETUP_1GIB_2GIB + +wm 32 0x021b001c 0x04088032 +wm 32 0x021b001c 0x0408803a +wm 32 0x021b001c 0x00008033 +wm 32 0x021b001c 0x0000803b +wm 32 0x021b001c 0x00048031 +wm 32 0x021b001c 0x00048039 +wm 32 0x021b001c 0x09408030 +wm 32 0x021b001c 0x09408038 +wm 32 0x021b001c 0x04008040 +wm 32 0x021b001c 0x04008048 +wm 32 0x021b0800 0xa1390003 +wm 32 0x021b4800 0xa1380003 +wm 32 0x021b0020 0x00007800 +wm 32 0x021b0818 0x00011117 +wm 32 0x021b4818 0x00011117 +wm 32 0x021b083c 0x4350035e +wm 32 0x021b0840 0x035c0358 +wm 32 0x021b483c 0x436e0376 +wm 32 0x021b4840 0x03770352 +wm 32 0x021b0848 0x3c333436 +wm 32 0x021b4848 0x35332f3b +wm 32 0x021b0850 0x37363e39 +wm 32 0x021b4850 0x432f433d +wm 32 0x021b080c 0x0013001b +wm 32 0x021b0810 0x003b0034 +wm 32 0x021b480c 0x0037004b +wm 32 0x021b4810 0x004b0055 +wm 32 0x021b08b8 0x00000800 +wm 32 0x021b48b8 0x00000800 +wm 32 0x021b001c 0x00000000 +wm 32 0x021b0404 0x00011006 +wm 32 0x020e0010 0xf00000ff +wm 32 0x020e0018 0x007f007f +wm 32 0x020e001c 0x007f007f +wm 32 0x020c8000 0x80002021 diff --git a/arch/arm/boards/phytec-phycard-imx6/lowlevel.c b/arch/arm/boards/phytec-phycard-imx6/lowlevel.c new file mode 100644 index 0000000..14a9d84 --- /dev/null +++ b/arch/arm/boards/phytec-phycard-imx6/lowlevel.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2014 Christian Hemp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline void setup_uart(void) +{ + void __iomem *ccmbase = (void *)MX6_CCM_BASE_ADDR; + void __iomem *uartbase = (void *)MX6_UART3_BASE_ADDR; + void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR; + + writel(0x4, iomuxbase + 0x01f8); + + writel(0xffffffff, ccmbase + 0x68); + writel(0xffffffff, ccmbase + 0x6c); + writel(0xffffffff, ccmbase + 0x70); + writel(0xffffffff, ccmbase + 0x74); + writel(0xffffffff, ccmbase + 0x78); + writel(0xffffffff, ccmbase + 0x7c); + writel(0xffffffff, ccmbase + 0x80); + + writel(0x00000000, uartbase + 0x80); + writel(0x00004027, uartbase + 0x84); + writel(0x00000704, uartbase + 0x88); + writel(0x00000a81, uartbase + 0x90); + writel(0x0000002b, uartbase + 0x9c); + writel(0x00013880, uartbase + 0xb0); + writel(0x0000047f, uartbase + 0xa4); + writel(0x0000c34f, uartbase + 0xa8); + writel(0x00000001, uartbase + 0x80); + + putc_ll('>'); +} + +extern char __dtb_imx6q_phytec_pbaa03_start[]; + +static void __noreturn start_imx6q_phytec_pbaa03_common(uint32_t size) +{ + uint32_t fdt; + + arm_cpu_lowlevel_init(); + + arm_setup_stack(0x00920000 - 8); + + if (IS_ENABLED(CONFIG_DEBUG_LL)) + setup_uart(); + + fdt = (uint32_t)__dtb_imx6q_phytec_pbaa03_start - get_runtime_offset(); + + barebox_arm_entry(0x10000000, size, fdt); +} + +ENTRY_FUNCTION(start_phytec_pbaa03_1gib, r0, r1, r2) +{ + start_imx6q_phytec_pbaa03_common(SZ_1G); +} + +ENTRY_FUNCTION(start_phytec_pbaa03_1gib_1bank, r0, r1, r2) +{ + start_imx6q_phytec_pbaa03_common(SZ_1G); +} + +ENTRY_FUNCTION(start_phytec_pbaa03_2gib, r0, r1, r2) +{ + start_imx6q_phytec_pbaa03_common(SZ_2G); +} diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig index f29c968..dbdc957 100644 --- a/arch/arm/configs/imx_v7_defconfig +++ b/arch/arm/configs/imx_v7_defconfig @@ -5,6 +5,7 @@ CONFIG_MACH_FREESCALE_MX51_PDK=y CONFIG_MACH_FREESCALE_MX53_LOCO=y CONFIG_MACH_TQMA53=y CONFIG_MACH_FREESCALE_MX53_VMX53=y +CONFIG_MACH_PCAAXL3=y CONFIG_MACH_PHYTEC_PFLA02=y CONFIG_MACH_DFI_FS700_M60=y CONFIG_MACH_GUF_SANTARO=y diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 58dc38b..63fe854 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -27,7 +27,8 @@ dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \ imx6q-nitrogen6x.dtb \ imx6dl-nitrogen6x.dtb \ imx6q-udoo.dtb \ - imx6q-var-custom.dtb + imx6q-var-custom.dtb \ + imx6q-phytec-pbaa03.dtb dtb-$(CONFIG_ARCH_MVEBU) += dove-cubox-bb.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb @@ -65,6 +66,7 @@ pbl-$(CONFIG_MACH_GUF_SANTARO) += imx6q-guf-santaro.dtb.o pbl-$(CONFIG_MACH_NITROGEN6X) += imx6q-nitrogen6x.dtb.o imx6dl-nitrogen6x.dtb.o pbl-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o pbl-$(CONFIG_MACH_VARISCITE_MX6) += imx6q-var-custom.dtb.o +pbl-$(CONFIG_MACH_PCAAXL3) += imx6q-phytec-pbaa03.dtb.o .SECONDARY: $(obj)/$(BUILTIN_DTB).dtb.S .SECONDARY: $(patsubst %,$(obj)/%.S,$(dtb-y)) diff --git a/arch/arm/dts/imx6q-phytec-pbaa03.dts b/arch/arm/dts/imx6q-phytec-pbaa03.dts new file mode 100644 index 0000000..bcb3dd7 --- /dev/null +++ b/arch/arm/dts/imx6q-phytec-pbaa03.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2014 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q-phytec-pcaaxl3.dtsi" + +/ { + model = "Phytec phyCARD-i.MX6 Quad Carrier-Board"; + compatible = "phytec,imx6q-pbaa03", "phytec,imx6q-pcaaxl3", "fsl,imx6q"; + + chosen { + linux,stdout-path = &uart3; + }; +}; + +&fec { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi new file mode 100644 index 0000000..e497898 --- /dev/null +++ b/arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright 2014444 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6q.dtsi" + +/ { + model = "Phytec phyCARD-i.MX6 Quad"; + compatible = "phytec,imx6q-pcaaxl3", "fsl,imx6q"; + + chosen { + environment-sd { + compatible = "barebox,environment"; + device-path = &usdhc3, "partname:barebox-environment"; + status = "disabled"; + }; + + environment-nand { + compatible = "barebox,environment"; + device-path = &gpmi, "partname:barebox-environment"; + status = "disabled"; + }; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + + eeprom: m24c32@50 { + compatible = "st,24c32", "at24"; + reg = <0x50>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx6q-phytec-pcaaxl3 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_ENET_PINGRP5 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3 0x1b0b0 + MX6QDL_PAD_KEY_ROW1__ENET_COL 0x1b0b0 + MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2 0x1b0b0 + MX6QDL_PAD_KEY_COL3__ENET_CRS 0x1b0b0 + MX6QDL_PAD_GPIO_18__ENET_RX_CLK 0x1b0b0 + MX6QDL_PAD_GPIO_19__ENET_TX_ER 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpmigrp { + fsl,pins = ; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = ; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = ; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_USDHC3_PINGRP_D4 + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x80000000 /* CD */ + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "mii"; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0x400000>; + }; + + partition@1 { + label = "barebox-environment"; + reg = <0x400000 0x20000>; + }; + + partition@2 { + label = "kernel"; + reg = <0x420000 0x800000>; + }; + + partition@3 { + label = "root"; + reg = <0xC20000 0x0>; + }; +}; + +&ocotp { + barebox,provide-mac-address = <&fec 0x620>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio5 22 0>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0x80000>; + }; + partition@1 { + label = "barebox-environment"; + reg = <0x80000 0x80000>; + }; +}; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index d40c944..a64cf30 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -40,6 +40,7 @@ config ARCH_TEXT_BASE default 0x4fc00000 if MACH_DFI_FS700_M60 default 0x4fc00000 if MACH_UDOO default 0x4fc00000 if MACH_VARISCITE_MX6 + default 0x4fc00000 if MACH_PCAAXL3 config ARCH_IMX_INTERNAL_BOOT bool "support internal boot mode" @@ -208,6 +209,10 @@ config MACH_FREESCALE_MX53_VMX53 Say Y here if you are using the Voipac Technologies X53-DMM-668 module equipped with a Freescale i.MX53 Processor +config MACH_PCAAXL3 + bool "Phytec phyCARD-i.MX6 Quad" + select ARCH_IMX6 + config MACH_PHYTEC_PFLA02 bool "Phytec phyFLEX-i.MX6" select ARCH_IMX6 diff --git a/images/Makefile.imx b/images/Makefile.imx index 06794fd..0b24a34 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -166,3 +166,19 @@ pblx-$(CONFIG_MACH_VARISCITE_MX6) += start_variscite_custom CFG_start_variscite_custom.pblx.imximg = $(board)/variscite-mx6/flash-header-variscite.imxcfg FILE_barebox-variscite-custom.img = start_variscite_custom.pblx.imximg image-$(CONFIG_MACH_VARISCITE_MX6) += barebox-variscite-custom.img + +pblx-$(CONFIG_MACH_PCAAXL3) += start_phytec_pbaa03_1gib +CFG_start_phytec_pbaa03_1gib.pblx.imximg = $(board)/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib.imxcfg +FILE_barebox-phytec-pbaa03-1gib.img = start_phytec_pbaa03_1gib.pblx.imximg +image-$(CONFIG_MACH_PCAAXL3) += barebox-phytec-pbaa03-1gib.img + +pblx-$(CONFIG_MACH_PCAAXL3) += start_phytec_pbaa03_1gib_1bank +CFG_start_phytec_pbaa03_1gib_1bank.pblx.imximg = $(board)/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-1gib-1bank.imxcfg +FILE_barebox-phytec-pbaa03-1gib-1bank.img = start_phytec_pbaa03_1gib_1bank.pblx.imximg +image-$(CONFIG_MACH_PCAAXL3) += barebox-phytec-pbaa03-1gib-1bank.img + +pblx-$(CONFIG_MACH_PCAAXL3) += start_phytec_pbaa03_2gib +CFG_start_phytec_pbaa03_2gib.pblx.imximg = $(board)/phytec-phycard-imx6/flash-header-phytec-pcaaxl3-2gib.imxcfg +FILE_barebox-phytec-pbaa03-2gib.img = start_phytec_pbaa03_2gib.pblx.imximg +image-$(CONFIG_MACH_PCAAXL3) += barebox-phytec-pbaa03-2gib.img + -- 1.7.0.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox